Solid state F-19 NMR determination of new structure formation in FEP following radiolysis at 300 and 363 K

The radiation chemistry of FEP copolymer with a mole fraction TFE of 0.90 has been studied using Co-60 gamma -radiation at temperatures of 300 and 363 K. New structure formation in the copolymers was analysed by solid state F-19 NMR. New chain scission products were the principal new structures found. The G-value for the formation of new -CF3 groups was 2.2 and 2.1 for the radiolysis of FEP at 300 and 363 K, respectively, and the G-value for the loss of original -CF3 groups was G(-CF3) = 1.0 and 0.9 at these two temperatures, respectively. There was a nett loss of -CF- groups on irradiation, with G(-CF) of 1.3 and 0.9 at 300 and 363 K, respectively. (C) 2001 Elsevier Science Ltd. All rights reserved.

Briefing: Factored material properties and limit state loads-unlikely extreme or impossible pretense

In the limit state design (LSD) method each design criterion is formally stated and assessed using a performance function. The performance function defines the relationship between the design parameters and the design criterion. In practice, LSD involves factoring up loads and factoring down calculated strengths and material parameters. This provides a convenient way to carry out routine probabilistic-based design. The factors are statistically calculated to produce a design with an acceptably low probability of failure. Hence the ultimate load and the design material properties are mathematical concepts that have no physical interpretation. They may be physically impossible. Similarly, the appropriate analysis model is also defined by the performance function and may not describe the real behaviour at the perceived physical equivalent limit condition. These points must be understood to avoid confusion in the discussion and application of partial factor LSD methods.

Information and Technology Implementation Issues in AAL Solutions

With the population ageing effect, the technological developments, and pressure to reduce the cost with healthcare, are reunited the conditions for the development of Ambient Assisted Living (AAL) solutions. This work is a revision of the current state of the art. Its aim is the characterization of the AAL solutions, within the AAL4ALL scope. Therefore, it is presented features, scenarios and projects, referring the limitations and the opportunities for the future developments of prototypes using high level information and technology in AAL environments. Moreover, it is presented guidelines of operation, exposing the conceptual approach, and the discussion and conclusion, which present recommendations and current AAL4ALL project positions in terms of concepts and technologies.

Add/drop filters based on SiC technology for optical interconnects

In this paper we demonstrate an add/drop filter based on SiC technology. Tailoring of the channel bandwidth and wavelength is experimentally demonstrated. The concept is extended to implement a 1 by 4 wavelength division multiplexer with channel separation in the visible range. The device consists of a p-i'(a-SiC:H)-n/p-i(a-Si: H)-n heterostructure. Several monochromatic pulsed lights, separately or in a polychromatic mixture illuminated the device. Independent tuning of each channel is performed by steady state violet bias superimposed either from the front and back sides. Results show that, front background enhances the light-to-dark sensitivity of the long and medium wavelength channels and quench strongly the others. Back violet background has the opposite behaviour. This nonlinearity provides the possibility for selective removal or addition of wavelengths. An optoelectronic model is presented and explains the light filtering properties of the add/drop filter, under different optical bias conditions.

Consistent state software transactional memory

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para a obtenção do Grau de Mestre em Engenharia Informática

Modeling of a solid-state bipolar blumlein generator for N stages

This paper models an n-stage stacked Blumlein generator for bipolar pulses for various load conditions. Calculation of the voltage amplitudes in time domain at the load and between stages is described for an n-stage generator. For this, the reflection and transmission coefficients are mathematically modeled where impedance discontinuity occurs (i.e., at the junctions between two transmission lines). The mathematical model developed is assessed by comparing simulation results to experimental data from a two-stage Blumlein solid-state prototype.

Speech as the basic interface for assistive technology

Speech interfaces for Assistive Technologies are not common and are usually replaced by others. The market they are targeting is not considered attractive and speech technologies are still not well spread. Industry still thinks they present some performance risks, especially Speech Recognition systems. As speech is the most elemental and natural way for communication, it has strong potential for enhancing inclusion and quality of life for broader groups of users with special needs, such as people with cerebral palsy and elderly staying at their homes. This work is a position paper in which the authors argue for the need to make speech become the basic interface in assistive technologies. Among the main arguments, we can state: speech is the easiest way to interact with machines; there is a growing market for embedded speech in assistive technologies, since the number of disabled and elderly people is expanding; speech technology is already mature to be used but needs adaptation to people with special needs; there is still a lot of R&D to be done in this area, especially when thinking about the Portuguese market. The main challenges are presented and future directions are proposed.

Technology governance in radiology: the example of magnetic resonance imaging

Based on the report for the unit “Project III” of the PhD programme on Technology Assessment in 2011. The unit was supervised by Prof. António B. Moniz (FCT-UNL).

Chagas disease in the State of Pernambuco, Brazil: analysis of admissions and mortality time series

INTRODUCTION: A time series study of admissions, deaths and acute cases was conducted in order to evaluate the context of Chagas disease in Pernambuco. METHODS: Data reported to the Information Technology Department of the Brazilian National Health Service between 1980 and 2008 was collected for regions and Federal Units of Brazil; and microregions and municipalities of Pernambuco. Rates (per 100,000 inhabitants) of hospitalization, mortality and acute cases were calculated using a national hospital database (SIH), a national mortality database (SIM) and the national Information System for Notifiable Diseases (SINAN), respectively. RESULTS: The national average for Chagas disease admissions was 0.99 from 1995 to 2008. Pernambuco obtained a mean of 0.39 in the same period, with the highest rates being concentrated in the interior of the state. The state obtained a mean mortality rate of 1.56 between 1980 and 2007, which was lower than the national average (3.66). The mortality rate has tended to decline nationally, while it has remained relatively unchanged in Pernambuco. Interpolating national rates of admissions and deaths, mortality rates were higher than hospitalization rates between 1995 and 2007. The same occurred in Pernambuco, except for 2003. Between 2001 and 2006, rates for acute cases were 0.56 and 0.21 for Brazil and Pernambuco, respectively. CONCLUSIONS: Although a decrease in Chagas mortality has occurred in Brazil, the disease remains a serious public health problem, especially in the Northeast region. It is thus essential that medical care, prevention and control regarding Chagas disease be maintained and improved.

Production of mexican brown macroalgae fucoidan and fucosidases under an integral green technology bioproceses by the biorefinery concept

Marine ecosystem can be considered a rather exploited source of natural substances with enormous bioactive potential. In Mexico macro-algae study remain forgotten for research and economic purposes besides the high amount of this resource along the west and east coast. For that reason the Bioferinery Group of the Autonomous University of Coahuila, have been studying the biorefinery concept in order to recover high value byproducts of Mexican brown macro-algae including polysaccharides and enzymes to be applied in food, pharmaceutical and energy industry. Brown macroalgae are an important source of fucoidan, alginate and laminarin which comprise a complex group of macromolecules with a wide range of important biological properties such as anticoagulant, antioxidant, antitumoral and antiviral and also as rich source of fermentable sugars for enzymes production. Additionally, specific enzymes able to degrade algae matrix (fucosidases, sulfatases, aliginases, etc) are important tools to establish structural characteristics and biological functions of these polysaccharides. The aims of the present work were the integral study of bioprocess for macroalgae biomass exploitation by the use of green technologies as hydrothermal extraction and solid state fermentation in order to produce polysaccharides and enzymes (fucoidan and fucoidan hydrolytic enzymes). This work comprises the use of the different bioprocess phases in order to produce high value products with lower time and wastes.

A study on the performance of technology transfer units

Universities are increasingly institutionalizing activities related to technology transfer and one of the main institutional mechanisms that has emerged is the “technology transfer unit” (TTU). Many of them are focusing their activities on the management of the university intellectual property. Studies have investigated factors that seem to affect their performance, but few have looked in detail at internal procedures and techniques that are used in their processes related to technology evaluation and licensing. The aim of this paper is to provide a comprehensive overview of some of the several steps that comprises the processes regarding technology evaluation and licensing, providing an analysis of the critical issues that affect each step of the process. A review of the literature was made, complemented with interviews to seven university TTUs, which was used as a check and a complement to the literature review and as way of perceiving from an insider perspective, the problems and issues that this paper wants to emphasize and to state clearly.

Piezoelectric poly(vinylidene fluoride) microstructure and poling state in active tissue engineering

Tissue engineering often rely on scaffolds for supporting cell differentiation and growth. Novel paradigms for tissue engineering include the need of active or smart scaffolds in order to properly regenerate specific tissues. In particular, as electrical and electromechanical clues are among the most relevant ones in determining tissue functionality in tissues such as muscle and bone, among others, electroactive materials and, in particular, piezoelectric ones, show strong potential for novel tissue engineering strategies, in particular taking also into account the existence of these phenomena within some specific tissues, indicating their requirement also during tissue regeneration. This referee reports on piezoelectric materials used for tissue engineering applications. The most used materials for tissue engineering strategies are reported together with the main achievements, challenges and future needs for research and actual therapies. This review provides thus a compilation of the most relevant results and strategies and a start point for novel research pathways in the most relevant and challenging open questions.

The state of art of biological processes in paternal care

This review of the state of art aimed to present the most recent data on neuronal, neurochemical, hormonal and genetic bases of paternal care using MEDLINE and PsycInfo databases (1970-2013). An integrated model of biological substrates that assist men in the transition to fatherhood is presented. Guided by a genetic background, hypothalamic-midbrain-limbic-paralimbic-cortical circuits were found to be activated in fathers when infant stimuli are presented. A set of specifi c neuropeptides and steroid hormones are produced and seem to be related to brain activation, potentiating the paternal phenotype. Together, genetic, brain and hormonal processes suggest the existence of biological bases of paternal care in humans, activated and enhanced by infant stimuli and responsive to variations in the father-infant relationship.

An Investigation into Irish State patronage of the visual arts.

The focus of this research is in ascertaining how and why the Irish state patronises the visual arts. The framework that the state puts in place for the support of the arts influences the creation of art. The initial standpoint from which to evaluate the system is founded on the belief that art is of social good. The second source of belief is in the necessity for an autonomous setting in which it can be created. These two beliefs underpin state patronage of the arts in contemporary society. Therefore they have to be examined carefully in order to see if they hold up. This requires an investigation into the formation of value. This is undertaken by looking into the social development of western society and its influence on the placement of arts value. Establishing how arts value to society is defined provides a means by which to investigate the manner in which the state patronises the visual arts. Two case studies provide the evidence in how the state supports the arts and why it chooses to do so. The Irish Museum of Modem Art is used as an example of the state’s role in the maintenance of the canon of art. The second case study looks at the work being done by Breaking Ground. Breaking Ground is an extensive art project as an element of the regeneration process happening in Ballymun funded by the state. It provides and insight into how the state utilises art in the unification of a social group.

Evolution of Cardiovascular Diseases Mortality in the Counties of the State of Rio de Janeiro from 1979 to 2010

Background: Cardiovascular Diseases (CVD) are the leading cause of death in Brazil. Objective: To estimate total CVD, cerebrovascular disease (CBVD), and ischemic heart disease (IHD) mortality rates in adults in the counties of the state of Rio de Janeiro (SRJ), from 1979 to 2010. Methods: The counties of the SRJ were analysed according to their denominations stablished by the geopolitical structure of 1950, Each new county that have since been created, splitting from their original county, was grouped according to their former origin. Population Data were obtained from the Brazilian Institute of Geography and Statistics (IBGE), and data on deaths were obtained from DataSus/MS. Mean CVD, CBVD, and IHD mortality rates were estimated, compensated for deaths from ill-defined causes, and adjusted for age and sex using the direct method for three periods: 1979–1989, 1990–1999, and 2000–2010, Such results were spatially represented in maps. Tables were also constructed showing the mortality rates for each disease and year period. Results: There was a significant reduction in mortality rates across the three disease groups over the the three defined periods in all the county clusters analysed, Despite an initial mortality rate variation among the counties, it was observed a homogenization of such rates at the final period (2000–2010). The drop in CBVD mortality was greater than that in IHD mortality. Conclusion: Mortality due to CVD has steadily decreased in the SRJ in the last three decades. This reduction cannot be explained by greater access to high technology procedures or better control of cardiovascular risk factors as these facts have not occurred or happened in low proportion of cases with the exception of smoking which has decreased significantly. Therefore, it is necessary to seek explanations for this decrease, which may be related to improvements in the socioeconomic conditions of the population.