990 resultados para Tooth resorption
Resumo:
Matrix metalloproteinases (MMP) are considered to be key initiators of collagen degradation, thus contributing to bone resorption in inflammatory diseases. We determined whether subantimicrobial doses of doxycycline (DX) (<=10 mg kg-1 day-1), a known MMP inhibitor, could inhibit bone resorption in an experimental periodontitis model. Thirty male Wistar rats (180-200 g) were subjected to placement of a nylon thread ligature around the maxillary molars and sacrificed after 7 days. Alveolar bone loss (ABL) was measured macroscopically in one hemiarcade and the contralateral hemiarcade was processed for histopathologic analysis. Groups of six animals each were treated with DX (2.5, 5 or 10 mg kg-1 day-1, sc, 7 days) and compared to nontreated (NT) rats. NT rats displayed significant ABL, severe mononuclear cell influx and increase in osteoclast numbers, which were significantly reduced by 5 or 10 mg kg-1 day-1 DX. These data show that DX inhibits inflammatory bone resorption in a manner that is independent of its antimicrobial properties.
Resumo:
The Thr(118)Met substitution in the peripheral myelin protein 22 (PMP22) gene has been detected in a number of families with demyelinating Charcot-Marie-Tooth (CMT1) neuropathy or with the hereditary neuropathy with liability to pressure palsy, but in none of them has it consistently segregated with the peripheral neuropathy. We describe here a CMT1 family (a 63-year-old man, his brother and his niece) in which two mutations on different chromosomes were found in the PMP22 gene, the 17p duplication, detected by fluorescent semiquantitative polymerase chain reaction (PCR) of microsatellite markers localized within the duplicated region on chromosome 17p11.2-p12, and the Thr(118)Met substitution, detected by direct sequencing the four coding exons of the PMP22 gene. A genotype/phenotype correlation study showed that the neuropathy segregates with the duplication and that the amino acid substitution does not seem to modify the clinical characteristics or the severity of the peripheral neuropathy. We did not find any evidence to characterize this substitution as a polymorphism in the population studied and we propose that the high frequency reported for this point mutation in the literature suggests that the Thr(118)Met substitution may be a hotspot for mutations in the PMP22 gene.
Resumo:
Analytical calculation methods for all the major components of the synchronous inductance of tooth-coil permanentmagnet synchronous machines are reevaluated in this paper. The inductance estimation is different in the tooth-coil machine compared with the one in the traditional rotating field winding machine. The accuracy of the analytical torque calculation highly depends on the estimated synchronous inductance. Despite powerful finite element method (FEM) tools, an accurate and fast analytical method is required at an early design stage to find an initialmachine design structure with the desired performance. The results of the analytical inductance calculation are verified and assessed in terms of accuracy with the FEM simulation results and with the prototype measurement results.
Resumo:
Traction motor design significantly differs from industrial machine design. The starting point is the load cycle instead of the steady-state rated operation point. The speed of the motor varies from zero to very high speeds. At low speeds, heavy overloading is used for starting, and the field-weakening region also plays an important role. Finding a suitable fieldweakening point is one of the important design targets. At the lowest speeds, a high torque output is desired, and all current reserves of the supplying converter unit are used to achieve the torque. In this paper, a 110-kW 2.5-p.u. starting torque and a maximum 2.5-p.u. speed permanent-magnet traction motor will be studied. The field-weakening point is altered by varying the number of winding turns of machine. One design is selected for prototyping. Theoretical results are verified by measurements.
Resumo:
This paper introduces an important source of torque ripple in PMSMs with tooth-coil windings (TC-PMSMs). It is theoretically proven that saturation and cross-saturation phenomena caused by the non-synchronous harmonics of the stator current linkage cause a synchronous inductance variation with a particular periodicity. This, in turn, determines the magnitude of the torque ripple and can also deteriorate the performance of signal-injection-based rotor position estimation algorithms. An improved dq- inductance model is proposed. It can be used in torque ripple reduction control schemes and can enhance the self-sensing capabilities of TC-PMSMs
Resumo:
In this doctoral thesis, a tomographic STED microscopy technique for 3D super-resolution imaging was developed and utilized to observebone remodeling processes. To improve upon existing methods, wehave used a tomographic approach using a commercially available stimulated emission depletion (STED) microscope. A certain region of interest (ROI) was observed at two oblique angles: one at a standard inverted configuration from below (bottom view) and another from the side (side view) via a micro-mirror positioned close to the ROI. The two viewing angles were reconstructed into a final tomogram. The technique, named as tomographic STED microscopy, was able to achieve an axial resolution of approximately 70 nm on microtubule structures in a fixed biological specimen. High resolution imaging of osteoclasts (OCs) that are actively resorbing bone was achieved by creating an optically transparent coating on a microscope coverglass that imitates a fractured bone surface. 2D super-resolution STED microscopy on the bone layer showed approximately 60 nm of lateral resolution on a resorption associated organelle allowing these structures to be imaged with super-resolution microscopy for the first time. The developed tomographic STED microscopy technique was further applied to study resorption mechanisms of OCs cultured on the bone coating. The technique revealed actin cytoskeleton with specific structures, comet-tails, some of which were facing upwards and some others were facing downwards. This, in our opinion, indicated that during bone resorption, an involvement of the actin cytoskeleton in vesicular exocytosis and endocytosis is present. The application of tomographic STED microscopy in bone biology demonstrated that 3D super-resolution techniques can provide new insights into biological 3D nano-structures that are beyond the diffraction-limit when the optical constraints of super-resolution imaging are carefully taken into account.
Resumo:
Preclinical and clinical tooth important and significant aspect of preparation is an a dental student's education. The associated procedures rely heavily on the development of particular psychomotor skills. The most common format of instruction and evaluation in tooth preparation at many Dental Faculties, emphasizes the product (tooth preparation) and associates performance with characteristics of this product. This integrated study examines which skills should be developed and how a course of instruction can best be structured to develop the necessary skills. The skills which are identified are those necessary for tooth preparation are selected from a psychomotor taxonomy. The purpose of evaluating these skills is identified. Behavioral objectives are set for student performance and the advisability of establishing standards of performance is examined. After reviewing studies related to learning strategy for dental psychomotor the most suitable tasks as well as articles on instructor effectiveness a model is proposed. A pilot project at the University of Toronto, based on this proposed model is described. The paper concludes wi th a discussion of the implications of this proposed model.
Resumo:
Tesis (Doctorado en Ciencias con Especialidad en Biología Molecular e Ingeniería Genética) UANL
Resumo:
Thesis written in co-mentorship with director: Nelly Huynh; co-directors: Frank Rauch and Jean-Marc Retrouvey; collaborators: Clarice Nishio, Duy-Dat Vu and Nathalie Alos
Resumo:
Dental caries persists to be the most predominant oral disease in spite of remarkable progress made during the past half- century to reduce its prevalence. Early diagnosis of carious lesions is an important factor in the prevention and management of dental caries. Conventional procedures for caries detection involve visual-tactile and radiographic examination, which is considered as “gold standard”. These techniques are subjective and are unable to detect the lesions until they are well advanced and involve about one-third of the thickness of enamel. Therefore, all these factors necessitate the need for the development of new techniques for early diagnosis of carious lesions. Researchers have been trying to develop various instruments based on optical spectroscopic techniques for detection of dental caries during the last two decades. These optical spectroscopic techniques facilitate noninvasive and real-time tissue characterization with reduced radiation exposure to patient, thereby improving the management of dental caries. Nonetheless, a costeffective optical system with adequate sensitivity and specificity for clinical use is still not realized and development of such a system is a challenging task.Two key techniques based on the optical properties of dental hard tissues are discussed in this current thesis, namely laser-induced fluorescence (LIF) and diffuse reflectance (DR) spectroscopy for detection of tooth caries and demineralization. The work described in this thesis is mainly of applied nature, focusing on the analysis of data from in vitro tooth samples and extending these results to diagnose dental caries in a clinical environment. The work mainly aims to improve and contribute to the contemporary research on fluorescence and diffuse reflectance for discriminating different stages of carious lesions. Towards this, a portable and compact laser-induced fluorescence and reflectance spectroscopic system (LIFRS) was developed for point monitoring of fluorescence and diffuse reflectance spectra from tooth samples. The LIFRS system uses either a 337 nm nitrogen laser or a 404 nm diode laser for the excitation of tooth autofluorescence and a white light source (tungsten halogen lamp) for measuring diffuse reflectance.Extensive in vitro studies were carried out on extracted tooth samples to test the applicability of LIFRS system for detecting dental caries, before being tested in a clinical environment. Both LIF and DR studies were performed for diagnosis of dental caries, but special emphasis was given for early detection and also to discriminate between different stages of carious lesions. Further the potential of LIFRS system in detecting demineralization and remineralization were also assessed.In the clinical trial on 105 patients, fluorescence reference standard (FRS) criteria was developed based on LIF spectral ratios (F500/F635 and F500/F680) to discriminate different stages of caries and for early detection of dental caries. The FRS ratio scatter plots developed showed better sensitivity and specificity as compared to clinical and radiographic examination, and the results were validated with the blindtests. Moreover, the LIF spectra were analyzed by curve-fitting using Gaussian spectral functions and the derived curve-fitted parameters such as peak position, Gaussian curve area, amplitude and width were found to be useful for distinguishing different stages of caries. In DR studies, a novel method was established based on DR ratios (R500/R700, R600/R700 and R650/R700) to detect dental caries with improved accuracy. Further the diagnostic accuracy of LIFRS system was evaluated in terms of sensitivity, specificity and area under the ROC curve. On the basis of these results, the LIFRS system was found useful as a valuable adjunct to the clinicians for detecting carious lesions.
Resumo:
Während der Spermatogenese wird das Element Zink an die Sulfhydrylreste der Cysteine in den Mantelfaserproteinen der Spermienflagellen gebunden. So kann in den noch unreifen Mantelfasern die ungerichtete Ausbildung von Disulfidbrücken verhindert werden. Im Zuge der Spermatozoenreifung während der Nebenhodenpassage wird dieses Zink androgenabhängig zu einem hohen Prozentsatz wieder eliminiert. Die nun gerichtete Ausbildung von Disulfidbrücken ermöglicht die Versteifung der Mantelfasern. Diese Rigidität stellt die Voraussetzung zur progressiven Motilität dar, ohne die eine Fertilisierung der Eizelle im weiblichen Genitaltrakt nicht möglich ist. Da eine negative Korrelation zwischen dem Zinkgehalt von Flagellen und ihrer Motilität besteht (Henkel et al., 1999), hat die Zinkeliminierung während der Nebenhodenpassage eine entscheidende Bedeutung in der Entwicklung der Spermatozoen. Die vorliegende Arbeit untersucht die Mechanismen der epididymalen Zinkeliminierung sowie die an diesem Prozess beteiligten Komponenten und den Verbleib des eliminierten Zinks am System des Bullen, der Ratte und des Menschen. Mittels proteinchemischer Verfahren kann im bovinen System ein zinkbindendes 60 kDa-Protein als Albumin identifiziert werden. Ein 80 kDa-Protein mit zinkbindenden Eigenschaften bleibt unidentifiziert. Die Zinkbindungskapazität der fraktionierten Proteine ist dabei im Caput epididymidis am stärksten ausgeprägt. Atomabsorptionsspektralphotometrische Untersuchungen zeigen die höchsten flagellären Zinkwerte in den Spermien des Rete testis und eine Abnahme des Zinkgehalts zwischen Nebenhodenkopf und -körper. Durch Autometallographie kann eine epitheliale Zinkresorption im Nebenhodenschwanz nachgewiesen werden. Dort erfolgt auch die basale Anreicherung des Zinks. Am Zinkstoffwechsel scheint auch der Macrophage Migration Inhibitory Factor (MIF) beteiligt zu sein. Dieser ist ein Zytokin mit Oxidoreduktasecharakter und kommt unter anderem im Nebenhodenepithel sowie in den Vesikeln des Nebenhoden-Fluids der Ratte vor. MIF zeigt in den hier durchgeführten Untersuchungen sowohl in systemhomologer, als auch in rekombinanter Form in vitro eine Zink-eliminierende Wirkung auf Rattenspermatozoen des Caputs und der Cauda epididymidis und hat somit möglicherweise Einfluss auf den Reifungsprozess der Spermien im Nebenhoden. Lit.: Henkel R, Bittner J, Weber R, Hüther F, Miska W (1999). Relevance of zinc in human sperm flagella and its relation to motility. Fertil Steril 71: 1138-1143
Resumo:
Objectivos: Neste estudo retrospectivo pretendeu-se determinar o impacto da tomografia computorizada na sobrevivência pós-cirúrgica do cão com carcinoma espinocelular na cavidade oral, comparativamente à radiografia. Enfatizando desta forma, a sua importância no diagnóstico, no planeamento cirúrgico e prognóstico. O segundo objectivo consistiu em determinar as características tomográficas dos carcinomas espinocelulares da cavidade oral em cães. Material e Métodos: Foram analisados 7 canídeos com diagnóstico de carcinoma espinocelular. Os critérios de inclusão foram: cães com carcinoma espinocelular diagnosticado por biópsia, exame imagiológico complementar (radiografia simples ou tomografia computorizada), elegibilidade para cirurgia, execução de tratamento cirúrgico e acompanhamento pós-cirúrgico durante 2 anos. Foi registada a idade, o sexo, a raça, a localização anatómica, o estadiamento T e N, as características radiográficas e tomográficas dos tumores, o tempo de recorrência e por fim o tempo de sobrevivência global descrito nos registos consultados. Procedeu-se também ao registo das variáveis das imagens radiográficas e tomográficas obtidas: definição das margens neoplásicas, presença ou ausência de reacção perióstea e de destruição de osso cortical adjacente, presença de deslocação dentária e de reabsorção dentária e densidade óssea local. Resultados: Nenhum dos meios imagiológicos permitiu uma visualização bem definida das margens neoplásicas. A nível da destruição de osso cortical adjacente, foi visível em 66,67% dos casos avaliados com radiografia e em todos os casos que foram avaliados com tomografia computorizada (100%). Foi visível reacção perióstea em 33,33% dos canídeos avaliados por radiografia e em nenhum dos avaliados por tomografia (0%). A densidade óssea local estava diminuída em todos os casos avaliados por radiografia simples ou por tomografia. A nível de reabsorção dentária estava presente em 33,33% dos avaliados por radiografia e em 25% dos avaliados por tomografia. Foi possível visualizar deslocação dentária em 66,67% dos avaliados por radiografia e em todos os avaliados por tomografia (100%). A nível de percentagem de casos com recorrência local, nenhum caso avaliado com radiografia recorreu e apenas 1 caso avaliado por tomografia recorreu em 289 dias. O tempo médio de sobrevivência foi superior no grupo dos avaliados com radiografia (1091,7 dias) relativamente ao grupo avaliado por tomografia (404 dias). Ao fim de 2 anos, 66,67% dos casos avaliados por radiografia estavam vivos e somente 25% dos casos avaliados com tomografia sobreviveram. Discussão/conclusão: Não foi possível determinar o impacto real dos dois meios de diagnóstico no prognóstico pós-cirúrgico do carcinoma espinocelular oral no cão, devido à reduzida amostra e aos tumores com pior prognóstico (por localização e estadiamento) terem sido remetidos para tomografia.
Resumo:
This paper discusses a study examining a new model of cholesteatoma induced bone resorption in mice using autologous implantation of pinna dermis to the surface of the skull and the role of glutamate receptors in reducing the number of osteoclasts.
Resumo:
Serial sampling and stable isotope analysis performed along the growth axis of vertebrate tooth enamel records differences attributed to seasonal variation in diet, climate or animal movement. Because several months are required to obtain mature enamel in large mammals, modifications in the isotopic composition of environmental parameters are not instantaneously recorded, and stable isotope analysis of tooth enamel returns a time-averaged signal attenuated in its amplitude relative to the input signal. For convenience, stable isotope profiles are usually determined on the side of the tooth where enamel is thickest. Here we investigate the possibility of improving the time resolution by targeting the side of the tooth where enamel is thinnest. Observation of developing third molars (M3) in sheep shows that the tooth growth rate is not constant but decreases exponentially, while the angle between the first layer of enamel deposited and the enamel–dentine junction increases as a tooth approaches its maximal length. We also noted differences in thickness and geometry of enamel growth between the mesial side (i.e., the side facing the M2) and the buccal side (i.e., the side facing the cheek) of the M3. Carbon and oxygen isotope variations were measured along the M3 teeth from eight sheep raised under controlled conditions. Intra-tooth variability was systematically larger along the mesial side and the difference in amplitude between the two sides was proportional to the time of exposure to the input signal. Although attenuated, the mesial side records variations in the environmental signal more faithfully than the buccal side. This approach can be adapted to other mammals whose teeth show lateral variation in enamel thickness and could potentially be used as an internal check for diagenesis.