Characterizing the impact of minor cannula design modification.

OBJECTIVE: Bench evaluation of the hydrodynamic behavior of venous cannulas is a valuable technique for the analysis of their performance during cardiopulmonary bypass (CPB). The aim of this study was to investigate the effect of the internal diameter of the extracorporeal connecting tube of venous cannulas on flow rate (Q), pressure drop (delta P), and cannula resistance (delta P/Q²) values, using a computer assisted test bench.¦METHODS: An in vitro circuit was set up with silicone tubing between the test cannula encased in a movable reservoir, and a static reservoir. The delta P, defined as the difference between the drainage pressure and the preload pressure, was measured using high-fidelity Millar pressure transducers. Q was measured using an ultrasonic flowmeter. Data display and data recording were controlled using virtual instruments in a stepwise fashion.¦RESULTS: The 27 F smartcanula® with a 9 mm connecting tube diameter showed 17% less resistance compared to that with an 8 mm connecting tube diameter. Q values were 7.22±0.1 and 7.81±0.04 L/min for cannulas with 8 mm and 9 mm connecting tube diameters, respectively. The delta P/Q² ratio values were 72% lower for the Medtronic cannula with a 9 mm connecting tube diameter compared to that with an 8 mm connecting tube diameter. Q values for the Medtronic cannula were 3.94±0.23 and 6.58±0.04 L/min with 8 mm and 9 mm connecting tube diameters, respectively. The 27 F smartcanula® showed 13% more flow rate compared to the 28 F Medtronic cannula using the unpaired Student t-test (p<0.0001).¦CONCLUSIONS: Our results demonstrated that Q was increased but delta P and delta P/Q² values were significantly decreased when the connecting tube diameter was increased for venous cannulas. The connecting tube diameter significantly affected the resistance to liquid flow through the cannula. Smartcanulas® outperform Medtronic cannulas.

1.° Opus magisterii : authore Arnaldo de Villanova ; subjecta varia experimenta chymica. — 2.° Rosae, sive liber perfecti magisterii : authore Rhasi, Philosopho. — 3.° Anonymus de origine metallorum. — 4.° Tractatus cujus titulus : opes Galeni alchimiae. — 5.° Varia experimenta chymica, ex variis authoribus excerpta. — 6.° Semita recta ; sive liber de alkimia : authore Alberto Magno. — 7.° Alia experimenta chymica. — 8.° Alkimia minor Alberti Magni, episcopi Ratisponensis. — 9.° Liber de practica roris Madii, datus Bonifacio Papae VIII. — 10.° Thesaurus secretus naturalium operationum : authore Arnaldo de Villanova. — 11.° Alia experimenta chymica. — 12.° Practica alchymiae ; gallico idiomate : ibi reperias indicem claviculae, ut vocant, Salomonis, Regis Israël.

Bigotianus

Value added logistics in supply and demand chains. Smile. Part 1. eBusiness between global company and itslocal sme supplier network

VALOSADE (Value Added Logistics in Supply and Demand Chains) is the research project of Anita Lukka's VALORE (Value Added Logistics Research) research team inLappeenranta University of Technology. VALOSADE is included in ELO (Ebusiness logistics) technology program of Tekes (Finnish Technology Agency). SMILE (SME-sector, Internet applications and Logistical Efficiency) is one of four subprojects of VALOSADE. SMILE research focuses on case network that is composed of small and medium sized mechanical maintenance service providers and global wood processing customers. Basic principle of SMILE study is communication and ebusiness insupply and demand network. This first phase of research concentrates on creating backgrounds for SMILE study and for ebusiness solutions of maintenance case network. The focus is on general trends of ebusiness in supply chains and networksof different industries; total ebusiness system architecture of company networks; ebusiness strategy of company network; information value chain; different factors, which influence on ebusiness solution of company network; and the correlation between ebusiness and competitive advantage. Literature, interviews and benchmarking were used as research methods in this qualitative case study. Networks and end-to-end supply chains are the organizational structures, which can add value for end customer. Information is one of the key factors in these decentralized structures. Because of decentralization of business, information is produced and used in different companies and in different information systems. Information refinement services are needed to manage information flows in company networksbetween different systems. Furthermore, some new solutions like network information systems are utilised in optimising network performance and in standardizingnetwork common processes. Some cases have however indicated, that utilization of ebusiness in decentralized business model is not always a necessity, but value-add of ICT must be defined case-specifically. In the theory part of report, different ebusiness and architecture models are introduced. These models are compared to empirical case data in research results. The biggest difference between theory and empirical data is that models are mainly developed for large-scale companies - not for SMEs. This is due to that implemented network ebusiness solutions are mainly large company centered. Genuine SME network centred ebusiness models are quite rare, and the study in that area has been few in number. Business relationships between customer and their SME suppliers are nowadays concentrated more on collaborative tactical and strategic initiatives besides transaction based operational initiatives. However, ebusiness systems are further mainly based on exchange of operational transactional data. Collaborative ebusiness solutions are in planning or pilot phase in most case companies. Furthermore, many ebusiness solutions are nowadays between two participants, but network and end-to-end supply chain transparency and information systems are quite rare. Transaction volumes, data formats, the types of exchanged information, information criticality,type and duration of business relationship, internal information systems of partners, processes and operation models (e.g. different ordering models) differ among network companies, and furthermore companies are at different stages on networking and ebusiness readiness. Because of former factors, different customer-supplier combinations in network must utilise totally different ebusiness architectures, technologies, systems and standards.

Germinação de sementes e emergência de plântulas de Oenocarpus minor Mart. (Arecaceae)

O presente trabalho teve como objetivo avaliar a influência da temperatura e do substrato na germinação, bem como determinar a profundidade ideal de semeadura para emergência de plântulas de Oenocarpus minor Mart. Utilizou-se o delineamento experimental inteiramente casualizado, em esquema fatorial 3x4 (temperatura x substrato), com três repetições de 30 sementes cada. As sementes foram colocadas no interior de caixas plásticas contendo substrato umedecido com água destilada e mantidas em câmaras de germinação à temperatura constante e com fotoperíodo de 12 horas. Para a emergência, foram usadas 4 repetições de 24 sementes, distribuídas em bandeja plásticas, com plantmax e vermiculita, em 0; 2 e 4 cm de profundidade de semeadura, mantidas em casa de vegetação. Baseado nos resultados obtidos, os substratos mais adequados para a germinação de sementes foram a areia e a vermiculita, e a melhor temperatura foi a de 30ºC. Profundidade superior a 2 cm é inadequada para a semeadura de Oenocarpus minor Mart.

Content value chains modelling using a copyright ontology

Existing digital rights management (DRM) systems, initiatives like Creative Commons or research works as some digital rights ontologies provide limited support for content value chains modelling and management. This is becoming a critical issue as content markets start to profit from the possibilities of digital networks and the World Wide Web. The objective is to support the whole copyrighted content value chain across enterprise or business niches boundaries. Our proposal provides a framework that accommodates copyright law and a rich creation model in order to cope with all the creation life cycle stages. The dynamic aspects of value chains are modelled using a hybrid approach that combines ontology-based and rule-based mechanisms. The ontology implementation is based on Web Ontology Language and Description Logic (OWL-DL) reasoners, are directly used for license checking. On the other hand, for more complex aspects of the dynamics of content value chains, rule languages are the choice.

Kineettinen tarkastelu keskisakeusalueella toimivalle happivaiheelle

Työn tavoitteena oli tarkastella keskisakeudessa toimivan happidelignifioinnin kinetiikkaa ja vertailla sitä olemassa olevien kineettisten tutkimuksien kanssa. Lisäksi tutkittiin kuinka happivaiheen suodos vaikuttaa delignifiointiasteeseen sekä selektiivisyyteen. Työn kirjallisuusosassa perehdyttiin happidelignifioinnin kineettisiin malleihin, jotka on kehitetty ennustamaan alkalin, paineen, lämpötilan ja ajan vaikutusta ligniinin poistumiselle sekä hiilihydraattiketjujen katkeilulle. Delignifioituminen on nopeaa ensimmäisen kymmenen minuutin aikana ja hidastuu jäännösdelignifiointivaiheessa. Laboratoriotutkimuksissa selvitettiin kuinka prosessimuuttujat vaikuttavat kappaluvun ja viskositeetin muutokseen. Tuloksia tarkasteltiin lineaarisella regressioanalyysillä, jonka avulla muuttujien vaikutukset saadaan selkeästi esille. Happivaiheen ensimmäisessä vaiheessa suurin vaikutus delignifiointiasteeseen sekä viskositeetin alenemiseen on alkaliannoksella. Pienillä hapen annostuksella saavutettiin hyvä selektiivisyys, suurillakin alkaliannoksilla. Lämpötilan vaikutus on lähes olematon, kun paine on pieni. Kun paine kasvaa, kasvaa myös lämpötilan vaikutus delignifiointiasteeseen. Hiilihydraattien depolymerisoituminen lisääntyy lämpötilan kasvaessa lähes lineaarisesti, riippumatta paineesta. Hyvä loppuselektiivisyys saavutetaan kun ensimmäisen vaiheen selektiivisyys on hyvä. Ensimmäisessä vaiheessa saavutettiin hyvä selektiivisyys, kun alkali ei pääse kulumaan loppuun eikä delignifioituminen jatku liian pitkälle. Toisessa vaiheessa selektiivisyys säilyy parhaiten, kun lisättävä alkaliannos on pieni. Lämpötila ja paine vaikuttavat alkaliannokseen verrattuna hyvin vähän loppuselektiivisyyteen.

Easy introduction of maleimides at different positions of oligonucleotide chains for conjugation purposes

[2,5-Dimethylfuran]-protected maleimides were placed at both internal positions and the 3'-end of oligonucleotides making use of solid-phase synthesis procedures. A new phosphoramidite derivative and a new solid support incorporating the protected maleimide moiety were prepared for this purpose. In all cases maleimide deprotection (retro-Diels-Alder reaction) followed by reaction with thiol-containing compounds afforded the target conjugate.

Papillary cystoadenoma lymphomatosum (Warthin-like) of minor salivary glands

Papillary cystadenoma lymphomatosum is a benign salivary gland tumor most frequently located in the parotid gland (Warthin"s tumor). Its presentation in other major, or in minor, salivary glands is rare. Clinically, it manifests as a slow growing tumor, fluctuant on palpation due to its cystic morphology. The treatment of choice is complete excision with wide tumor-free margins. We present a 73-year-old female patient with an asymptomatic tumor of 8 years evolution in the right posterior area of the hard palate. We performed surgical excision and a biopsy, which was reported as papillary cystadenoma lymphomatosum. During the post-operative examination carried out after 3 weeks, it was observed that the lesion had recurred. The lesion was re-operated, performing the excision with CO2 laser and including the periosteum to ensure complete resection of the tumor. At 10 months follow-up, there was no recurrence of the lesion. This article includes a review of this condition and discusses its most important clinical and pathologic features and therapeutic approaches.

Impact of unbalanced minor route versus major route karyotypes at diagnosis on prognosis of CML.

Major route additional cytogenetic aberrations (ACA) at diagnosis of chronic myeloid leukaemia (CML) indicate an increased risk of progression and shorter survival. Since major route ACA are almost always unbalanced, it is unclear whether other unbalanced ACA at diagnosis also confer an unfavourable prognosis. On the basis of 1348 Philadelphia chromosome-positive chronic phase patients of the randomized CML study IV, we examined the impact of unbalanced minor route ACA at diagnosis versus major route ACA on prognosis. At diagnosis, 1175 patients (87.2 %) had a translocation t(9;22)(q34;q11) and 74 (5.5 %) a variant translocation t(v;22) only, while a loss of the Y chromosome (-Y) was present in addition in 44 (3.3 %), balanced or unbalanced minor route ACA each in 17 (1.3 %) and major route ACA in 21 (1.6 %) cases. Patients with unbalanced minor route ACA had no significantly different cumulative incidences of complete cytogenetic remission or major molecular remission and no significantly different progression-free survival (PFS) or overall survival (OS) than patients with t(9;22), t(v;22), -Y and balanced minor route karyotypes. In contrast, patients with major route ACA had a shorter OS and PFS than all other groups (all pairwise comparisons to each of the other groups: p ≤ 0.015). Five-year survival probabilities were for t(9;22) 91.4 % (95 % CI 89.5-93.1), t(v; 22) 87 % (77.2-94.3), -Y 89.0 % (76.7-97.0), balanced 100 %, unbalanced minor route 92.3 % (72.4-100) and major route 52.2 % (28.2-75.5). We conclude that only major route, but not balanced or unbalanced minor route ACA at diagnosis, has a negative impact on prognosis of CML.