Simulação de diferentes estratégias de seleção na bubalinocultura leiteira

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Planejamento de redes de comunicação sem fio para ambientes indoor considerando aplicações multimídia: abordagem híbrida - simulação e medição

As tecnologias wireless vêm evoluindo de forma rápida nas últimas décadas, pois são uma eficiente alternativa para transmissão de informações, sejam dados, voz, vídeos e demais serviços de rede. O conhecimento do processo de propagação dessas informações em diferentes ambientes é um fator de grande importância para o planejamento e o desenvolvimento de sistemas de comunicações sem fio. Devido ao rápido avanço e popularização dessas redes, os serviços oferecidos tornaram-se mais complexos e com isso, necessitam de requisitos de qualidades para que sejam ofertados ao usuário final de forma satisfatória. Devido a isso, torna-se necessário aos projetistas desses sistemas, uma metodologia que ofereça uma melhor avaliação do ambiente indoor. Essa avaliação é feita através da análise da área de cobertura e do comportamento das métricas de serviços multimídia em qualquer posição do ambiente que está recebendo o serviço. O trabalho desenvolvido nessa dissertação objetiva avaliar uma metodologia para a predição de métricas de qualidade de experiência. Para isso, foram realizadas campanhas de medições de transmissões de vídeo em uma rede sem fio e foram avaliados alguns parâmetros da rede (jitter de pacotes/frames, perda de pacotes/frames) e alguns parâmetros de qualidade de experiência (PSNR, SSIM e VQM). Os resultados apresentaram boa concordância com os modelos da literatura e com as medições.

Desenvolvimento e avaliação de indicadores de eficiência hidraúlica e energética para sistemas de abastecimento de água como ferramenta de suporte à tomada de decisões

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação de força de preensão manual e teste de usabilidade em embalagens com tampas de segurança: parâmetros para o design ergonômico

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação do comportamento de superfícies de fratura por fractais mistos em materiais de diferentes classes

Pós-graduação em Engenharia Mecânica - FEG

Desenvolvimento experimental e simulação numérica de uma réplica térmica de placa de circuito impresso

Pós-graduação em Engenharia Mecânica - FEIS

Avaliação do herbicida saflufenacil no controle de Ipomoea grandifolia (Dammer) O’Donell e Euphorbia heterophylla L. no sistema de cana crua

Pós-graduação em Agronomia (Agricultura) - FCA

Avaliação do efeito da inclinação e umidade antecedente na qualidade e quantidade das parcelas escoadas, percoladas e armazenadas em telhado verde extensivo

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação de impactos ambientais de equipamentos eletroeletrônicos através de inventário dos materiais usados na fabricação

Pós-graduação em Engenharia Civil e Ambiental - FEB

Órtese de tornozelo: efeito sobre a razão de pico torque muscular eversor excêntrico/inversor concêntrico do tornozelo durante simulação do basquetebol

The ankle sprains represent the most common injuries in sports and basketball. In this sense, the use of ankle bracing and strength capacity analysis of the ankle evertor and invertor muscles, have been suggested as preventive measures and important tools for identifying risk factors associated with ankle sprains. However, questions still persist as to effect of the use ankle bracing on biomechanical variables related to the stability of the ankle. For this reason, this study aims to analyze the effect of the use of ankle bracing on peak torque (PT) of ankle evertor and invertor muscles and on eccentric evertor/concentric invertor torque ratio (EVEECC/INVCON), during the basketball match-play simulation. Ten healthy college basketball players, without mechanics or functional ankle instability performed a laboratory-based protocol representative of work rates observed during basketball match-play, in two different situations, with and without use of ankle bracing. The test was composed of a succession of intermittent physical effort equally distributed in four periods of 10 minutes each, considering the mechanical and physiological demands of a basketball match-play. Prior to the start of the trial (Evaluation 1) and after 2° (Evaluation 2) and 4° (Evaluation 3) periods, the subjects performed five maximal isokinetic concentric and eccentric contractions of ankle invertor and evertor muscles, separated by two minutes rest, at 60 °/s and 120 °/s. After testing for normality of data distribution with the Shapiro-Wilk test, was used the ANOVA repeated measures for two factors and post-hoc Bonferroni test for comparison of variables between assessments. Was adopted p < 0.05. There was no significant difference for PT and EVEECC/INVCON torque ratio between assessments. There was a decrease in PT EVEECC at 60º/s and 120º/s for the ...(Complete abstract click electronic access below)

Caracterização e origem da composição química da incrustação e simulação de cenários de perda de energia em setor da rede de abastecimento de água da cidade de Rio Claro - SP

The purpose of this work was the inlay’s characterization from the water supply networks of Rio Claro-SP city; as well analyze the influence of network’s aging in the actual system. To do this, some samples of inlays were collected and made chemistry analysis and X-Ray Diffraction Spectrometry. The history of the source water quality was also analyzed, to make possible to known the origins of the inlays. To evaluate the performance of the network, some different scenarios have been simulated, varying the resistance coefficient of the water supply networks of Rio Claro-SP. The characterization results showed that there are basically oxide and hydroxide of iron (magnetite and goethite) and quartz in the inlays, which are materials of high hardness. The hydraulic simulations indicated that the simulated scenarios had a variation of ~2000% in terms of loss of energy

Análise comparativa de softwares de simulação de onda de cheia e corridas de massa

This scientific research aimed at presenting a comparative analysis of softwares used to represent the processes of flood wave and debris flow. For this, a literature review was performed on these processes and on simulation models used to represent them. Then, a research on scientific database and developers’ websites was performed to identify the softwares used to simulate these processes. This step was performed based on specific criteria such as the type of simulation performed by the software, its practical applications and a user friendly interface. A free distribution and totally functional software was chosen and its simulation mechanisms were tested through a simulation exercise and the results interpreted based on data on measured in the Basin of Ribeirão Marins section Monjolinho located in Piracicaba - SP. With respect to the processes, it was sought to present the dynamics, constraints, parameters and variables used to understand them and for the simulation models were presented the conceptual aspects of mathematical modeling including the steps of the simulation process and the different types of simulation models used to represent them. In total, 20 softwares were identified, and the software object of analysis was the ABC 6 that performs simulation of flood wave. Through the simulation exercise, it was observed that were presented overestimated values of flow compared to measured data in the basin. For both hypotheses were raised about the causes of the discrepancy between the observed and simulated flow. It has been concluded that the simulation process consisted of a complex procedure where generalizations, misrepresentations and simplifications may occur due to the data used and the method adopted, but it is a useful tool in planning and decision making in various types of studies and environmental projects

Avaliação das condições de contorno da teoria de Hertz, comparando os resultados analíticos e numéricos a partir de simulações em software de elementos finitos

The objective of this study was to present the comparison between analytical and numerical results trying to identify the differences and behaviors of the variation of the principal stresses and the maximum contact pressure for different model configurations. The analytical equations of the theory of Hertz from the boundary conditions adopted by him were differences are shown. A step-by-step of developing the model indicating the geometric dimensions, surface contact, type of contact, the formulation used by the software, type of mesh, as well as the boundary conditions and load was presented. In the results, the stresses calculated analytically and compared with the stresses obtained by the finite element simulation software indicating the changes have been made

Modelagem e avaliação de um sistema de refrigeração por absorção para residências e instalações de pequeno porte

This work presents a study of the absorption refrigeration system and the modeling and evaluation of two cycles using the binary solutions water-lithium bromide and ammonia-water for an equipment to be used in small size plants like residences. The study and evaluation aims the complete understanding of all parts of the system and the influence of each one of them as well as the spread of the knowledge to raise the use of this type of equipment in all sizes in order to decrease the energetic consumption of plants of all scales and making viable the alternative sources. The study is done in each element of the cycle separately and in some auxiliary equipments required in the operation such as the main power source, the solar collector. The software used for modeling, with emphasis on thermal part, was the EES (Engineering Equation Solver), that permitted the thermal balance calculus and acquisition of the used fluids properties. The results obtained for the equipment shows the system is more complex than the widely used in business, however, it can be viable and represents an alternative to increase the energetic efficiency

Avaliação de momentos fletores em estruturas de fundação tipo radier em concreto armado

It aims the comparison of these moments between an analytical plates theory and a computational numerical simulation. It is accented the details of studies about analytical theory as well the process, step by step, of a program that has as an influence the method of finite elements. The theory of plates has an extremely importance when it is talked about slabs and it takes as a base some fundamental hypotheses (that the middle point of the plate is considered flat and under formable) the points that are normal in relation to the middle surface is not considered because of its intensity that is irrelevant in comparison to the rest. The computational programs offer good results when they are applied in a correct way and, it resolves numerous functions in a short period of time. The objective is to highlight the importance of bending moments, its points of maximum and minimum, that has the objective of realize a good reinforcement sizing for a reinforced concrete. Furthermore, it can propitiate an economy in places that is demanded a small quantity of steel, before dimensioned for a load that is distributed in all the surface of the plate, at the same intensity