Technological Changes and its Impact on Rubber Plantation Industry in Kerala An Econometric Study

The present study describes in detail the major technological advances in the rubber-growing industry in the lastfour decades. The major technological changes experienced in the rubber plantation industry during the period are the introduction of 'high yielding-planting materials, scientific application of fertilisers, use of pesticides, tapping during rainy season using‘rain guards, use of. yield stimulants and improved tapping methods School of Management Studies, Cochin University of Science and Technology

Technological Change and the Development of the Primary Fishing Industry of Kerala - A Study of Limited Growth

Induction of growth in the primary marine fishing industry of Kerala is a sine gua Qgn for improving the economy of the fishermen, the state's domestic product as well as earning more foreign exchange for the country. The State Administration has been trying to instil growth into the industry eversince the output of the industry showed marked sign of decline (particularly after 1975). Significantly, it has attempted to strengthen the traditional sector, (which is considered to be the crucial sector of the primary marine fishing industry of the state) by introducing intermediate technology and by revamping the organisational structure of the industry. But it appears that the production system in the primary marine fishing industry of Kerala has been severely constrained by the existing technology, organisation of production and marketing institutions. Regeneration of growth in the industry calls forth an understanding of the 'process' of growth in the industry and the need to réorganise it with new technology, and new organisations. The present study is an attempt to unraval the process of growth in the primary marine fishing industry of Kerala since 1951

Low-Cost Micromechanically Tunable Optical Devices: Strained Resonator Engineering, Technological Implementation and Characterization

The rapid growth of the optical communication branches and the enormous demand for more bandwidth require novel networks such as dense wavelength division multiplexing (DWDM). These networks enable higher bitrate transmission using the existing optical fibers. Micromechanically tunable optical microcavity devices like VCSELs, Fabry-Pérot filters and photodetectors are core components of these novel DWDM systems. Several air-gap based tunable devices were successfully implemented in the last years. Even though these concepts are very promising, two main disadvantages are still remaining. On the one hand, the high fabrication and integration cost and on the other hand the undesired adverse buckling of the suspended membranes. This thesis addresses these two problems and consists of two main parts: • PECVD dielectric material investigation and stress control resulting in membranes shape engineering. • Implementation and characterization of novel tunable optical devices with tailored shapes of the suspended membranes. For this purposes, low-cost PECVD technology is investigated and developed in detail. The macro- and microstress of silicon nitride and silicon dioxide are controlled over a wide range. Furthermore, the effect of stress on the optical and mechanical properties of the suspended membranes and on the microcavities is evaluated. Various membrane shapes (concave, convex and planar) with several radii of curvature are fabricated. Using this resonator shape engineering, microcavity devices such as non tunable and tunable Fabry-Pérot filters, VCSELs and PIN photodetectors are succesfully implemented. The fabricated Fabry-Pérot filters cover a spectral range of over 200nm and show resonance linewidths down to 1.5nm. By varying the stress distribution across the vertical direction within a DBR, the shape and the radius of curvature of the top membrane are explicitely tailored. By adjusting the incoming light beam waist to the curvature, the fundamental resonant mode is supported and the higher order ones are suppressed. For instance, a tunable VCSEL with 26 nm tuning range, 400µW maximal output power, 47nm free spectral range and over 57dB side mode suppresion ratio (SMSR) is demonstrated. Other technologies, such as introducing light emitting organic materials in microcavities are also investigated.

Optimization in the Technological Steps for the Fabrication of Large Area Micromirror Arrays

Micromirror arrays are a very strong candidate for future energy saving applications. Within this work, the fabrication process for these micromirror arrays has been optimized and some steps for the large area fabrication of micromirror modules were performed. At first the surface roughness of the insulation layer of silicon dioxide (SiO2) was investigated. This SiO2 thin layer was deposited on three different type of substrates i.e. silicon, glass and Polyethylene Naphthalate (PEN) substrates. The deposition techniques which has been used are Plasma Enhanced Chemical Vapor Deposition (PECVD), Physical Vapor Deposition (PVD) and Ion Beam Sputter Deposition (IBSD). The thickness of the SiO2 thin layer was kept constant at 150nm for each deposition process. The surface roughness was measured by Stylus Profilometry and Atomic Force Microscopy (AFM). It was found that the layer which was deposited by IBSD has got the minimum surface roughness value and the layer which was deposited by PECVD process has the highest surface roughness value. During the same investigation, the substrate temperature of PECVD was varied from 80° C to 300° C with the step size of 40° C and it was found that the surface roughness keeps on increasing as the substrate holder temperature increases in the PECVD process. A new insulation layer system was proposed to minimize the dielectric breakdown effect in insulation layer for micromirror arrays. The conventional bilayer system was replaced by five layer system but the total thickness of insulation layer remains the same. It was found that during the actuation of micromirror arrays structure, the dielectric breakdown effect was reduced considerably as compared to the bilayer system. In the second step the fabrication process of the micromirror arrays was successfully adapted and transferred from glass substrates to the flexible PEN substrates by optimizing the conventional process recipe. In the last section, a large module of micromirror arrays was fabricated by electrically interconnecting four 10cm×10cm micromirror modules on a glass pane having dimensions of 21cm×21cm.

Technological convergence: a strategic perspective

The information and communication technologies (ICT) sectors are in a process of technological convergence. Determinant factors in this process are the liberalisation of the telecommunications markets and technological change. Many firms are engaged in a process of mergers and alliances to position themselves in this new framework. Technological and demand uncertainties are very important. Our objective in this paper is to study the economic determinants of the strategies of the firms. With this aim, we review some key technological and demand aspects. We shed some light on the strategic motivations of the firms by establishing a parallel with the evolution of the retailing sector

Biased Technological Change, Impatience and Welfare

En este artículo utilizamos un modelo de generaciones traslapadas con heterogeneidad en la tasa de impaciencia para mostrar que los efectos de un cambio tecnológico aumentador de capital no son simétricos en los agentes y pueden conllevar una reducci on en el consumo. La asimetría en la tasa de impaciencia de los agentes en un período, tiene consecuencias sobre los beneficios del cambio tecnológico para las generaciones futuras. Menores tasas de impaciencia llevan a mayores niveles de capital y de consumo, si se entiende que la economía tiene el suficiente nivel de capital per capita.

Labor supply, biased technological change and economic growth

Se utiliza un modelo de innovaciones sesgadas para estudiar los efectos de cambios exógenos en la oferta laboral. En un contexto de innovaciones sesgadas, a medida que las economías acumulan capital, el trabajo se hace relativamente más escaso y más caro, por este motivo, hay incentivos para adoptar tecnologías ahorradoras de trabajo. Del mismo modo un cambio en la oferta laboral afecta la abundancia de factores y sus precios relativos. En general, una reducción de la oferta laboral, hace que el trabajo sea más caro y genera incentivos para cambio tecnológico ahorrador de trabajo. Así, el efecto inicial que tiene el cambio en la oferta laboral sobre los precios de los factores es mitigado por el cambio tecnológico. Finalmente, los movimientos en la remuneración a los factores afectan las decisiones de ahorro y, por lo tanto, la dinámica del crecimiento. En este trabajo se exploran las consecuencias de una reducción de la oferta laboral en dos contextos teóricos diferentes: un modelo de agentes homogéneos y horizonte infinito y un modelo de generaciones traslapadas.

Biased technological change, human capital and factor shares

We propose a one-good model where technological change is factor saving and costly. We consider a production function with two reproducible factors: physical capital and human capital, and one not reproducible factor. The main predictions of the model are the following: (a) The elasticity of output with respect to the reproducible factors depends on the factor abundance of the economies. (b) The income share of reproducible factors increases with the stage of development. (c) Depending on the initial conditions, in some economies the production function converges to AK, while in other economies long-run growth is zero. (d) The share of human factors (raw labor and human capital) converges to a positive number lower than one. Along the transition it may decrease, increase or remain constant.

Collaborative business networks evaluation of technological tools for decision support making

Nowadays, companies are living great difficulties on managing their business due to constant and unpredictable economic market fluctuations. Recent changes in market trends (such as the constant demand for new products and services, mass customization and the drastic reduction of delivery time) lead companies to adopt strategies of creating partnerships with other companies as a way to respond effectively to such difficult economical times. Collaborative Networks’ concept born by the consequence of companies could no longer consider their internal business processes’ management as sufficient and tend to seek for a collaborative approach with other partners for their critical processes. Information technologies (ICT) assumed a major role acting as “enablers” of these kinds of networks, enhancing information sharing and business process integration. Several new trends concerning ICT architectures have been created to support collaborative networks requirements, but still doesn’t exist a common platform to reduce the needed integration effort on virtual organizations. This study aims to investigate the current technological solutions available in the market which enhances the management of companies’ business processes (specially, Collaborative Planning). Finally, the research work ends with the presentation of a conceptual model to answer to the constraints evaluated.

The Central Institute for the Deaf Computer Lab: a guide to technological integration

This paper presents a guide for teachers about the computer lab at Central Institute for the Deaf.

Technological Solutions Potentially Influencing the Future of Long-Term Care. ENEPRI Research Report No. 114, April 2012

This report provides a forecast of the potential direct and indirect influences of various kinds of technologies on the LTC milieu, answering the following question: from a technology-driven perspective: “Consider each technological solution. What could be its future usage in the LTC sector?” Future technological deployments will induce changes in the respective roles of the care recipient and of the formal and informal carers, with an impact on three major concerns: the transformation of the care recipient into a proactive subject, the augmented potentiality for home care and the new functions that informal carers could assume.