Nannofossil assemblages and flux rates during the late Oligocene-early Miocene

This study investigates abundance variations in Noelaerhabdaceae assemblages during the late Oligocene-early Miocene at three subtropical sites in the Atlantic and Pacific oceans (DSDP Sites 516, 608 and 588). At these three sites, nannofossil assemblages were characterized by the successive high proportion of Cyclicargolithus, Dictyococcites and Reticulofenestra. Local paleoceanographic changes, such as the input of nutrient-poor water masses, might explain shifts in ecological prominence within the Noelaerhabdaceae at DSDP Site 516 (South Atlantic). But the similar timing of a decline in Cyclicargolithus at the three studied sites more likely corresponds to a global process. Here, we explore possible causes for this long-term taxonomic turnover. A global change in climate, associated with early Miocene glaciations, could have triggered a decline in fitness of the taxon Cyclicargolithus. The ecological niche made vacant because of the decrease in Cyclicargolithus could then have been exploited by Dictyococcites and Reticulofenestra that became prominent in the assemblages after 20.5 Ma. Alternatively, this global turnover might reflect a gradual evolutionary succession and be the result of other selection pressures, such as increased competition between Cyclicargolithus and Dictyococcites/Reticulofenestra. A diversification within Dictyococcites/Reticulofenestra, indicated by an expansion in the size variation within this group since ~ 20.5 Ma, may have contributed to the decreased fitness of Cyclicargolithus.

Geochemistry of serpentinized peridotites from ODP Holes 207-1272A and 207-1274A

Despite the key importance of altered oceanic mantle as a repository and carrier of light elements (B, Li, and Be) to depth, its inventory of these elements has hardly been explored and quantified. In order to constrain the systematics and budget of these elements we have studied samples of highly serpentinized (>50%) spinel harzburgite drilled at the Mid-Atlantic Ridge (Fifteen-Twenty Fracture zone, ODP Leg 209, Sites 1272A and 1274A). In-situ analysis by secondary ion mass spectrometry reveals that the B, Li and Be contents of mantle minerals (olivine, orthopyroxene, and clinopyroxene) remain unchanged during serpentinization. B and Li abundances largely correspond to those of unaltered mantle minerals whereas Be is close to the detection limit. The Li contents of clinopyroxene are slightly higher (0.44-2.8 µg/g) compared to unaltered mantle clinopyroxene, and olivine and clinopyroxene show an inverse Li partitioning compared to literature data. These findings along with textural observations and major element composition obtained from microprobe analysis suggest reaction of the peridotites with a mafic silicate melt before serpentinization. Serpentine minerals are enriched in B (most values between 10 and 100 µg/g), depleted in Li (most values below 1 µg/g) compared to the primary phases, with considerable variation within and between samples. Be is at the detection limit. Analysis of whole rock samples by prompt gamma activation shows that serpentinization tends to increase B (10.4-65.0 µg/g), H2O and Cl contents and to lower Li contents (0.07-3.37 µg/g) of peridotites, implying that-contrary to alteration of oceanic crust-B is fractionated from Li and that the B and Li inventory should depend essentially on rock-water ratios. Based on our results and on literature data, we calculate the inventory of B and Li contained in the oceanic lithosphere, and its partitioning between crust and mantle as a function of plate characteristics. We model four cases, an ODP Leg 209-type lithosphere with almost no igneous crust, and a Semail-type lithosphere with a thick igneous crust, both at 1 and 75 Ma, respectively. The results show that the Li contents of the oceanic lithosphere are highly variable (17-307 kg in a column of 1 m * 1 m * thickness of the lithosphere (kg/col)). They are controlled by the primary mantle phases and by altered crust, whereas the B contents (25-904 kg/col) depend entirely on serpentinization. In all cases, large quantities of B reside in the uppermost part of the plate and could hence be easily liberated during slab dehydration. The most prominent input of Li into subduction zones is to be expected from Semail-type lithosphere because most of the Li is stored at shallow levels in the plate. Subducting an ODP Leg 209-type lithosphere would mean only very little Li contribution from the slab. Serpentinized mantle thus plays an important role in B recycling in subduction zones, but it is of lesser importance for Li.

Sedimentology and Cd/Ca ratios of benthic foraminifera from ODP Site 172-1060 in the western Nort Atlantic

The Western Boundary Undercurrent (WBUC), off eastern America, is an important component of the Atlantic Meridional Overturning circulation and is the principal route for southward transport of North Atlantic waters and southward return of Southern Source Water (SSW). Here a direct flow speed proxy (mean grain size of the sortable silt) is used to infer the vigour of flow of the palaeo-WBUC at Blake Outer Ridge, (ODP Site 1060, depth 3481 m) during Marine Isotope Stage (MIS) 3. The overall shape of the flow speed proxy record shows a complex pattern of variability, with generally more vigorous flow and larger-scale flow variations between 35 and 60 ka than in the younger part of MIS 3 and MIS 2 (b35 ka). Six events of reduced bottom flow vigour (Slow Events, SEs) occur. These appear uncorrelated with Heinrich events, but are instead synchronous with the warming phases of Antarctic Warm Events A-1 to A-4 (with one new one, A-1a and one poorly defined, 'A-0'). This indicates that Antarctic climate exerts a stronger control on deep flow vigour in the North Atlantic during MIS 3 than Northern Hemisphere climate. The correspondence of SEs with Antarctic warming suggests a weaker WBUC flow due to reduced volume flux at SSW source or reduced SSW density. Because the variability of the lower limb of the WBUC was not connected to sharp North Atlantic changes in temperature, it is unlikely that the Dansgaard/Oeschger cycles were associated with a mode of MOC variation involving wholeocean overturn, but more likely with perturbations of only the shallow Glacial Gulf Stream-Glacial Northern Source Intermediate Water cell. Nutrient proxies (benthic carbon isotopes and Cd/Ca of Uvigerina peregrina) at this site show similar trends to the GRIP delta18O record. This correlation has previously been attributed mainly to hydrographic and flow changes but is here shown to be better explained by variations in surface ocean productivity and subsequent decomposition of 12C rich organic material on the sea floor.

delta 13C, delta 15N and delta 34S of temperate eelgrass food web in the western Baltic Sea

Simultaneous triple stable isotope analysis of carbon, nitrogen and sulphur was employed to study the temporal variation in the food web of a subtidal eelgrass (Zostera marina) bed in the western Baltic Sea. Samples of three potential food sources: eelgrass, epiphytes and seston, as well as consumer species were collected biweekly from March through September 2011. Temporal variation of stable isotope signatures was observed in primary producers and consumer species. However, variation within a species, particularly omnivores, often exceeded variation over time. The high degree of omnivory among the generalist feeders in this eelgrass community allows for generalist feeders to flexibly switch food sources, thus enhancing food web stability. As coastal systems are subject to seasonal changes, as well as alterations related to human disturbance and climate, these food webs may retain a certain resilience due to their plentiful omnivores.

Abundance patterns and isotopic signals of morphotypes of Globigerinoides ruber

The chemical composition of shells of the planktonic foraminifer Globigerinoides ruber (white) is frequently used to determine past sea surface conditions. Recently, it has been shown that arbitrarily defined morphotypes within this species exhibit different chemical and isotopic signatures. Here, we investigate the occurrence through time and in space of morphological types of G. ruber (white) in late Quaternary and Holocene sediments of the central and the eastern Mediterranean Sea. In 115 samples representing two distinct time intervals (MIS 1-2 and MIS 9-12) at ODP Site 964 and the piston core GeoTü-SL96, we have defined three morphological types within this species and determined their relative abundances and stable isotopic composition. A quantitative analysis of morphological variation within G. ruber (white) in four samples revealed that the subjectively defined morphotypes occupy separate segments of a continuous and homogenous morphospace. We further show that the abundance of the morphotypes changes significantly between glacials and interglacials and that the three morphotypes of G. ruber show significant offsets in their stable isotopic composition. These offsets are consistent within glacial and interglacial stages but their sign is systematically reversed between the two Sites. Since the isotopic shifts among the three G. ruber morphotypes are systematic and often exceed 1per mil, their understanding is essential for the interpretation of all G. ruber-based proxy records for the paleoceanographic development of the Mediterranean during the late Quaternary.

Development of somatic embryogenesis for cloning and conservation of mature holm oak trees (Quercus ilex L.)

La encina (Quercus ilex L.) es una de las especies forestales mediterráneas más importantes. Constituye gran parte del estrato arbóreo de dehesas o montados, produce bellota como alimento del ganado y establece simbiosis con hongos micorrizógenos de gran valor económico. La encina está considerada como una especie recalcitrante en términos de conservación de semillas y capacidad morfogénica, lo que dificulta los programas de conservación de recursos genéticos y la mejora de la especie. La propagación vegetativa es una potente herramienta de los programas de mejora, por lo que es preciso desarrollar protocolos de regeneración somática en encina. La embriogénesis somática está considerada como la modalidad más adecuada de regeneración basada en técnicas de cultivo de tejidos vegetales utilizada en biotecnología forestal. Este trabajo se centra en el estudio de determinados aspectos de la embriogénesis somática para la regeneración clonal de encinas adultas. La memoria de esta tesis se ha dividido en capítulos que se corresponden con diferentes aspectos del sistema embriogénico. La embriogénesis somática se indujo en tegumentos maternos de óvulos en desarrollo procedentes de bellotas inmaduras de encinas adultas. A pesar de las bajas frecuencias de inducción, las líneas embriogénicas generadas se amplificaron mediante embriogénesis secundaria observándose cierta pérdida de la capacidad de diferenciación con el tiempo. Tanto el genotipo como la formulación del medio de cultivo influyeron en la respuesta embriogénica, concluyendo que la formulación de macronutrientes de Schenk y Hildebrant del medio sin reguladores de crecimiento fue la combinación más efectiva en la inducción. Los resultados sugirieron la existencia de una ventana en el desarrollo del óvulo más sensible a la inducción. El genotipo in[luyó en la capacidad proliferativa de los cultivos y en la conversión de los embriones somáticos, que se incrementó suplementando el medio con ácido indol-3-butírico y 6-benciladenina. El cultivo en medio líquido de líneas embriogénicas en condiciones de inmersión transitoria incrementó el crecimiento, dependiendo del genotipo, con respecto al cultivo en medio semisólido. Sin embargo, no mejoró la capacidad de diferenciar embriones cotiledonares aislados. Se estableció un protocolo de inicio y mantenimiento de cultivos en suspensión para varias líneas embriogénicas mediante inoculación en alta densidad de agregados embrionarios procedentes del medio semisólido. Para evitar la pérdida de vigor y la capacidad morfogénica debida al cultivo prolongado se desarrolló un protocolo de crioconservación de líneas embriogénicas mediante vitrificación. Al determinar la influencia de los agentes crioprotectores antes y después de su inmersión en nitrógeno líquido se concluyó que las respuestas de capacidad de crecimiento y de diferenciación del material embriogénico son independientes, además de estar bajo influencia del genotipo y el tipo de material crioconservado. La combinación de sacarosa y PVS2 previa a la inmersión en nitrógeno líquido proporcionó la mayor tasa de recuperación. Cuando las líneas fueron crioconservadas 30 días la capacidad de diferenciación se perdió en todas ellas. El análisis de SSR detectó variación somaclonal en el material crioconservado a corto plazo. SSR y RAPD mostraron importantes diferencias genéticas entre los árboles donantes y el material embriogénico que dependieron del genotipo. El grado de detección dependió del marcador empleado. Ambos marcadores revelaron baja inestabilidad intraclonal. Los RAPD revelaron variación genética intra-individuo en las encinas donantes. Se discuten la variación genética pre-existente en encina, su aparición durante las primeras fases de la inducción de embriogénesis, y la presencia de tejidos provenientes de la fertilización en el explanto materno. Esto hace preciso definir la identidad genética del material donante y acometer ensayos de detección precoz de variación somaclonal. ABSTRACT Holm oak (Quercus ilex L.) is one of the most important Mediterranean forest species. It conforms the tree layer of dehesas or montados, it produces acorns to feed the livestock and it establishes symbiosis with profitable mycorrhizal fungi. Holm oak is considered as recalcitrant species in terms of seed conservation and morphogenic capacities, which complicates the development of genetic conservation and improvement programs. Vegetative propagation is one of the mightiest tools for breeding programs therefore; developing protocols for clonal regeneration of holm oak is essential. Somatic embryogenesis is considered the best tissue culture-based way of plant regeneration in forest biotechnology. The present study is focused on the study of certain aspects of somatic embryogenesis for clonal regeneration of mature holm oak. This thesis manuscript is divided into several chapters that match with different aspects of the embryogenic system. Somatic embryogenesis induction was achieved on maternal teguments of developing ovules from immature acorns of adult holm oak trees. Despite the low induction frequencies, the generated embryogenic lines were amplified by secondary embryogenesis. A decline in the differentiation capacity over time was also observed. It was concluded that both genotype and culture media formulation influenced the embryogenic response, being the Schenk and Hildebrandt´s macronutrients formulation from culture medium and the lack of plant growth regulators the most effective combination for the induction of the embryogenic response. It has been suggested the existence of a developmental window in which ovules are prone to induction. Genotype influenced the proliferation capacity and the plant conversion of somatic embryos, which was also favoured by the presence of indol-3-butyric acid and 6-bencyladenine. The use of temporary immersion systems as proliferation in liquid culture of the embryogenic lines increased the growth depending on genotype, when compared to semisolid cultures. However, it did not improve the differentiation of single cotyledonary embryos. A protocol for the initiation and maintenance of embryogenic suspension cultures was established for several embryogenic lines with highly dense inoculi of embryogenic clusters from proliferating semisolid cultures. In order to avoid the loss of vigour and morphogenic ability of embryogenic lines due to prolonged cultures, a cryopreservation protocol for embryogenic lines of holm oak has been developed. During the determination of the influence of cryoprotective agents on the growth and differentiation capacities before and after liquid nitrogen immersion, it was concluded that both responses were independent from each other and also under the influence of genotype and the type of cryopreserved material. The combination of sucrose and PVS2 prior liquid nitrogen immersion provided higher recovery rates. When the same embryogenic lines were cryopreserved for 30 days, none was able to differentiate. The SSRs analysis of the short-term cryopreserved material detected somaclonal variation. Both SSR and RAPD markers showed high sensitivity to detect genetic differences between the donor trees and the generated embryogenic material. Nevertheless, the degree of instability detection depended on the marker. The SSR analysis indicated a relationship between genotype, the studied loci and the located polymorphisms. Also, both markers revealed low intraclonal genetic variation. The RAPD detected genetic variation within the donor trees. The presence of pre-existent genetic variation within mature trees, in addition to its occurrence during the early stages of the embryogenic induction, and the presence of tissues of fertilisation origin within the maternal explants are all discussed. Nonetheless, the determination of the genetic identity of donor material is required, in addition to early detection methods of somaclonal variation.

Development of somatic embryogenesis for cloning and conservation of mature holm oak trees (Quercus ilex L.)

La encina (Quercus ilex L.) es una de las especies forestales mediterráneas más importantes. Constituye gran parte del estrato arbóreo de dehesas o montados, produce bellota como alimento del ganado y establece simbiosis con hongos micorrizógenos de gran valor económico. La encina está considerada como una especie recalcitrante en términos de conservación de semillas y capacidad morfogénica, lo que dificulta los programas de conservación de recursos genéticos y la mejora de la especie. La propagación vegetativa es una potente herramienta de los programas de mejora, por lo que es preciso desarrollar protocolos de regeneración somática en encina. La embriogénesis somática está considerada como la modalidad más adecuada de regeneración basada en técnicas de cultivo de tejidos vegetales utilizada en biotecnología forestal. Este trabajo se centra en el estudio de determinados aspectos de la embriogénesis somática para la regeneración clonal de encinas adultas. La memoria de esta tesis se ha dividido en capítulos que se corresponden con diferentes aspectos del sistema embriogénico. La embriogénesis somática se indujo en tegumentos maternos de óvulos en desarrollo procedentes de bellotas inmaduras de encinas adultas. A pesar de las bajas frecuencias de inducción, las líneas embriogénicas generadas se amplificaron mediante embriogénesis secundaria observándose cierta pérdida de la capacidad de diferenciación con el tiempo. Tanto el genotipo como la formulación del medio de cultivo influyeron en la respuesta embriogénica, concluyendo que la formulación de macronutrientes de Schenk y Hildebrant del medio sin reguladores de crecimiento fue la combinación más efectiva en la inducción. Los resultados sugirieron la existencia de una ventana en el desarrollo del óvulo más sensible a la inducción. El genotipo in[luyó en la capacidad proliferativa de los cultivos y en la conversión de los embriones somáticos, que se incrementó suplementando el medio con ácido indol-3-butírico y 6-benciladenina. El cultivo en medio líquido de líneas embriogénicas en condiciones de inmersión transitoria incrementó el crecimiento, dependiendo del genotipo, con respecto al cultivo en medio semisólido. Sin embargo, no mejoró la capacidad de diferenciar embriones cotiledonares aislados. Se estableció un protocolo de inicio y mantenimiento de cultivos en suspensión para varias líneas embriogénicas mediante inoculación en alta densidad de agregados embrionarios procedentes del medio semisólido. Para evitar la pérdida de vigor y la capacidad morfogénica debida al cultivo prolongado se desarrolló un protocolo de crioconservación de líneas embriogénicas mediante vitrificación. Al determinar la influencia de los agentes crioprotectores antes y después de su inmersión en nitrógeno líquido se concluyó que las respuestas de capacidad de crecimiento y de diferenciación del material embriogénico son independientes, además de estar bajo influencia del genotipo y el tipo de material crioconservado. La combinación de sacarosa y PVS2 previa a la inmersión en nitrógeno líquido proporcionó la mayor tasa de recuperación. Cuando las líneas fueron crioconservadas 30 días la capacidad de diferenciación se perdió en todas ellas. El análisis de SSR detectó variación somaclonal en el material crioconservado a corto plazo. SSR y RAPD mostraron importantes diferencias genéticas entre los árboles donantes y el material embriogénico que dependieron del genotipo. El grado de detección dependió del marcador empleado. Ambos marcadores revelaron baja inestabilidad intraclonal. Los RAPD revelaron variación genética intra-individuo en las encinas donantes. Se discuten la variación genética pre-existente en encina, su aparición durante las primeras fases de la inducción de embriogénesis, y la presencia de tejidos provenientes de la fertilización en el explanto materno. Esto hace preciso definir la identidad genética del material donante y acometer ensayos de detección precoz de variación somaclonal. ABSTRACT Holm oak (Quercus ilex L.) is one of the most important Mediterranean forest species. It conforms the tree layer of dehesas or montados, it produces acorns to feed the livestock and it establishes symbiosis with profitable mycorrhizal fungi. Holm oak is considered as recalcitrant species in terms of seed conservation and morphogenic capacities, which complicates the development of genetic conservation and improvement programs. Vegetative propagation is one of the mightiest tools for breeding programs therefore; developing protocols for clonal regeneration of holm oak is essential. Somatic embryogenesis is considered the best tissue culture-based way of plant regeneration in forest biotechnology. The present study is focused on the study of certain aspects of somatic embryogenesis for clonal regeneration of mature holm oak. This thesis manuscript is divided into several chapters that match with different aspects of the embryogenic system. Somatic embryogenesis induction was achieved on maternal teguments of developing ovules from immature acorns of adult holm oak trees. Despite the low induction frequencies, the generated embryogenic lines were amplified by secondary embryogenesis. A decline in the differentiation capacity over time was also observed. It was concluded that both genotype and culture media formulation influenced the embryogenic response, being the Schenk and Hildebrandt´s macronutrients formulation from culture medium and the lack of plant growth regulators the most effective combination for the induction of the embryogenic response. It has been suggested the existence of a developmental window in which ovules are prone to induction. Genotype influenced the proliferation capacity and the plant conversion of somatic embryos, which was also favoured by the presence of indol-3-butyric acid and 6-bencyladenine. The use of temporary immersion systems as proliferation in liquid culture of the embryogenic lines increased the growth depending on genotype, when compared to semisolid cultures. However, it did not improve the differentiation of single cotyledonary embryos. A protocol for the initiation and maintenance of embryogenic suspension cultures was established for several embryogenic lines with highly dense inoculi of embryogenic clusters from proliferating semisolid cultures. In order to avoid the loss of vigour and morphogenic ability of embryogenic lines due to prolonged cultures, a cryopreservation protocol for embryogenic lines of holm oak has been developed. During the determination of the influence of cryoprotective agents on the growth and differentiation capacities before and after liquid nitrogen immersion, it was concluded that both responses were independent from each other and also under the influence of genotype and the type of cryopreserved material. The combination of sucrose and PVS2 prior liquid nitrogen immersion provided higher recovery rates. When the same embryogenic lines were cryopreserved for 30 days, none was able to differentiate. The SSRs analysis of the short-term cryopreserved material detected somaclonal variation. Both SSR and RAPD markers showed high sensitivity to detect genetic differences between the donor trees and the generated embryogenic material. Nevertheless, the degree of instability detection depended on the marker. The SSR analysis indicated a relationship between genotype, the studied loci and the located polymorphisms. Also, both markers revealed low intraclonal genetic variation. The RAPD detected genetic variation within the donor trees. The presence of pre-existent genetic variation within mature trees, in addition to its occurrence during the early stages of the embryogenic induction, and the presence of tissues of fertilisation origin within the maternal explants are all discussed. Nonetheless, the determination of the genetic identity of donor material is required, in addition to early detection methods of somaclonal variation.

Diseño de un modelo para la identificación y análisis de tramos de carreteras sin accidentes : una nueva visión de la seguridad vial

El planteamiento tradicional de análisis de la accidentalidad en carretera pasa por la consideración de herramientas paliativas, como son la identificación y gestión de los puntos negros o tramos de concentración de accidentes, o preventivas, como las auditorías e inspecciones de seguridad vial. En esta tesis doctoral se presenta un planteamiento complementario a estas herramientas, desde una perspectiva novedosa: la consideración de los tramos donde no se producen accidentes; son los denominados Tramos Blancos. La tesis persigue demostrar que existen determinados parámetros del diseño de las carreteras y del tráfico que, bajo características generales similares de las vías, tienen influencia en el hecho de que se produzcan o no accidentes, adicionalmente a la exposición al riesgo, como factor principal, y a otros factores. La propia definición de los Tramos Blancos, entendidos como tramos de carreteras de longitud representativa donde no se han producido accidentes con víctimas mortales o heridos graves durante un periodo largo de tiempo, garantiza que esta situación no se produzca como consecuencia de la aleatoriedad de los accidentes, sino que pudiera deberse a una confluencia específica de determinados parámetros de la geometría de la vía y del tráfico total y de vehículos pesados. Para el desarrollo de esta investigación se han considerado la red de autopistas de peaje y las carreteras convencionales de la Red del Estado de España, que supone un total de 17.000 kilómetros, y los datos de accidentes con víctimas mortales y heridos graves en el periodo 2006-2010, ambos incluidos, en estas redes (un total de 10.000 accidentes). La red viaria objeto de análisis supone el 65% de la longitud de la Red de Carreteras del Estado, por la que circula el 33% de su tráfico; en ella se produjeron en el año 2013 el 47% de los accidentes con víctimas y el 60% de las víctimas mortales de la Red de Carreteras del Estado. Durante la investigación se ha desarrollado una base de datos de 250.130 registros y más de 3.5 millones de datos en el caso de las autopistas de peaje de la Red de Carreteras del Estado y de 935.402 registros y más de 14 millones de datos en el caso de la red convencional del Estado analizada. Tanto las autopistas de peaje como las carreteras convencionales han sido clasificadas según sus características de tráfico, de manera que se valoren vías con nivel de exposición al riesgo similar. Para cada tipología de vía, se ha definido como longitud de referencia para que un tramo se considere Tramo Blanco la longitud igual al percentil 95 de las longitudes de tramos sin accidentes con heridos graves o víctimas mortales durante el periodo 2006-2010. En el caso de las autopistas de peaje, en la tipología que ha sido considerada para la definición del modelo, esta longitud de referencia se estableció en 14.5 kilómetros, mientras que en el caso de las carreteras convencionales, se estableció en 7.75 kilómetros. Para cada uno de los tipos de vía considerados se han construido una base de datos en la que se han incluido las variables de existencia o no de Tramo Blanco, así como las variables de tráfico (intensidad media diaria total, intensidad de vehículos pesados y porcentaje de vehículos pesados ), la velocidad media y las variables de geometría (número de carriles, ancho de carril, ancho de arcén derecho e izquierdo, ancho de calzada y plataforma, radio, peralte, pendiente y visibilidad directa e inversa en los casos disponibles); como variables adicionales, se han incluido el número de accidentes con víctimas, los fallecidos y heridos graves, índices de peligrosidad, índices de mortalidad y exposición al riesgo. Los trabajos desarrollados para explicar la presencia de Tramos Blancos en la red de autopistas de peaje han permitido establecer las diferencias entre los valores medios de las variables de tráfico y diseño geométrico en Tramos Blancos respecto a tramos no blancos y comprobar que estas diferencias son significativas. Así mismo, se ha podido calibrar un modelo de regresión logística que explica parcialmente la existencia de Tramos Blancos, para rangos de tráfico inferiores a 10.000 vehículos diarios y para tráficos entre 10.000 y 15.000 vehículos diarios. Para el primer grupo (menos de 10.000 vehículos al día), las variables que han demostrado tener una mayor influencia en la existencia de Tramo Blanco son la velocidad media de circulación, el ancho de carril, el ancho de arcén izquierdo y el porcentaje de vehículos pesados. Para el segundo grupo (entre 10.000 y 15.000 vehículos al día), las variables independientes más influyentes en la existencia de Tramo Blanco han sido la velocidad de circulación, el ancho de calzada y el porcentaje de vehículos pesados. En el caso de las carreteras convencionales, los diferentes análisis realizados no han permitido identificar un modelo que consiga una buena clasificación de los Tramos Blancos. Aun así, se puede afirmar que los valores medios de las variables de intensidad de tráfico, radio, visibilidad, peralte y pendiente presentan diferencias significativas en los Tramos Blancos respecto a los no blancos, que varían en función de la intensidad de tráfico. Los resultados obtenidos deben considerarse como la conclusión de un análisis preliminar, dado que existen otros parámetros, tanto de diseño de la vía como de la circulación, el entorno, el factor humano o el vehículo que podrían tener una influencia en el hecho que se analiza, y no se han considerado por no disponer de esta información. En esta misma línea, el análisis de las circunstancias que rodean al viaje que el usuario de la vía realiza, su tipología y motivación es una fuente de información de interés de la que no se tienen datos y que permitiría mejorar el análisis de accidentalidad en general, y en particular el de esta investigación. Adicionalmente, se reconocen limitaciones en el desarrollo de esta investigación, en las que sería preciso profundizar en el futuro, reconociendo así nuevas líneas de investigación de interés. The traditional approach to road accidents analysis has been based in the use of palliative tools, such as black spot (or road sections) identification and management, or preventive tools, such as road safety audits and inspections. This thesis shows a complementary approach to the existing tools, from a new perspective: the consideration of road sections where no accidents have occurred; these are the so-called White Road Sections. The aim of this thesis is to show that there are certain design parameters and traffic characteristics which, under similar circumstances for roads, have influence in the fact that accidents occur, in addition to the main factor, which is the risk exposure, and others. White Road Sections, defined as road sections of a representative length, where no fatal accidents or accidents involving serious injured have happened during a long period of time, should not be a product of randomness of accidents; on the contrary, they might be the consequence of a confluence of specific parameters of road geometry, traffic volumes and heavy vehicles traffic volumes. For this research, the toll motorway network and single-carriageway network of the Spanish National Road Network have been considered, which is a total of 17.000 kilometers; fatal accidents and those involving serious injured from the period 2006-2010 have been considered (a total number of 10.000 accidents). The road network covered means 65% of the total length of the National Road Network, which allocates 33% of traffic volume; 47% of accidents with victims and 60% of fatalities happened in these road networks during 2013. During the research, a database of 250.130 registers and more than 3.5 million data for toll motorways and 935.042 registers and more than 14 million data for single carriageways of the National Road Network was developed. Both toll motorways and single-carriageways have been classified according to their traffic characteristics, so that the analysis is performed over roads with similar risk exposure. For each road type, a reference length for White Road Section has been defined, as the 95 percentile of all road sections lengths without accidents (with fatalities or serious injured) for 2006-2010. For toll motorways, this reference length concluded to be 14.5 kilometers, while for single-carriageways, it was defined as 7.75 kilometers. A detailed database was developed for each type of road, including the variable “existence of White Road Section”, as well as variables of traffic (average daily traffic volume, heavy vehicles average daily traffic and percentage of heavy vehicles from the total traffic volume), average speed and geometry variables (number of lanes, width of lane, width of shoulders, carriageway width, platform width, radius, superelevation, slope and visibility); additional variables, such as number of accidents with victims, number of fatalities or serious injured, risk and fatality rates and risk exposure, have also been included. Research conducted for the explanation of the presence of White Road Sections in the toll motorway network have shown statistically significant differences in the average values of variables of traffic and geometric design in White Road Sections compared with other road sections. In addition, a binary logistic model for the partial explanation of the presence of White Road Sections was developed, for traffic volumes lower than 10.000 daily vehicles and for those running from 10.000 to 15.000 daily vehicles. For the first group, the most influent variables for the presence of White Road Sections were the average speed, width of lane, width of left shoulder and percentage of heavy vehicles. For the second group, the most influent variables were found to be average speed, carriageway width and percentage of heavy vehicles. For single-carriageways, the different analysis developed did not reach a proper model for the explanation of White Road Sections. However, it can be assumed that the average values of the variables of traffic volume, radius, visibility, superelevation and slope show significant differences in White Road Sections if compared with others, which also vary with traffic volumes. Results obtained should be considered as a conclusion of a preliminary analysis, as there are other parameters, not only design-related, but also regarding traffic, environment, human factor and vehicle which could have an influence in the fact under research, but this information has not been considered in the analysis, as it was not available. In parallel, the analysis of the circumstances around the trip, including its typology and motivation is an interesting source of information, from which data are not available; the availability of this information would be useful for the improvement of accident analysis, in general, and for this research work, in particular. In addition, there are some limitations in the development of the research work; it would be necessary to develop an in-depth analysis in the future, thus assuming new research lines of interest.

Disrupting evolutionary processes: The effect of habitat fragmentation on collared lizards in the Missouri Ozarks

Humans affect biodiversity at the genetic, species, community, and ecosystem levels. This impact on genetic diversity is critical, because genetic diversity is the raw material of evolutionary change, including adaptation and speciation. Two forces affecting genetic variation are genetic drift (which decreases genetic variation within but increases genetic differentiation among local populations) and gene flow (which increases variation within but decreases differentiation among local populations). Humans activities often augment drift and diminish gene flow for many species, which reduces genetic variation in local populations and prevents the spread of adaptive complexes outside their population of origin, thereby disrupting adaptive processes both locally and globally within a species. These impacts are illustrated with collared lizards (Crotaphytus collaris) in the Missouri Ozarks. Forest fire suppression has reduced habitat and disrupted gene flow in this lizard, thereby altering the balance toward drift and away from gene flow. This balance can be restored by managed landscape burns. Some have argued that, although human-induced fragmentation disrupts adaptation, it will also ultimately produce new species through founder effects. However, population genetic theory and experiments predict that most fragmentation events caused by human activities will facilitate not speciation, but local extinction. Founder events have played an important role in the macroevolution of certain groups, but only when ecological opportunities are expanding rather than contracting. The general impact of human activities on genetic diversity disrupts or diminishes the capacity for adaptation, speciation, and macroevolutionary change. This impact will ultimately diminish biodiversity at all levels.