Load Adapted Solar Thermal Combisystems - Optical Analysis and Systems Optimization

In a northern European climate a typical solar combisystem for a single family house normally saves between 10 and 30 % of the auxiliary energy needed for space heating and domestic water heating. It is considered uneconomical to dimension systems for higher energy savings. Overheating problems may also occur. One way of avoiding these problems is to use a collector that is designed so that it has a low optical efficiency in summer, when the solar elevation is high and the load is small, and a high optical efficiency in early spring and late fall when the solar elevation is low and the load is large.The study investigates the possibilities to design the system and, in particular, the collector optics, in order to match the system performance with the yearly variations of the heating load and the solar irradiation. It seems possible to design practically viable load adapted collectors, and to use them for whole roofs ( 40 m2) without causing more overheating stress on the system than with a standard 10 m2 system. The load adapted collectors collect roughly as much energy per unit area as flat plate collectors, but they may be produced at a lower cost due to lower material costs. There is an additional potential for a cost reduction since it is possible to design the load adapted collector for low stagnation temperatures making it possible to use less expensive materials. One and the same collector design is suitable for a wide range of system sizes and roof inclinations. The report contains descriptions of optimized collector designs, properties of realistic collectors, and results of calculations of system output, stagnation performance and cost performance. Appropriate computer tools for optical analysis, optimization of collectors in systems and a very fast simulation model have been developed.

Tribology in Metal Working

This thesis focuses on the tribological performance of tool surfaces in two steel working operations, namely wire drawing and hot rolling. In all forming operations dimensions and surface finish of the products are of utmost importance. Forming basically includes three parts – forming conditions excluded – that may be changed; work material, tool and (possibly) lubricant. In the interface between work material and tool, the conditions are very aggressive with – generally or locally – high temperatures and pressures. The surfaces will be worn in various ways and this will change the conditions in the process. Consequently, the surface finish as well as the dimensions of the formed product may change and in the end, the product will not fulfil the requirements of the customer. Therefore, research and development in regard to wear, and consequently tribology, of the forming tools is of great interest. The investigations of wire drawing dies focus on coating adhesion/cohesion, surface characteristics and material transfer onto the coated steel both in laboratory scale as well as in the wire drawing process. Results show that it in wire drawing is possible to enhance the tribological performance of drawing dies by using a lubricant together with a steel substrate coated by a polished, dual-layer coating containing both hard and friction-lowering layers. The investigations of hot rolling work rolls focus on microstructure and hardness as well as cracking- and surface characteristics in both laboratory scale and in the hot strip mill. Results show that an ideal hot work roll material should be made up of a matrix with high hardness and a large amount of complex, hard carbides evenly distributed in the microstructure. The surface failure mechanisms of work rolls are very complex involving plastic deformation, abrasive wear, adhesive wear, mechanical and thermal induced cracking, material transfer and oxidation. This knowledge may be used to develop new tools with higher wear resistance giving better performance, lower costs and lower environmental impact.

Vindkraft i Dalarna : Från acceptans och lokalisering till planering och eftertanke

This thesis examines prerequisites for wind power diffusion in a county in Sweden that quite recently was concidered to be of interest for electricty production from renewable energy sources. Three different municipalities: Falun, Mora and Orsa in the county of Dalarna are highlighted.  Their view on permitting processes of wind power installations are investigated. Other actors, such as exploiters and local citizens are also being analysed. This study shows that the local acceptance was very high when the first wind power parks were built, much thanks to local politicians and local citizens. For the politicians the wind power symbolised a key to a better green society, for the local citizens the wind power meant some economical advantages. The first wind power parks were localised to areas because of good wind conditions and social factors, especially from local communities. However, results from this study shows that the acceptance for wind power the last few years, in generel, has decreased.  The local authorities have also been conscious of some negative consequenses from already built wind power parks.  As a response they started to add planning tools to the permitting process.

Vägar till en halverad energianvändning i Dalarnas småhusbebyggelse

Denna rapport är en svensk sammanfattning av licentiatavhandlingen med titeln "Simple Question, Complex Answer. Pathways towards a 50% Decrease in Building Energy Use", som publicerades vid Uppsala Universitet i februari 2014. I denna rapport har jag samman-ställt det som jag anser vara de viktigaste resultaten ur ett länsperspektiv och rapporten riktar sig därför i första hand mot aktörer inom byggnadssektorn i Dalarna. Mer omfattande bild-material, diagram, tabeller och hänvisningar till källmaterial återfinns för den intresserade i licentiatavhandlingen. Min förhoppning är att denna sammanfattning kan ligga till grund för diskussioner och beslut om framtiden för Dalarnas småhusbestånd.

Patient participation : what it is and what it is not

In general, patient participation is regarded as being informed and partaking in decision making regarding one’s care and treatment. This interpretation is common in legislation throughout the Western world and corresponding documents guiding health care professionals, as well as in scientific studies. Even though this understanding of the word participation can be traced to a growing emphasis on individuals’ autonomy in society and to certain dictionary defi nitions, there are other ways of understanding participation from a semantic point of view, and no trace of patients’ descriptions of what it is to participate can be found in these definitions. Hence, the aim of this dissertation was to understand patients’ experience of the phenomenon of patient participation. An additional aim was to understand patients’ experience of non-participation and to describe the conditions for patient participation and non-participation, in order to understand the prerequisites for patient participation. The dissertation comprises four papers. The philosophical ideas of Ricoeur provided a basis for the studies: how communication can present ways to understand and explain experiences of phenomena through phenomenological hermeneutics. The first and second studies involved a group of patients living with chronic heart failure. For the fi rst study, 10 patients were interviewed, with a narrative approach, about their experience of participation and non-participation, as defi ned by the participants. For the second study, 11 visits by three patients at a nurse-led outpatient clinic were observed, and consecutive interviews were performed with the patients and the nurses, investigating what they experience as patient participation and non-participation. A triangulation of data was performed to analyse the occurrence of the phenomena in the observed visits. For paper 3 and 4, a questionnaire was developed and distributed among a diverse group of people who had recent experience of being patients. The questionnaire comprised respondent’s description of what patient participation is, using items based on findings in Study 1, along with open-ended questions for additional aspects and general issues regarding situations in which the respondent had experienced patient participation and/or non-participation. The findings show additional aspects to patient participation: patient participation is being provided with information and knowledge in order for one to comprehend one’s body, disease, and treatment and to be able to take self-care actions based on the context and one’s values. Participation was also found to include providing the information and knowledge one has about the experience of illness and symptoms and of one’s situation. Participation occurs when being listened to and being recognised as an individual and a partner in the health care team. Non-participation, on the other hand, occurs when one is regarded as a symptom, a problem to be solved. To avoid non-participation, the information provided needs to be based on the individual’s need and with recognition of the patient’s knowledge and context. In conclusion, patient participation needs to be reconsidered in health care regulations and in clinical settings: patients’ defi nitions of participation, found to be close to the dictionaries’ description of sharing, should be recognised and opportunities provided for sharing knowledge and experience in two-way-communication.

Svensk sociologi : de många rösternas ämne

Sociologisk Forsknings digitala arkiv

Student and library services in cooperation

Abstract At Ångström Laboratory, one of the largest campuses at Uppsala University, the Library and the Student Services Office merged in November 2012. This merger is a pilot project to improve service for students and faculty. Ångström Laboratory has around 900 staff and almost 10,000 students, of whom most also spend time at other campuses. In this paper we describe the background and the implementation of the pilot project. One of the main reasons for moving together was the wish to gather together all kinds of student services, including the distribution of written examinations in one place. The central location and open environment of the Library made it a good choice. The heart of the Library and Student Services is an open office consisting of two service desks located in the library area. There are silent study areas; computers for searching and printing, an area for relaxing with newspapers and journals, meeting rooms and offices for the staff. The result is a lively place with a cosy atmosphere. As the Library and the Student Services still belong to different parts of the University we are now starting to find out how best to collaborate. To understand more we log all the questions we get and the services we deliver. We also have meetings together and use the same lunch room to get to know each other and our different functions. We will define which matters can be solved in common, and how we can back each other up when necessary.

MINNESORD : Att leva livet i livets sfärer Hans L. Zetterberg 1927–2014

Sociologisk Forsknings digitala arkiv