Development of a warning system for wheat blast caused by Pyricularia grisea

Wheat (Triticum aestivum L.) blast caused by Pyricularia grisea is a new disease in Brazil and no resistant cultivars are available. The interactions between temperature and wetness durations have been used in many early warning systems. Hence, growth chamber experiments to assess the effect of different temperatures (10, 15, 20, 25, 30 and 35ºC) and the duration of spike-wetness (0, 5, 10, 15, 20, 25, 30, 35 and 40 hours) on the intensity of blast in cultivar BR23 were carried out. Each temperature formed an experiment and the duration of wetness the treatments. The highest blast intensity was observed at 30°C and increased as the duration of the wetting period increased while the lowest occurred at 25°C and 10 hours of spike wetness. Regardless of the temperature, no symptoms occurred when the wetting period was less than 10 hours but at 25°C and a 40 h wetting period blast intensity exceeded 85%. These variations in blast intensity as a function of temperature are explained by a generalized beta model and as a function of the duration of spike wetness by the Gompertz model. Disease intensity was modeled as a function of both temperature and the durations of spike wetness and the resulting equation provided a precise description of the response of P. grisea to temperatures and the durations of spike wetness. This model was used to construct tables that can be used to predict the intensity of P. grisea wheat blast based on the temperatures and the durations of wheat spike wetness obtained in the field.

In vivo sensitivity reduction of Puccinia triticina races, causal agent of wheat leaf rust, to DMI and QoI fungicides

Experiments were carried out to determine in vivo the IC50 and the IC90 for demethylation-inhibitor fungicides (DMIs, triazoles) and quinone outside inhibitors (QoIs, strobilurins) to the five most frequent races of Puccinia triticina in 2007 growing season in Southern Brazil. The tests were done in a greenhouse with wheat seedlings. DMI fungicides were tested at the concentrations, in mg/L, 0.0; 0.02; 0.2; 2.0; 20.0; 100.0 and 200.0, and QoIs at the concentrations 0.0; 0.0001; 0.001; 0.01; 0.1; 1 and 10.0 mg of active ingredient/L water. Fungicides were preventively applied at 24 hours before the inoculation of seedlings with the fungal spores. The effect of treatments was assessed based on the number of uredia/cm². The lowest IC50 (inhibitory concentration) for DMI fungicides determined for MCG-MN, sensitive race, ranged from 0.33 to 0.91 mg/L, while the highest values for MDP-MR, MDT-MR, MDK-MR, MFH-HT races, varied from 9.63 to 85.64 mg/L (suspected insensitivity). QoI fungicide presented an IC50 varying from 0.0018 to 0.14 mg/L. The sensitivity reduction factor for DMIs varied from 8.8 to 238.8, and for QoIs from 0.3 to 1.5 mg/L. Sensitivity reduction was confirmed for the races MDP-MR, MDT-MR, MDK-MR, MFH-HT to DMIs, as well as their sensitivity to QoI fungicides.

Obtenção de plantas de feijão-caupi resistentes ao Cowpea severe mosaic virus e ao Cowpea aphid-borne mosaic virus

Dentre os vírus que infectam o feijão-caupi (Vigna unguiculata L. Walp.) destacam-se, respectivamente, pela severidade e ampla ocorrência o Cowpea severe mosaic virus (CPSMV) e o Cowpea aphid-borne mosaic virus (CABMV). Portanto, objetivaram-se, no presente trabalho, obter e avaliar plantas de feijão-caupi com resistência ao CPSMV e ao CABMV, visando ao desenvolvimento de cultivares essencialmente derivadas e novas cultivares. Realizaram-se oito cruzamentos seguidos de retrocruzamentos, utilizando a linhagem TE 97-309G-9 e a cultivar Patativa como genitores resistentes, e as cultivares BR3-Tracuateua, BRS-Urubuquara, BRS-Novaera, BRS-Guariba e Pretinho como genitores suscetíveis. As gerações F2 e F2RC1 foram desafiadas quanto à resistência por meio de inoculação mecânica com isolados do CPSMV e do CABMV. Nas gerações F2RC1, além da resistência foram avaliados os caracteres: número de dias para o início da floração, comprimento das vagens, número de grãos. vagem-1, peso de cem grãos e produção de grãos.planta-1. Todos os indivíduos F2 e F2RC1 foram analisados pelo teste χ² e se ajustaram à frequência esperada de 15 plantas suscetíveis 1 planta resistente a ambos os vírus. As médias das plantas F2RC1 resistentes, de cada retrocruzamento, foram comparadas com a média do seu respectivo genitor recorrente pelo teste 't' e as médias dos retrocruzamentos foram comparadas pelo teste de Scott-Knott. Foi detectada variabilidade genética entre os retrocruzamentos para todos os caracteres. Todos os retrocruzamentos foram considerados promissores para produção de cultivares essencialmente derivadas resistentes ao CPSMV e ao CABMV e as plantas selecionadas possuem características que possibilitam a seleção de linhagens com grãos de bom padrão comercial e altamente produtivas.

Diagrammatic scale for the assessment of blast on wheat spikes

The correct quantification of blast caused by the fungus Magnaporthe oryzae on wheat (Triticum aestivum) spikes is an important component to understand the development of this disease aimed at its control. Visual quantification based on a diagrammatic scale can be a practical and efficient strategy that has already proven to be useful against several plant pathosystems, including diseases affecting wheat spikes like glume blotch and fusarium head blight. Spikes showing different disease severity values were collected from a wheat field with the aim of elaborating a diagrammatic scale to quantify blast severity on wheat spikes. The spikes were photographed and blast severity was determined by using resources of the software ImageJ. A diagrammatic scale was developed with the following disease severity values: 3.7, 7.5, 21.4, 30.5, 43.8, 57.3, 68.1, 86.0, and 100.0%. An asymptomatic spike was added to the scale. Scale validation was performed by eight people who estimated blast severity by using digitalized images of 40 wheat spikes. The precision and the accuracy of the evaluations varied according to the rater (0.82wheat spikes.

Weather requirements and rain forecast to time fungicide application for Fusarium head blight control in wheat

The aim of this study was to determine the minimum conditions of wetness duration and mean temperature required for Fusarium head blight infection in wheat. The weather model developed by Zoldan (2008) was tested in field experiments for two wheat cultivars grown in 2005 (five sowing dates) and 2006 (six sowing dates) in 10 m² plots with three replicates. The disease was assessed according to head incidence (HI), spikelet incidence (SI), and the interaction between these two methods was called head blight severity (HBS). Starting at the beginning of anthesis, air temperature and head wetness duration were daily recorded with an automatic weather station. With the combination of these two factors, a weather favorability table was built for the disease occurrence. Starting on the day of flowering beginning (1 - 5% fully exserted anthers), the sum of daily values for infection favorability (SDVIF) was calculated by means of a computer program, according to Zoldan (2008) table. The initial symptoms of the disease were observed at 3.7% spikelet incidence, corresponding to 2.6 SVDFI. The infection occurs in wheat due to rainfall which results in spike wetting of > 61.4 h duration. Rainfall events forecast can help time fungicide application to control FHB. The name of this alert system is proposed as UPF-scab alert.

Effect of the concentration of inoculum and tensoactive on the efficiency of Bipolaris sorokiniana infection in wheat leaves

Techniques that result in increased pathogen infection rates by employing reduced quantities of fungal spores with sparse sporulation have been developed. Experiments under controlled environment conditions were conducted to evaluate the effect of the density of Bipolaris sorokiniana conidia on the intensity of wheat helminthosporiosis. Using a selected inoculum density, the concentration of the tensoactive (Tween 20) that promoted maximum infection by the causal agent of the disease was determined. The density of lesions and the estimated severity of the disease were quantified. The selected inoculum density was 1.5 x 10(4) spores.mL-1 plus 480 µL tensoactive.L-1 water, resulting in a disease severity that allows selecting wheat cultivars resistant to B. sorokiniana.

Reaction of wheat cultivars and differential lines to Puccinia triticina races in detached leaves

The method of preserving detached wheat leaves in Petri dish was used for the inoculation and development of the fungus Puccinia triticina, the causal agent of wheat leaf rust. The reaction of 26 wheat cultivars was compared by using seedlings cultivated in pots (in vivo) and detached leaves (in vitro) inoculated with four physiological races of the pathogen. After inoculation, the material was kept in a growth chamber for 15 days. The reaction was evaluated on the 15th day after inoculation. Results for each race in the evaluated genotypes confirmed the efficiency of the detached leaf method in assessing the reaction of wheat cultivars.

Growth through internationalization of Russian SMEs in Finland

The study examines Russian SMEs motives, needs, prospects and constrains to enter Finland through Lappeenranta. Russian entrepreneurship is a young phenomenon in Finland. The present research becomes a first guide in understanding of Russian SMEs’ capabilities for establishing their subsidiaries in Finland. The extensive model of different theoretical approaches was created for evaluating Russian SMEs growth and internationalization opportunities. The findings of the research indicated that Russian growing companies chose the internationalization to continue their development. Many Finland’ positive conditions were evaluated as important for the Russian entrepreneurship. Finland was the first European country of the expansion to the European Union, for the Russian SMEs established the subsidiaries in Lappeenranta. Their motives for entering Finland were usually based on market and resource views. Generally, the Russian SMEs establish a new company in Finland only when they have sufficient capabilities and resources for internationalization. Entering Finland the Russian firms make better the allocation of their natural, financial and human resources.

Russian market entry decision for an e-business company, the case Ampparit Inc.

The aim of the study was to examine foreign operation methods and suggest the entry mode for the Russian E-business market. Ampparit Inc. was chosen as a case company, as it operates in the e-commerce B2B type of the business by providing Witpik - media monitoring service. The concept of foreign operation method was clarified with a specific focus on Russian market peculiarities and E-business. The main focuses of the present work were to figure out the most applicable entry mode for the Russian market in case of e-business company and factors affecting the decision about entry, including risks, barriers and other aspects.

Intellectual capital management in international and Russian software companies

The importance of the company’s intellectual capital (IC) increased during the last decades due to knowledge-based economy development. Despite the clear understanding of the IC importance, researchers agree on the fact that many difficulties in management of intangibles still exist from the both theoretical and practical points of view. The goal of the study is to conduct a comparison of IC management approaches used in international and Russian software companies. To carry out a proper comparison and identify similarities and differences, software firms are explored from the point of view of IC, and then be compared in the context of international and Russian sectors. At the end of the study, current IC management findings in international and Russian software companies are presented, and comparison of IC management is done. It was investigated from the comparison that international and Russian software companies have similarities and few principal differences in several IC management areas. The comparison of IC management approaches between international and Russian software companies provide helpful information to both, researchers and practitioners.

Innovation and Internationalisation in Russian Companies: Challenges and Opportunities for Open Innovation and Cooperation

Increasing globalisation and intensified cross-border cooperation, together with significant technological breakthroughs, create a fascinating gap for the research of the relationship between internationalisation and innovation on national, regional and company levels in Russia. The intensified international trade between countries and regions benefited from favourable institutional conditions, and facilitated the technology transfer and the development of innovations on the national level. This study approaches the same question from the company perspective; if certain companies are more innovative than other domestic companies, will they start internationalisation more easily or get involved in cooperation with international stakeholders? When companies operate in international markets, how do they obtain knowledge? Moreover, would this new knowledge from the foreign market help then to increase innovativeness, competitiveness and develop operations in domestic/local and foreign markets? Considering the role of foreign direct investments (FDI), the research in hand tries to find out the role of companies with FDI on the other players on the home market. Do foreigners bring new technology, innovation to the country? Is there spillover effect observed and how local companies can benefit from them? This dissertation studies the internationalisation and innovation in Russian companies, both from the outward internationalisation and inward internationalisation perspectives. Russian companies developed quickly during the transition period, after the dissolution of the Soviet Union. The common background of these companies, the effects of the change of ownership, and some managerial difficulties make them more sensitive to competitions issues, and in this context, the opportunities brought by the developing innovations are seen in companies and on the governmental level.