Tukkilajittelun röntgenmittauksen hyödyntäminen, tapaus Korkeakosken saha

Diplomityön tavoitteena oli selvittää työn toimeksiantajan UPM, Korkeakosken sahan röntgenmittauslaitteen oksaindeksilajitteluparametrille lukuarvo, jolla päästään A-tukkien osalta tavoiteltuun sydänsahatavaralaatujakaumaan eli saadaan siirrettyä VI- sydänsahatavaralaatu B-tukkien joukkoon. Lisäksi työssä tutkittiin sahan tukkilajittelun röntgenmittauslaitteen mittauksen toimivuutta ja sen tehokkaampaa hyödyntämistä. Korkeakosken sahan käyttämä röntgenmittauslaite on Bintec Oy:n kehittämä ja on tyypiltään Wood-X-4D. Laitteen mittaus perustuu tukin kuvaamiseen viipaleinaeli tomografiamittaukseen. Laite mittaa tukista useita ominaisuuksia ja antaa niiden perusteella lajitteluparametreille lukuarvoja. Lajitteluparametriarvojen muuttaminen vaikuttaa syntyvään sydänsahatavaralaatujakaumaan. Työ suoritettiin röntgenmittauslaitteella tekemällä tukeille toistomittauksia ja lajittelukokeita. Kokeissa käytettävät tukit olivat halkaisijaltaan 230 mm - tukkiluokasta. Tukkeja lajiteltiin eri tukkilaatulajitteluasetuksilla, jolloin seurattiin niistä sahattavia sahatavaralaatuja. Sahatavaralaatujen määrityksessä käytettiin sahaosastolla olevaa Finscan Oy:n kehittämää BoardMaster-NT-lajittelumittalaitetta. Tutkimus osoitti, että oksaindeksin pudottamisella, ei päästy työnantajan asettamaan sydänsahatavaran laatulajittelutavoitteeseen sallituissa oksaindeksirajoissa. Tavoitteen saavuttaminen olisi edellyttänyt oksaindeksin arvon pudottamista selkeästi alle asetetun 28 rajan. Tutkimustulokset osoittivat, että röntgenmittalaitteen lajitteluparametrien toiminnan varmuus vaihteli merkittävästi riippuen käytettävästä parametrista ja että laitteen mittaustarkkuus kärsi laitteen yleiseksi viaksi todetun detektorivian myötä. Täten tarkka laatulajittelu edellyttää röntgenmittalaitteen kaikkia neljää toimivaa detektoria. Tämä pystytään varmistamaanvaradetektorilla.

Raman spectroscopy and microspectroscopy of reactive dyes on cotton fibres: analysis and detection limits

A collaborative study on Raman spectroscopy and microspectrophotometry (MSP) was carried out by members of the ENFSI (European Network of Forensic Science Institutes) European Fibres Group (EFG) on different dyed cotton fabrics. The detection limits of the two methods were tested on two cotton sets with a dye concentration ranging from 0.5 to 0.005% (w/w). This survey shows that it is possible to detect the presence of dye in fibres with concentrations below that detectable by the traditional methods of light microscopy and microspectrophotometry (MSP). The MSP detection limit for the dyes used in this study was found to be a concentration of 0.5% (w/w). At this concentration, the fibres appear colourless with light microscopy. Raman spectroscopy clearly shows a higher potential to detect concentrations of dyes as low as 0.05% for the yellow dye RY145 and 0.005% for the blue dye RB221. This detection limit was found to depend both on the chemical composition of the dye itself and on the analytical conditions, particularly the laser wavelength. Furthermore, analysis of binary mixtures of dyes showed that while the minor dye was detected at 1.5% (w/w) (30% of the total dye concentration) using microspectrophotometry, it was detected at a level as low as 0.05% (w/w) (10% of the total dye concentration) using Raman spectroscopy. This work also highlights the importance of a flexible Raman instrument equipped with several lasers at different wavelengths for the analysis of dyed fibres. The operator and the set up of the analytical conditions are also of prime importance in order to obtain high quality spectra. Changing the laser wavelength is important to detect different dyes in a mixture.

Torque vibration model of axial-flux surface-mounted permanent magnet synchronous machine

In order that the radius and thus ununiform structure of the teeth and otherelectrical and magnetic parts of the machine may be taken into consideration the calculation of an axial flux permanent magnet machine is, conventionally, doneby means of 3D FEM-methods. This calculation procedure, however, requires a lotof time and computer recourses. This study proves that also analytical methods can be applied to perform the calculation successfully. The procedure of the analytical calculation can be summarized into following steps: first the magnet is divided into slices, which makes the calculation for each section individually, and then the parts are submitted to calculation of the final results. It is obvious that using this method can save a lot of designing and calculating time. Thecalculation program is designed to model the magnetic and electrical circuits of surface mounted axial flux permanent magnet synchronous machines in such a way, that it takes into account possible magnetic saturation of the iron parts. Theresult of the calculation is the torque of the motor including the vibrations. The motor geometry and the materials and either the torque or pole angle are defined and the motor can be fed with an arbitrary shape and amplitude of three-phase currents. There are no limits for the size and number of the pole pairs nor for many other factors. The calculation steps and the number of different sections of the magnet are selectable, but the calculation time is strongly depending on this. The results are compared to the measurements of real prototypes. The permanent magnet creates part of the flux in the magnetic circuit. The form and amplitude of the flux density in the air-gap depends on the geometry and material of the magnetic circuit, on the length of the air-gap and remanence flux density of the magnet. Slotting is taken into account by using the Carter factor in the slot opening area. The calculation is simple and fast if the shape of the magnetis a square and has no skew in relation to the stator slots. With a more complicated magnet shape the calculation has to be done in several sections. It is clear that according to the increasing number of sections also the result will become more accurate. In a radial flux motor all sections of the magnets create force with a same radius. In the case of an axial flux motor, each radial section creates force with a different radius and the torque is the sum of these. The magnetic circuit of the motor, consisting of the stator iron, rotor iron, air-gap, magnet and the slot, is modelled with a reluctance net, which considers the saturation of the iron. This means, that several iterations, in which the permeability is updated, has to be done in order to get final results. The motor torque is calculated using the instantaneous linkage flux and stator currents. Flux linkage is called the part of the flux that is created by the permanent magnets and the stator currents passing through the coils in stator teeth. The angle between this flux and the phase currents define the torque created by the magnetic circuit. Due to the winding structure of the stator and in order to limit the leakage flux the slot openings of the stator are normally not made of ferromagnetic material even though, in some cases, semimagnetic slot wedges are used. In the slot opening faces the flux enters the iron almost normally (tangentially with respect to the rotor flux) creating tangential forces in the rotor. This phenomenon iscalled cogging. The flux in the slot opening area on the different sides of theopening and in the different slot openings is not equal and so these forces do not compensate each other. In the calculation it is assumed that the flux entering the left side of the opening is the component left from the geometrical centre of the slot. This torque component together with the torque component calculated using the Lorenz force make the total torque of the motor. It is easy to assume that when all the magnet edges, where the derivative component of the magnet flux density is at its highest, enter the slot openings at the same time, this will have as a result a considerable cogging torque. To reduce the cogging torquethe magnet edges can be shaped so that they are not parallel to the stator slots, which is the common way to solve the problem. In doing so, the edge may be spread along the whole slot pitch and thus also the high derivative component willbe spread to occur equally along the rotation. Besides forming the magnets theymay also be placed somewhat asymmetric on the rotor surface. The asymmetric distribution can be made in many different ways. All the magnets may have a different deflection of the symmetrical centre point or they can be for example shiftedin pairs. There are some factors that limit the deflection. The first is that the magnets cannot overlap. The magnet shape and the relative width compared to the pole define the deflection in this case. The other factor is that a shifting of the poles limits the maximum torque of the motor. If the edges of adjacent magnets are very close to each other the leakage flux from one pole to the other increases reducing thus the air-gap magnetization. The asymmetric model needs some assumptions and simplifications in order to limit the size of the model and calculation time. The reluctance net is made for symmetric distribution. If the magnets are distributed asymmetrically the flux in the different pole pairs will not be exactly the same. Therefore, the assumption that the flux flows from the edges of the model to the next pole pairs, in the calculation model from one edgeto the other, is not correct. If it were wished for that this fact should be considered in multi-pole pair machines, this would mean that all the poles, in other words the whole machine, should be modelled in reluctance net. The error resulting from this wrong assumption is, nevertheless, irrelevant.

Analysing knowledge building: usages, achievements and limits of forums at university

This paper aims to explore asynchronous communication in computer supported collaborative learning (CSCL). Thirty virtual forums are analysed in both a quantitative and a qualitative way. Quantitatively, the number of messages written, message threads and original and answer messages are counted. Qualitatively, the content of the notes is analysed, cataloguing these into two different levels: on the one hand, as a set of knowledge building process categories, and on the other hand, following the scaffolds that Knowledge Forum offers. The results show that both an exchange of information and a collaborative work take place. Nevertheless, the construction of knowledge is superficial.

Informing patients about limits to confidentiality: A qualitative study in prisons.

AIM: Confidentiality is important in healthcare practice, however, under certain circumstances, confidentiality is breached. In this paper, mental health professionals' (MHPs) practices related to informing imprisoned patients about confidentiality and its limits are presented. METHODS: Twenty-four MHPs working in Swiss prisons were interviewed. Data analysis involved qualitative thematic coding and was validated by discussing results with external experts and study participants. RESULTS: For expert evaluations and court-ordered therapies, participants informed patients that information revealed during these consultations is not bound by confidentiality rules. The practice of routinely informing patients about confidentiality and its limits became more complex in voluntary therapies, for which participants described four approaches and provided justifications in favour of or against their use. CONCLUSIONS: Further training and continued education are needed to improve physicians' ethical and legal knowledge about confidentiality disclosures. In order to promote ethical practices, it is important to understand and address existing motivations, attitudes and behaviours that impede appropriate patient information. Our study adds important new knowledge about the limits to confidentiality, particularly for providers working with vulnerable populations. Results from this study reflect typical ethical and practical dilemmas faced by and of interest to physicians working in forensic medicine and other related settings.

The development of decision limits for the GH-2000 detection methodology using additional insulin-like growth factor-I and amino-terminal pro-peptide of type III collagen assays.

The GH-2000 and GH-2004 projects have developed a method for detecting GH misuse based on measuring insulin-like growth factor-I (IGF-I) and the amino-terminal pro-peptide of type III collagen (P-III-NP). The objectives were to analyze more samples from elite athletes to improve the reliability of the decision limit estimates, to evaluate whether the existing decision limits needed revision, and to validate further non-radioisotopic assays for these markers. The study included 998 male and 931 female elite athletes. Blood samples were collected according to World Anti-Doping Agency (WADA) guidelines at various sporting events including the 2011 International Association of Athletics Federations (IAAF) World Athletics Championships in Daegu, South Korea. IGF-I was measured by the Immunotech A15729 IGF-I IRMA, the Immunodiagnostic Systems iSYS IGF-I assay and a recently developed mass spectrometry (LC-MS/MS) method. P-III-NP was measured by the Cisbio RIA-gnost P-III-P, Orion UniQ? PIIINP RIA and Siemens ADVIA Centaur P-III-NP assays. The GH-2000 score decision limits were developed using existing statistical techniques. Decision limits were determined using a specificity of 99.99% and an allowance for uncertainty because of the finite sample size. The revised Immunotech IGF-I - Orion P-III-NP assay combination decision limit did not change significantly following the addition of the new samples. The new decision limits are applied to currently available non-radioisotopic assays to measure IGF-I and P-III-NP in elite athletes, which should allow wider flexibility to implement the GH-2000 marker test for GH misuse while providing some resilience against manufacturer withdrawal or change of assays. Copyright © 2015 John Wiley & Sons, Ltd.

Effects of the 80 km/h and variable speed limits on air pollution in the metropolitan area of Barcelona

In 2008 the regional government of Catalonia (Spain) reduced the maximum speed limit on several stretches of congested urban motorway in the Barcelona metropolitan area to 80 km/h, while in 2009 it introduced a variable speed system on other stretches of its metropolitan motorways. We use the differences-in-differences method, which enables a policy impact to be measured under specific conditions, to assess the impact of these policies on emissions of NOx and PM10. Empirical estimation indicate that reducing the speed limit to 80 km h-1 causes a 1.7 to 3.2% increase in NOx and 5.3 to 5.9% in PM10. By contrast, the variable speed policy reduced NOx and PM10 pollution by 7.7 to 17.1% and 14.5 to 17.3%. As such, a variable speed policy appears to be a more effective environmental policy than reducing the speed limit to a maximum of 80 km/h.

L'utilisation des anticoagulants oraux directs chez les patients âgés : les limites de la médecine fondée sur les preuves [The use of the new direct oral anticoagulants among older subjects: The limits of the evidence-based medicine?].

The growing use of direct oral anticoagulants, in particular among older subjects, raises questions about the limits of the evidence-based medicine. The phase III studies that have validated the efficacy and the safety profile of these molecules (dabigatran, rivaroxaban, apixaban, edoxaban) in their both indications, the venous thromboembolic disease and the non-valvular atrial fibrillation raise concerns in four major fields: the financial support of pharmaceutical companies, the links of interest for many authors with the industry, the study design (exclusively non-inferiority studies), and the poor representativeness of the older subjects included. All these points are discussed, using data of sub-groups studies, post-marketing studies and recent meta-analysis. The lack of data for the very old subjects, with frailty or comorbidities, remains the main concern from these phase III studies.

Indications et limites de la thoracoscopie en 1994. [Indications and limits of thracoscopy in 1994.]

Reléguée au rang de moyen diagnostique occasionnel avec l'avènement de la streptomycine dès 1945, la thoracoscopie a repris depuis trois à cinq ans un rôle prépondérant dans l'armement du chirurgien thoracique, comme moyen diagnostique et surtout comme outil thérapeutique. Dans cet article, nous faisons le point quant à la place actuelle de la thoracoscopie face aux différentes pathologies thoraciques, pulmonaires, médiastinales et oesophagiennes. Dans certaines indications (pneumothorax, infiltrats pulmonaires diffus, nodule pulmonaire isolé), cette technique en pleine expansion a déjà clairement démontré sa supériorité. Dans d'autres cas, en particulier dans les affections néoplasiques, son application est encore le sujet de controverses.

The environmental effects of changing speed limits: a quantile regression approach

Two speed management policies were implemented in the metropolitan area of Barcelona aimed at reducing air pollution concentration levels. In 2008, the maximum speed limit was reduced to 80 km/h and, in 2009, a variable speed system was introduced on some metropolitan motorways. This paper evaluates whether such policies have been successful in promoting cleaner air, not only in terms of mean pollutant levels but also during high and low pollution episodes. We use a quantile regression approach for fixed effect panel data. We find that the variable speed system improves air quality with regard to the two pollutants considered here, being most effective when nitrogen oxide levels are not too low and when particulate matter concentrations are below extremely high levels. However, reducing the maximum speed limit from 120/100 km/h to 80 km/h has no effect – or even a slightly increasing effect –on the two pollutants, depending on the pollution scenario. Length: 32 pages

Social Preferences and Transport Policy: The case of US speed limits

This article, in reviewing the longrunning US debate on speed limits, illustrates how a different valuation of the trade-off between private mobility needs and safety concerns can shape transport policies. It is argued that the regulatory decentralization debate, together with the speed limit in force in each state, obey the social preferences and valuation given to this tradeoff. Such a view is consistent with evidence that higher speed limits are to be found in states with greater private mobility needs, even though their fatality rates might be among the highest in the country. By contrast, lower speed limits and supporters of a low national speed limit are to be found in states that show a greater concern for safety outcomes and which are less dependent on private mobility. By reviewing these events and examining the role played by the main actors and analyzing their motivations, the article identifies important lessons for similar future discussions on transport policy.

Método multirresíduo para monitoramento de contaminação ambiental de pesticidas na região de Bauru (SP) usando mel como bio-indicador

The presence of residues of the major groups of pesticides (organohalogen, organophosphorous, pyrethroids and organonitrogen) in representative samples of honey produced in Bauru (state of São Paulo, Brazil) was investigated from 1999 through2004. A multiresidue method was applied to honey samples to determine 48 pesticides with recoveries ranging from 76 to 95%. The limits of detection found were lower than 10 µg/kg for GC-MS-SIM. The results indicated that most pesticides found in the samples belonged to the organohalogen and organonitrogen groups. Residues of malathion were detected in almost all of the samples in high concentration.