984 resultados para Reactive blue 4
Resumo:
Copper doped methylene blue sensitized poly(vinyl alcohol) (MBPVA)–acrylamide films were fabricated to improve the storage life of recorded gratings. The films were fabricated using gravity settling method and the copper chloride concentration was optimized as 3:18 10 3 mol/l for a dye concentration of 6:2 10 4 mol/l. The gratings recorded on the optimized film constitution could be stored for months with stable diffraction efficiency (24%) without any chemical or thermal fixing techniques. The resolution of the material is found to be unaffected with the addition of copper chloride.
Resumo:
Polymer materials find application in optical storage technology, namely in the development of high information density and fast access type memories. A new polymer blend of methylene blue sensitized polyvinyl alcohol (PVA) and polyacrylic acid (PAA) in methanol is prepared and characterized and its comparison with methylene blue sensitized PVA in methanol and complexed methylene blue sensitized polyvinyl chloride (CMBPVC) is presented. The optical absorption spectra of the thin films of these polymers showed a strong and broad absorption region at 670-650 nm, matching the wavelength of the laser used. A very slow recovery of the dye on irradiation was observed when a 7:3 blend of polyvinyl alcohol/polyacrylic acid at a pHof 3.8 and a sensitizer concentration of 4.67 10 5 g/ml were used. A diffraction efficiency of up to 20% was observed for the MBPVA/alcohol system and an energetic sensitivity of 2000 mJ/cm2 was obtained in the photosensitive films with a spatial frequency of 588 lines/mm.
Resumo:
Copper doped methylene blue sensitized poly(vinyl alcohol) (MBPVA)–acrylamide films were fabricated to improve the storage life of recorded gratings. The films were fabricated using gravity settling method and the copper chloride concentration was optimized as 3:18 10 3 mol/l for a dye concentration of 6:2 10 4 mol/l. The gratings recorded on the optimized film constitution could be stored for months with stable diffraction efficiency (24%) without any chemical or thermal fixing techniques. The resolution of the material is found to be unaffected with the addition of copper chloride.
Resumo:
Polymer materials find application in optical storage technology, namely in the development of high information density and fast access type memories. A new polymer blend of methylene blue sensitized polyvinyl alcohol (PVA) and polyacrylic acid (PAA) in methanol is prepared and characterized and its comparison with methylene blue sensitized PVA in methanol and complexed methylene blue sensitized polyvinyl chloride (CMBPVC) is presented. The optical absorption spectra of the thin films of these polymers showed a strong and broad absorption region at 670-650 nm, matching the wavelength of the laser used. A very slow recovery of the dye on irradiation was observed when a 7:3 blend of polyvinyl alcohol/polyacrylic acid at a pHof 3.8 and a sensitizer concentration of 4.67 10 5 g/ml were used. A diffraction efficiency of up to 20% was observed for the MBPVA/alcohol system and an energetic sensitivity of 2000 mJ/cm2 was obtained in the photosensitive films with a spatial frequency of 588 lines/mm.
Resumo:
Significant results of our experimental investigations on the dependence of pH on real time transmission characteristics on recording media fabricated by doping PVC with complexed methylene blue are presented. The optimum pH value for faster bleaching was found to be 4 . 5. In typical applications, the illumination from one side, normal to the surface of this material, initiates a chemical sequence that records the incident light pattern in the polymer. Thus direct imaging can be successfully done on this sample. The recorded letters were very legible with good contrast and no scattering centres. Diffraction efficiency measurements were also carried out on this material.
Resumo:
A novel fixed frequency beam scanning microstrip leaky wave antenna is reported. The beam scanning at fixed frequency is achieved by reactive loading. Simulation and measured results shows frequency scanability of 80° as well as fixed frequency beam steering of 68° over the −10 dB impedance band of 4.56–5.06 GHz.
Resumo:
The thesis entitled ‘Studies on the Solvent Dependence in the Reaction of a Few (Anthracen-9-yl)methylamines and Sulfanes with Reactive Acetylenes’ is divided into six chapters. ln Chapter l a general survey of electron transfer reactions, Diels-Alder reactions and Michael-type additions is presented. A detailed discussion on the synthesis of several (anthracen-9-yl)methylamines is presented in Chapter 2. In Chapter 3, results of preliminary photophysical studies on a few (anthracen-9yl) methylamines are compiled. A detailed discussion on extensive examination of dependence in the reaction of (anthracen-9-yl)methylamines with reactive acetylenes is presented Chapter 4. Details on the synthesis and reaction of a few (anthracen-9-yl)methylsulfanes with DMAD are described in Chapter 5.
Resumo:
Spiro-starburst-structures with symmetric globular structures in forms of first and second generations that readily form stable amorphous glasses have been synthesized and then characterised in this work. During the synthesis of these materials, possibilities of the extension of the chains of the phenyl rings in 2,2’,7 and 7’-positions of the central core of the spirobifluorene as well as the 2’,7 and 7’-positions of the terminal spirobifluorene units of the spiro-starburst-structures have been investigated so that solubilities and morphologies of the compounds are not negatively influenced. Their morphological properties have been explored by recording their decomposition temperature and glass transition temperature. These compounds possessing two perpendicular arrangement of the two molecular halves show high glass transition temperature (Tg), which is one of the most important parameter indicating the stability of the amorphous state of the material for optoelectronic devices like organic light emitting diodes. Within the species of second generation compounds, for example, 4-spiro3 shows the highest Tg (330 °C) and the highest branching degree. When one [4B(SBF)SBF-SBF 84] or two [4SBFSBF-SBF 79] terminal spirobifluorene units are removed, the Tg decreases to 318 °C and 307 °C respectively. Photo absorption and fluorescence spectra and cyclic voltammetry measurements are taken in account to characterize the optoelectronic properties of the compounds. Spiro-starburst-structures emit radiation in the blue region of the visible spectrum. The peak maxima of absorption and emission spectra are observed to be at higher wavelength in the molecules with longer chromophore chains than in the molecules with shorter chromophore chains. Excitation spectra are monitored with their emission peak maxima. The increasing absorbing species in molecule leads to increasing molar extinction coefficient. In the case of 4B(TP)SBF-SBF 53 and 4B(SBF)SBF-SBF 84, the greater values of the molar extinction coefficients (43*104 and 44*104 L mol-1 cm-1 respectively) are the evidences of the presence of four times octiphenyl conjugation rings and eight times terminal fluorene units respectively. The optical properties of solid states of these compounds in the form of thin film indicate that the intermolecular interaction and aggregation of individual molecules in neat amorphous films are effectively hindered by their sterically demanding structures. Accordingly, in solid state, they behave like isolated molecules in highly dilute solution. Cyclic voltammetry measurements of these compounds show electrochemically reversibility and stability. Furthermore, the zeolitic nature (host-guest) of the molecular sieve of the synthesized spiro-starburst-structures has been analysed by thermogravimetric analysis method.
Resumo:
Ziel der vorliegenden Arbeit war es, einen Beitrag zur Resistenzforschung bei Tomaten gegenüber P. infestans zu leisten, um erste Grundlagen für eine mögliche Züchtungsstrategie auf Basis unterschiedlicher quantitativer Resistenzen zu erarbeiten. Hierzu wurde untersucht, inwieweit unterschiedliche qualitative und quantitative Resistenzen bei Tomatenblättern und -früchten vorliegen, und ob hierfür verantwortliche Mechanismen identifiziert werden können. Zudem wurde untersucht, ob isolatspezifische quantitative Resistenzen identifiziert werden können. Zu diesem Zweck wurde mit einer erweiterten Clusteranalyse, basierend auf einer modifizierten Sanghvi-T2 Distanz, ein statistisches Verfahren entwickelt, welches die Identifikation von quantitativen, isolatspezifischen Resistenzen unter der Berücksichtigung der Variabilität ermöglicht. Des weiteren wurde geprüft, inwieweit zwischen den Resistenzausprägungen auf dem Blatt und den Resistenzausprägungen auf der Frucht ein Zusammenhang besteht und inwieweit die im Labor beobachteten Resistenzen unter Freilandbedingungen eine Rolle spielen. Im Labortest wurde die qualitative und quantitative Blattresistenz von 109 Akzessionen aus elf Lycopersicon und Solanum Arten gegenüber zwölf unterschiedlich aggressiven und teilweise auch unterschiedlich virulenten P. infestans Isolaten untersucht (Kap. 3). Die Früchte von 38 Tomatensorten wurden auf ihre Resistenz gegenüber drei P. infestans Isolaten geprüft. Zusätzlich wurde der Einfluss der Fruchtnachreife auf die Resistenzeigenschaften der Tomatenfrüchte gegenüber P. infestans analysiert (Kap. 4). Insgesamt 40 Sorten wurden auch unter Feldbedingungen auf Blatt- und Fruchtbefall untersucht (Kap. 5). Die frühen Stadien der Infektion von Tomatenblättern mit P. infestans Sporangien wurden mikroskopisch bei acht Tomatensorten mit unterschiedlichen quantitativen Reaktionsprofilen und drei Isolaten untersucht (Kap. 6). Hierzu wurden die Entwicklungsstadien von P. infestans Sporangien nach 24h, 48h und 60h nach der Inokulation auf und im Blatt mit der Calcofluor und der KOH - Anilin Blau Färbung sichtbar gemacht. Das Auftreten und die Lokalisation von H2O2 im Blatt nach 48h und 60h nach der Inokulation in Reaktion auf die Infektion wurde mithilfe einer DAB (3,3′ - Diaminobenzidine) Färbung untersucht. Es wurden einige, z.T. auch wahrscheinlich neue, qualitative Blattresistenzen gegenüber P. infestans gefunden, jedoch war keine der 109 Akzessionen vollständig resistent gegenüber allen Isolaten. Für die quantitative Resistenz von Blättern lagen in vielen Fällen isolatspezifische Unterschiede vor. Die Sorte x Isolat Interaktionen konnten mit Hilfe der erweiterten Clusteranalyse erfolgreich analysiert werden und die Akzessionen in Gruppen mit unterschiedlichen quantitativen Resistenzprofilen bzgl. der Interaktion mit den Isolaten und des Resistenzniveaus eingeteilt werden. Für die Fruchtresistenz konnten keine qualitativen Resistenzen gegenüber den drei getesteten Isolaten gefunden werden. Im Gegensatz dazu unterschieden sich die Tomatensorten in ihrer quantitativen Resistenz und Sorten und Isolate interagierten signifikant. Auch für die Fruchtresistenz konnten Gruppen mit unterschiedlichen quantitativen Reaktionsprofilen gebildet werden. Insgesamt nimmt die Anfälligkeit von Tomatenfrüchten mit zunehmender Reife kontinuierlich und signifikant ab. Unter Laborbedingungen korrelierten nur die Sporulationskapazität der Früchte und der prozentuale Blattbefall. Im Feldversuch über zwei Jahre und mit bis zu 40 Tomatensorten war der Zusammenhang hoch signifikant, jedoch asymptotisch, d.h. bereits bei sehr geringem Blattbefall war der Fruchtbefall sehr hoch. Bei den Tomatenherkünften, die sowohl im Labor als auch im Feld auf ihre Anfälligkeit getestet wurden, erschienen die Blattanfälligkeiten ähnlich, während kein klarer Zusammenhang zwischen der Fruchtanfälligkeit im Feld und im Labor bestand. Die Entwicklung von P. infestans auf der Blattoberfläche war unabhängig von der Sorte. Sowohl beim Eindringen und der Etablierung von P. infestans ins Blatt als auch bei der damit verbunden H2O2 Aktivität im Wirt wurden deutliche isolat- und sortenspezifische Effekte gefunden, die aber nur zum Teil mit den quantitativen Unterschieden der Blattresistenz korrespondierten. Sorten, die bei hoher Resistenz unterschiedliche Reaktionsprofile aufweisen, sind grundsätzlich interessante Kreuzungspartner, um die quantitative Resistenz gegenüber P. infestans zu verbessern. Hier sind vor allem Sorten, die sich auch in ihrer H2O2 Aktivität unterscheiden von Interesse.
Resumo:
The Upper Blue Nile River Basin (UBNRB) located in the western part of Ethiopia, between 7° 45’ and 12° 45’N and 34° 05’ and 39° 45’E has a total area of 174962 km2 . More than 80% of the population in the basin is engaged in agricultural activities. Because of the particularly dry climate in the basin, likewise to most other regions of Ethiopia, the agricultural productivity depends to a very large extent on the occurrence of the seasonal rains. This situation makes agriculture highly vulnerable to the impact of potential climate hazards which are about to inflict Africa as a whole and Ethiopia in particular. To analyze these possible impacts of future climate change on the water resources in the UBNRB, in the first part of the thesis climate projection for precipitation, minimum and maximum temperatures in the basin, using downscaled predictors from three GCMs (ECHAM5, GFDL21 and CSIRO-MK3) under SRES scenarios A1B and A2 have been carried out. The two statistical downscaling models used are SDSM and LARS-WG, whereby SDSM is used to downscale ECHAM5-predictors alone and LARS-WG is applied in both mono-model mode with predictors from ECHAM5 and in multi-model mode with combined predictors from ECHAM5, GFDL21 and CSIRO-MK3. For the calibration/validation of the downscaled models, observed as well as NCEP climate data in the 1970 - 2000 reference period is used. The future projections are made for two time periods; 2046-2065 (2050s) and 2081-2100 (2090s). For the 2050s future time period the downscaled climate predictions indicate rise of 0.6°C to 2.7°C for the seasonal maximum temperatures Tmax, and of 0.5°C to 2.44°C for the minimum temperatures Tmin. Similarly, during the 2090s the seasonal Tmax increases by 0.9°C to 4.63°C and Tmin by 1°C to 4.6°C, whereby these increases are generally higher for the A2 than for the A1B scenario. For most sub-basins of the UBNRB, the predicted changes of Tmin are larger than those of Tmax. Meanwhile, for the precipitation, both downscaling tools predict large changes which, depending on the GCM employed, are such that the spring and summer seasons will be experiencing decreases between -36% to 1% and the autumn and winter seasons an increase of -8% to 126% for the two future time periods, regardless of the SRES scenario used. In the second part of the thesis the semi-distributed, physically based hydrologic model, SWAT (Soil Water Assessment Tool), is used to evaluate the impacts of the above-predicted future climate change on the hydrology and water resources of the UBNRB. Hereby the downscaled future predictors are used as input in the SWAT model to predict streamflow of the Upper Blue Nile as well as other relevant water resources parameter in the basin. Calibration and validation of the streamflow model is done again on 1970-2000 measured discharge at the outlet gage station Eldiem, whereby the most sensitive out the numerous “tuneable” calibration parameters in SWAT have been selected by means of a sophisticated sensitivity analysis. Consequently, a good calibration/validation model performance with a high NSE-coefficient of 0.89 is obtained. The results of the future simulations of streamflow in the basin, using both SDSM- and LARS-WG downscaled output in SWAT reveal a decline of -10% to -61% of the future Blue Nile streamflow, And, expectedly, these obviously adverse effects on the future UBNRB-water availibiliy are more exacerbated for the 2090’s than for the 2050’s, regardless of the SRES.
Resumo:
High aspect ratio polymeric micro-patterns are ubiquitous in many fields ranging from sensors, actuators, optics, fluidics and medical. Second generation PDMS molds are replicated against first generation silicon molds created by deep reactive ion etching. In order to ensure successful demolding, the silicon molds are coated with a thin layer of C[subscript 4]F[subscript 8] plasma polymer to reduce the adhesion force. Peel force and demolding status are used to determine if delamination is successful. Response surface method is employed to provide insights on how changes in coil power, passivating time and gas flow conditions affect plasma polymerization of C[subscript 4]F[subscript 8].
Resumo:
La Ciencia Política siempre ha buscado profundizar en el fenómeno del poder y sus causas. Las teorías han cambiado conforme a las circunstancias sociales a lo largo de la historia; no obstante, en la actualidad las dinámicas de comunicación facilitadas por elementos tecnológicos han generado coyunturas sin antecedentes como la ocurrida en Colombia el 4 de febrero de 2008 “Un Millón de voces contra las FARC” La generalización en el uso de Internet y –sobre todo- las redes sociales ha producido un acelerado nivel de activismo debido a la facilidad de cooperación y coordinación que se deriva de estructuras en red. Es sano pensar en una reevaluación de la teoría tradicional del poder vertical y traer al campo teórico nuevos elementos que generen herramientas de análisis sobre comunicación, poder horizontal, activismo y oportunidades políticas. El nacimiento de lo que algunos llaman “sociedad informacional” es lo que permitirá describir el concepto de “noopolitik”. Las que otrora eran movilizaciones políticas costosas y exigentes en recursos de coordinación y tiempo han venido siendo reemplazadas por explosiones de activismo catalizadas por un sentimiento común que han sabido servirse de las ventajas tecnológicas para lograr sus objetivos. Bien habla de ello el caso de estudio de esta investigación al ser la movilización más grande registrada, con más de 12 millones de personas alrededor del mundo y con el uso protagónico de redes sociales. El valor de la información –y por supuesto su difusión-, es ahora uno de los principales asuntos de la Ciencia Política moderna.
Resumo:
The kinetics of uptake of gaseous N2O5 on submicron aerosols containing NaCl and natural sea salt have been investigated in a flow reactor as a function of relative humidity (RH) in the range 30-80% at 295±2K and a total pressure of 1bar. The measured uptake coefficients, γ, were larger on the aerosols containing sea salt compared to those of pure NaCl, and in both cases increased with increasing RH. These observations are explained in terms of the variation in the size of the salt droplets, which leads to a limitation in the uptake rate into small particles. After correction for this effect the uptake coefficients are independent of relative humidity, and agree with those measured previously on larger droplets. A value of γ=0.025 is recommended for the reactive uptake coefficient for N2O5 on deliquesced sea salt droplets at 298K and RH>40%.
Resumo:
New Mo(II) diimine derivatives of [Mo(q (3)allyl)X(CO)(2)(CH3CN)(2)] (allyl = C3H5 and C5H5O; X = Cl, Br) were prepared, and [MO(eta(3)-C3H5)Cl(CO)(2)(BIAN)] (BIAN = 1,4-(4-chloro)phenyl-2,3-naphthalene-diazabutadiene) (7) was structurally characterized by single-crystal X-ray diffraction. This complex adopted an equatorial-axial arrangement of the bidentate ligand (axial isomer), in contrast with the precursors, found as the equatorial isomer in the solid and fluxional in solution. The new complexes of the type [Mo(eta(3)-allyl)X(CO)(2)(N-N)l (N-N is a bidentate chelating dinitrogen ligand) were tested for the catalytic epoxidation of cyclooctene using tert-butyl hydroperoxide as oxidant. All catalytic systems were 100% selective toward epoxide formation. While their turnover frequencies paralleled those of related Mo(eta) carbonyl compounds or Mo(VI) compounds bearing similar N-donor ligands, they exhibited similar olefin conversions in consecutive catalytic runs. The acetonitrile precursors were generally more active than the diimine complexes, and the chloro derivatives more active than the bromo ones. Combined vibrational and NMR spectroscopy and computational studies (DFT) were used to investigate the nature of the molybdenum species formed in the catalytic system with [Mo(eta(3)-C3H5)Cl(CO)(2){1,4-(2,6-dimethyl)phenyl-2.3-dimethyldiazabuta diene}] (4) and to propose that the resulting species may be dimeric bearing oxide bridges.
Resumo:
Complement-mediated inflammation exacerbates the tissue injury of ischaemic necrosis in heart attacks and strokes, the most common causes of death in developed countries. Large infarct size increases immediate morbidity and mortality and, in survivors of the acute event, larger non-functional scars adversely affect long-term prognosis. There is thus an important unmet medical need for new cardioprotective and neuroprotective treatments. We have previously shown that human C-reactive protein (CRP), the classical acute-phase protein that binds to ligands exposed in damaged tissue and then activates complement(1), increases myocardial and cerebral infarct size in rats subjected to coronary or cerebral artery ligation, respectively(2,3). Rat CRP does not activate rat complement, whereas human CRP activates both rat and human complement(4). Administration of human CRP to rats is thus an excellent model for the actions of endogenous human CRP2,3. Here we report the design, synthesis and efficacy of 1,6-bis(phosphocholine)-hexane as a specific small-molecule inhibitor of CRP. Five molecules of this palindromic compound are bound by two pentameric CRP molecules, crosslinking and occluding the ligand-binding B-face of CRP and blocking its functions. Administration of 1,6-bis(phosphocholine)-hexane to rats undergoing acute myocardial infarction abrogated the increase in infarct size and cardiac dysfunction produced by injection of human CRP. Therapeutic inhibition of CRP is thus a promising new approach to cardioprotection in acute myocardial infarction, and may also provide neuroprotection in stroke. Potential wider applications include other inflammatory, infective and tissue-damaging conditions characterized by increased CRP production, in which binding of CRP to exposed ligands in damaged cells may lead to complement-mediated exacerbation of tissue injury.