Estudo experimental e modelagem do processo de sacarificação e fermentação simultânea utilizando bagaço de cana-de-açúcar para produção de etanol

Conselho Nacional de Desenvolvimento Científico e Tecnológico - CNPq

Secagem de resíduo de goiaba em secador convectivo de bandejas: modelagem matemática e análise do processo

Actually, Brazil is one of the larger fruit producer worldwide, with most of its production being consumed in nature way or either as juice or pulp. It is important to highlig ht in the fruit productive chain there are a lot lose due mainly to climate reasons, as well as storage, transportation, season, market, etc. It is known that in the pulp and fruit processing industy a yield of 50% (in mass) is usually obtained, with the other part discarded as waste. However, since most this waste has a high nutrient content it can be used to generate added - value products. In this case, drying plays an important role as an alternative process in order to improve these wastes generated by the fruit industry. However, despite the advantage of using this technique in order to improve such wastes, issues as a higher power demand as well as the thermal efficiency limitation should be addressed. Therefore, the control of the main variables in t his drying process is quite important in order to obtain operational conditions to produce a final product with the target specification as well as with a lower power cost. M athematical models can be applied to this process as a tool in order to optimize t he best conditions. The main aim of this work was to evaluate the drying behaviour of a guava industrial pulp waste using a batch system with a convective - tray dryer both experimentally and using mathematical modeling. In the experimental study , the dryin g carried out using a group of trays as well as the power consume were assayed as response to the effects of operational conditions (temperature, drying air flow rate and solid mass). Obtained results allowed observing the most significant variables in the process. On the other hand, the phenomenological mathematical model was validated and allowed to follow the moisture profile as well as the temperature in the solid and gas phases in every tray. Simulation results showed the most favorable procedure to o btain the minimum processing time as well as the lower power demand.

Da maniva ao grolado: práticas produtivas e patrimoniais no processo identitário dos Tremembé de Almofala (CE)

The indigenous political scene in Brazil is undergoing transformations that need to be better analyzed by scholars in the field of the Social Sciences. The deficit in the policy of indigenous land demarcation emerges as the largest obstacle in the conquest of collective rights. Therefore, a study to analyze renewed strategies in the struggle for social rights, and their implications in local everyday life relations, is urgent. In this context, the aim of this research is to understand the current social dynamics of identity among the Tremembé people of Almofala, in the state of Ceará, Brazil, with a fieldwork conducted in the flour mill of the Casa de Farinha Comunitária project, in the Lameirão community. Specific aims are: a) to analyze the processes involved in the project in order to comprehend their meanings and appropriations as well as their everyday life and political uses; b) understand the strategies to fight for social benefits; c) analyze the local ethnic classifications grounding the construction of the Tremembé identity in Almofala. Methods deployed are ethnography of communities, used to apprehend the social production of networks of relationships, and a social cartography of practices. The realization of rights demanded by the indigenous populations in Brazil is intertwined with a process of social and legal legitimation their identity and cultural heritage. Such legitimation works as a safeguard mechanism of rights secured by the Constitution. Therefore, to own a “cultural heritage” is perceived as a “passport” to benefit from emerging rights. Amid this context, changes in the traditional processing of the cassava root, a productive practice shared locally by diverse social groups, is reified as cultural heritage by the Tremembé people of Almofala and their network of collaborators in the pursuit of accessing distinctive public policies. Furthermore, the research came across specific social arrangements of local subjects which unfolded internal struggles, enabling to understand the dynamics of the Tremembé of Almofala identity process.

A releitura de um documento: o processo de tombamento do centro histórico de Natal (RN)

During over seven decades of institutionalizing the national heritage protection legal instrument it can be noticed the many ways of the instrument application, according to the approaches that were assigned to the spaces with heritage values and the dynamic of the elaborated thoughts within this theme. For the application of the instrument effectively, there is a long process that is carried out. This process begins with the study elaboration that aims to subsidize and justify the motivation of property protection, as well as the proposal of buffer zones and national protection areas delimitations, completing the process with the denial of the request or with the publication of the definitive national protection area at the Official Gazette. Starting with the relation between the existing heritage values identification into the historical centres and the definition of its protection areas that the area management will be done, based as well into the management intervention norms established for the protection area perimeter. From this context, the present essay has as porpoise to discuss the approach used for the identification and selection of a historical centre liable for national protection and the repercussion of this identification into the national protection area the was established, using a case study of the national protection of the historical centre of the city of Natal. Starting from the assumption that there are inconsistences and distortions about the text speech of the written document and the spatial delimitation of this document, motivated by an area that privileges the edifications rather than the urban space. Beginning with the urban history methodology, we are based on the precepts of Rossi (2011), Lamas (2010) and Cullen (2009) for that space reading, along with what Sant’Anna (2004) defines as “city-document” to make a new reading of this “heritage value space” verifying if the proposed protection area reflects what is defined as motivation for the national protection area process during the recognizing process. Therefore, it is concluded that it is essential that the buffer zones and the national protection areas are aligned with the text presented at the national protection area instruction, so the norms and criteria definition management process are established. We highlight that a site management and the identified values protection become very difficult without a specific law that beacon the decisions that should be taken.

Avaliação do desempenho da paligorsquita modificada e do carvão da pirólise do lodo de esgoto no processo de degradação fotocatalítica do fenol

The uncontrolled disposal of wastewaters containing phenolic compounds by the industry has caused irreversible damage to the environment. Because of this, it is now mandatory to develop new methods to treat these effluents before they are disposed of. One of the most promising and low cost approaches is the degradation of phenolic compounds via photocatalysis. This work, in particular, has as the main goal, the customization of a bench scale photoreactor and the preparation of catalysts via utilization of char originated from the fast pyrolysis of sewage sludge. The experiments were carried out at constant temperature (50°C) under oxygen (410, 515, 650 and 750 ml min-1). The reaction took place in the liquid phase (3.4 liters), where the catalyst concentration was 1g L-1 and the initial concentration of phenol was 500 mg L-1 and the reaction time was set to 3 hours. A 400 W lamp was adapted to the reactor. The flow of oxygen was optimized to 650 ml min-1. The pH of the liquid and the nature of the catalyst (acidified and calcined palygorskite, palygorskite impregnated with 3.8% Fe and the pyrolysis char) were investigated. The catalytic materials were characterized by XRD, XRF, and BET. In the process of photocatalytic degradation of phenol, the results showed that the pH has a significant influence on the phenol conversion, with best results for pH equal to 5.5. The phenol conversion ranged from 51.78% for the char sewage sludge to 58.02% (for palygorskite acidified calcined). Liquid samples analyzed by liquid chromatography and the following compounds were identified: hydroquinone, catechol and maleic acid. A mechanism of the reaction was proposed, whereas the phenol is transformed into the homogeneous phase and the others react on the catalyst surface. For the latter, the Langmuir-Hinshelwood model was applied, whose mass balances led to a system of differential equations and these were solved using numerical methods in order to get estimates for the kinetic and adsorption parameters. The model was adjusted satisfactorily to the experimental results. From the proposed mechanism and the operating conditions used in this study, the most favored step, regardless of the catalyst, was the acid group (originated from quinone compounds), being transformed into CO2 and water, whose rate constant k4 presented value of 0.578 mol L-1 min-1 for acidified calcined palygorskite, 0.472 mol L-1 min-1 for Fe2O3/palygorskite and 1.276 mol L-1 min-1 for the sludge to char, the latter being the best catalyst for mineralization of acid to CO2 and water. The quinones were adsorbed to the acidic sites of the calcined palygorskite and Fe2O3/palygorskite whose adsorption constants were similar (~ 4.45 L mol-1) and higher than that of the sewage sludge char (3.77 L mol-1).

Avaliação do desempenho da paligorsquita modificada e do carvão da pirólise do lodo de esgoto no processo de degradação fotocatalítica do fenol

The uncontrolled disposal of wastewaters containing phenolic compounds by the industry has caused irreversible damage to the environment. Because of this, it is now mandatory to develop new methods to treat these effluents before they are disposed of. One of the most promising and low cost approaches is the degradation of phenolic compounds via photocatalysis. This work, in particular, has as the main goal, the customization of a bench scale photoreactor and the preparation of catalysts via utilization of char originated from the fast pyrolysis of sewage sludge. The experiments were carried out at constant temperature (50°C) under oxygen (410, 515, 650 and 750 ml min-1). The reaction took place in the liquid phase (3.4 liters), where the catalyst concentration was 1g L-1 and the initial concentration of phenol was 500 mg L-1 and the reaction time was set to 3 hours. A 400 W lamp was adapted to the reactor. The flow of oxygen was optimized to 650 ml min-1. The pH of the liquid and the nature of the catalyst (acidified and calcined palygorskite, palygorskite impregnated with 3.8% Fe and the pyrolysis char) were investigated. The catalytic materials were characterized by XRD, XRF, and BET. In the process of photocatalytic degradation of phenol, the results showed that the pH has a significant influence on the phenol conversion, with best results for pH equal to 5.5. The phenol conversion ranged from 51.78% for the char sewage sludge to 58.02% (for palygorskite acidified calcined). Liquid samples analyzed by liquid chromatography and the following compounds were identified: hydroquinone, catechol and maleic acid. A mechanism of the reaction was proposed, whereas the phenol is transformed into the homogeneous phase and the others react on the catalyst surface. For the latter, the Langmuir-Hinshelwood model was applied, whose mass balances led to a system of differential equations and these were solved using numerical methods in order to get estimates for the kinetic and adsorption parameters. The model was adjusted satisfactorily to the experimental results. From the proposed mechanism and the operating conditions used in this study, the most favored step, regardless of the catalyst, was the acid group (originated from quinone compounds), being transformed into CO2 and water, whose rate constant k4 presented value of 0.578 mol L-1 min-1 for acidified calcined palygorskite, 0.472 mol L-1 min-1 for Fe2O3/palygorskite and 1.276 mol L-1 min-1 for the sludge to char, the latter being the best catalyst for mineralization of acid to CO2 and water. The quinones were adsorbed to the acidic sites of the calcined palygorskite and Fe2O3/palygorskite whose adsorption constants were similar (~ 4.45 L mol-1) and higher than that of the sewage sludge char (3.77 L mol-1).

Modelagem da degradação de fenol em efluentes aquosos através do processo de foto-fenton

Advanced Oxidation Processes (AOP) are techniques involving the formation of hydroxyl radical (HO•) with high organic matter oxidation rate. These processes application in industry have been increasing due to their capacity of degrading recalcitrant substances that cannot be completely removed by traditional processes of effluent treatment. In the present work, phenol degrading by photo-Fenton process based on addition of H2O2, Fe2+ and luminous radiation was studied. An experimental design was developed to analyze the effect of phenol, H2O2 and Fe2+ concentration on the fraction of total organic carbon (TOC) degraded. The experiments were performed in a batch photochemical parabolic reactor with 1.5 L of capacity. Samples of the reactional medium were collected at different reaction times and analyzed in a TOC measurement instrument from Shimadzu (TOC-VWP). The results showed a negative effect of phenol concentration and a positive effect of the two other variables in the TOC degraded fraction. A statistical analysis of the experimental design showed that the hydrogen peroxide concentration was the most influent variable in the TOC degraded fraction at 45 minutes and generated a model with R² = 0.82, which predicted the experimental data with low precision. The Visual Basic for Application (VBA) tool was used to generate a neural networks model and a photochemical database. The aforementioned model presented R² = 0.96 and precisely predicted the response data used for testing. The results found indicate the possible application of the developed tool for industry, mainly for its simplicity, low cost and easy access to the program.

Modelagem da degradação de fenol em efluentes aquosos através do processo de foto-fenton

Advanced Oxidation Processes (AOP) are techniques involving the formation of hydroxyl radical (HO•) with high organic matter oxidation rate. These processes application in industry have been increasing due to their capacity of degrading recalcitrant substances that cannot be completely removed by traditional processes of effluent treatment. In the present work, phenol degrading by photo-Fenton process based on addition of H2O2, Fe2+ and luminous radiation was studied. An experimental design was developed to analyze the effect of phenol, H2O2 and Fe2+ concentration on the fraction of total organic carbon (TOC) degraded. The experiments were performed in a batch photochemical parabolic reactor with 1.5 L of capacity. Samples of the reactional medium were collected at different reaction times and analyzed in a TOC measurement instrument from Shimadzu (TOC-VWP). The results showed a negative effect of phenol concentration and a positive effect of the two other variables in the TOC degraded fraction. A statistical analysis of the experimental design showed that the hydrogen peroxide concentration was the most influent variable in the TOC degraded fraction at 45 minutes and generated a model with R² = 0.82, which predicted the experimental data with low precision. The Visual Basic for Application (VBA) tool was used to generate a neural networks model and a photochemical database. The aforementioned model presented R² = 0.96 and precisely predicted the response data used for testing. The results found indicate the possible application of the developed tool for industry, mainly for its simplicity, low cost and easy access to the program.

Influência da utilização do fluido de corte com adição de grafeno na temperatura de usinagem e formação de rebarba no processo de micro fresamento

As time passed, humanity needed the development of new materials used in various activities. High strength materials such as titanium and Inconel for example, had been studied because they are widely used for implants in biomedicine, as well as their use in aerospace and automotive industries. Because of its thermal and mechanical properties, these materials are considered difficult to machine, promoting a rapid wear of cutting tools, primarily caused by the high temperatures in machining. With the development of new materials has emerged the need of developing new manufacturing processes. One of today’s innovative processes is the micro-manufacturing. Being a process with a defined cutting tool geometry, burr formation is a constant and undesirable phenomenon formed during the machininig process. Being detrimental to the manufacturing process, overspending deburring operations are constantly employed leading to increase the aggregate cost to the manufactured material. Assembly components are also impaired if there is no control of the burr, with consequences including the disposal of components due to the occurence of this phenomenon. This paper presents the study of micro-milling Inconel 718, investigating influential parameters in the formation of burrs in order to minimize the occurrence of this phenome non. Different feed rates per tooth and cutting speed are evaluated, and different cutting fluids with different methods of applying the fluid. Adding graphene to cutting fluids was considered as a variable to be investigated, which is considered an excellent solid lubricant, in addition to increasing the thermal conductivity of the cooling solution (AZIMI; MOZAF FARI, 2015). The micro-milling temperature was evaluated in the present work. It was observed a new phenomenon that causes the machined surface temperature decreases below room temperature when using the solution water + oil. This phenomenon is explained in further chapters. In order to unravel this phenomenon, a new test was proposed and, from this test, it can be concluded, comparatively, which cutting fluid has a better cooling property.Using cutting fluid with different thermal properties has shown influence when analy zing burr formation and reducing machining temperature.

HIP HOP COMO PROCESSO COMUNICACIONAL E SOCIABILIDADE PARA JOVENS INDÍGENAS DE DOURADOS – MS

Estudo sobre o Hip Hop como processo comunicacional e sociabilidade entre jovens indígenas de Dourados, Mato Grosso do Sul, para verificar quais os principais objetivos da prática do movimento Hip Hop, compreender se serve como comunicação, contribui para o fortalecimento da língua guarani ou gera novas tensões sociais na reserva. Para tanto, foi analisado aspectos históricos do movimento, passando pelos Estudos Culturais, e como Movimento Social, dando início à discussão de uma voz alternativa por meio do Hip Hop. Do ponto de vista metodológico, trata-se de um de estudo de caso, com representantes dos grupos de jovens Brô Mc's e Jovens Conscientes, das reservas Jaguapirú e Bororó, das etnias Guarani-Kaiowá de Dourados (MS). Foram realizadas entrevistas semiestruturadas junto a jovens que participaram das oficinas de hip hop, das lideranças indígenas e professores. A investigação é complementada pela pesquisa bibliográfica, documental e análises das letras de rap em confrontação com as visões da imprensa, a partir da análise dos jornais Diário MS e O Progresso. Os resultados apontam que os jovens se apropriam de uma cultura global para transformar o ambiente local com objetivo de preservar a língua guarani, uma alternativa para o conhecimento, logo para não seguirem caminhos como o das drogas. Negociando falas sobre sua realidade, dentro e fora da reserva, já que nos meios de comunicação locais há pouco espaço para a voz dos indígenas e dentro da reserva ainda há contestação do movimento em um contexto político, na tentativa de atingir uma cultura “pura”, devido à preocupação dos mais velhos com a perda de território.

Contradições como força de mudança: o processo de formação continuada de professores do ensino médio enquanto potencializador da práxis transformadora à luz da teoria histórico-cultural

The intervention research proposed was based on the Cultural-Historical Theory based on the laws and logic of materialism historical-dialectical. Therefore, we tried to design a research process that involved all as responsible for the process. In the field of continuous teacher's training usually has been found dualistic relationship / paradoxical processes as a result of the adopted training models which are characterized by individualist human processes. The teacher training work sought to overcome this dualism, to promote the unveiling of the contradictions with regard to teaching models. As a hypothesis, we imagined that immersed in this process, teachers recognize such contradictions, and this recognition would make the contradictions become the driving force of change in teaching practice, realizing the teaching-learning-development triad as the basis of praxis. Aiming to develop a process of continuing education to bring results to the professional teachers development looking for answer the following research question: How and what the changes of teachers who participated in the Didactic-Formative Intervention process raised the quality of their teaching practices? In this context, the objective of the research was to develop a process of Didactic-Formative Intervention from the perspective of Cultural-Historical Theory with high school teachers in order to theorize about the changes in pedagogical practices of teachers and learn aspects that transform the essence teaching practice. The research involved two high school teachers of a public school in Uberlândia-MG. The training meetings took place at the school through a collective study group between the years 2013 and 2015. As procedures were used two interconnected aspects: classes observations, and a theoretical and methodological training, both for diagnosis and for the process evaluation, the second aspect has a formative dimension, and a didactic dimension (double meaning) to form didactically the teacher and to elaborate didactic procedures. The collected data were analyzed by observing the assumptions of the method, analysis by units and the processuality. As results teachers showed changes in their teaching practices regarding the organization of the pedagogical work and also centered their design educational actions based on learning and development of the students. The presence of continuous diagnosis during the classes, work with a systems of concepts and their conceptual links, problematization as a teaching method can be pointed as meaningful changes in their praxis. Regarding the training activities that emerged from the analysis of the compiled materials and analyzed throughout the process can be emphasized: forming a collective group of school teachers continuous training, diagnostics, development of practical activities, increase relationships among participants, the choice of scientific material used should have direct relation to the needs of the participants, promoting conditions that enable the emergence of contradictions between the pedagogical practice of teachers and teaching based on the perspective of the Cultural-Historical Theory. This research craved to develop and design a teachers' training processes that increase the quality of teachers life and ways of teaching in the Brazilian public school.

Projeto de desenvolvimento turístico para o Parque Tecnológico de Óbidos

A atividade turística tem sido um processo em alteração continua e em perpétua mudança, tornando-se este sector, algo que se deve tomar uma atenção cuidada, pois estas mudanças, obrigam a que estejamos sempre em alerta e em constante alteração dos nossos serviços e da qualidade deles, pois a influência que estas mudanças têm nos nossos clientes, obrigam-nos a uma constante atenção para ir ao encontro das suas necessidades. Tendo em conta esta necessidade, origina-se uma maior competitividade empresarial sendo ela imprescindível para conhecer melhor as novas necessidades dos clientes, que estão cada vez mais informados e atentos. O Marketing turístico permite orientar as empresas para as suas melhores formas de agir, permitindo obter novas e mais interessantes atrações que cativem os clientes. Deste modo a importância do Marketing torna-se cada vez mais fundamental para atingir o sucesso desejável. O planeamento de Marketing implica decidir quais as melhores estratégias a estabelecer para a empresa atingir os seus objetivos, desta forma é necessário um plano detalhada para cada empresa. Assim, o objetivo deste trabalho centra-se na realização de um plano de Marketing para o Parque Tecnológico de Óbidos, dando especial atenção a um plano cuidado que vá de encontro a solucionar os seus principais problemas, concretamente a falta de venda/arrendamento de lotes.

Avaliação do extrato do fungo caripia montagnei e de agonistas de PPAR - α no processo inflamatório

The mushrooms have been object of intense research in view of its potential raising of application in different sectors of the pharmacology and alimentary industry. Among diverse bioactive composites of polyssacharides nature that exist in the fungus the glucans are much searched. These are polymers of glucose and classified as the type of glicosidic linking [α, β]. Peroxisome proliferator-activated receptors (PPARs), ranscription factors belonging to the family of nuclear receptors that bind themselves o specific agonists, have shown their importance in controlling the inflammatory process. The aim of this study was to perform a chemical characterization of extract rom the mushroom Caripia montagnei, assess its antiinflammatory and antibacterial effect and determine if this effect occurs via PPAR. This mushroom is composed of carbohydrates (63.3±4.1%), lipids (21.4l±0.9%) and proteins (2.2± 0.3%). The aqueous solution resulting from the fractionation contained carbohydrates (98.7±3.3%) and protein (1.3±0.25%). Analyses of infrared spectrophotometry and of nuclear magnetic esonance demonstrated that the extract of mushroom C. montagnei is rich in β-glucans. In hioglycolate-induced peritonitis, the C. montagnei glucans (50 mg/kg) educed the inflammatory process in 65.5±5.2% and agonists, pharmacological igands, for PPAR: Wy-14643 (49.3±6.1%), PFOA (48.9±3.8%) and clofibrate in 45.2±3.2%. Sodium diclofenac showed a reduction of 81.65±0.6%. In the plantar edema, the glucans from C. montagnei (50 mg/kg) and L-NAME reduced the edema to a similar degree 91.4±0.3% and 92.8±0,5 %, respectively. In all the groups tested, nitric oxide (NO), an inflammation mediator, showed a significant reduction in the nitrate/nitrite levels when compared to the positive control (P<0.001). The C. montagnei glucans did not show cytotoxicity in the concentrations tested (2.5, 5.0, 10.0, 20.0 and 40.0 µg/100 µL). Antibacterial activity demonstrated that, unlike total extract, there was no inhibition of bacterial growth. The C. montagnei glucans show great potential for antiinflammatory applications. This effect suggests that it is mediated by PPAR activation and by COX and iNOS inhibition

Novas propriedades do SKTI (Inibidor de tripsina de soja): inibição para elastase neutrofílica humana e efeitos no processo de injúria pulmonar aguda

Seeds from legumes including the Glycine max are known to be a rich source of protease inhibitors. The soybean Kunitz trypsin inhibitor (SKTI) has been well characterised and has been found to exhibit many biological activities. However its effects on inflammatory diseases have not been studied to date. In this study, SKTI was purified from a commercial soy fraction, enriched with this inhibitor, using anion exchange chromatography Resource Q column. The purified protein was able to inhibit human neutrophil elastase (HNE) and bovine trypsin. . Purified SKTI inhibited HNE with an IC50 value of 8 µg (0.3 nM). At this concentration SKTI showed neither cytotoxic nor haemolytic effects on human blood cell populations. SKTI showed no deleterious effects on organs, blood cells or the hepatic enzymes alanine amine transferase (ALT) and aspartate amino transferase (AST) in mice model of acute systemic toxicity. Human neutrophils incubated with SKTI released less HNE than control neutrophils when stimulated with PAF or fMLP (83.1% and 70% respectively). These results showed that SKTI affected both pathways of elastase release by PAF and fMLP stimuli, suggesting that SKTI is an antagonist of PAF/fMLP receptors. In an in vivo mouse model of acute lung injury, induced by LPS from E. coli, SKTI significantly suppressed the inflammatory effects caused by elastase in a dose dependent manner. Histological sections stained by hematoxylin/eosin confirmed this reduction in inflammation process. These results showed that SKTI could be used as a potential pharmacological agent for the therapy of many inflammatory diseases

Processo biotecnológico voltado a produção de estoques poliploides do camarão-branco litopenaeus vannamei (decapoda, penaeidae)

without practical results so far. Protocols used in biotechnological cultured aquatic organisms aimed at increasing growth rates and disease resistance, have been studied and perfected. Among the available techniques, the application of chromosomal manipulation, although still nascent, is presented as a tool aimed at mitigating ecological and economical issues in shrimp farming. The polyploidization artificial method already employed in fish and shellfish, has been widely researched for use in farmed shrimp. Some limitations of this method of expansion in shrimp refer to a better knowledge of cytogenetic aspects, the level of sexual dimorphism and performance in growing conditions. To contribute on some of these issues, the present study aimed to characterize cytogenetic species Litopenaeus vannamei (Decapoda) and Artemia franciscana (Anostraca), analyze the effectiveness of methods for detection of ploidy, through the use of flow cytometry in processes of induction polyploidy cold thermal shock at different stages of development of newly fertilized eggs. Additionally, aimed also the qualitative and quantitative comparison of larval development between diploid and polyploid organisms, besides the identification of sexual dimorphism in L. vannamei, through geometric morphometrics. The results provide information relevant to the improvement and widespread use of biotechnological methods applied toward national productivity in shrimp farming