Remoção de bezerros e/ou ECG na taxa de prenhez de vacas Nelore paridas submetidas à IATF e seus eleitos no desempenho das crias

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo in vitro do comportamento de facetas confeccionadas com artglass e targis quando submetidas à inserção e remoção de grampos circunferenciais em cromo-cobalto

Aiming to investigate in vitro the behavior of esthetic veneers placed in crows and made of the laboratory resins Artglass and Targis when submitted to insertion and removal of circunferential cobalt-chromium clasps, 24 veneer crowns were made (twelve with Artglass (Heraeus Kulzer) and twelve with Targis (Ivoclar Vivadent)), as well as the respective cobalt-chromium clasps. The crowns were then submitted to five thousand cycles of clasps insertion and removal, using a proper device. Using the verification of the force necessary to remove the clasps over the crowns during the experiment, the clasps and crowns mass variation, and the macroscopic inspection of the veneers, one may conclude that the veneers did not show a significant variation of the force required to remove the clasps over the crowns; they show a little amount of abrasion, possible to detect using a visual inspection and they show a little and variable amount of mass loss, less for that made with Artglass (average of 0,002g) and greater for that made with Targis (average of 0,006g)

Comparação da infiltração marginal de restaurações adesivas empregando instrumento rotativo ou um sistema químico-mecânico na remoção do tecido cariado

Pós-graduação em Odontologia Restauradora - ICT

Remoção do ácido mefenâmico em água utilizando carvão ativado em pó, lama vermelha e oxidação com cloro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Remoção da adesividade em ovos de Pseudoplatystoma fasciatum

Pós-graduação em Aquicultura - FCAV

Eficiência de detergentes e EDTA na remoção da smear layer de superfícies radiculares submetidas a raspagem e aplainamento: análise através da microscopia eletrônica de varredura

A remoção da smear layer é um procedimento importante para a regeneração periodontal e para o tratamento da sensibilidade dentinária. Diversos tratamentos tem sido realizados para sua remoção, porém, mostrando resultados conflitantes ou insatisfatórios. No presente estudo nos propomos a analisar através do microscópio eletrônico de varredura a eficiência dos detergentes: lauril sulfato de sódio, Plax e de mamona assim como o EDTA 24% na remoção da smear layer. Todos os produtos testados foram aplicados com bolinha de algodão, renovada a cada 30 segundos, a qual era esfregada na superfície radicular por diferentes períodos. As fotomicrografias foram analisadas através da aplicação de um índice de remoção da smear layer por três examinadores calibrados e os resultados analisados estatisticamente. De acordo com nossos resultados pudemos chegar as seguintes conclusões: 1- a instrumentação com curetas de Gracey provocou a formação da smear layer; 2- o detergente lauril sulfato de sódio não removeu a smear layer, tendo sido o pior resultado entre os detergentes testados; 3- Os detergentes Plax e de mamona mostraram resultados semelhantes entre si e superiores ao controle negativo e ao lauril sulfato de sódio, porém, não removeram a smear layer satisfatoriamente; 4- O EDTA 24% neutro mostrou ser eficiente para a remoção da smear layer.

Avaliação da toxicidade de corantes azóicos por Allium cepa e estudo da capacidade de remoção destes compostos em solução por Saccharomyces cerevisiae

Não disponível

Remoção de cromo de resíduos de curtumes por argilitos da formação Corumbataí - SP

The tanning wastes are characterized to be significant sources of pollution in the hydrosphere when non adjusted or disposed adequated form. That happens because this industry type uses the chromium to tan hides, and this element is present in discharges concentrations in final wastes, characterizing this waste type as dangerous, according to the Associação Brasileira de Normas Técnicas, através da Norma Brasileira 10.004 de 2004. Due to this, the research proposes a form to reduction chromium of the tanning wastes through the process of adsorption. For that were used mining-wastes of Corumbataí Formation clays, material commonly used in the production of ceramic products in Rio Claro (SP). They were accomplished laboratory essays that involved the preparation of different clays pulps and subsequent mixture of these with the tanning wastes, maintaining them under different mixing times and adsorption contacts. After the separation of the mixtures, the leached were chemically analyzed and it was seen the efficiency of chromium reduction and your relationship with the variation of different times of contact clays/wastes and different grain sizes used in the pulps preparation.

Remoção de matéria orgânica e nitrogênio de efluentes provenientes de abatedouros de bovinos por meio de reator aeróbio operando em bateladas sequenciais com adição de coagulante químico

The volume of liquid effluent generated in cattle slaughterhouses is quite high and cannot be released untreated in water bodies due to its high pollution load of predominantly organic origin. To minimize the environmental impacts of its industrial wastewater and meet the local environmental legislation, abattoirs shall make the treatment of these effluents. The present work aims to develop the study of a reactor by sequential batch pilot scale, in order to optimize their performance in treating wastewater from a cattle slaughterhouse. The treatment system used was developed and installed in the Laboratory of Wastewater Treatment, in Faculty of Science and Technology UNESP, Presidente Prudente campus. The procedure used followed the operation of sequential batch reactors, in which all processes and treatment operations occurring sequentially in a single unit, by establishing specific operating cycles, which comprise the following separated phases: aerobic reaction, anoxic reaction, sedimentation and emptying. Aiming to improve the quality of treatment was planned the addition of coagulant Poly Aluminum Chloride (PAC) in the reactor, by determining their optimal dosage by Jar-test trials. Were prepared four steps with specific operating cycles: step one or acclimatization (10 hour of aeration, one hour and 30 minutes of sedimentation and 30 minutes for exchanging the effluent); step 2 (6 hours of aeration or aerobic phase, 4 hours and 45 minutes of stirring or anoxic phase and 1 hour and 15 minutes for sedimentation and exchange effluent); step 3 (2 hours and 30 minutes of aeration, 8 hours and 15 minutes of stirring and 1 hour and 15 minutes for sedimentation and exchange) and step 4 (2 hours of aeration, 8 hours and 45 minutes of stirring and 1 hour and 15 minutes for sedimentation and exchange)... (Complete abstract click electronic access below)

Estudo de biossorção e testes de imobilização usando Luffa cylindrica como adsorvente e Saccharomyces cerevisiae como agente imobilizado visando analisar a capacidade de remoção de corantes azóicos em solução

Não disponível

Uso das técnicas de difusão em filmes finos por gradiente de concentração (DGT) para avaliação de metais disponibilizados em passivos de mineração de Urânio

The objective of this work is to use the technique of diffusion by concentration gradient films (DGT) for evaluation of dissolved urano in hydro bodies. For this we chose this work as a systems investigation of water bodies in the region of Poços de Caldas, state of Minas Gerais, because, there is a large amount of mining of uranila. The technique to be used to evaluate the potential for dissolved metals analysis involves the use of passive samplers with application in in situ. This allows detection with excellent sensitivity and selectivity allowing the determination of the labile fraction of dissolved metals

Determinação de manganêsem águas no entorno de minerações de urânio

The studies of this work aimed to determine the labile fractions of manganese (Mn) in natural and drainage water samples collected around the Osamu Utsumi uranium mine, located in the municipality of Caldas, south-central region of Poços de Caldas- MG, using the technique of diffusion gradient in thin films (DGT). The DGT devices were mounted with Chelex-100 resin, polyacrylamide-agarose hydrogel (conventional porosity) and cellulose acetate membrane. The device were deployed up to 48 hours in six water samples collected from different areas around the uranium mine (075, 076, 022-E, 025-E, 014, and 041). The DGT devices immersed in each sample were gradually removed after 4, 8, 12, 24 and 48 hours. The pH of the samples ranged from 3.0 to 10.5, which influenced the lability and the sampling of the analyte by the Chelex-100 resin. The results showed a linear relationship between accumulated mass and sampling time (immersion curve) for samples 014 and 025-E (pH between 6 and 8) suggesting the ability of the DGT technique for sampling the analyte. The results obtained for samples 075 and 076 (pH<5) and samples 041 and 022-E (pH around 10) were characterized by nonlinear relationships. The values obtained by DGT were compared with Solid Phase Extraction (SPE) technique using Chelex-100. For samples 014 and 025-E, there was a good agreement between the results obtained by both techniques

Determinação de complexos de urânio em solo usando a técnica de difusão em filmes finos por gradiente de concentração (DGT)

This paper proposes to assess the lability of complexes of uranium in soil using the technique of Diffusion in Thin Films by concentration gradients (DGT) in the vicinity the Osamu Utsumi mine, located in the municipality of Caldas - MG. The technique is based on the 1ª Fick Law, where metal complexes diffuse through a gel, which in turn is adsorbed on a resin. The metals adsorbed are recovered by an analytical technique and quantified by optical emission spectrometer with plasma inductively coupled (ICP-OES) or mass spectrometry with inductively coupled plasma (ICP-MS)

Efeito da adição de inulina no crescimento, resistência gastrintestinal e capacidade de remoção de colesterol de Lactobacillus helveticus 416 e Enterococcus faecium CRL 183

O objetivo do presente estudo foi verificar o efeito da adição de um prebiótico nas características de crescimento, resistência às condições do trato gastrintestinal e remoção de colesterol in vitro, das cepas de Enterococcus faecium CRL183 e Lactobacillus helveticus 416. A fonte de prebiótico foi composta por Inulina GR – Orafti, sendo testadas as seguintes concentrações: 1,0%, 2,0%, 3,0%; 4,0%; 5,0% e 6,0% p/v). Para a avaliação da resistência às condições do trato gastrintestinal, os microrganismos foram colocados em contato com um fluido gástrico simulado por 2 horas (9g/L de NaCl, 3g/L de pepsina, pH 1,8) e com um fluido intestinal simulado por 3 horas (0,9g/L de pancreatina, 12,5g/L de bicarbonato de sódio e 6,0 g/L de Oxgall). Após o período de contato com os fluidos, foram realizadas diluições seriais e plaqueamento em meios específicos. No estudo de redução de colesterol, meios de cultura contendo inulina e colesterol (1%) foram inoculados com as cepas probióticas e incubados em anaerobiose a 37°C/24h. A capacidade de redução do colesterol foi determinada pela diferença entre a concentração de colesterol adicionada ao meio de cultura e a de colesterol residual. Os resultados foram submetidos à análise de variância e teste de médias de Tukey (p≤0,05). A adição de inulina não resultou em alteração no ciclo logarítmico de crescimento dos microrganismos. Porém, quando os dados foram submetidos à análise estatística, constatou-se que a adição de 1% a 4% de inulina inibiu o crescimento de Lactobacillus helveticus 416, sendo que para as concentrações de 5% a 6% estas alterações não foram perceptíveis. A cepa de Enterococcus faecium CRL 183 apresentou crescimento superior na presença de 2% e 4% de inulina. Após o contato com o fluido gástrico simulado, observou-se redução de 1 ciclo logarítmico no crescimento da cepa... (Resumo completo, clicar acesso eletrônico abaixo)

Remoção de N-amoniacal em baixas concentrações de oxigênio dissolvido a partir do efluente de frigorífico bovino

This work aimed to develop a biological system for removal of ammonia nitrogen operating at low concentrations of dissolved oxygen. Thus, a biological upflow vertical reactor was built, in which the affluent pass through the support media until the top. Sludge from an anaerobic stabilization pond of a slaughterhouse unit in the city of Presidente Prudente - SP was used as inoculum. Initially the system operated in batch and afterwards in a continuous flow with different HRT. For feeding the reactor, an initial phases was adopted a synthetic culture media, described by Martins (2007), in order to establish the ideal conditions for the development of Anammox bacteria and subsequently, submitted to the system a slugde effluent of slaughterhouse. The results showed significant removal efficiency of N-NH4+, especially in the phase without recirculation of culture media, with an average of 71% removal, with the proportion of removal of N-NH4 +:N-NO2- average 1: 1,69. For the period of operation with effluent from the slaughterhouse, were not obtained satisfactory results, without confirmation of the proliferation of Anammox bacteria in the system, due to the high presences of organic matter in the same confirmed by high concentrations of COD