Performance Analysis of a Cooperative MAC Protocol of Wireless Ad Hoc Networks

Different medium access control (MAC) layer protocols, for example, IEEE 802.11 series and others are used in wireless local area networks. They have limitation in handling bulk data transfer applications, like video-on-demand, videoconference, etc. To avoid this problem a cooperative MAC protocol environment has been introduced, which enables the MAC protocol of a node to use its nearby nodes MAC protocol as and when required. We have found on various occasions that specified cooperative MAC establishes cooperative transmissions to send the specified data to the destination. In this paper we propose cooperative MAC priority (CoopMACPri) protocol which exploits the advantages of priority value given by the upper layers for selection of different paths to nodes running heterogeneous applications in a wireless ad hoc network environment. The CoopMACPri protocol improves the system throughput and minimizes energy consumption. Using a Markov chain model, we developed a model to analyse the performance of CoopMACPri protocol; and also derived closed-form expression of saturated system throughput and energy consumption. Performance evaluations validate the accuracy of the theoretical analysis, and also show that the performance of CoopMACPri protocol varies with the number of nodes. We observed that the simulation results and analysis reflects the effectiveness of the proposed protocol as per the specifications.

Spray: A Multi-Modal Localization System for Stationary Sensor Network Deployment

We present a localization system that targets rapid deployment of stationary wireless sensor networks (WSN). The system uses a particle filter to fuse measurements from multiple localization modalities, such as RF ranging, neighbor information or maps, to obtain position estimations with higher accuracy than that of the individual modalities. The system isolates different modalities into separate components which can be included or excluded independently to tailor the system to a specific scenario. We show that position estimations can be improved with our system by combining multiple modalities. We evaluate the performance of the system in both an indoor and outdoor environment using combinations of five different modalities. Using two anchor nodes as reference points and combining all five modalities, we obtain RMS (Root Mean Square) estimation errors of approximately 2.5m in both cases, while using the components individually results in errors within the range of 3.5 and 9 m.

QoS Performance Analysis of Routing Protocols in Vehicular Ad-hoc Networks

Vehicular Ad-hoc Networks (VANET), is a type of wireless ad-hoc network that aims to provide communication among vehicles. A key characteristic of VANETs is the very high mobility of nodes that result in a frequently changing topology along with the frequent breakage and linkage of the paths among the nodes involved. These characteristics make the Quality of Service (QoS) requirements in VANET a challenging issue. In this paper we characterize the performance available to applications in infrastructureless VANETs in terms of path holding time, path breakage probability and per session throughput as a function of various vehicle densities on road, data traffic rate and number of connections formed among vehicles by making use of table-driven and on-demand routing algorithms. Several QoS constraints in the applications of infrastructureless VANETs are observed in the results obtained.

Desmistificando a convergência : o caso da radiodifusão no celular

Analisa as implicações técnicas, sociais e legais da oferta, por operadoras de telefonia celular, de serviço de acesso a conteúdo produzido por emissoras de radiodifusão e outras produtoras, nas modalidades transmissão ao vivo (streaming) e descarga de conteúdo sob-demanda (ou download de vídeo on-demand).

Cell Reprogramming, IPS Limitations, and Overcoming Strategies in Dental Bioengineering

8 p.

Maryland Turtles

Since McCauley's 1945 publication, now out of print, on the "Turtles of Maryland," little has appeared on this interesting component of Maryland's vertebrate fauna. This work is thus an attempt to bring up to date the information that has accumulated during the interval. Each species has been treated in a similar vein regarding name, drawing, distribution, life history and biology. Additional information not usually found in texts or manuals has been added, especially that on folklore, uses and commercial value. Comments on environs, identification, species which should not be considered part of the turtle fauna, and the five known introduced species are included. A key to all the material and introduced species and subspecies is presented for the first time. The distribution maps have been made following the present limits of a species' known range. Dots were not used to illustrate ranges since so many species can and do move about readily. Those species whose ranges are expected to be larger than presently known are so indicated. These species and specimens thereof from the latter areas should be kept arid called to the attention of qualified personnel. All levels from the high school to scientist will find material of interest herein. (PDF contains 43 pages)

Dense, efficient chip-to-chip communication at the extremes of computing

The scalability of CMOS technology has driven computation into a diverse range of applications across the power consumption, performance and size spectra. Communication is a necessary adjunct to computation, and whether this is to push data from node-to-node in a high-performance computing cluster or from the receiver of wireless link to a neural stimulator in a biomedical implant, interconnect can take up a significant portion of the overall system power budget. Although a single interconnect methodology cannot address such a broad range of systems efficiently, there are a number of key design concepts that enable good interconnect design in the age of highly-scaled CMOS: an emphasis on highly-digital approaches to solving ‘analog’ problems, hardware sharing between links as well as between different functions (such as equalization and synchronization) in the same link, and adaptive hardware that changes its operating parameters to mitigate not only variation in the fabrication of the link, but also link conditions that change over time. These concepts are demonstrated through the use of two design examples, at the extremes of the power and performance spectra.

A novel all-digital clock and data recovery technique for high-performance, high density interconnect has been developed. Two independently adjustable clock phases are generated from a delay line calibrated to 2 UI. One clock phase is placed in the middle of the eye to recover the data, while the other is swept across the delay line. The samples produced by the two clocks are compared to generate eye information, which is used to determine the best phase for data recovery. The functions of the two clocks are swapped after the data phase is updated; this ping-pong action allows an infinite delay range without the use of a PLL or DLL. The scheme's generalized sampling and retiming architecture is used in a sharing technique that saves power and area in high-density interconnect. The eye information generated is also useful for tuning an adaptive equalizer, circumventing the need for dedicated adaptation hardware.

On the other side of the performance/power spectra, a capacitive proximity interconnect has been developed to support 3D integration of biomedical implants. In order to integrate more functionality while staying within size limits, implant electronics can be embedded onto a foldable parylene (‘origami’) substrate. Many of the ICs in an origami implant will be placed face-to-face with each other, so wireless proximity interconnect can be used to increase communication density while decreasing implant size, as well as facilitate a modular approach to implant design, where pre-fabricated parylene-and-IC modules are assembled together on-demand to make custom implants. Such an interconnect needs to be able to sense and adapt to changes in alignment. The proposed array uses a TDC-like structure to realize both communication and alignment sensing within the same set of plates, increasing communication density and eliminating the need to infer link quality from a separate alignment block. In order to distinguish the communication plates from the nearby ground plane, a stimulus is applied to the transmitter plate, which is rectified at the receiver to bias a delay generation block. This delay is in turn converted into a digital word using a TDC, providing alignment information.

High-coherence hybrid Si/III-V semiconductor lasers

The relentlessly increasing demand for network bandwidth, driven primarily by Internet-based services such as mobile computing, cloud storage and video-on-demand, calls for more efficient utilization of the available communication spectrum, as that afforded by the resurging DSP-powered coherent optical communications. Encoding information in the phase of the optical carrier, using multilevel phase modulationformats, and employing coherent detection at the receiver allows for enhanced spectral efficiency and thus enables increased network capacity. The distributed feedback semiconductor laser (DFB) has served as the near exclusive light source powering the fiber optic, long-haul network for over 30 years. The transition to coherent communication systems is pushing the DFB laser to the limits of its abilities. This is due to its limited temporal coherence that directly translates into the number of different phases that can be imparted to a single optical pulse and thus to the data capacity. Temporal coherence, most commonly quantified in the spectral linewidth Δν, is limited by phase noise, result of quantum-mandated spontaneous emission of photons due to random recombination of carriers in the active region of the laser.

In this work we develop a generically new type of semiconductor laser with the requisite coherence properties. We demonstrate electrically driven lasers characterized by a quantum noise-limited spectral linewidth as low as 18 kHz. This narrow linewidth is result of a fundamentally new laser design philosophy that separates the functions of photon generation and storage and is enabled by a hybrid Si/III-V integration platform. Photons generated in the active region of the III-V material are readily stored away in the low loss Si that hosts the bulk of the laser field, thereby enabling high-Q photon storage. The storage of a large number of coherent quanta acts as an optical flywheel, which by its inertia reduces the effect of the spontaneous emission-mandated phase perturbations on the laser field, while the enhanced photon lifetime effectively reduces the emission rate of incoherent quanta into the lasing mode. Narrow linewidths are obtained over a wavelength bandwidth spanning the entire optical communication C-band (1530-1575nm) at only a fraction of the input power required by conventional DFB lasers. The results presented in this thesis hold great promise for the large scale integration of lithographically tuned, high-coherence laser arrays for use in coherent communications, that will enable Tb/s-scale data capacities.

Design and evaluation of an optical switching node

[EN]For a good development of elastic optical networks, the design of flexible optical switching nodes is required. This work analyses the previously proposed flexible architectures and, based on the most appropriate, which is the Architecture on Demand (AoD), proposes a specific configuration of the node that includes spatial and spectral switching and the wavelength conversion functionality with a low blocking probability and the minimum amount of modules; the characteristics of the traffic that the designed node is able to cope with are specified in the last chapter. An evaluation of the designed node is also done, and, compared to the other architectures, it is shown that the Architecture on Demand gives better results than others and that it has a higher potential for future developments.

Design and implementation of a cloud computing adoption decision tool: Generating a cloud road

Migrating to cloud computing is one of the current enterprise challenges. This technology provides a new paradigm based on "on-demand payment" for information and communication technologies. In this sense, the small and medium enterprise is supposed to be the most interested, since initial investments are avoided and the technology allows gradual implementation. However, even if the characteristics and capacities have been widely discussed, entry into the cloud is still lacking in terms of practical, real frameworks. This paper aims at filling this gap, presenting a real tool already implemented and tested, which can be used as a cloud computing adoption decision tool. This tool uses diagnosis based on specific questions to gather the required information and subsequently provide the user with valuable information to deploy the business within the cloud, specifically in the form of Software as a Service (SaaS) solutions. This information allows the decision makers to generate their particular Cloud Road. A pilot study has been carried out with enterprises at a local level with a two-fold objective: To ascertain the degree of knowledge on cloud computing and to identify the most interesting business areas and their related tools for this technology. As expected, the results show high interest and low knowledge on this subject and the tool presented aims to readdress this mismatch, insofar as possible. Copyright: © 2015 Bildosola et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Correlação da resposta clínica à vardenafila em dois regimes terapêuticos com parâmetros vasculares e escore de risco cardiovascular em hipertensos com disfunção erétil vasculogênica

A disfunção erétil (DE) tem alta prevalência entre hipertensos e tem sido considerada marcador precoce de risco cardiovascular. A presença e gravidade da DE bem como a resposta clínica aos inibidores da fosfodiesterase tipo 5 (PDE5) parecem depender da biodisponibilidade do óxido nítrico (NO) endotelial e da extensão da doença aterosclerótica. O objetivo deste estudo foi avaliar a resposta clínica da vardenafila usada em dois regimes terapêuticos em hipertensos com DE vasculogênica e sem doença cardiovascular maior, correlacionando a gravidade da DE e a eficácia da vardenafila com dados antropométricos, laboratoriais, escore de risco cardiovascular e parâmetros vasculares funcionais e estruturais. A resposta clínica à vardenafila nos dois regimes foi avaliada conforme o percentual de respostas positivas à questão 3 do Perfil do Encontro Sexual (PES3). Os parâmetros vasculares considerados foram a espessura médio-intimal (EMI) da carótida comum, a dilatação mediada pelo fluxo (DMF) da artéria braquial e a dilatação nitrato-mediada (DNM). Foram incluídos 100 homens hipertensos com idade entre 50 e 70 anos, sendo 74 portadores de DE vasculogênica e 26 com função erétil normal que serviram de grupo controle. Nos pacientes com DE, o índice de massa corporal, relação cintura-quadril, EMI da carótida, níveis séricos de triglicerídeos, colesterol total e LDL foram significativamente maiores que no grupo controle. Após o uso de vardenafila on demand (fase 1), os pacientes com mais de 50% de respostas positivas ao PES3 ou 50% de respostas afirmativas e um incremento de 6 pontos ou mais em relação ao Índice Internacional de Função Erétil (IIEF-FE) basal e/ou resposta positiva a Questão de Avaliação Global (QAG), foram considerados respondedores. O escore do IIEF-FE basal se correlacionou negativamente com a EMI da carótida (r=-0,48, P<0,001) e com o escore de Framingham (r= -0,41, P<0,001) no grupo com DE. Houve forte correlação positiva entre a resposta clínica à vardenafila com a DMF (r= 0,70, P<0,001), que não se observou entre o sub-grupo de diabéticos. Os 35 pacientes considerados não-respondedores na fase 1 foram randomizados e, em desenho duplo-cego, receberam vardenafila ou placebo diariamente durante cinco semanas, podendo usar 10 mg de vardenafila uma hora antes da atividade sexual (fase2). Houve resposta clínica positiva em 38,8% dos que receberam a vardenafila na fase 2 e esta resposta se correlacionou com a frequência sexual (r= 0,68, P<0,01) e com o escore de Framingham (r= -0,65, P<0,01), com a EMI da carótida (r= -0,61, P=0,01) e com o LDL-colesterol (r= -0,64, P<0,01). A vardenafila foi bem tolerada em ambos os regimes terapêuticos. Concluímos que nessa amostra de hipertensos, a gravidade da DE foi relacionada a parâmetros vasculares estruturais (EMI), enquanto a resposta clínica à vardenafila on demand foi mais diretamente dependente da função vascular momentânea (DMF). Houve benefício na utilização de vardenafila diariamente com o objetivo de resgatar a eficácia do inibidor quanto à melhora do desempenho sexual. A falta de eficácia clínica ao inibidor da PDE5 em ambos os regimes terapêuticos pode servir como marcador clínico que identifica homens hipertensos com um risco cardiovascular aumentado.

O Programa de Saúde da Família em Jardim Cinco Marias: um cenário de êxitos e ruínas inseridos na proposta de reorientação da atenção básica à saúde

Esta dissertação consiste num estudo em forma de narrativa que permite percorrer o cotidiano das práticas dos profissionais de saúde, tendo como pano de fundo o Programa de Saúde da Família, do Ministério da Saúde. A opção pelo PSF se fundamenta no fato de que, desde sua institucionalização, ele vem assumindo relevância no discurso político, institucional e social, no âmbito da política nacional de saúde, o SUS concebido como uma estratégia importante para reorganização do modelo assistencial em saúde. Todo modelo inovador requer descobertas inevitáveis, em que idas e vindas, sucessos e fracassos nos permitem traçar um cenário das situações vivenciadas. O campo de estudo foi o Programa de Saúde da Família em Jardim Cinco Marias, localizado no bairro de Guaratiba, Zona Oeste do município do Rio de Janeiro. O processo de implantação do PSF nessa comunidade trouxe algumas inquietações a respeito das questões de demanda, trabalho e organização da equipe de saúde da família e do relacionamento e das expectativas da população em relação ao PSF. A partir desse olhar, o presente trabalho pretende apontar problemas e discutir questões relacionadas a esses três maiores temas, à luz da bibliografia apresentada.

40 Gbit/s optical communication system

The University of Bristol is studying the feasibility of deploying 40 Gbit/s optical time division multiplexed (OTDM) transmission networks to support new telecommunication services such the Internet and video-on-demand systems. Among the functional blocks being considered in the project are the optical pulse sources, signal multiplexers and demultiplexers, clock recovery subsystems, signal detection and dispersion accommodation methods.

Ink-jet printing for patterning engineering surfaces

This work explored the use of industrial drop-on-demand inkjet printing for masking steel surfaces on engineering components, followed by chemical etching, to produce patterned surfaces. A solvent-based ink was printed on to mild steel samples and the influences of substrate topography and substrate temperature were investigated. Contact angle measurements were used to assess wettability. Regular patterns of circular spots (∼60 /on diameter) and more complex mask patterns were printed. Variation of the substrate temperature had negligible effect on the final size of the printed drops or on the resolution achieved. Colored optical interference fringes were observed on the dried ink deposits and correlated with film thickness measurements by whitelight interferometry.

Electrotactile touch surface by using transparent graphene

In this work we present a flexible Electrostatic Tactile (ET) surface/display realized by using new emerging material graphene. The graphene is transparent conductor which successfully replaces previous solution based on indium-thin oxide (ITO) and delivers more reliable solution for flexible and bendable displays. The electrostatic tactile surface is capable of delivering programmable, location specific tactile textures. The ET device has an area of 25 cm 2, and consists of 130 μm thin optically transparent (>76%) and mechanically flexible structure overlaid unobtrusively on top of a display. The ET system exploits electro vibration phenomena to enable on-demand control of the frictional force between the user's fingertip and the device surface. The ET device is integrated through a controller on a mobile display platform to generate fully programmable range of stimulating signals. The ET haptic feedback is formed in accordance with the visual information displayed underneath, with the magnitude and pattern of the frictional force correlated with both the images and the coordinates of the actual touch in real time forming virtual textures on the display surface (haptic virtual silhouette). To quantify rate of change in friction force we performed a dynamic friction coefficient measurement with a system involving an artificial finger mimicking the actual touch. During operation, the dynamic friction between the ET surface and an artificial finger stimulation increases by 26% when the load is 0.8 N and by 24% when the load is 1 N. © 2012 ACM.