Physical properties of edible films based on cassava starch as affected by the plasticizer concentration

The aim of this work was to investigate the effect of glycerol contents on physical properties of cassava starch films. The films were prepared from film-forming solutions (FFS) with 2g cassava starch/100g water and 0, 15, 30 and 45g glycerol/100g starch, and were analysed to determine its mechanical properties by tensile tests, the glass-transition temperature (T-g) by differential scanning calorimetry (DSC) and the crystallinity by X-ray diffraction (XRD). The infrared spectra of the films were also recorded. The resistance values of the films decreased, while those of the elasticity increased with an increase in glycerol concentration due to the plasticizer effect of glycerol, which was also observed in DSC curves. The T-g of the films prepared decreased with the glycerol content. However, for samples with 30 and 45g glycerol/100g starch, two T-g curves were observed, probably due to a phase separation phenomenon. According to the XRD diffractograms, the films with 0 and 15gglycerol/100g starch presented an amorphous character, but some tendency to show crystalline peaks were observed for films with 30 and 45g glycerol/100g starch. The results obtained with Fourier transform infrared (FTIR) corroborated these observations. Copyright (C) 2007 John Wiley & Sons, Ltd.

Reduction of oil uptake in deep fat fried chicken nuggets using edible coatings based on cassava starch and methylcellulose

The aim of this study was to evaluate the effect of edible coatings based on methylcellulose (MC) and cassava starch (CS) to reduce oil uptake and improve water retention of chicken nuggets during deep fat frying. Edible coatings were prepared with I g of MC/100 g solution and 4 g of CS/100 g solution, with 25 or 55 g glycerol/100 g biopolymer. These solutions were applied to nugget samples before battering. Pre-fried and fried nuggets were analyzed to determine lipid and water contents. Color and texture were also measured in the fried nuggets. In general, there was no effect of the two concentrations of plasticizer of either of the biopolymers on the water retention of whole nuggets. But, higher oil uptake reduction, and consequently, lower lipid content was observed on nuggets coated with CS and 25% plasticizer. The coated samples were darker and had a brighter yellow color when compared with the control. There was also a significant decrease in the shearing force of the fried coated samples, indicating reduced hardness of these samples.

Extraction of cellulose whiskers from cassava bagasse and their applications as reinforcing agent in natural rubber

In this work cassava bagasse, a by-product of cassava starch industrialization was investigated as a new raw material to extract cellulose whiskers. This by-product is basically constituted of cellulose fibers (17.5 wt%) and residual starch (82 wt%). Therefore, this residue contains both natural fibers and a considerable quantity of starch and this composition suggests the possibility of using cassava bagasse to prepare both starch nanocrystals and cellulose whiskers. In this way, the preparation of cellulose whiskers was investigated employing conditions of sulfuric acid hydrolysis treatment found in the literature. The ensuing materials were characterized by transmission electron microscopy (TEM) and X-ray diffraction experiments. The results showed that high aspect ratio cellulose whiskers were successfully obtained. The reinforcing capability of cellulose whiskers extracted from cassava bagasse was investigated using natural rubber as matrix. High mechanical properties were observed from dynamic mechanical analysis. (C) 2010 Elsevier B.V. All rights reserved.

Cassava bagasse cellulose nanofibrils reinforced thermoplastic cassava starch

Cellulose cassava bagasse nanofibrils (CBN) were directly extracted from a by-product of the cassava starch (CS) industry, viz. the cassava bagasse (CB), The morphological structure of the ensuing nanoparticles was investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), presence of other components such as sugars by high performance liquid chromatography (HPLC), thermogravimetric analysis (TGA), and X-ray diffraction (XRD) experiments. The resulting nanofibrils display a relatively low crystallinity and were found to be around 2-11 nm thick and 360-1700 nm long. These nanofibrils were used as reinforcing nanoparticles in a thermoplastic cassava starch matrix plasticized using either glycerol or a mixture of glycerol/sorbitol (1:1) as plasticizer. Nanocomposite films were prepared by a melting process. The reinforcing effect of the filler evaluated by dynamical mechanical tests (DMA) and tensile tests was found to depend on the nature of the plasticizer employed. Thus, for the glycerol-plasticized matrix-based composites, it was limited especially due to additional plasticization by sugars originating from starch hydrolysis during the acid extraction. This effect was evidenced by the reduction of glass vitreous temperature of starch after the incorporation of nanofibrils in TPSG and by the increase of elongation at break in tensile test. On the other hand, for glycerol/sorbitol plasticized nanocomposites the transcrystallization of amylopectin in nanofibrils surface hindered good performances of CBN as reinforcing agent for thermoplastic cassava starch. The incorporation of cassava bagasse cellulose nanofibrils in the thermoplastic starch matrices has resulted in a decrease of its hydrophilic character especially for glycerol plasticized sample. (C) 2009 Elsevier Ltd. All rights reserved.

Cassava wastewater as a substrate for the simultaneous production of rhamnolipids and polyhydroxyalkanoates by Pseudomonas aeruginosa

Glycerol, cassava wastewater (CW), waste cooking oil and CW with waste frying oils were evaluated as alternative low-cost carbon substrates for the production of rhamnolipids and polyhydroxyalkanoates (PHAs) by various Pseudomonas aeruginosa strains. The polymers and surfactants produced were characterized by gas chromatography-mass spectrophotometry (MS) and by high-performance liquid chromatography-MS, and their composition was found to vary with the carbon source and the strain used in the fermentation. The best overall production of rhamnolipids and PHAs was obtained with CW with frying oil as the carbon source, with PHA production corresponding to 39% of the cell dry weight and rhamnolipid production being 660 mg l(-1). Under these conditions, the surface tension of the culture decreased to 30 mN m(-1), and the critical micelle concentration was 26.5 mg l(-1). It would appear that CW with frying oil has the highest potential as an alternative substrate, and its use may contribute to a reduction in the overall environmental impact generated by discarding such residues.

Euphemism: Sweet Talking or Deception?

The aim of this paper is to shed light on euphemism in two different senses: sweet talking and deception. I shall treat euphemism from two different perspectives: the usual use of euphemism, sweet talking, in which it is used to maintain one's face and the orthophemistic sense, deception, where 'torture' is referred to as "enhanced interrogation techniques". I shall analyze examples, taken from religious, cultural, political backgrounds, on each case. Moreover, I shall talk about taboo since it is usually associated with euphemism. I shall talk about the referential (semantic) and expletive (pragmatic) aspects of swearing expressions. In this essay, I shall show that euphemism can be used in two different senses: sweet talking and deception.

Changes in physical properties of extruded sour cassava starch and quinoa flour blend snacks

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of citrus sudden death on yield and quality of sweet orange cultivars in Brazil

Citrus sudden death (CSD) has greatly affected sweet orange cultivars grafted on Rangpur lime in São Paulo and Minas Gerais States, Brazil. To characterize and quantify CSD damage, fruit yield and quality were assessed in each combination of sweet orange cultivar (Hamlin, Pera, Natal, and Valencia), age class (3 to 5, 6 to 10, and 11 to 15 years old), and CSD severity class (0 = no symptom, 1 = initial symptoms, and 2 = severe symptoms). For each combination, 10 trees were harvested and 20 fruit were taken for quality analysis. Damage was characterized by reduc_ tion of: (i) total weight of fruit/tree (36 and 67% for severity class 1 and 2, respectively), (ii) number of fruit/tree (27 and 55%), (iii) fruit size (13 and 25% in diameter and height [stem to styler distance]), (iv) fruit weight (32 and 56%), (v) total soluble solids (TSS)/fruit (18 and 42%), and increase of (vi) Brix (14 and 34%), (vii) acidity (16 and 41%), and (viii) TSS/90-1b. box (21 and 33%). There was no alteration on Brix/acidity ratio and percentage of juice on fruit of affected trees. Sweet orange cultivars did not differ in percentage of reduction or increase of all yield and quality variables, with the exception of Pera, which expressed increases of Brix and acidity. For more severe affected trees, the youngest plants showed a higher reduction in fruit number/tree, whereas plants 6 to 10 years old showed a higher increase in fruit acidity and TSS/box. However, no differences in percentage of reduction or increase for other variables were observed among different age classes. The damage to the above probably was associated with reduced water absorption capacity of CSD-affected trees.

Accumulation of nutrients in sweet peppers cultivated in coconut fiber

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Digestive and functional properties of a partially hydrolyzed cassava solid waste with high insoluble fiber concentration

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Crescimento e esporulação de duas espécies de arthrobotrys corda em diferentes meios de cultura e dois ambientes

The researches on the biological control of nematodes with nematophagous fungi has been intensified in recent years. The knowledge of the ecological conditions for the growth and sporulation of these fungi is a prerequisite for attainment of pure cultures needed to attend the demand for formulation of these organisms. With the objective to evaluate the micelial growth and sporulation of Arthrobotrys musiformis and A. oligospora in two environments (B.O.D at 25 +/- 1 degrees C and the environment of the Laboratory), 20 cultures media prepared with common materials found in the communities and industrialized media such as mycological agar, PDA and CMA were evaluated. The media were tested in Petri dishes, being the micelial growth of the fungi evaluated daily, during six days. The measured sporulation at the end of the experiment was done by estimation of the number of conidia/Petri dish. The experiment was carried out in a random design following a factorial arrangement of 20 x 2 x 2, corresponding to 20 media, two fungi and two environments, with five replicates. The variance analysis of the data evidenced significant statistical difference by the F Test, at 1% probability, among media x fungi x environment interaction. Fifty percent of the tested media provided the adequate micelial growth of A. musiformis and there was no statistical difference among them, namely: cassava meal (FM), sweet starch (PD), "corn meal agar" (CMA), oat in fine flakes (AFF), agar-water + dextrose (AA+D), mycological agar (AM), potato dextrose agar (BDA), meal of maize (FMI), flour of wheat (FT) and wheat for kibble (TK). In relation to A. oligospora, 75% of the tested media promoted the maximum growth of the fungus, which are: AFF, AM, FM, PD, CMA, AA+D, BDA, FT, TK, the water from the decoction of rice (AAZ), rice in grains (AZG), triturated rice (AZT), thread flour (FR), oats flour (FA), oats in thick flakes (AFG) and flour of maize (FU). In relation to the sporulation the media that had better role for A. musiformis, in decreasing order, were: FR, TK, AFG, BDA, FA, AFF, AM, FMI, AZT and FM, varying between 1,01 x 10(6) and 1,4 x 10(4) conidia/Petri dish. For the A. oligospora sporulation, the CMA medium provided the maximum level with an estimated average of 5,7 x 10(6) conidia/Petri dish. In the general, the best media for the micelial growth and sporulation of A. musiformis had also been the best for A. oligospora. However, some that had been the best for the A. oligospora did not had been efficient for the micelial growth or the sporulation of A. musiformis, indicating that the isolate of A. musiformis in case is more demanding than that A. oligospora one. The evidences from the study indicate that, in Jaboticabal, São Paulo state, the growth and the sporulation of these fungi do not demand special chambers. Some adaptations of an environment at the laboratory, enough to obliterate the light are sufficient.

Growth analysis of sweet pepper cultivated in coconut fiber in a greenhouse

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effect of temperature, leaf wetness, and rainfall on the production of Guignardia citricarpa ascospores and on back spot severity on sweet orange

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)