Pressures on the biota in the aquatic ecosystem of (Chi) Cross River National Park, Okwango Division

A preliminary survey of Cross River National Park (Nigeria), Okwangwo Division was carried out. The combined natural and human pressures being exerted on the aquatic resources were also investigated. Information on the existing fishing communities in and around the park area are given. The fishermen, their fishing methods and fishing grounds were identified. Limiting factors (natural and human) to the fisheries production, are analysed. Positive measures for conservation, protection and management of healthy and natural aquatic environment are suggested

Techniques for strength measurement at high pressures and strain-rates using transverse waves

The study of the strength of a material is relevant to a variety of applications including automobile collisions, armor penetration and inertial confinement fusion. Although dynamic behavior of materials at high pressures and strain-rates has been studied extensively using plate impact experiments, the results provide measurements in one direction only. Material behavior that is dependent on strength is unaccounted for. The research in this study proposes two novel configurations to mitigate this problem.

The first configuration introduced is the oblique wedge experiment, which is comprised of a driver material, an angled target of interest and a backing material used to measure in-situ velocities. Upon impact, a shock wave is generated in the driver material. As the shock encounters the angled target, it is reflected back into the driver and transmitted into the target. Due to the angle of obliquity of the incident wave, a transverse wave is generated that allows the target to be subjected to shear while being compressed by the initial longitudinal shock such that the material does not slip. Using numerical simulations, this study shows that a variety of oblique wedge configurations can be used to study the shear response of materials and this can be extended to strength measurement as well. Experiments were performed on an oblique wedge setup with a copper impactor, polymethylmethacrylate driver, aluminum 6061-t6 target, and a lithium fluoride window. Particle velocities were measured using laser interferometry and results agree well with the simulations.

The second novel configuration is the y-cut quartz sandwich design, which uses the anisotropic properties of y-cut quartz to generate a shear wave that is transmitted into a thin sample. By using an anvil material to back the thin sample, particle velocities measured at the rear surface of the backing plate can be implemented to calculate the shear stress in the material and subsequently the strength. Numerical simulations were conducted to show that this configuration has the ability to measure the strength for a variety of materials.

Strength of tantalum at high pressures through Richtmyer-Meshkov laser compression experiments and simulations

Strength at extreme pressures (>1 Mbar or 100 GPa) and high strain rates (106-108 s-1) of materials is not well characterized. The goal of the research outlined in this thesis is to study the strength of tantalum (Ta) at these conditions. The Omega Laser in the Laboratory for Laser Energetics in Rochester, New York is used to create such extreme conditions. Targets are designed with ripples or waves on the surface, and these samples are subjected to high pressures using Omega’s high energy laser beams. In these experiments, the observational parameter is the Richtmyer-Meshkov (RM) instability in the form of ripple growth on single-mode ripples. The experimental platform used for these experiments is the “ride-along” laser compression recovery experiments, which provide a way to recover the specimens having been subjected to high pressures. Six different experiments are performed on the Omega laser using single-mode tantalum targets at different laser energies. The energy indicates the amount of laser energy that impinges the target. For each target, values for growth factor are obtained by comparing the profile of ripples before and after the experiment. With increasing energy, the growth factor increased.

Engineering simulations are used to interpret and correlate the measurements of growth factor to a measure of strength. In order to validate the engineering constitutive model for tantalum, a series of simulations are performed using the code Eureka, based on the Optimal Transportation Meshfree (OTM) method. Two different configurations are studied in the simulations: RM instabilities in single and multimode ripples. Six different simulations are performed for the single ripple configuration of the RM instability experiment, with drives corresponding to laser energies used in the experiments. Each successive simulation is performed at higher drive energy, and it is observed that with increasing energy, the growth factor increases. Overall, there is favorable agreement between the data from the simulations and the experiments. The peak growth factors from the simulations and the experiments are within 10% agreement. For the multimode simulations, the goal is to assist in the design of the laser driven experiments using the Omega laser. A series of three-mode and four-mode patterns are simulated at various energies and the resulting growth of the RM instability is computed. Based on the results of the simulations, a configuration is selected for the multimode experiments. These simulations also serve as validation for the constitutive model and the material parameters for tantalum that are used in the simulations.

By designing samples with initial perturbations in the form of single-mode and multimode ripples and subjecting these samples to high pressures, the Richtmyer-Meshkov instability is investigated in both laser compression experiments and simulations. By correlating the growth of these ripples to measures of strength, a better understanding of the strength of tantalum at high pressures is achieved.

High pressure states in condensed matter: I. High pressure behavior of the iron-sulphur system with applications to the earth's core. II. Empirical equation of state for organic compounds at high pressures

Part I:

The earth's core is generally accepted to be composed primarily of iron, with an admixture of other elements. Because the outer core is observed not to transmit shear waves at seismic frequencies, it is known to be liquid or primarily liquid. A new equation of state is presented for liquid iron, in the form of parameters for the 4th order Birch-Murnaghan and Mie-Grüneisen equations of state. The parameters were constrained by a set of values for numerous properties compiled from the literature. A detailed theoretical model is used to constrain the P-T behavior of the heat capacity, based on recent advances in the understanding of the interatomic potentials for transition metals. At the reference pressure of 10⁵ Pa and temperature of 1811 K (the normal melting point of Fe), the parameters are: ρ = 7037 kg/m³, K_S0 = 110 GPa, K_S' = 4.53, K_S" = -.0337 GPa-1, and γ = 2.8, with γ α ρ^-1.17. Comparison of the properties predicted by this model with the earth model PREM indicates that the outer core is 8 to 10 % less dense than pure liquid Fe at the same conditions. The inner core is also found to be 3 to 5% less dense than pure liquid Fe, supporting the idea of a partially molten inner core. The density deficit of the outer core implies that the elements dissolved in the liquid Fe are predominantly of lower atomic weight than Fe. Of the candidate light elements favored by researchers, only sulfur readily dissolves into Fe at low pressure, which means that this element was almost certainly concentrated in the core at early times. New melting data are presented for FeS and FeS₂ which indicate that the FeS₂ is the S-hearing liquidus solid phase at inner core pressures. Consideration of the requirement that the inner core boundary be observable by seismological means and the freezing behavior of solutions leads to the possibility that the outer core may contain a significant fraction of solid material. It is found that convection in the outer core is not hindered if the solid particles are entrained in the fluid flow. This model for a core of Fe and S admits temperatures in the range 3450K to 4200K at the top of the core. An all liquid Fe-S outer core would require a temperature of about 4900 K at the top of the core.

Part II.

The abundance of uses for organic compounds in the modern world results in many applications in which these materials are subjected to high pressures. This leads to the desire to be able to describe the behavior of these materials under such conditions. Unfortunately, the number of compounds is much greater than the number of experimental data available for many of the important properties. In the past, one approach that has worked well is the calculation of appropriate properties by summing the contributions from the organic functional groups making up molecules of the compounds in question. A new set of group contributions for the molar volume, volume thermal expansivity, heat capacity, and the Rao function is presented for functional groups containing C, H, and O. This set is, in most cases, limited in application to low molecular liquids. A new technique for the calculation of the pressure derivative of the bulk modulus is also presented. Comparison with data indicates that the presented technique works very well for most low molecular hydrocarbon liquids and somewhat less well for oxygen-bearing compounds. A similar comparison of previous results for polymers indicates that the existing tabulations of group contributions for this class of materials is in need of revision. There is also evidence that the Rao function contributions for polymers and low molecular compounds are somewhat different.

Wave uplift pressures on horizontal platforms

The major objective of the study has been to investigate in detail the rapidly-varying peak uplift pressure and the slowly-varying positive and negative uplift pressures that are known to be exerted by waves against the underside of a horizontal pier or platform located above the still water level, but not higher than the crests of the incident waves.

In a "two-dimensional" laboratory study conducted in a 100-ft long by 15-in.-wide by 2-ft-deep wave tank with a horizontal smooth bottom, individually generated solitary waves struck a rigid, fixed, horizontal platform extending the width of the tank. Pressure transducers were mounted flush with the smooth soffit, or underside, of the platform. The location of the transducers could be varied.

The problem of a d equate dynamic and spatial response of the transducers was investigated in detail. It was found that unless the radius of the sensitive area of a pressure transducer is smaller than about one-third of the characteristic width of the pressure distribution, the peak pressure and the rise-time will not be recorded accurately. A procedure was devised to correct peak pressures and rise-times for this transducer defect.

The hydrodynamics of the flow beneath the platform are described qualitatively by a si1nple analysis, which relates peak pressure and positive slowly-varying pressure to the celerity of the wave front propagating beneath the platform, and relates negative slowly-varying pressure to the process by which fluid recedes from the platform after the wave has passed. As the wave front propagates beneath the platform, its celerity increases to a maximum, then decreases. The peak pressure similarly increases with distance from the seaward edge of the platform, then decreases.

Measured peak pressure head, always found to be less than five times the incident wave height above still water level, is an order of magnitude less than reported shock pressures due to waves breaking against vertical walls; the product of peak pressure and rise-time, considered as peak impulse, is of the order of 20% of reported shock impulse due to waves breaking against vertical walls. The maximum measured slowly-varying uplift pressure head is approximately equal to the incident wave height less the soffit clearance above still water level. The normalized magnitude and duration of negative pressure appears to depend principally on the ratio of soffit clearance to still water depth and on the ratio of platform length to still water depth.

Terapia periodontal não-cirúrgica reduz pressão arterial, massa ventricular esquerda, disfunção endotelial e níveis plasmáticos de proteína C-reativa, interleucina 6 e fibrinogênio

Evidências recentes sugerem que as doenças periodontais podem desempenhar um papel relevante na etiologia e patogênese de doenças cardiovasculares e hipertensão arterial. A resposta inflamatória, com conseqüente elevação de marcadores sistêmicos como proteína C-reativa, fibrinogênio e interleucina-6, e a disfunção endotelial, podem ser os responsáveis por essa associação. Alguns estudos têm relatado maiores níveis pressóricos, maior massa ventricular esquerda e disfunção endotelial em pacientes com doenças periodontais. Ao mesmo tempo, estudos clínicos vêm mostrando que a terapia periodontal pode levar à redução dos níveis plasmáticos dos marcadores de inflamação e redução do risco cardiovascular. O presente estudo teve como objetivo avaliar os efeitos da terapia periodontal não-cirúrgica em 26 pacientes (idade média de 53.68.0 anos) hipertensos refratários. Foram avaliados marcadores plasmáticos de inflamação (proteína C-reativa, fibrinogênio e interleucina-6), pressão arterial sistólica e diastólica, massa ventricular esquerda e rigidez arterial. A terapia periodontal foi eficaz na redução da média de todos os marcadores de risco cardiovascular avaliados. Os níveis de proteína C-reativa baixaram 0.7mg/dl 6 meses após a terapia periodontal, os de IL-6, 1.6pg/dl e os de fibrinogênio 55.3mg/dl (p<0.01). A pressão arterial sistólica apresentou redução média de 16.7mmHg e a diastólica de 9.6mmHg. A massa ventricular esquerda diminuiu em média 12.9g e a velocidade da onda de pulso, um marcador de rigidez arterial, e consequentemente de disfunção endotelial, apresentou redução de seus valores médios de 0.9m/s (p<0.01). Dessa forma, conclui-se que a terapia periodontal foi eficaz na redução dos níveis de proteína C-reativa, interleucina-6, fibrinogênio, pressão arterial, massa ventricular esquerda e rigidez arterial.

Análise da função diastólica em mulheres medicadas com antraciclínicos no tratamento do câncer de mama

O Câncer de mama é um dos problemas de saúde pública mais importantes em nosso país. São estimados, para 2010, 49.400 novos casos de câncer de mama no Brasil, com um risco estimado de 51 casos a cada 100 mil mulheres. A estratégia de tratamento das pacientes com tumores de mama pode passar pelo uso de quimioterapia. A doxorrubicina é uma das drogas mais ativas para o câncer de mama, pertencendo ao grupo das antraciclinas. A família das antraciclinas apresenta como efeito colateral dano ao miocárdio que pode chegar a 36% dependendo da dose utilizada. O efeito sobre o miocárdio costuma ocorrer mais comumente durante ou logo após o último ciclo de quimioterapia podendo, entretanto ocorrer após vários anos do último ciclo de quimioterapia. O objetivo deste estudo foi analisar as alterações da função diastólica ventricular esquerda em mulheres usuárias de antraciclínicos no tratamento do câncer de mama. Realizamos um estudo prospectivo, em uma coorte de mulheres entre 18 e 69 anos, com câncer de mama e indicação de quimioterapia com doxorrubicina. Acompanhamos por período não inferior a 18 meses um grupo de 38 pacientes que cumpriram os critérios de elegibilidade. A dose de doxorrubicina utilizada variou de 50 a 60 mg/m/SC. Todos os pacientes são do sexo feminino, e portadores do tipo histológico carcinoma ductal infiltrante. Duas pacientes faleceram durante o estudo, de causa não cardíaca. Em nossa avaliação, ao final do estudo observamos que os parâmetros: dimensões do átrio esquerdo, dimensões do ventrículo esquerdo na diástole, dimensões do ventrículo esquerdo na sístole, velocidade da onda E, relação da fase de enchimento rápido pela sístole atrial, velocidade diastólica tardia do anel mitral, velocidade diastólica precoce do anel mitral, tempo de desaceleração e a relação da velocidade de enchimento rápido precoce de VE pela velocidade diastólica precoce do anel mitral demonstraram serem parâmetros de grande utilidade para seguimento da lesão cardíaca por antraciclínicos. Já o que não ocorreu com: a fração de encurtamento, fração de ejeção, volume do AE, volume do AE corrigido pela superfície corporal, velocidade diastólica tardia, tempo de relaxamento isovolumétrico, velocidade sistólica do anel mitral, que não apresentaram alterações significativas neste estudo. A análise da função diastólica utilizando o ecocardiograma mostrou ser um método eficaz, que em conjunto com a da função sistólica possibilita detectar precocemente o possível dano miocárdico, oriundo ao uso da quimioterapia com antraciclínicos, favorecendo uma intervenção terapêutica precoce e adequada.