923 resultados para Teste de causalidade de Granger
Resumo:
A temperatura interna das câmaras e o teor de água das sementes podem influenciar os resultados obtidos no teste de envelhecimento acelerado (EA) e, consequentemente, sua interpretação. O trabalho foi desenvolvido com o objetivo de avaliar o efeito de diferentes teores iniciais de água de sementes de feijão nos resultados do teste de envelhecimento acelerado e as condições de temperatura e umidade relativa do ar no interior de duas câmaras de envelhecimento e das caixas plásticas (câmaras internas), durante a condução do teste. Utilizaram-se amostras de quatro lotes de sementes de feijão, cujo teor de água inicial foi ajustado para 8, 10 e 12%. As sementes foram submetidas ao envelhecimento em câmaras jaquetada de água e de germinação tipo BOD. Durante a realização do teste, foram monitorados, com um registrador de dados, os valores da temperatura e da umidade relativa do ar no interior das câmaras e das caixas plásticas, avaliados a cada 10 minutos, por sensores de cobre-constantan com bulbos seco e úmido, instalados no interior das mesmas. Verificou-se pequena variação de temperatura e umidade relativa do ar nas duas câmaras, sendo, porém, menor na jaquetada. em função da umidade relativa do ar na câmara jaquetada ter sido mais elevada, as sementes envelhecidas nessa câmara, apresentaram teor de água mais alto do que aquelas envelhecidas na BOD. Ambas as câmaras podem ser utilizadas para a realização do teste de envelhecimento acelerado de sementes de feijão.
Resumo:
Official rules for seed analysis don't establish criteria to execute germination tests for all species. This way, the aim of this research was to determinate the substrate, temperature and counting time for the germination test of physic nut seeds. For the germination test, four replications of 20 seeds were used, evaluating daily the normal seedlings until the end of germination. Initially, the substrates with sowing in vermiculite, were evaluated in rolled paper towels, in sand and in soil using alternating temperature of 20-30 degrees C. The most favorable substrates for germination were evaluated with another stage, using constant temperatures of 25, 30 and 35 degrees C and alternating ones, of 15-35 degrees C, 20-35 degrees C and 20-30 degrees C. One concluded that the germination test of physic nut seeds must be performed with the alternating temperature of 20-30 degrees C in sand or paper towel and with final counting 10 days after sowing.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
O teste de condutividade elétrica pode proporcionar informações importantes e complementares sobre o potencial fisiológico de sementes em período de tempo relativamente curto, visto que o teste de germinação se completa aos 28 dias para sementes de maracujá. Dessa forma, o objetivo deste trabalho foi avaliar a eficiência do teste de condutividade elétrica na avaliação do potencial fisiológico e padronizar a metodologia para sementes de maracujá-amarelo. Quatro lotes de sementes foram submetidos aos testes de germinação e vigor (primeira contagem, envelhecimento acelerado, índice de velocidade de germinação e emergência de plântulas em casa de vegetação), incluindo o teste de condutividade elétrica, conduzido com 25 e 50 sementes imersas em 50 e 75 mL de água desionizada,e as leituras realizadas após três, seis, nove, 12 e 24 h de embebição. Somente o lote 2 apresentou comportamento de baixo vigor apontado pelos testes de primeira contagem, emergência de plântulas e condutividade elétrica. A determinação do vigor de sementes de maracujá-amarelo por meio do teste de condutividade elétrica pode ser realizada utilizando 50 sementes e 75 mL após 24 h de embebição.
Resumo:
A utilização de sementes para formação de gramados esportivos e ornamentais tem assumido grande importância no Brasil, principalmente pelo baixo custo em relação à formação por placas de tapetes naturais. As bermudas [Cynodon dactylon (L.) Pers] são as principais gramas utilizadas na formação de campos esportivos e, dentre os problemas enfrentados, destaca-se a dificuldade de estabelecimento adequado da cultura, fato que exige a utilização de sementes de alto potencial fisiológico, de modo a permitir rápida emergência e desenvolvimento das plantas. Assim, estudaram-se procedimentos para a condução do teste de envelhecimento acelerado para determinar o potencial fisiológico de sementes dessa espécie, incluindo a avaliação da eficiência do uso de solução saturada de NaCl como alternativa para a realização do teste. Para tanto, cinco lotes de sementes foram submetidos aos testes de germinação, emergência de plântulas e envelhecimento acelerado (períodos de 48, 72 e 96 h, a 41 e 45 ºC, com e sem o uso de solução saturada de NaCl). O experimento foi conduzido em delineamento inteiramente casualizado. O envelhecimento acelerado com o uso de solução saturada de NaCl, dentre os procedimentos estudados, é o método mais adequado para avaliação do potencial fisiológico de sementes de grama-bermuda, sendo que a combinação 45 ºC/48 h é eficiente para a classificação dos lotes em diferentes níveis de vigor.
Resumo:
The aim was to study the efficiency of electrical conductivity test in evaluating the quality of castor seeds. Emergence of seedlings was evaluated in the field, with five seed lots of cv. AL Guarany 2002. The seeds were submitted to the following tests: germination; first count of germination; accelerated aging (45 degrees C by 24 to 100% UR), emergence of seedlings in the field, rate of speed of development of seedlings and electrical conductivity, testing the periods (2, 4, 6, 8 and 24 hours) and the number of seeds (25,50 and 75) in 75ml of distilled water conditioning to 25 degrees C. A completely randomized design was used. The averages were compared by the Tukey test at 5%. The mean laboratory and field test data were correlated. Electrical conductivity test for 4 hours with 25 seeds and 6 hours with 50 seeds, and the rate of speed emergency proved efficient in the selection of lots vigor by providing information equivalent to the emergence of seedlings in the field.
Resumo:
Vermiculite is a substrate used in seedling production of forest species and can be an option for the germination test of ipe seeds. The objective of this research was to evaluate the use of vermiculite in the germination test of Tabebuia chrysotricha seeds and to stablish appropriate particle size and moisture for this substrate. Four replications of 20 seeds were sown in soil, sand, paper rolls, and vermiculite with different particle sizes: micron (0.15-0.20 mm), superthin (0.21-0.30 mm), thin (0.30-0.50 mm) and medium (0.50-1.19 mm) moistened with water equivalent to 0.5, 1.0, 1.5 and 2.0 times the weight of the dry subtrate. Germination test was carried out at 30 degrees C. The percentage of normal seedlings was obtained seven days after sowing (first count) and then weekly until 28 days, when abnormal seedlings and dead seeds were also counted. It was concluded that the germination test of ipe seeds can be carried out with thin or medium vermiculite moistened with water equivalent to 1.5 times the dry weight of the substrate. These treatments resulted in higher and faster germination (21 days).
Resumo:
This work intends to analyze the behavior of the gas flow of plunger lift wells producing to well testing separators in offshore production platforms to aim a technical procedure to estimate the gas flow during the slug production period. The motivation for this work appeared from the expectation of some wells equipped with plunger lift method by PETROBRAS in Ubarana sea field located at Rio Grande do Norte State coast where the produced fluids measurement is made in well testing separators at the platform. The oil artificial lift method called plunger lift is used when the available energy of the reservoir is not high enough to overcome all the necessary load losses to lift the oil from the bottom of the well to the surface continuously. This method consists, basically, in one free piston acting as a mechanical interface between the formation gas and the produced liquids, greatly increasing the well s lifting efficiency. A pneumatic control valve is mounted at the flow line to control the cycles. When this valve opens, the plunger starts to move from the bottom to the surface of the well lifting all the oil and gas that are above it until to reach the well test separator where the fluids are measured. The well test separator is used to measure all the volumes produced by the well during a certain period of time called production test. In most cases, the separators are designed to measure stabilized flow, in other words, reasonably constant flow by the use of level and pressure electronic controllers (PLC) and by assumption of a steady pressure inside the separator. With plunger lift wells the liquid and gas flow at the surface are cyclical and unstable what causes the appearance of slugs inside the separator, mainly in the gas phase, because introduce significant errors in the measurement system (e.g.: overrange error). The flow gas analysis proposed in this work is based on two mathematical models used together: i) a plunger lift well model proposed by Baruzzi [1] with later modifications made by Bolonhini [2] to built a plunger lift simulator; ii) a two-phase separator model (gas + liquid) based from a three-phase separator model (gas + oil + water) proposed by Nunes [3]. Based on the models above and with field data collected from the well test separator of PUB-02 platform (Ubarana sea field) it was possible to demonstrate that the output gas flow of the separator can be estimate, with a reasonable precision, from the control signal of the Pressure Control Valve (PCV). Several models of the System Identification Toolbox from MATLAB® were analyzed to evaluate which one better fit to the data collected from the field. For validation of the models, it was used the AIC criterion, as well as a variant of the cross validation criterion. The ARX model performance was the best one to fit to the data and, this way, we decided to evaluate a recursive algorithm (RARX) also with real time data. The results were quite promising that indicating the viability to estimate the output gas flow rate from a plunger lift well producing to a well test separator, with the built-in information of the control signal to the PCV
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Pesquisas visando a redução de perdas de grãos e sementes durante o armazenamento têm ocupado destaque em vários países. Dentro deste contexto, a avaliação da eficácia de um índice de qualidade de boa aplicabilidade, com metodologia simples e de resposta imediata visando tomadas rápidas de decisão é de suma importância. O presente trabalho, conduzido no Laboratório de Processamento de Produtos Agrícolas UNESP, Botucatu/SP teve como objetivos: (a) estabelecer correspondência entre o nível de ácidos graxos livres e as classes de vigor em sementes; (b) estabelecer correspondência entre o nível de ácidos graxos livres e a classificação comercial por tipos, em grãos de arroz (Oryza sativa L.). A correspondência entre o nível de ácidos livres e as classes de vigor em sementes foi avaliada utilizando-se sementes envelhecidas artificialmente, obtendo-se assim níveis diferenciados de vigor. A correspondência entre o nível de ácidos graxos livres e a classificação por tipos, em grãos de arroz, foi realizada utilizando-se amostras de arroz com as porcentagens máximas de grãos defeituosos permitidos pela legislação vigente. Utilizou-se a análise de variância de um delineamento inteiramente ao acaso e, para comparação entre médias, aplicou-se o teste de Tukey ao nível de 5% de probabilidade. Por meio dos resultados obtidos, observou-se que o teste de acidez graxa mostrou-se exeqüível para avaliar o vigor de sementes de arroz. Na pesquisa que buscava uma correspondência entre os valores de acidez graxa e classificação comercial, os dados revelaram a tendência do nível de ácidos graxos livres acompanhar a classificação comercial por tipos.
Resumo:
This work had the aim of evaluating the effect of different temperatures and pre-drying periods on yard on the chemical composition and quality of the beverage of peeled cherry coffee. Temperatures of 40 degrees C, 50 degrees C and 60 degrees C were used in the mass with air flow of 20m(3)m(-1)m(2). After drying, the visible defects of the coffee samples were removed. For evaluation of quality, the following analyses were performed: sensorial analyses, total sugars, reducing sugars and non-reducing sugars, electrical conductivity, potassium leaching and fatty acidity. One verified that lower drying temperature and greater pre-drying period had contributed for the attainment of a better quality drink. The increase of temperature and pre-drying periods decreased the non-reducing sugars content while the values of reducing sugars increased. The electrical conductivity, potassium leaching and fatty acidity increased significantly with the rise of temperature and potassium leaching reduced with increasing of the pre-drying period. The fatty acidity test showed to be sensible to the drying temperature.
Resumo:
Preconditioning of castor bean seeds for the tetrazolium test. This research had the objective of standardizing the methodology for preconditioning of castor bean (Ricinus communis L.) seeds for the evaluation of their physiological potential by the tetrazolium test. The evaluated seed preconditioning methods were: seeds with coat between moist paper towel at 30, 35 and 40 degrees C for 6, 8, 10, 12, 14, 16 and 18 hours; and seeds without coat between moist paper towel; and seeds with coat immersed in water, at 25, 30, 35 and 40 degrees C for 1, 2, 3, 4, 5 and 6 hours. After preconditioning, the seed coat was removed, the seeds were cut lengthwise, and immersed in tetrazolium solution at a concentration of 0.2% for 120 minutes at 35 degrees C. The seeds' germination percentage, moisture content before and after preconditioning, and staining uniformity after the tetrazolium were evaluated. The statistical design was completely randomized, and the means comparisons were accomplished by the Tukey test at 0.05 level of probability. It was concluded that castor bean seeds should be preconditioned with coat between moist paper towel at 35 degrees C for 12 hours, so that the results of the tetrazolium test will be similar to those obtained in the germination test.
Resumo:
The evaluation of the effect of seed has been fundamental tool in the program of quality control, and the accelerated aging test, an important part of that process. Some authors report that the germination and vigor are associated with seed size and facing the lack of consensus for the use of this test methodology and the relationship of seed size on the physiological quality, this work aimed to adapt the existing methodology as the temperature and period of conditioning on the performance of two sizes of seed cotton. The seeds were classified into two meshes of sieves, and then subjected to tests of water content, germination and electrical conductivity. The experimental design was completely randomized, analyzed statistically in a factorial threefold. Seeds of different sizes, showed no difference in percentage of germination. Seeds subjected to 40 degrees C for 42h of conditioning showed better percentage of germination.
Resumo:
The technique of ion nitriding, despite being fully consolidated in the industry, has great limitations when applied to the treatment of small parts. This is because effects that occur due to non-uniformity of the electric field, generate localized heating in parts, damaging the uniformity of nitrided layer. In addition, because the samples are treated static parts thereof are untreated. To expand the use of plasma nitriding, this work presents the development, assembly and testing of a prototype plasma reactor with rotatory cathodic cage [patent pending], able to meet these needs, giving the material a uniform treatment and opening doors to industrial scale production. The samples tested with hexagonal nuts are 6.0 mm in diameter, made of stainless steel AISI 304 nitrided at a pressure of 1 mbar in an atmosphere of 20% H2 + 80% N2 for 1 h. After treatment, testing visual inspection, optical microscopy and microhardness were carried out to check the effectiveness of the process for uniformity and hardness of the parts. All samples exhibited uniform color, and matte brownish, unlike the untreated samples, silver color and gloss. The hardness of the surface (top and sides) was 65% and even higher than the original hardness. The nitrided layer showed great uniformity in microstructure and thickness. It is concluded, therefore, that the unit was effective constructed for the purposes for which it was designed