Cost and time control of construction projects: a survey of contractors and consultants in the UK

Numerous techniques have been developed to control cost and time of construction projects. However, there is limited research on issues surrounding the practical usage of these techniques. To address this, a survey was conducted on the top 150 construction companies and 100 construction consultancies in the UK aimed at identifying common project control practices and factors inhibiting effective project control in practice. It found that despite the vast application of control techniques a high proportion of respondents still experienced cost and time overruns on a significant proportion of their projects. Analysis of the survey results concluded that more effort should be geared at the management of the identified top project control inhibiting factors. This paper has outlined some measures for mitigating these inhibiting factors so that the outcome of project time and cost control can be improved in practice.

Potential for broad range multiplexing of fibre Bragg gratings in polymer optical fibres and operation in the 700-nm wavelength range

Refractive index and structural characteristics of optical polymers are strongly influenced by the thermal history of the material. Polymer optical fibres (POF) are drawn under tension, resulting in axial orientation of the polymer molecular chains due to their susceptibility to align in the fibre direction. This change in orientation from the drawing process results in residual strain in the fibre and also affects the transparency and birefringence of the material (1-3). PMMA POF has failure strain as high as over 100%. POF has to be drawn under low tension to achieve this value. The drawing tension affects the magnitude of molecular alignment along the fibre axis, thus affecting the failure strain. The higher the tension the lower the failure stain will be. However, the properties of fibre drawn under high tension can approach that of fibre drawn under low tension by means of an annealing process. Annealing the fibre can generally optimise the performance of POF while keeping most advantages intact. Annealing procedures can reduce index difference throughout the bulk and also reduce residual stress that may cause fracture or distortion. POF can be annealed at temperatures approaching the glass transition temperature (Tg) of the polymer to produce FBG with a permanent blue Bragg wave-length shift at room temperature. At this elevated temperature segmental motion in the structure results in a lower viscosity. The material softens and the molecular chains relax from the axial orientation causing shrinking of the fibre. The large attenuation of typically 1dB/cm in the 1550nm spectral region of PMMA POF has limited FBG lengths to less than 10cm. The more expensive fluorinated polymers with lower absorption have had no success as FBG waveguides. Bragg grating have been inscribed onto various POF in the 800nm spectral region using a 30mW continuous wave 325nm helium cadmium laser, with a much reduced attenuation coefficient of 10dB/m (5). Fabricating multiplexed FBGs in the 800nm spectral region in TOPAS and PMMA POF consistently has lead to fabrication of multiplexed FBG in the 700nm spectral region by a method of prolonged annealing. The Bragg wavelength shift of gratings fabricated in PMMA fibre at 833nm and 867nm was monitored whilst the POF was thermally annealed at 80°C. Permanent shifts exceeding 80nm into the 700nm spectral region was attained by both gratings on the fibre. The large permanent shift creates the possibility of multiplexed Bragg sensors operating over a broad range. -------------------------------------------------------------------------------------------------------------------- 1. Pellerin C, Prud'homme RE, Pézolet M. Effect of thermal history on the molecular orientation in polystyrene/poly (vinyl methyl ether) blends. Polymer. 2003;44(11):3291-7. 2. Dvoránek L, Machová L, Šorm M, Pelzbauer Z, Švantner J, Kubánek V. Effects of drawing conditions on the properties of optical fibers made from polystyrene and poly (methyl methacrylate). Die Angewandte Makromolekulare Chemie. 1990;174(1):25-39. 3. Dugas J, Pierrejean I, Farenc J, Peichot JP. Birefringence and internal stress in polystyrene optical fibers. Applied optics. 1994;33(16):3545-8. 4. Jiang C, Kuzyk MG, Ding JL, Johns WE, Welker DJ. Fabrication and mechanical behavior of dye-doped polymer optical fiber. Journal of applied physics. 2002;92(1):4-12. 5. Johnson IP, Webb DJ, Kalli K, Yuan W, Stefani A, Nielsen K, et al., editors. Polymer PCF Bragg grating sensors based on poly (methyl methacrylate) and TOPAS cyclic olefin copolymer2011: SPIE.

Potential for broad range multiplexing of fibre Bragg gratings in polymer optical fibres and operation in the 700-nm wavelength range

Refractive index and structural characteristics of optical polymers are strongly influenced by the thermal history of the material. Polymer optical fibres (POF) are drawn under tension, resulting in axial orientation of the polymer molecular chains due to their susceptibility to align in the fibre direction. This change in orientation from the drawing process results in residual strain in the fibre and also affects the transparency and birefringence of the material (1-3). PMMA POF has failure strain as high as over 100%. POF has to be drawn under low tension to achieve this value. The drawing tension affects the magnitude of molecular alignment along the fibre axis, thus affecting the failure strain. The higher the tension the lower the failure stain will be. However, the properties of fibre drawn under high tension can approach that of fibre drawn under low tension by means of an annealing process. Annealing the fibre can generally optimise the performance of POF while keeping most advantages intact. Annealing procedures can reduce index difference throughout the bulk and also reduce residual stress that may cause fracture or distortion. POF can be annealed at temperatures approaching the glass transition temperature (Tg) of the polymer to produce FBG with a permanent blue Bragg wave-length shift at room temperature. At this elevated temperature segmental motion in the structure results in a lower viscosity. The material softens and the molecular chains relax from the axial orientation causing shrinking of the fibre. The large attenuation of typically 1dB/cm in the 1550nm spectral region of PMMA POF has limited FBG lengths to less than 10cm. The more expensive fluorinated polymers with lower absorption have had no success as FBG waveguides. Bragg grating have been inscribed onto various POF in the 800nm spectral region using a 30mW continuous wave 325nm helium cadmium laser, with a much reduced attenuation coefficient of 10dB/m (5). Fabricating multiplexed FBGs in the 800nm spectral region in TOPAS and PMMA POF consistently has lead to fabrication of multiplexed FBG in the 700nm spectral region by a method of prolonged annealing. The Bragg wavelength shift of gratings fabricated in PMMA fibre at 833nm and 867nm was monitored whilst the POF was thermally annealed at 80°C. Permanent shifts exceeding 80nm into the 700nm spectral region was attained by both gratings on the fibre. The large permanent shift creates the possibility of multiplexed Bragg sensors operating over a broad range. -------------------------------------------------------------------------------------------------------------------- 1. Pellerin C, Prud'homme RE, Pézolet M. Effect of thermal history on the molecular orientation in polystyrene/poly (vinyl methyl ether) blends. Polymer. 2003;44(11):3291-7. 2. Dvoránek L, Machová L, Šorm M, Pelzbauer Z, Švantner J, Kubánek V. Effects of drawing conditions on the properties of optical fibers made from polystyrene and poly (methyl methacrylate). Die Angewandte Makromolekulare Chemie. 1990;174(1):25-39. 3. Dugas J, Pierrejean I, Farenc J, Peichot JP. Birefringence and internal stress in polystyrene optical fibers. Applied optics. 1994;33(16):3545-8. 4. Jiang C, Kuzyk MG, Ding JL, Johns WE, Welker DJ. Fabrication and mechanical behavior of dye-doped polymer optical fiber. Journal of applied physics. 2002;92(1):4-12. 5. Johnson IP, Webb DJ, Kalli K, Yuan W, Stefani A, Nielsen K, et al., editors. Polymer PCF Bragg grating sensors based on poly (methyl methacrylate) and TOPAS cyclic olefin copolymer2011: SPIE.

‘Death talk’, ‘loss talk’ and identification in the process of ageing

In this paper, we examine the injunction issued by the prominent politician, broadcaster and older people's advocate, Baroness Joan Bakewell, to engage in ‘death talk’. We see positive ethical potential in this injunction, insofar as it serves as a call to confront more directly the prospects of death and dying, thereby releasing creative energies with which to change our outlook on life and ageing more generally. However, when set against a culture that valorises choice, independence and control, the positive ethical potential of such injunctions is invariably thwarted. We illustrate this with reference to one of Bakewell's interventions in a debate on scientific innovation and population ageing. In examining the context of her intervention, we affirm her intuition about its positive ethical potential, but we also point to an ambivalence that accompanies the formulation of the injunction – one that ultimately blunts the force and significance of her intuition. We suggest that Gilleard and Higgs' idea of the third age/fourth age dialectic, combined with the psycho-analytic concepts of fantasy and mourning, allow us to express this intuition better. In particular, we argue that the expression ‘loss talk’ (rather than ‘death talk’) better captures the ethical negotiations that should ultimately underpin the transformation processes associated with ageing, and that our theoretical contextualisation of her remarks can help us see this more clearly. In this view, deteriorations in our physical and mental capacities are best understood as involving changes in how we see ourselves, i.e. in our identifications, and so what is at stake are losses of identity and the conditions under which we can engage in new processes of identification.

Survey of Existing Services in the Mathematical Digital Libraries and Repositories in the EuDML Project

This paper presents a survey of the existing services provided by the digital libraries and repositories on mathematics of the content provider partners in the EuDML project. The purpose is to support the development of the concepts, criteria and methods for the continuous evaluation of these and new relevant existing services. The work was concentrated on the classification of the relevant services in order to specify a common evaluating structure.

Interorganizational innovation and collaboration in the UK medical device sector

Interorganizational team research is a growing body of literature and research has started toexamine team related factors such as interorganizational trust (i.e. Stock, 2006) in theinterorganizational setting. This research applies insights from the intraorganizational teamfield into the interorganizational team setting in order to determine the team related factorspertaining to effective collaboration in medical device innovation projects.Interorganizational collaboration has been a persistent feature within the interorganizationalrelations literature, due to the added benefits that can come with working collaborativelytowards a common goal (Berg-Weger & Schnieder, 1998). While much research has exploredthe structures and performance outcomes of engaging in this cross-boundary working, theliterature is sparse with respect to interpersonal relationships, practices and processes leadingto effective collaboration (Bergenholtz & Waldstrom, 2011; Majchrzak, Jarvenpaa & Bargherz,2015). An interpretivist perspective has informed an exploratory mixed methods approach to datacollection, with contextual insights informing each phase of data collection. Three exploratoryphases of data collection have provided (1) qualitative ethnography data, (1i) qualitativeinterview data and (2) quantitative survey data. The NHS has recently set out agendas to increase innovative procurement (Department ofHealth, 2008), work more closely with industry and SMEs (Innovation and Procurement Plan:Department of Health, 2009) and to increase innovative practice (IHW: NHS, 2011). SMEsdeveloping novel medical devices require input from the NHS to ensure that their devices areclinically applicable and therefore will be adopted by the NHS. These contextual insightsprovide the backdrop for Studies 1i and 2. The findings suggest that the intraorganizational team literature can be extended into theinterorganizational collaboration literature, whilst also explaining the factors relating toeffectiveness and success of interorganizational team innovation.

A kutatási és fejlesztési tevékenység lehetőségei és korlátai a kkv szektorban = Opportunities and constrains in the r&d activities of the smes: description of the research design and the analyzed cases

Ezen kutatási tanulmány módszertani összefoglalója a Kutatási és fejlesztési tevékenység lehetőségei és korlátai a KKV szektorban című kutatási műhely tanulmányainak. A kutatók feltáró, kvalitatív kutatás végeztek, azon belül pontosabban kvalitatív mélyinterjúkon alapuló esettanulmányos kutatást. A kutatók 14 kis- és középvállalkozás vezetőjével készítettek mélyinterjút annak érdekében, hogy feltárják a kis- és középvállalkozások adaptációs és növekedési lehetőségeit és korlátait, valamint az innovációs tevékenységének lehetőségeit és korlátait. Jelen tanulmány röviden bemutatja a vizsgált 14 esetet is. / === / This research paper is the methodological summary of the research working papers entitled Opportunities and constraints in the R&D activities of the SMES. The researchers carried out an explorative, qualitative research, to be more exact a case study research based on qualitative interviews. The researchers conducted interviews with CEOs of 14 SMEs in order to explore the opportunities and constraints in the adaptation and growth potential and in the innovation activities of the SMEs. This paper introduces in brief the analysed 14 case study, too.

A kutatási és fejlesztési tevékenység lehetőségei és korlátai a kkv szektorban A vezető szerepe az innovációban és az innováció értelmezése a kkv szektorban = Opportunities and constrains in the r&d activities of the SMEs: The role of the entrepreneur in the innovation processes and how it is manifasted in their everyday activities

Jelen tanulmány arra keresi a választ, hogy a vállalkozónak milyen szerepe van az innovációban, és az innovációnak milyen különböző értelmezési lehetőségei fedezhetőek fel kis- és középvállalkozási szektorban. Kiindulási pontja a vállalkozó vezető személye és innovatív magatartása, mellyel folyamatosan keresi a fejlődés új lehetőségeit. A vállalkozó az erőforrások kreatív felhasználása és vállalkozói magatartása révén a vállalkozás motorjának tekinthető. A tanulmány alapját kvalitatív mélyinterjúkon alapuló, 14 interjúból álló kutatás képezi, melyek mélyreható elemzése alátámasztotta, hogy az innovációs hajlandóság erősen összefügg a vállalkozói magatartással, és mindkét tényező szorosan köthető a vállalkozás vezetőjéhez. / === / This paper focuses on the entrepreneur’s role in the innovation process and on the way the entrepreneurs interpret the phenomena of innovation and they perceive their role in this process. The paper begins with the presentation of different entrepreneurial models, focusing especially on entrepreneurial management and its linkages to variable forms of innovation. Based on the deep examination of 14 interviews made with Hungarian entrepreneurs, the paper identifies the entrepreneur’s decisive role in the innovation process, furthermore the article confirms the importance of entrepreneurial and risk-taking behavior in innovative organizations.

Sources of metals and sulfur in the mineral deposits of central Idaho, USA

A variety of mineral deposits occur in the Paleozoic sedimentary rocks and Late Cretaceous granitic rocks of central Idaho. The main objective of this project is to identify the sources of metals and sulfur in central Idaho ores. Lead isotope compositions of various crustal rocks were determined and compared with the ore lead composition in order to trace sources of lead, and by inference other metals. Sulfur isotope compositions of various sulfide minerals were also determined to trace the sources of sulfur and to explore the coupling or decoupling of metal and sulfur sources. ^ On the basis of lead and sulfur isotope compositions, two groups of ores are recognized: a sedimentary group and an igneous group. The sedimentary group ores are characterized by radiogenic lead and heavy sulfur typical of upper crustal rocks. The sedimentary group ores were formed by meteoric water-dominated hydrothermal systems that leached metals and sulfur from host Paleozoic sedimentary rocks and the underlying Precambrian crystalline basement rocks. The igneous group ores can be divided into two types, the Carrietown-type, and the non Carrietown-type. The Carrietown-type ores are isotopically different from their host granites and are characterized by low uranogenic lead isotope ratios (206Pb/204Pb and 207Pb/ 204Pb) and variable thorogenic lead isotope ratios (208Pb/ 204Pb) typical of lower crustal rocks. The non Carrietown-type ores are similar to host granites and are more radiogenic in their uranogenic lead isotope ratios when compared to the Carrietown-type ores. The differences in the lead isotope compositions of the igneous group ores are attributed to two different phases of magmatic activity. The magmatic phase exposed on the surface involved melting of shallow crustal Precambrian crystalline rocks as well as mid/lower crustal rocks while the underlying phase was derived by melting of mid/lower crustal rocks only. Igneous group ores have both light and heavy sulfur associated with them and it is a function of interaction of hydrothermal fluids with Paleozoic sedimentary rocks. ^ Paleozoic sedimentary rocks and Precambrian basement rocks are the sources of radiogenic lead, and the granites are the sources of light sulfur. Heavy sulfur comes almost entirely from Paleozoic sedimentary rocks. ^

Fatty acids and stable isotopes as indicators of early-life feeding and potential maternal resource dependency in the bull shark Carcharhinus leucas

The degree of reliance of newborn sharks on energy reserves from maternal resource allocation and the timescales over which these animals develop foraging skills are critical factors towards understanding the ecological role of top predators in marine ecosystems. We used muscle tissue stable carbon isotopic composition and fatty acid analysis of bull sharks Carcharhinus leucas to investigate early-life feeding ecology in conjunction with maternal resource dependency. Values of δ13C of some young-of-the-year sharks were highly enriched, reflecting inputs from the marine-based diet and foraging locations of their mothers. This group of sharks also contained high levels of the 20:3ω9 fatty acid, which accumulates during periods of essential fatty acid deficiency, suggesting inadequate or undeveloped foraging skills and possible reliance on maternal provisioning. A loss of maternal signal in δ13C values occurred at a length of approximately 100 cm, with muscle tissue δ13C values reflecting a transition from more freshwater/estuarine-based diets to marine-based diets with increasing length. Similarly, fatty acids from sharks >100 cm indicated no signs of essential fatty acid deficiency, implying adequate foraging. By combining stable carbon isotopes and fatty acids, our results provided important constraints on the timing of the loss of maternal isotopic signal and the development of foraging skills in relation to shark size and imply that molecular markers such as fatty acids are useful for the determination of maternal resource dependency.

Diversity and knowledge in the age of nation-building: Space and time in the thought of Yanagita Kunio

The study examines the thought of Yanagita Kunio (1875–1962), an influential Japanese nationalist thinker and a founder of an academic discipline named minzokugaku. The purpose of the study is to bring into light an unredeemed potential of his intellectual and political project as a critique of the way in which modern politics and knowledge systematically suppresses global diversity. The study reads his texts against the backdrop of the modern understanding of space and time and its political and moral implications and traces the historical evolution of his thought that culminates in the establishment of minzokugaku. My reading of Yanagita’s texts draws on three interpretive hypotheses. First, his thought can be interpreted as a critical engagement with John Stuart Mill’s philosophy of history, as he turns Mill’s defense of diversity against Mill’s justification of enlightened despotism in non-Western societies. Second, to counter Mill’s individualistic notion of progressive agency, he turns to a Marxian notion of anthropological space, in which a laboring class makes history by continuously transforming nature, and rehabilitates the common people (jomin) as progressive agents. Third, in addition to the common people, Yanagita integrates wandering people as a countervailing force to the innate parochialism and conservatism of agrarian civilization. To excavate the unrecorded history of ordinary farmers and wandering people and promote the formation of national consciousness, his minzokugaku adopts travel as an alternative method for knowledge production and political education. In light of this interpretation, the aim of Yanagita’s intellectual and political project can be understood as defense and critique of the Enlightenment tradition. Intellectually, he attempts to navigate between spurious universalism and reactionary particularism by revaluing diversity as a necessary condition for universal knowledge and human progress. Politically, his minzokugaku aims at nation-building/globalization from below by tracing back the history of a migratory process cutting across the existing boundaries. His project is opposed to nation-building from above that aims to integrate the world population into international society at the expense of global diversity.

State Political Parties in American Politics: Innovation and Integration in the Party System

What role do state party organizations play in twenty-first century American politics? What is the nature of the relationship between the state and national party organizations in contemporary elections? These questions frame the three studies presented in this dissertation. More specifically, I examine the organizational development of the state party organizations and the strategic interactions and connections between the state and national party organizations in contemporary elections.

In the first empirical chapter, I argue that the Internet Age represents a significant transitional period for state party organizations. Using data collected from surveys of state party leaders, this chapter reevaluates and updates existing theories of party organizational strength and demonstrates the importance of new indicators of party technological capacity to our understanding of party organizational development in the early twenty-first century. In the second chapter, I ask whether the national parties utilize different strategies in deciding how to allocate resources to state parties through fund transfers and through the 50-state-strategy party-building programs that both the Democratic and Republican National Committees advertised during the 2010 elections. Analyzing data collected from my 2011 state party survey and party-fund-transfer data collected from the Federal Election Commission, I find that the national parties considered a combination of state and national electoral concerns in directing assistance to the state parties through their 50-state strategies, as opposed to the strict battleground-state strategy that explains party fund transfers. In my last chapter, I examine the relationships between platforms issued by Democratic and Republican state and national parties and the strategic considerations that explain why state platforms vary in their degree of similarity to the national platform. I analyze an extensive platform dataset, using cluster analysis and document similarity measures to compare platform content across the 1952 to 2014 period. The analysis shows that, as a group, Democratic and Republican state platforms exhibit greater intra-party homogeneity and inter-party heterogeneity starting in the early 1990s, and state-national platform similarity is higher in states that are key players in presidential elections, among other factors. Together, these three studies demonstrate the significance of the state party organizations and the state-national party partnership in contemporary politics.

Women Creators: Artistry and Sacrifice in the Novels of Virginia Woolf

This thesis examines different facets of feminine artistry in Virginia Woolf's novels with the purpose of defining her conception of women artists and the role sacrifice plays in it. The project follows characters in "Mrs. Dalloway," "To the Lighthouse," and "Between the Acts" as they attempt to create art despite society's restrictions; it studies the suffering these women experience under regimented institutions and arbitrary gender roles. From Woolf’s earlier texts to her last, she embraces the uncertainty of identity, even as she portrays the artist’s sacrifice in the early-to-mid twentieth century, specifically as the creative female identity fights to adapt to male-dominated spaces. Through a close-reading approach coupled with biographical and historical research, this thesis concludes that although the narratives of Woolf's novels demand the woman artist sacrifice for the sake of pursuing creation, Woolf praises the attempt and considers it a crueler fate to live with unfulfilled potential.