Investigating the effects of caffeine on executive functions using traditional Stroop and a new ecologically-valid virtual reality task, the Jansari assessment of Executive Functions (JEF©)

Objective: Caffeine has been shown to have effects on certain areas of cognition, but in executive functioning the research is limited and also inconsistent. One reason could be the need for a more sensitive measure to detect the effects of caffeine on executive function. This study used a new non-immersive virtual reality assessment of executive functions known as JEF© (the Jansari Assessment of Executive Function) alongside the ‘classic’ Stroop Colour- Word task to assess the effects of a normal dose of caffeinated coffee on executive function. Method: Using a double-blind, counterbalanced within participants procedure 43 participants were administered either a caffeinated or decaffeinated coffee and completed the ‘JEF©’ and Stroop tasks, as well as a subjective mood scale and blood pressure pre- and post condition on two separate occasions a week apart. JEF© yields measures for eight separate aspects of executive functions, in addition to a total average score. Results: Findings indicate that performance was significantly improved on the planning, creative thinking, event-, time- and action-based prospective memory, as well as total JEF© score following caffeinated coffee relative to the decaffeinated coffee. The caffeinated beverage significantly decreased reaction times on the Stroop task, but there was no effect on Stroop interference. Conclusion: The results provide further support for the effects of a caffeinated beverage on cognitive functioning. In particular, it has demonstrated the ability of JEF© to detect the effects of caffeine across a number of executive functioning constructs, which weren’t shown in the Stroop task, suggesting executive functioning improvements as a result of a ‘typical’ dose of caffeine may only be detected by the use of more real-world, ecologically valid tasks.

Competency Based Assessment Using Virtual Reality (VERT): Is It a Realistic Possibility ?

The education of the radiography profession is based within higher education establishments, yet a critical part of all radiography programmes is the clinical component where students learn the practical skills of the profession. Assessments therefore not only have to assess a student’s knowledge, but also their clinical competence and core skills in line with both Health and Care Professions Council and the Society and College of Radiographers requirements. This timely thesis examines the possibility of using the Virtual Environment for RadioTherapy (VERT) as an assessment tool to evaluate a student’s competence so giving the advantage of a standard assessment and relieving time pressures in the clinical department. A mixed methods approach was taken which can be described as a Quantitative Qualitative design with the emphasis being on the Quantitative element; a so called QUAN  qual design. The quantitative evaluation compared two simulations, one in the virtual reality environment and another in the department using a real treatment machine. Students were asked to perform two electron setups in each simulation; the order being randomly decided and so the study would be described as a randomised cross-over design. Following this, qualitative data was collected in student focus groups to explore student perspectives in more depth. Findings indicated that the performance between the two simulators was significantly different, p < 0∙001; the virtual simulation scoring significantly lower than the hospital based simulation overall and in virtually all parameters being assessed. Thematic analysis of the qualitative data supported this finding and identified 4 main themes; equipment use, a lack of reality, learning opportunities and assessment of competence. One other sub-theme identified for reality was that of the environment and senses.

Efeitos da realidade virtual na reabilitação em indivíduos pós-AVE

Projeto de Graduação apresentado à Universidade Fernando Pessoa como parte dos requisitos para obtenção do grau de Licenciada em Fisioterapia

The development and evaluation of a medical imaging training immersive environment

Introduction A novel realistic 3D virtual reality (VR) application has been developed to allow medical imaging students at Queensland University of Technology to practice radiographic techniques independently outside the usual radiography laboratory. Methods A flexible agile development methodology was used to create the software rapidly and effectively. A 3D gaming environment and realistic models were used to engender presence in the software while tutor-determined gold standards enabled students to compare their performance and learn in a problem-based learning pedagogy. Results Students reported high levels of satisfaction and perceived value and the software enabled up to 40 concurrent users to prepare for clinical practice. Student feedback also indicated that they found 3D to be of limited value in the desktop version compared to the usual 2D approach. A randomised comparison between groups receiving software-based and traditional practice measured performance in a formative role play with real equipment. The results of this work indicated superior performance with the equipment for the VR trained students (P = 0.0366) and confirmed the value of VR for enhancing 3D equipment-based problem-solving skills. Conclusions Students practising projection techniques virtually performed better at role play assessments than students practising in a traditional radiography laboratory only. The application particularly helped with 3D equipment configuration, suggesting that teaching 3D problem solving is an ideal use of such medical equipment simulators. Ongoing development work aims to establish the role of VR software in preparing students for clinical practice with a range of medical imaging equipment.

MITIE C-Arm - Advanced innovation in education

Aim: In 2013 QUT introduced the Medical Imaging Training Immersive Environment (MITIE) as a virtual reality (VR) platform that allowed students to practice general radiography. The system software has been expanded to now include C-Arm. The aim of this project was to investigate the use of this technology in the pedagogy of undergraduate medical imaging students who have limited to no experience in the use of the C-Arm clinically. Method: The Medical Imaging Training Immersive Environment (MITIE) application provides students with realistic and fully interactive 3D models of C-Arm equipment. As with VR initiatives in other health disciplines (1–2) the software mimics clinical practice as much as possible and uses 3D technology to enhance 3D spatial awareness and realism. The application allows students to set up and expose a virtual patient in a 3D environment as well as creating the resultant “image” for comparison with a gold standard. Automated feedback highlights ways for the student to improve their patient positioning, equipment setup or exposure factors. The students' equipment knowledge was tested using an on line assessment quiz and surveys provided information on the students' pre-clinical confidence scale, with post-clinical data comparisons. Ethical approval for the project was provided by the university ethics panel. Results: This study is currently under way and this paper will present analysis of initial student feedback relating to the perceived value of the application for confidence in a high risk environment (i.e. operating theatre) and related clinical skills development. Further in-depth evaluation is ongoing with full results to be presented. Conclusion: MITIE C-Arm has a development role to play in the pre-clinical skills training for Medical Radiation Science students. It will augment their theoretical understanding prior to their clinical experience. References 1. Bridge P, Appleyard R, Ward J, Phillips R, Beavis A. The development and evaluation of a virtual radiotherapy treatment machine using an immersive visualisation environment. Computers and Education 2007; 49(2): 481–494. 2. Gunn T, Berry C, Bridge P et al. 3D Virtual Radiography: Development and Initial Feedback. Paper presented at the 10th Annual Scientific Meeting of Medical Imaging and Radiation Therapy, March 2013 Hobart, Tasmania.

基于Vega Prime的多水下机器人视景仿真系统的设计与实现

介绍了一套多水下机器人三维视景仿真系统。该系统采用虚拟现实技术，利用虚拟仿真软件VegaPrime 与Visual C++.NET 2003 混合编程实现三维视景仿真。它主要用于海洋环境的模拟和多水下机器人运行时的位姿更新、碰撞检测、环境效果及各种特效的实时显示。此外，它还具有响应各种输入/输出设备的功能和通过人性化图形界面接口与用户进行交互的功能。

表征方式对网上购物信息搜索行为影响的工程心理学实验研究

Interface has been becoming a more significant element today which influences the development of shopping on-line greatly. But in practice the attention arisen from society and study made are quite inadequate. Under this circumstance, I focus my study on the purpose of improving understanding of the engineering psychological factors, which definitely will play a crucial role in shopping on-line representation in future, and of the relations between them through the following experimental research. I hope it can give a basic reference to the practical application of shopping on-line representation pattern and continuous study. In current thesis, an analysis was made on the basis of engineering psychology principles from three aspects, i.e. person (users), task and information environment. It was considered that system overview and information behavior model would have great impact on the activities of users on the web and that representation pattern of information system would affect the forming of system overview and behavior pattern and then further after the performances of users in information system. Based on above-mentioned statement, a three-dimensional conceptual model was presented which demonstrates the relations between the crucial factors, which are media representation pattern, system hierarchy and objects in information unit. Thereafter, eight study hypothesis, which are about engineering psychological factors of virtual reality (VR) representation in shopping on-line system, was taken out and four experiments were followed up to testify the hypothesis. -In experiment one, a research was made to study how the three kinds of single media representation pattern influence the forming of system overview and information behavior from the point view of task performance, operating error, overall satisfactory and mental workload etc. -In experiment two, a study of how the combined media representation pattern of system hierarchy influences users' behavior was carried out. -In experiment three, a study of the hierarchy structure feature of VR representation pattern and the tendency of its width and depth to the effects of system behavior was made. -In experiment four, a study of the location relations between different parties in VR scene (information unit) was made. The result is as follows: -During structure dimensional state: Width-increasing caused more damage to the speed of users than depth-increasing in VR representation pattern. Although the performance of subjects was quite slow in wider environment, yet the percentage rate of causing errors was in lowest level. -During hierarchy representation pattern: 1. Between the representation patterns of the three media, no significant differences was found in terms of the speed of fulfilling the task, error rate, satisfactory, mental workload etc. But the pattern with figure- aided gained the worst results on all of these aspects. 2. During primary stage of the task and the first level of the hierarchy, the speed of subjects' performance in VR pattern was slower than that in text pattern. While with developing of the task and going deeper level of the hierarchy, the speed of users' performance in VR representation pattern reached to the highest level. 3. Effects in VR representation pattern was better than that in text pattern in higher level of the system. The representation pattern in highest level has greatest impact on the performance of the system behavior, whereas results of the only VR representation in the middle part of hierarchy would be worst. 4. Activity error in single media representation pattern was more than that in combined media representation pattern. 5. Individual differences among subjects had effects on the representation pattern of the system. During VR environment, behavior tendency of party A had a significant negative correlation to the quantities of errors. -In VR-scene representation: Physical-distance and flash influenced the subjects' task performance greatly, while psychological-distance has no outstanding impact. Subjects' accurate rate of performing increased if objects with same relation were in the same structure position, in the state of close psychological-distance or if the object target flashed (not reliable). Although the article limits the topic only on the present-existing questions and analysis of shopping-on-line, as a matter of fact, it can also apply for other relevant purposes on the web. While the study of this article only gives its emphasis on the researching-task with definite goal, making no consideration of other task conditions and their relations with other navigation tools. So I hope it lay a good start to make continuous research in this areas.

An Affordance Based Approach to Decision Making in Sport: Discussing a Novel Methodological Framework

Decision making is a fundamental clement of any sport, particularly open, fast, dynamic team sports such as football, basketball and rugby. At the elite level, athletes appear to consistently make good decisions in situations that are highly temporally constrained. To further understand how this is done has been the aim of researchers within the perception-action field for several decades. The purpose of this article is to present novel contributions, both theoretical and methodological, that are pushing the boundaries of this area of research. The theoretical framework (Ecological psychology) within which the work is posited will be described, followed by a description of Virtual Reality (VR) technology and how it relates to the theoretical aims. Finally, an applied example will be summarised in order to demonstrate how the theoretical approach and the methodological approach come together in practice.

The role of sleep and dreaming in the processing of episodic memory

La présente thèse examine les liens entre le sommeil, la mémoire épisodique et les rêves. Dans une première étude, nous utilisons les technologies de la réalité virtuelle (RV) en liaison avec un paradigme de privation de sommeil paradoxal et de collecte de rêve en vue d'examiner l'hypothèse que le sommeil paradoxal et le rêve sont impliqués dans la consolidation de la mémoire épisodique. Le sommeil paradoxal a été associé au rappel des aspects spatiaux des éléments émotionnels de la tâche RV. De la même façon, l'incorporation de la tâche RV dans les rêves a été associée au rappel des aspects spatiaux de la tâche. De plus, le rappel des aspects factuels et perceptuels de la mémoire épisodique, formé lors de la tâche VR, a été associé au sommeil aux ondes lentes. Une deuxième étude examine l'hypothèse selon laquelle une fonction possible du rêve pourrait être de créer de nouvelles associations entre les éléments de divers souvenirs épisodiques. Un participant a été réveillé 43 fois lors de l'endormissement pour fournir des rapports détaillés de rêves. Les résultats suggèrent qu'un seul rêve peut comporter, dans un même contexte spatiotemporel, divers éléments appartenant aux multiples souvenirs épisodiques. Une troisième étude aborde la question de la cognition lors du sommeil paradoxal, notamment comment les aspects bizarres des rêves, qui sont formés grâce aux nouvelles combinaisons d'éléments de la mémoire épisodique, sont perçus par le rêveur. Les résultats démontrent une dissociation dans les capacités cognitives en sommeil paradoxal caractérisée par un déficit sélectif dans l'appréciation des éléments bizarres des rêves. Les résultats des quatre études suggèrent que le sommeil aux ondes lentes et le sommeil paradoxal sont différemment impliqués dans le traitement de la mémoire épisodique. Le sommeil aux ondes lentes pourrait être implique dans la consolidation de la mémoire épisodique, et le sommeil paradoxal, par l'entremise du rêve, pourrais avoir le rôle d'introduire de la flexibilité dans ce système mnémonique.

Konzept und Prototyp eines interoperablen und offenen Simulationssystems

Simulation hat sich in der Vergangenheit als unterstützendes Planungsinstrument und Prognosemethode zur Untersuchung von Materialflusssystemen in verschiedenen Branchen etabliert. Dafür werden neben Simulationswerkzeugen auch zunehmend Virtual Reality (VR), insbesondere mit dem Ansatz Digitale Fabrik, eingesetzt. Ein Materialflusssimulator, der für den VR–Einsatz geeignet ist,existiert noch nicht, so dass Anwender gegenwärtig mit verschiedenen Systemen arbeiten müssen, um Untersuchungen eines Simulationsmodells in einem VR–Umfeld wie beispielsweise in einem CAVE zu ermöglichen. Zeitlicher Aufwand ist dadurch vorprogrammiert und das Auftreten von Fehlern bei der Konvertierung des Simulationsmodells möglich. Da auch der hauseigene Materialflusssimulator SIMFLEX/3D nicht für beide Anwendungsgebiete genutzt werden kann und für einen solchen Einsatz mit sehr hohem Aufwand angepasst werden müsste, wurde stattdessen ein neues Simulationssystem entworfen. Das Simulationssystem wird in der vorliegenden Arbeit als ein interoperables und offenes System beschrieben, das über eine flexible Softwarearchitektur verfügt und in einem vernetzten Umfeld mit anderen Werkzeugen Daten austauschen kann. Die grundlegende Idee besteht darin, eine flexible Softwarearchitektur zu entwerfen, die zunächst interaktive und ereignisorientierte 3D–Simulation erlaubt, aber zusätzlich für andere Anwendungszwecke offen gehalten wird. Durch den offenen Ansatz können Erweiterungen, die in Form von Plugins entwickelt werden, mit geringem Aufwand in das System integriert werden, wodurch eine hohe Flexibilität des Systems erreicht wird. Für interoperable Zwecke werden Softwaremodule vorgestellt, die optional eingesetzt werden können und standardisierte Formate wie bspw. XML benutzen. Mit dem neuen Simulationssystem wird die Lücke zwischen Desktop– und VR–Einsatz geschlossen und aus diesem Grund der Zeitaufwand und Fehlerquellen reduziert. Darüber hinaus ermöglicht der offene Ansatz, das Simulationssystem rollen- und aufgabenspezifisch anzupassen, indem die erforderlichen Plugins bereitgestellt werden. Aus diesem Grund kann das Simulationssystem mit sehr geringem Aufwand um weitere Untersuchungsschwerpunkte wie beispielsweise Avatare ergänzt werden. Erste Untersuchungen in einem CAVE wurden erfolgreich durchgeführt. Für die Digitale Fabrik kann der Prototyp eingesetzt werden, um die Produktionsplanung mit Hilfe der Simulation und die Entwicklung mit Hilfe der entwickelten Viewer zu unterstützen. Letzteres ist möglich, da die Viewer zahlreiche CAD–Formate lesen und um weitere Formate ergänzt werden können. Das entwickelte System ist für den Einsatz in verschiedenen Prozessen einer Wertschöpfungskette geeignet,um es als Untersuchungs-, Kommunikations- und Steuerungswerkzeug einzusetzen.

Case Study: Interacting with Volumetric Medical Datasets in Networked CAVE Environments

Virtual Reality (VR) is widely used in visualizing medical datasets. This interest has emerged due to the usefulness of its techniques and features. Such features include immersion, collaboration, and interactivity. In a medical visualization context, immersion is important, because it allows users to interact directly and closelywith detailed structures in medical datasets. Collaboration on the other hand is beneficial, because it gives medical practitioners the chance to share their expertise and offer feedback and advice in a more effective and intuitive approach. Interactivity is crucial in medical visualization and simulation systems, because responsiveand instantaneous actions are key attributes in applications, such as surgical simulations. In this paper we present a case study that investigates the use of VR in a collaborative networked CAVE environment from a medical volumetric visualization perspective. The study will present a networked CAVE application, which has been built to visualize and interact with volumetric datasets. We will summarize the advantages of such an application and the potential benefits of our system. We also will describe the aspects related to this application area and the relevant issues of such implementations.

Data forest: a collaborative version

As we increase our ability to produce and store ever larger amounts of data, it is becoming increasingly difficult to understand what the data is trying to tell us. Not all the data we are currently producing can easily fit into traditional visualization methods. This paper presents a new and novel visualization technique based on the concept of a Data Forest. Our Data Forest has been developed to be utilised by virtual reality (VR) systems. VR is a natural information medium. This approach can easily be adapted to be used in collaborative environments. A test application has been developed to demonstrate the concepts involved and a collaborative version tested.

Immersive open surgery simulation

Realistic medical simulation has great potential for augmenting or complimenting traditional medical training or surgery planning, and Virtual Reality (VR) is a key enabling technology for delivering this goal. Although, medical simulators are now widely used in medical institutions, the majority of them are still reliant on desktop monitor displays, and many are restricted in their modelling capability to minimally invasive or endoscopic surgery scenarios. Whilst useful, such models lack the realism and interaction of the operating theatre. In this paper, we describe how we are advancing the technology by simulating open surgery procedures in an Immersive Projection Display CAVE environment thereby enabling medical practitioners to interact with their virtual patients in a more realistic manner.

IT implementation in the construction organization

Organizational issues are inhibiting the implementation and strategic use of information technologies (IT) in the construction sector. This paper focuses on these issues and explores processes by which emerging technologies can be introduced into construction organizations. The paper is based on a case study, conducted in a major house building company that was implementing a virtual reality (VR) system for internal design review in the regional offices. Interviews were conducted with different members of the organization to explore the introduction process and the use of the system. The case study findings provide insight into the process of change, the constraints that inhibit IT implementation and the relationship between new technology and work patterns within construction organizations. They suggest that (1) user-developer communications are critical for the successful implementation of non-diffused innovations in the construction industry; and (2) successful uptake of IT requires both strategic decision-making by top management and decision-making by technical managers.

Low-cost HMD and EEG: using visual stimulation by the Oculus Rift® to detect stronger ERDs induced by motion imagery

Virtual Reality (VR) can provide visual stimuli for EEG studies that can be altered in real time and can produce effects that are difficult or impossible to reproduce in a non-virtual experimental platform. As part of this experiment the Oculus Rift, a commercial-grade, low-cost, Head Mounted Display (HMD) was assessed as a visual stimuli platform for experiments recording EEG. Following, the device was used to investigate the effect of congruent visual stimuli on Event Related Desynchronisation (ERD) due to motion imagery.