The Practicality of Sustainable Development in Construction

The implementation of sustainable construction practices aims to reduce the environmental impact of development without hindering the economic or social growth of society and industry. An analysis of sustainable construction was conducted to understand the viability, environmental and economic impacts of sustainable building practices. The research indicates sustainable construction offers substantial economic and environmental advantages. However, the construction industry has yet to universally adopt sustainable practices. The solutions I have determined to help foster the adoption of sustainable construction include enhanced planning and design, implementing waste management, educating industry professionals and increasing public awareness about the benefits. The research and recommendations in this project prove the hypothesis and offer solutions that, when implemented will benefit society.

Agriculture and sustainable development: The role of small scale agriculture in obtaining food security

The international community has expressed a renewed interest in small scale agriculture and the role it plays in long-term food security in the face of climate change and population growth. This interest has led to a new development paradigm in which small scale producers are being brought into the global market. Undoubtedly, small scale agriculture should be pursued as a sustainable form of development which can contribute to poverty alleviation, environmental stewardship, and the preservation of genetic diversity. These unique contributions are inherently threatened by a system captured in the idea of the neoliberal food regime. The ability of small scale agriculture to uphold the goals of food security are dependent on recognition and preservation of these contributions.

Better use of resources is the means to growth, prosperity and welfare - but will the EU jump on the opportunity? EPC Commentary, 25 September 2014

As the new European Commission steps in and looks for ways to promote growth and competitiveness, its success will depend on what emphasis will be given to creating a more sustainable European economy. What will determine the EU’s competitiveness and comparative advantage on a global scene is how well we will respond to the ongoing economic and ecological crises – which are intertwined and reinforce each other. The big question is what emphasis will the new Commission and the EU as a whole give to promoting sustainable and greener growth, based on good management of natural resources and biodiversity, smarter use of resources and mitigating climate change?

Financial Sector Development and Integration in the Southern and Eastern Mediterranean: Towards a long-term sustainable transition. MEDPRO Policy Paper No. 7, April 2013

This MEDPRO Policy Paper examines the trends and prospects in financial-sector development and integration in the southern and eastern Mediterranean countries and concludes with an agenda for a long-term sustainable transition where finance turns to be a positive stimulus to long-term growth.

Is the "Dubai model" a new paradigm for growth and investment strategies for oil-based economies? Case study: Eurasia. ACES Working Papers No. 8, 2008

The first part of the paper addresses the theoretical background of economic growth and competitive advantage models. Although there is a whole set of research on a relationship between foreign direct investments and economic growth, little has been said on foreign direct investments and national competitive advantage with respect to economic growth of oil and gas abundant countries of Middle East and Central Asia. The second part of our paper introduces the framework of the so-called "Dubai Model" in detail and outlines the key components necessary to develop sustainable comparative advantage for the oil-rich economies. The third part proceeds with the methodology employed to measure the success of the "Dubai Model" in the UAE and in application to other regions. The last part brings the results and investigates the degree to which other oil and gas countries in the region (i.e. Saudi Arabia, Kuwait, Qatar, Iran) have adopted the so-called "Dubai Model". It also examines if the Dubai Model is being employed in the Eurasian (Central Asian) oil and gas regions of Kazakhstan, Azerbaijan, Turkmenistan and Uzbekistan. The objective is to gauge if the Eurasian economies are employing the traditional growth strategies of oil-rich non-OECD countries in managing their natural resources or are they adopting the newer non-traditional model of economic growth, such as the "Dubai Model."

Determinants of Growth and Inflation in Southern Mediterranean Countries. MEDPRO Technical Report No. 10/March 2012

Despite significant economic reforms in many Southern Mediterranean EU neighbour countries, their growth performance has on average been subdued. This study analyses the differences in growth performance and macroeconomic stability across Mediterranean countries, to draw lessons for the future. The main findings are that Southern Mediterranean countries should benefit from closer ties with the EU that result in higher levels of trade and FDI inflows, once the turbulence of the ‘Arab Spring’ is resolved, and from the development of financial markets and infrastructure. They will also benefit in keeping inflation under control, which will depend in great part on their ability to maintain fiscal discipline and sustainable current accounts. One of the main challenges for the region will be to implement structural reforms that can help them absorb a large pool of unemployed without creating upward risks to inflation.

Household Final Consumption in the EU: The key driver for a sustainable recovery? ECRI Commentary No. 18, 4 December 2015

This commentary finds that after four to five years of poor performance, final consumption of households is expected to recover significantly in 2015 and 2016. This is all the more important since final consumption of households was the main driver of economic growth during the 12 years preceding the financial crisis. Some obstacles still stand in the way, however, preventing a sustainable recovery in private consumption.

Proposal on debt for climate adaptation swaps: a strategy for growth and economic transformation of Caribbean economies

ECLAC advocates that the Caribbean’s high debt dilemma was not principally driven by policy missteps, or the international financial crisis. Rather, it finds its roots in external shocks, compounded by the inherent structural weaknesses and vulnerabilities confronting Caribbean SIDS and their limited capacity to respond. A major factor has been the underperformance of the export sector, partly due to a decline in competitiveness and a slowdown in economic activity especially among the tourism-dependent economies. Caribbean countries have also accumulated debt as a consequence of increased expenditures to address the impact of extreme events and climate change attendant difficulties. Most Caribbean countries are located in the hurricane belt and are also prone to earthquakes and other hazards. Indeed, a disaster resulting in damage and losses in excess of 5 per cent of GDP can be expected to hit any Caribbean country every few years. Moreover, over the period 2000-2014, it is estimated that the economic cost of natural disasters in Caribbean countries was in excess of US$30.7 billion. The English Speaking Caribbean countries are extremely vulnerable to natural disasters.

Economic Survey of Latin America and the Caribbean 2016: The 2030 Agenda for Sustainable Development and the challenges of financing for development

This, the sixty-eighth edition of the Economic Survey of Latin America and the Caribbean, which corresponds to the year 2016, consists of three parts. Part I outlines the region’s economic performance in 2015 and analyses trends in the first half of 2016, as well as the outlook for the rest of the year. It examines the external and internal factors influencing the region’s economic performance and highlights some of the macroeconomic policy challenges that have arisen in an external context of weak growth and high levels of uncertainty. Part II analyses the challenges that the countries of Latin America and the Caribbean face at the domestic and international levels in mobilizing financing for development. On the domestic front, slower growth and tighter fiscal restrictions pose significant challenges for the mobilization of resources. Externally, the classification of many of the region’s countries in the middle-income category limits their access to concessional external financing or international support. Part III of this publication may be accessed on the web page of the Economic Commission for Latin America and the Caribbean (www.eclac.org). It contains the notes relating to the economic performance of the countries of Latin America and the Caribbean in 2015 and the first half of 2016, together with their respective statistical annexes. The cut-off date for updating the statistical information in this publication was 30 June 2016.

Operations and Planning in Sustainable Power Systems

Thesis (Ph.D.)--University of Washington, 2016-06

Fast pyrolysis and nitrogenolysis of biomass and biogenic residues:production of a sustainable slow release fertiliser

The production of agricultural and horticultural products requires the use of nitrogenous fertiliser that can cause pollution of surface and ground water and has a large carbon footprint as it is mainly produced from fossil fuels. The overall objective of this research project was to investigate fast pyrolysis and in-situ nitrogenolysis of biomass and biogenic residues as an alternative route to produce a sustainable solid slow release fertiliser mitigating the above stated problems. A variety of biomasses and biogenic residues were characterized by proximate analysis, ultimate analysis, thermogravimetric analysis (TGA) and Pyrolysis – Gas chromatography – Mass Spectroscopy (Py–GC–MS) for their potential use as feedstocks using beech wood as a reference material. Beech wood was virtually nitrogen free and therefore suitable as a reference material as added nitrogen can be identified as such while Dried Distillers Grains with Solubles (DDGS) and rape meal had a nitrogen content between 5.5wt.% and 6.1wt.% qualifying them as high nitrogen feedstocks. Fast pyrolysis and in-situ nitrogenolysis experiments were carried out in a continuously fed 1kg/h bubbling fluidized bed reactor at around 500°C quenching the pyrolysis vapours with isoparaffin. In-situ nitrogenolysis experiments were performed by adding ammonia gas to the fast pyrolysis reactor at nominal nitrogen addition rates between 5wt.%C and 20wt.%C based on the dry feedstock’s carbon content basis. Mass balances were established for the processing experiments. The fast pyrolysis and in-situ nitrogenolysis products were characterized by proximate analysis, ultimate analysis and GC– MS. High liquid yields and good mass balance closures of over 92% were obtained. The most suitable nitrogen addition rate for the in-situ nitrogenolysis experiments was determined to be 12wt.%C on dry feedstock carbon content basis. However, only a few nitrogen compounds that were formed during in-situ nitrogenolysis could be identified by GC–MS. A batch reactor process was developed to thermally solidify the fast pyrolysis and in-situ nitrogenolysis liquids of beech wood and Barley DDGS producing a brittle solid product. This was obtained at 150°C with an addition of 2.5wt% char (as catalyst) after a processing time of 1h. The batch reactor was also used for modifying and solidifying fast pyrolysis liquids derived from beech wood by adding urea or ammonium phosphate as post processing nitrogenolysis. The results showed that this type of combined approach was not suitable to produce a slow release fertiliser, because the solid product contained up to 65wt.% of highly water soluble nitrogen compounds that would be released instantly by rain. To complement the processing experiments a comparative study via Py–GC–MS with inert and reactive gas was performed with cellulose, hemicellulose, lignin and beech wood. This revealed that the presence of ammonia gas during analytical pyrolysis did not appear to have any direct impact on the decomposition products of the tested materials. The chromatograms obtained showed almost no differences between inert and ammonia gas experiments indicating that the reaction between ammonia and pyrolysis vapours does not occur instantly. A comparative study via Fourier Transformed Infrared Spectroscopy of solidified fast pyrolysis and in-situ nitrogenolysis products showed that there were some alterations in the spectra obtained. A shift in frequencies indicating C=O stretches typically related to the presence of carboxylic acids to C=O stretches related to amides was observed and no double or triple bonded nitrogen was detected. This indicates that organic acids reacted with ammonia and that no potentially harmful or non-biodegradable triple bonded nitrogen compounds were formed. The impact of solid slow release fertiliser (SRF) derived from pyrolysis and in-situ nitrogenolysis products from beech wood and Barley DDGS on microbial life in soils and plant growth was tested in cooperation with Rothamsted Research. The microbial incubation tests indicated that microbes can thrive on the SRFs produced, although some microbial species seem to have a reduced activity at very high concentrations of beech wood and Barley DDGS derived SRF. The plant tests (pot trials) showed that the application of SRF derived from beech wood and barley DDGS had no negative impact on germination or plant growth of rye grass. The fertilizing effect was proven by the dry matter yields in three harvests after 47 days, 89 days and 131 days. The findings of this research indicate that in general a slow release fertiliser can be produced from biomass and biogenic residues by in-situ nitrogenolysis. Nevertheless the findings also show that additional research is necessary to identify which compounds are formed during this process.

The alchemy of entrepreneurial business growth

Two forces that fuel entrepreneurial grown and sustainable change

Logistics by rail:is this the key to more sustainable traffic policies in Northern Germany?

Despite the fact that Germany has a well- expanded traffic infrastructure, the country con-fronts a strong growth in freight volumes and it is very likely that in the forthcoming yearsit will not be able to reasonably cope with the increasing demand. Against this back-ground, the aim of this paper is to provide an in-depth analysis of the transport sector in North Germany in an effort to identify, if any, the possibilities of collapse as a result of the continuous increase in the demand of freight traffic. The research based on the DelphiTechnique, collects, analyses and summarizes the opinions of a group of experts in theaforementioned issues. Results indicate that railways could represent the solution to theforecasted growing freight volumes in the next years, not only in Germany, but also in thewhole European transport sector. In spite of continuous efforts undertaken by the politicsand the economy, the existing logistics and freight traffic concepts are not sufficient. Fi-nancing is too scarce; traffic concepts take issues like sustainability, environment protec-tion and working conditions into little consideration.

Productivity growth and efficiency measurements in fuzzy environments with an application to health care

Health care organizations must continuously improve their productivity to sustain long-term growth and profitability. Sustainable productivity performance is mostly assumed to be a natural outcome of successful health care management. Data envelopment analysis (DEA) is a popular mathematical programming method for comparing the inputs and outputs of a set of homogenous decision making units (DMUs) by evaluating their relative efficiency. The Malmquist productivity index (MPI) is widely used for productivity analysis by relying on constructing a best practice frontier and calculating the relative performance of a DMU for different time periods. The conventional DEA requires accurate and crisp data to calculate the MPI. However, the real-world data are often imprecise and vague. In this study, the authors propose a novel productivity measurement approach in fuzzy environments with MPI. An application of the proposed approach in health care is presented to demonstrate the simplicity and efficacy of the procedures and algorithms in a hospital efficiency study conducted for a State Office of Inspector General in the United States. © 2012, IGI Global.

Sustainable business:key issues

Sustainable Business: Key Issues is the first comprehensive introductory-level textbook to address the interface between environmental challenges and business solutions to provide an overview of the basic concepts of sustainability, sustainable business, and business ethics. The book introduces students to the background and key issues of sustainability and suggests ways in which these concepts can be applied in business practice. Though the book takes a business perspective, it is interdisciplinary in its nature and draws on knowledge from socio-economic, political, and environmental studies, thereby providing a practical and critical understanding of sustainability in the changing paradigm of global business. It goes beyond the conventional theories of sustainability and addresses critical issues concerned with population, consumption and economic growth. It discusses realistic ways forward, in particular the Circular Economy and Cradle to Cradle frameworks. The book is both a theoretical and practical study guide for undergraduate and postgraduate international students of broad areas of sustainability, teaching ways to recognize opportunities for innovation and entrepreneurship at the intersection of environmental, economic, ethical, and social systems. It takes a strategic approach in applying the power of business methods and policy to address issues of global importance such as climate change, poverty, ecosystem degradation and human rights. This textbook is essential reading for students of business, management and sustainability courses. It is written in an engaging and accessible style, with each chapter including case studies, discussion questions, end of chapter summaries and suggestions for further reading.