Volsurf Descriptors to Analyse Anti-HCV and Cytotoxic Activities of Sesquiterpene Lactones from Asteraceae Family

Various significant anti-HCV and cytotoxic sesquiterpene lactones (SLs) have been characterized. In this work, the chemometric tool Principal Component Analysis (PCA) was applied to two sets of SLs and the variance of the biological activity was explored. The first principal component accounts for as much of the variability in the data as possible, and each succeeding component accounts for as much of the remaining variability as possible. The calculations were performed using VolSurf program. For anti-HCV activity, PC1 (First Principal Component) explained 30.3% and PC2 (Second Principal Component) explained 26.5% of matrix total variance, while for cytotoxic activity, PC1 explained 30.9% and PC2 explained 15.6% of the total variance. The formalism employed generated good exploratory and predictive results and we identified some structural features, for both sets, important to the suitable biological activity and pharmacokinetic profile.

Feasibility study for the preparation of a tuna fish candidate reference material for total As determination

This work describes the evaluation of several parameters for the preparation of a tuna fish candidate as a reference material (RM) in order to measure the total As mass fraction by slurry sampling graphite furnace atomic absorption spectrometry (SLS-GF AAS) and slurry sampling hydride generation atomic absorption spectrometry (SLS-HG AAS). The main parameters investigated were the homogeneity, analyte segregation and composition during material production. For candidate RM preparation, tuna fish was collected at a local market, cleaned, freeze-dried and treated using different procedures as follows: (1) ground in a cutting mill and separated in different particle sizes (2) ground in cryogenic mill. The mass fraction of As in the cryogenically ground sample was (4.77 +/- A 0.19) mu g g(-1) for SLS-GF AAS and (4.61 +/- A 0.34) mu g g(-1) for SLS-HG AAS. The accuracy of the procedures was checked with tuna fish certified reference material (BCR 627) with recoveries of 102 and 94% for SLS-GF AAS and SLS-HG AAS, respectively. The homogeneity factor was calculated for different pretreatment procedures and for particle sizes in the range of 500-150 mu g, indicating good homogeneity, except for raw fish. There was no observed analyte segregation and no losses, no contamination and no changes in the microdistribution of material during preparation.

Systemintegration mellan Java och VB.NET med webservices

I dagens näringsliv är effektiv kommunikation och informationsutbyte mellan företag en förutsättning för verksamheten. Näringslivet utmärks av förändring; företag köps upp, företag slås samman, företag samarbetar i projektform. Behovet av att integrera varandras informationssystem står i paritet med ovanstående förändringar. Ett stort problem med systemintegration är variationsrikedomen mellan informationssystemen, beträffande teknisk plattform och programspråk. Webservices erbjuder metoder att enkelt integrera olika informationssystem med varandra.I rapporten beskrivs hur webservices implementeras och vilka tekniska komponenter som ingår, samt de fördelar som webservicetekniken ger. Uppdraget från Sogeti, Borlänge var att designa och implementera en prototyp, i vilken klientapplikationer i Java och VB.NET integreras med varandra genom webservices i respektive programspråk. För analys och design har metoden UML använts. Slutsatsen av rapporten är att Java och VB.NET kan kommunicera med varandra genom webserviceteknik. Dock är integrationen mellan de två programspråken inte okomplicerad. Detta leder till slutsatsen att webservicetekniken måste standardiseras för att få ordentligt genomslag som teknik för systemintegration mellan olika programspråk.

Entreprenörskap i skolan : Gymnasielärares attityd och inställning till begreppen entreprenörskap och entreprenöriellt lärande.

Undersökningens avsikt var att vinna kunskap om hur gymnasielärare förhåller sig till lanseringen av begreppet entreprenörskap i skolan. Uppsatsen klarlägger och systematiserar hur lärare beskriver innehållet i begreppen entreprenörskap och entreprenöriellt lärande och fördjupar sig även i hur lärarna ser på upprinnelsen till begreppens lansering i den svenska skolan. Undersökningen gör även en analys av möjliga entreprenöriella undervisningsmetoder samt de olika undervisningsrelaterade problem som lärarna anser att dessa metoder kan ge upphov till. Åtta kvalitativa intervjuer genomförda på en gymnasieskola i norra Sverige utgör basen för undersökningen. Studien nyttjar en abduktiv förståelseansats vilket betyder att analysen av det empiriska materialet kännetecknades av en pendelrörelse mellan en induktiv ansats och en deduktiv ansats. I arbetets resultatdel slås bland annat fast att begreppet entreprenöriellt lärande av lärarna ses som ett verktyg för undervisning i entreprenörskap. Det framgår även som tydligt att entreprenörskap främst sätts i samband med företagande och/eller kreativitet. Begreppet entreprenöriellt lärande uppfattas i sin tur som mer diffust och mindre värdeladdat än begreppet entreprenörskap. De undervisningsmetoder som lärarna ansåg vara förknippade med entreprenörskap betonade främst antingen undervisningsstrategier/undervisningsinnehåll eller undervisningsstruktur/undervisningsform. Med utgångspunkt i intervjupersonernas svar var det möjligt att klargöra att entreprenörskap, utifrån ett skolperspektiv, inte bör ses som något nytt. Samtliga lärare i undersökning utgick från redan befintliga tillvägagångssätt när de beskrev metoder för entreprenöriell undervisning. I och med att lärarna uppfattade att svagare elever, som av olika anledningar ofta kan ha svårare att finna kreativitet och initiativförmåga, som de elever som har svårast med den typ av undervisning som lärarna sätter i samband med entreprenörskap, klargör uppsatsen även att det är svagare elever som får störst problem med entreprenörskapsundervisning. De problem som lärarna ansåg att entreprenöriell undervisning kan resultera i sträckte sig sammantaget från elevorienterade problem till lärar- och skolorienterade problem. Allt som allt uppfattar lärarna att det är partipolitiska beslut och en övergripande samhällsutveckling som legat till grund för lanserandet av entreprenörskap i den svenska skolan. Denna slutsats sätter uppsatsen i samband med övergripande samhällsteoretiska uppslag av Manuel Castells och Richard Florida.

Síntese e caracterização de poliacrilamidas modificadas para utilização na indústria do petróleo

Modified polyacrylamides with ≅ 0.2 mol % of N,N-dihexylacrylamide and hydrolysis degree from 0 to 25 % were synthesized by micellar copolymerization. The hydrophobic monomer was obtained by the reaction between acryloyl chloride and N,Ndihexylamine and characterized by infrared (IR) and proton nuclear magnetic resonance (1H NMR) spectroscopy. The polymer molecular structures were determined through 1H and 13C NMR spectroscopy and the polymers were studied in dilute and semi-dilute regimes by viscometry, rheometry, static light scattering and photon correlation spectroscopy, at the temperature range from 25 to 55 ºC. The data obtained by viscometry showed that the intrinsic viscosity from the hydrolyzed polymers is larger than the precursor polymers at the same ionic strength. The comparison between the charged polymers showed that the polymer with higher hydrolysis degree has a more compact structure in formation water (AFS). The increase of temperature led to an enhanced reduced viscosity to the polymers in Milli-Q water (AMQ), although, in brine, only the unhydrolyzed polymer had an increase in the reduced viscosity with the temperature, and the hydrolyzed derivatives had a decrease in the reduced viscosity. The static light scattering (SLS) analyses in salt solutions evidenced a decrease of weight-average molecular weight (⎯Mw) with the increase of the hydrolysis degree, due to the reduction of the thermodynamic interactions between polymer and solvent, which was evidenced by the decrease of the second virial coefficient (A2). The polymers showed more than one relaxation mode in solution, when analyzed by photon correlation spectroscopy, and these modes were attributed to isolated coils and aggregates of several sizes. The aggregation behavior depended strongly on the ionic strength, and also on the temperature, although in a lower extension. The polymers showed large aggregates in all studied conditions, however, their solutions did not displayed a good increase in water viscosity to be used in enhanced oil recovery (EOR) processes

Extruded vesicles of dioctadecyldimethylammonium bromide and chloride investigated by light scattering and cryogenic transmission electron microscopy

Combined dynamic and static light scattering (DLS, SLS) and cryogenic transmission electron microscopy (cryo-TEM) were used to investigate extruded cationic vesicles of dioctadecyldimethylammonium chloride and bromide (DODAX, X being Cl- or Br-). In salt-free dispersions the mean hydrodynamic diameter, D-h, and the weight average molecular weight, M-w, are larger for DODAB than for DODAC vesicles, and both D-h and M-w increase with the diameter (phi) of the extrusion filter. NaCl (NaBr) decreases (increases) the DODAB (DODAC) vesicle size, reflecting the general trend of DODAB to assemble as larger vesicles than DODAC. The polydispersity index is lower than 0.25, indicating the dispersions are rather polydisperse. Cryo-TEM micrographs show that the smaller vesicles are spherical while the larger ones are oblong or faceted, and the vesicle samples are fairly polydisperse in size and morphology. They also indicate that the vesicle size increases with phi and DODAB assembles as larger vesicles than DODAC. Lens-shaped vesicles were observed in the extruded preparations. Both light scattering and cryo-TEM indicate that the vesicle size is larger or smaller than phi when phi is smaller or larger than the optimal phi* approximate to 200 nm. (C) 2008 Elsevier B.V. All rights reserved.

Do all tannins have similar nutritional effects? A comparison of three Brazilian fodder legumes

Three tropical legumes, namely Leucaena leucocephala, Sesbania sesban and Cajanus cajan, were subjected to chemical analysis plus in vitro, in situ and in vivo evaluations. Three different assays were used to determine total tannins: adsorption to polyvinyl pyrrolidine (PVPP-tannins), radial diffusion (RD-tannins) and protein precipitation capacity (BSA-tannins). Total phenols, total tannins and condensed tannins were highest for Sesbania. RD-tannins were correlated with total phenols (r(2) = 0.93), PVPP-tannins (r(2) = 0.92) and condensed tannins (r(2) = 0.99). The protein precipitation capacity of Sesbania, Leucaena and Cajanus were 25.9, 6.13 and 4.05 mu g BSA/g DM, respectively.Gas production at 24h was negatively correlated with total phenols (r(2) = 0.99), PVPP-tannins (r(2) = 0.99) and condensed tannins (r(2) = 0.91). The RD-, PVPP-tannins and the response to polyethylene glycol (PEG) in the gas production assay appeared to be useful as a first screen for tannins.In situ degradability did not reflect any adverse effects of tannins. However, in vivo experiments showed that the apparent DM digestibility of Sesbania and Leucaena was lower than the basal diet. The apparent protein digestibility was lower for all legumes compared to the basal diet. Most treatments caused a negative nitrogen balance. The problems associated with browse feeding were not only related to tannin contents, other factors such as inherently poor digestibility and low energy intake may also have lead to the poor animal performance on these diets. We propose, given the limitations of current tannin assays, that it is not possible to predict beneficial or harmful nutritional effects from total tannin concentrations per se. (C) 2004 Elsevier B.V. All rights reserved.

Exotic species of freshwater decapod crustaceans in the state of São Paulo, Brazil: records and possible causes of their introduction

Based on recent surveys of the freshwater decapod fauna, distributional data of five exotic species of freshwater decapod crustaceans for the hydrographic basins of the state of São Paulo are presented, as part of a large initiative for a comprehensive survey of the state's biodiversity (BIOTA-FAPESP Program). These species are the North American crayfish Procambarus clarkii (Girard) (Cambaridae), the crab Dilocarcinus pagei Stimpson (Trichodactylidae) from the Amazon and Paraguay/lower Parana River Basins, and the palaemonid shrimps Macrobrachium rosenbergii (De Man), from the Indo-Pacific region, Macrobrachium amazonicum (Heller) and Macrobrachium jelskii (Miers), both from the Orinoco, Amazon and the Paraguay/lower Parana River Basins. Possible modes by which their introduction might have occurred are commented upon and potential consequences are discussed.

The effect of drying and urea treatment on nutritional and anti-nutritional components of browses collected during wet and dry seasons

Fibre, crude protein and tannin concentrations were measured in browse species from the semi-arid region of Northeast Brazil during the dry and wet seasons. The effects of oven-, sun- and shade-drying and of urea treatment were also determined. Crude protein (CP) content varied from 103 to 161 g/kg dry matter (DM) and the browses had similar CP content in the two seasons (during 2002) (102-161 and 107-153 g/kg DM in the wet and dry seasons, respectively). Total tannin concentrations ranged from 13 to 201 g/kg DM amongst the browses and were higher in the dry season. A 30-d treatment with urea reduced extractable tannins significantly (P < 0.05). The urea treatment was also most effective at reducing the in vitro effects of tannins compared to the other drying treatments. This was demonstrated by measuring the effect of polyethylene glycol (PEG) on gas production. Addition of PEG increased gas production of oven- (81.4%), sun- (78.5%) and shade-dried (76.7%) samples much more compared to urea treated samples (10.9%). (c) 2005 Elsevier B.V. All rights reserved.

Collagen membranes at immediate implants: a histomorphometric study in dogs

AimTo evaluate the influence of resorbable membranes on hard tissue alterations and osseointegration at implants placed into extraction sockets in a dog model.Material and methodsIn the mandibular premolar region, implants were installed immediately into the extraction sockets of six Labrador dogs. Collagen-resorbable membranes were placed at the test sites, while the control sites were left uncovered. Implants were intended to heal in a submerged mode. After 4 months of healing, the animals were sacrificed, and ground sections were obtained for histomorphometric evaluation.ResultsAfter 4 months of healing, a control implant was not integrated (n=5). Both at the test and at the control sites, bone resorption occurred. While the most coronal bone-to-implant contact was similar between the test and the control sites, the alveolar bone crest outline was maintained to a higher degree at the buccal aspect of the test sites (loss: 1.7 mm) compared with the control sites (loss: 2.2 mm).ConclusionsThe use of collagen-resorbable membranes at implants immediately placed into extraction sockets contributed to a partial (23%) preservation of the buccal outline of the alveolar process.To cite this article:Caneva M, Botticelli D, Salata LA, Souza SLS, Carvalho Cardoso L, Lang NP. Collagen membranes at immediate implants: a histomorphometric study in dogs.Clin. Oral Impl. Res. 21, 2010; 891-897.doi: 10.1111/j.1600-0501.2010.01946.x.

Magnesium-enriched hydroxyapatite at immediate implants: a histomorphometric study in dogs

AimTo evaluate the influence of magnesium-enriched hydroxyapatite (MHA) (SintLife (R)) on bone contour preservation and osseointegration at implants placed immediately into extraction sockets.Material and methodsIn the mandibular pre-molar region, implants were installed immediately into extraction sockets of six Labrador dogs. MHA was placed at test sites, while the control sites did not receive augmentation materials. Implants were intended to heal in a submerged mode. After 4 months of healing, the animals were sacrificed, and ground sections were obtained for histomorphometric evaluation.ResultsAfter 4 months of healing, one control implant was not integrated leaving n=5 test and control implants for evaluation. Both at the test and the control sites, bone resorption occurred. While the most coronal bone-to-implant contact was similar between test and control sites, the alveolar bony crest outline was maintained to a higher degree at the buccal aspect of the test sites (loss: 0.7 mm) compared with the control sites (loss: 1.2 mm), even though this difference did not reach statistical significance.ConclusionsThe use of MHA to fill the defect around implants placed into the alveolus immediately after tooth extraction did not contribute significantly to the maintenance of the contours of the buccal alveolar bone crest.To cite this article:Caneva M, Botticelli D, Stellini E, Souza SLS, Salata LA, Lang NP. Magnesium-enriched hydroxyapatite at immediate implants: a histomorphometric study in dogs.Clin. Oral Impl. Res. 22, 2011; 512-517doi: 10.1111/j.1600-0501.2010.02040.x.

Flap vs. "flapless" surgical approach at immediate implants: a histomorphometric study in dogs

AimTo compare the remodeling of the alveolar process at implants installed immediately into extraction sockets by applying a flap or a "flapless" surgical approach in a dog model.Material and methodsImplants were installed immediately into the distal alveoli of the second mandibular premolars of six Labrador dogs. In one side of the mandible, a full-thickness mucoperiosteal flap was elevated (control site), while contra-laterally, the mucosa was gently dislocated, but not elevated (test site) to disclose the alveolar crest. After 4 months of healing, the animals were sacrificed, ground sections were obtained and a histomorphometric analysis was performed.ResultsAfter 4 months of healing, all implants were integrated (n=6). Both at the test and at the control sites, bone resorption occurred with similar outcomes. The buccal bony crest resorption was 1.7 and 1.5 mm at the control and the test sites, respectively.Conclusions"Flapless" implant placement into extraction sockets did not result in the prevention of alveolar bone resorption and did not affect the dimensional changes of the alveolar process following tooth extraction when compared with the usual placement of implants raising mucoperiosteal flaps.To cite this article:Caneva M, Botticelli D, Salata LA, Souza SLS, Bressan E, Lang NP. Flap vs. "flapless" surgical approach at immediate implants: a histomorphometric study in dogs.Clin. Oral Impl. Res. 21, 2010; 1314-1319.doi: 10.1111/j.1600-0501.2009.01959.x.

Postural control under visual and proprioceptive perturbations during double and single limb stances: Insights for balance training

Single Limb Stance under visual and proprioceptive disturbances is largely used in clinical settings in order to improve balance in a wide range of functional disabilities. However, the proper role of vision and proprioception in SLS is not completely understood. The objectives of this study were to test the hypotheses that when ankle proprioception is perturbed, the role of vision in postural control increases according to the difficulty of the standing task. And to test the effect of vision during postural adaptation after withdrawal of the somesthetic perturbation during double and single limb stance. Eleven males were submitted to double (DLS) and single limb (SLS) stances under conditions of normal or reduced vision, both with normal and perturbed proprioception. Center of pressure parameters were analyzed across conditions. Vision had a main effect in SLS, whereas proprioception perturbation showed effects only during DLS. Baseline stability was promptly achieved independently of visual input after proprioception reintegration. In conclusion, the role of vision increases in SLS. After proprioception reintegration, vision does not affect postural recovery. Balance training programs must take that into account. © 2011 Elsevier Ltd.

Scaffolds de polihidroxibutirato construídos por prototipagem rápida funcionalizados com hidroxiapatita e peptídeo osteogênico

Com a evolução da engenharia tecidual novos materiais estão sendo estudados visando o tratamento de defeitos ósseos. O objetivo deste projeto foi preparar e caracterizar scaffolds a base de polihidroxibutirato (PHB), apatita e peptídeo osteogênico, osteogenic growth peptide (OGP), para aplicação em reparação óssea. Além disso, avaliar a liberação prolongada do peptídeo incorporado aos scaffolds na forma livre ou incorporado a lipossomas. Os scaffolds de PHB foram confeccionados por prototipagem rápida (PR) empregando a tecnologia Selective Laser Sintering (SLS). Posteriormente, a apatita foi incorporada in situ por meio de ciclos alternados de imersão em soluções de CaCl2 e Na2HPO4, respectivamente. Neste estudo foram selecionadas 2 marcações para o OGP, uma com 5,6-carboxifluoresceína (CF) e outra com triptofano (W), para análise de liberação prolongada. Os peptídeos foram incorporados ao sistema de liberação no momento de seu preparo. A caracterização por espalhamento de luz dos sistemas de liberação desenvolvidos mostrou que os peptídeos marcados com CF foram os melhores desenvolvidos. Portanto estes peptídeos foram adsorvidos nos scaffolds de PHB-CaP. Estudos in vitro foram realizados para avaliar o perfil de liberação do peptídeo OGP-CF do sistema de liberação controlada. A incorporação da apatita às matrizes de PHB foi confirmada por análises de microscopia eletrônica de varredura/ espectroscopia de energia dispersiva (MEV/EDS), espectroscopia na região do infravermelho (FTIR), absorção atômica, a difratometria de raios-X (DRX). Estas análises sugeriram que a principal fase precipitada foi -TCP. O sistema de liberação lipossoma/OGP-CF foi caracterizado pelas análises de dicroísmo circular e espalhamento de luz, que confirmaram a presença do peptídeo nas amostras. Após a análise da liberação, observou-se que o sistema PHB-CaP/OGP-CF obteve ...