Estudo do comportamento em fluência de juntas metálicas coladas

Juntas coladas têm se mostrado como a principal alternativa de união entre componentes fabricados em materiais distintos ou não, tendo como vantagem principal a ausência de aporte de calor e melhor distribuição de tensões. A literatura mostra que estudos anteriores foram realizados com o objetivo de caracterizar diversas propriedades associados às juntas, porém, pouco ainda se conhece sobre o comportamento dessas uniões relacionado à fluência. Os ensaios de fluência têm como principal desvantagem a baixa produtividade de resultados visto que, na maioria dos casos, os equipamentos aptos a realizarem este tipo de teste ensaiam apenas um corpo de prova por vez. Neste caso, o tratamento estatístico é baseado em uma pequena quantidade de resultados, reduzindo a confiabilidade na predição do comportamento em fluência. O Laboratório de Adesão e Aderência (LAA/UERJ/IPRJ) desenvolveu o equipamento pneumático de fluência (EPF) capaz de realizar dez ensaios simultâneos com parâmetros distintos. Este trabalho investiga o comportamento de juntas de cisalhamento simples (SLJ) compostas por substratos metálicos colados com adesivo epóxi e poliuretano. As juntas foram fabricadas em conformidade a norma ASTM D 1002, seguindo procedimento de preparo RT-003/08 TMC/CENPES/PETROBRAS. Os resultados mostram que, para projetos onde esteja prevista utilização das juntas durante longos períodos de tempo sob carregamento, conhecer apenas suas tensões médias de ruptura não é o suficiente para garantir a segurança do empreendimento. É proposto um modelo inicial do comportamento sob fluência de juntas coladas.

Estudo do efeito da adição de poli(glicol etilênico-b-glicol propilênico) na formação de dispersões aquosas poliuretânicas à base de poli(glicol propilênico)

Foram produzidas dispersões aquosas não-poluentes e inovadoras de poli(uretano-uréia) à base de poli(glicol propilênico) (PPG) e de copolímeros em bloco, poli(glicol etilênicob-glicol propilênico), (EG-b-PG) com teor de 7% de unidades de glicol etilênico. Os poli(uretano-uréia)s foram preparados, em duas etapas, pelo método do prepolímero. Na primeira etapa, foram obtidos anionômeros, sintetizados em massa, à base do copolímero EG-bPG, PPG, ácido dimetilol propiônico (DMPA) (gerador dos sítios aniônicos) e diisocianato de isoforona (IPDI). Ainda na primeira etapa, os grupos carboxílicos do DMPA foram submetidos à neutralização com trietilamina (TEA). Na segunda etapa, foi realizada a dispersão do prepolímero anionômero e, em seguida, foi conduzida a reação de extensão de cadeia com a hidrazina (HYD). Nas diferentes formulações, foram variadas a razão NCO/OH e as proporções de PPG e do copolímero em bloco EG-b-PG. Além disso, foram obtidas dispersões aquosas programadas para teores de sólidos de 40 e 50%. As dispersões foram avaliadas quanto ao teor de sólidos totais, tamanho médio de partícula e viscosidade. Os filmes, obtidos por vazamento das dispersões, foram avaliados quanto à absorção de água, termogravimetria (TG) e propriedades mecânicas (ensaio de tração). Os filmes vazados e os monômeros foram caracterizados por espectrometria na região de infravermelho (FTIR) As dispersões obtidas se mostraram adequadas para serem aplicadas como revestimento para madeira, metais e vidro

Aspectos clínico-epidemiológicos e microbiológicos de processos infecciosos causados por Corynebacterium spp em pacientes de centro de referência oncológico Rio de Janeiro, Brasil

Os resultados permitiram a redação de quatro artigos. Aspectos microbiológicos e clínicos de corinebacterioses em pacientes com câncer observados durante cinco anos foram descritos no Artigo 1. No Artigo 2 foram apresentados casos de bacteremia causados por corinebactérias invasivas não toxigênicas em dois períodos com intervalo de sete anos. As infecções em pacientes com câncer por C. diphtheriae, causando casos clínicos atípicos foram descritas no Artigo 3, além do estudo dos principais fatores de virulência de uma cepa de C. diphtheriae isolada de infecção associada ao cateter de nefrostomia foi descrita no Artigo 4. Resumidamente no Artigo 1, além dos aspectos clínico-epidemiológicos foram avaliados os perfis de resistência aos antimicrobianos e o potencial de virulência dos micro-organismos. Em cinco anos, 932 amostras de corinebactérias, com perfis de resistência aos antimicrobianos testados, foram isoladas de pacientes com câncer. As espécies predominantes foram Corynebacterium amycolatum (44,7%), Corynebacterium minutissimum (18,3%) e Corynebacterium pseudodiphtheriticum (8,5%). O uso de catéteres de longa permanência e a neutropenia, foram às condições importantes para infecção por corinebactérias. As doenças de base mais comuns foram os tumores sólidos. Pacientes hospitalizados apresentaram risco seis vezes maior de morrer, quando relacionadas às taxas de mortalidade com 30 dias (RC= 5,5; IC 95%= 1,15-26,30; p= 0,033). As bacteremias (Artigo 2) causadas por corinebactérias foram observadas em dois períodos: 2003-2004 (n=38) e de 2012-2013 (n=24). As espécies multirresistentes C. amycolatum e Corynebacterium jeikeium foram os principais responsáveis pelos quadros de bacteremia. Havia 34 pacientes com tumores sólidos e 28 pacientes com doenças linfoproliferativas, sendo que 21 deles apresentavam neutropenia e 54 utilizavam cateter venoso central. Em 41 pacientes havia infecção relacionada ou associada aos dispositivos intravasculares. Os pacientes com bacteremia responderam ao tratamento com vancomicina após a remoção do cateter. O comportamento agressivo da neoplasia, o tempo de internação hospitalar e o uso de CVC aumentaram o risco de bacteremias por Corynebacterium spp. No Artigo 3, 17 casos de infecções atípicas causadas por Corynebacterium diphtheriae foram diagnosticadas de 1996 a 2013. A incidência de C. diphtheriae correspondeu a 15,8 casos/100.000 admissões, 465 vezes maior que a incidência de difteria na população brasileira. Sintomas toxêmicos foram observados em nove pacientes, embora quadros de difteria clássica e endocardite não fossem observados. O perfil eletroforético em campo pulsado (PFGE) demonstrou um perfil de distribuição endêmica, apesar de haver dois casos de pacientes com o mesmo perfil eletroforético sugerindo transmissão relacionada aos cuidados à saúde. A adesão em superfícies bióticas e abióticas e produção de biofilme em cateter de poliuretano (Artigo 4) foi demonstrada em C. diphtheriae não toxigênico no sítio de inserção do cateter de nefrostomia. Os dados desses artigos permitiram concluir que (i) diferentes espécies de corinebactérias multirresistentes foram capazes de causar infecções em pacientes com câncer, incluindo bacteremias; (ii) C. diphtheriae foi capaz de causar infecções graves em indivíduos imunocomprometidos, incluindo infecções relacionadas ao uso de dispositivos invasivos em populações de risco, tais como pacientes com câncer.

Propriedades adesivas a substratos abióticos e bióticos, invasão e indução de apoptose celular de Corynebacterium pseudodiphtheriticum

A ocorrência de fenótipos multirresistentes de Corynebacterium pseudodiphtheriticum e sua associação a infecções graves, com elevada mortalidade em pacientes imunocomprometidos, aliados ao escasso conhecimento da virulência e patogenia destas infecções, motivou esta pesquisa, que teve como objetivo investigar mecanismos de virulência e resistência microbiana deste agente entre pacientes de um hospital universitário brasileiro. Um total de 113 amostras de C. pseudodiphtheriticum identificadas por métodos bioquímicos convencionais e sistema API-Coryne isoladas de pacientes de diferentes grupos etários. Os micro-organismos eram, em sua maioria, relacionados a infecções no trato respiratório (27,45%), urinário (29,20%) e sitios intravenosos (18,60%) e cerca de 32,70% das amostras foram provenientes de pacientes com pelo menos uma das condições predisponentes: insuficiência renal; transplante renal, tuberculose em paciente HIV+, câncer, cirrose hepática, hemodiálise e uso de cateter. As amostras testadas revelaram-se multirresistentes sendo a maioria resistente à oxacilina, eritromicina e clindamicina. A adesão das cepas ao poliestireno e ao poliuretano indicou o envolvimento de hidrofobicidade da superfície celular na fase inicial da formação de biofilmes. O crescimento subsequente conduziu à formação de microcolônias, agregados bacterianos densos incorporados na matriz exopolimérica rodeada por espaços vazios, típica de biofilmes maduros. Adicionalmente, a interação do micro-organismo com fibrinogênio e fibronectina humana indica o envolvimento destes componentes séricos na formação de biofilme, sugerindo a participação de diferentes adesinas neste processo e a capacidade deste agente formar biofilme in vivo. A afinidade por esses componentes e a formação de biofilme podem contribuir para o estabelecimento e disseminação da infecção no hospedeiro. Adicionalmente, as cepas de C. pseudodiphtheriticum isoladas de pacientes com infecções localizadas (ATCC10700/Pharyngitis) e sistêmicas (HHC1507/Bacteremia) exibiram um padrão de aderência agregativa-like a células HEp-2, caracterizado por aglomerados de bactérias com aparência de um "empilhado de tijolos". Através do teste FAS e ensaios de interação na presença de inibidores de citoesqueleto, demonstramos o envolvimento da polimerização de actina na internalização das cepas testadas. A internalização bacteriana e rearranjo do citoesqueleto pareceu ser parcialmente desencadeado pela ativação da tirosina-quinase. Finalmente, C. pseudodiphtheriticum foi capaz de sobreviver no ambiente intracelular e embora não tenha demonstrado capacidade de replicar intracelularmente, células HEp-2 foram incapazes de eliminar o patógeno completamente no ambiente extracelular no período de 24 horas. Todas as cepas estudadas foram capazes de induzir apoptose em células epiteliais 24 horas pós-infecção evidenciada pelo aumento significativo no número de células mortas e pela ocorrência de alterações nucleares reveladas através dos métodos de coloração pelo azul Trypan, pelo DAPI e microscopia electrônica de transmissão. Alterações morfológicas incluindo a vacuolização, a fragmentação nuclear e a formação de corpos apoptóticos foram observadas neste período. A citometria de fluxo demonstrou ainda uma diminuição significativa no tamanho das células infectadas e a utilização de dupla marcação (iodeto de propídio / anexina V) permitiu a detecção da ocorrência de necrose e apoptose tardia. Em conclusão, o conhecimento de tais características contribuiu para a compreensão de mecanismos envolvidos no aumento da frequência de infecções graves com elevada mortalidade em pacientes no ambiente hospitalar, por C. pseudodiphtheriticum, um patógeno rotineiramente subestimado em países em desenvolvimento.

Artificial Habitats for Fisheries Enhancement in the Australian Region

This paper outlines developments over about 20 years in the construction of and ecological research on artificial reefs, fish aggregation devices (FAD's), and other artificial habitats designed to enhance fish populations and fisheries in the Australian region (including New Zealand and Papua New Guinea). Work was initially carried out on multicomponent reefs using a variety of waste materials, as well as some specially constructed concrete and steel structures. Later studies concentrated on single-component reefs, again mainly using waste materials. Although no definitive conclusions were reached on the relative effectiveness of the different materials used, waste motor vehicle tires and derelict ships were generally judged to be the best all-around materials for single-component reef construction in sheltered estuarine and offshore marine environments, respectively, in this region. FAD's comprising polyvinylchloride pipe sparbuoys (or in some areas polyurethane foam floats) attached to railroad car wheel anchors by polyethylene rope and chain, and supporting attractor drapes of synthetic mesh webbing, also provedtobegenerallysuccessfulin thisarea. Overall conclusions for the Australian region include the predominant use of waste materials in artificial reef construction, which has been primarily aimed at recreational fisheries enhancement; the successful use of FAD's for both recreational and commercial fisheries enhancement; the need for further and better planned research into and monitoring of the effectiveness of both of these enhancement methods; and the need for future research into the effectiveness of unfished "artificial habitat reserves" in enhancing fisheries production from surrounding fished areas.

应用原生动物群落评价石油废水对燕山区水系的影响

北京燕山地区的水系——周口店河、东沙河、丁家洼河、西沙河、大石河中游受到石油废水和生活污水的影响。作者在5条河流同步采用载玻片法、PFU(Polyurethane Foam Unit)法和传统的浮游生物沉淀法收集原生动物群落。对群落的种类组成、多样性指数、群集过程(S_(eq)、G、T_(90％))等参数进行了测定。3种方法都能监测出周口店河有严重的毒性效应,载玻片法和PFU法能监测出含石油的废水在东沙河逐渐净化的过程,PFU法能最终判断出西沙河的有机污染比丁家洼河大。因此这5条河流的污染程度是依大石河、

Collapse of a composite beam made from ultra high molecular-weight polyethylene fibres

Hot-pressed laminates with a [0/90]48 lay-up, consisting of 83% by volume of ultra high molecular-weight polyethylene (UHMWPE) fibres, and 17% by volume of polyurethane (PU) matrix, were cut into cantilever beams and subjected to transverse end-loading. The collapse mechanisms were observed both visually and by X-ray scans. Short beams deform elastically and collapse plastically in longitudinal shear, with a shear strength comparable to that observed in double notch, interlaminar shear tests. In contrast, long cantilever beams deform in bending and collapse via a plastic hinge at the built-in end of the beam. The plastic hinge is formed by two wedge-shaped microbuckle zones that grow in size and in intensity with increasing hinge rotation. This new mode of microbuckling under macroscopic bending involves both elastic bending and shearing of the plies, and plastic shear of the interface between each ply. The double-wedge pattern contrasts with the more usual parallel-sided plastic microbuckle that occurs in uniaxial compression. Finite element simulations and analytical models give additional insight into the dominant material and geometric parameters that dictate the collapse response of the UHMWPE composite beam in bending. Detailed comparisons between the observed and predicted collapse responses are used in order to construct a constitutive model for laminated UHMWPE composites. © 2013 Elsevier Ltd.

Studies on the restoration succession of PFU microbial communities in a pilot-scale microcosm

In order to imitate the restoration succession process of natural water ecosystem, a laboratory microcosm system of constant-flow-restoration was designed and established. A eutrophycation lake, Lake Donghu, was selected as the subject investigated. Six sampling stations were set on the lake, among which the water of station IV was natural clean water, and others were polluted with different degrees. Polyurethane foam unit microbial communities, which had colonized in the stations for a month, were collected from these stations and placed in their respective microcosms, using clean water of station IV to gradually replace the water of these microcosms. In this process, the healthy community in clean water continuously replaced the damaged communities in polluted water, the restoration succession of the damaged communities was characterized by weekly determination of several functional and structural community parameters, including species number (S), diversity index (DI), community pollution value (CPV), heterotrophy index (HI), and similarity coefficient. Cluster analysis based on similarity coefficient was used to compare the succession discrepancies of these microbial communities from different stations. The ecological succession of microbial communities during restoration was investigated by the variable patterns of these parameters, and based on which, the restoration standards of these polluted stations were suggested in an ecological sense. That was, while being restored, the water of station 0 (supereutrophycation) should be substituted with natural clean water by 95%; station I (eutrophycation), more than 90%; station II (eutrophycation), more than 85%; station III (eutrophycation), about 85%; station V (mesoetitrophycation), less than 50%. The effects of the structural and functional parameters in monitoring and assessing ecological restoration are analyzed and compared. (C) 2007 Elsevier Ltd. All rights reserved.

Development of the microbial communities in Lake Donghu in relation to water quality

There is increasing recognition that protozoa is very useful in monitoring and evaluating water ecological healthy and quality. In order to study the relationship between structure and function of protozoan communities and water qualities, six sampling stations were set on Lake Donghu, a hypereutrophic subtropical Chinese lake. Microbial communities and protists sampling from the six stations was conducted by PFU (Polyurethane foam unit) method. Species number (S), diversity index (DI), percentage of phytomastigophra, community pollution value (CPV), community similarity and heterophy index (HI) were mensurated. The measured indicators of water quality included total phosphorus (TP), dissolved oxygen (DO), Chemical oxygen demand (COD), NH4 (+), NO2 (-) and NO3-. Every month water samples from stations I, II, III, IV were chemically analyzed for a whole year, Among the chemically analyzed stations, station I was the most heavily polluted, station II was the next, stations III and IV had similar pollution degrees. The variable tendencies of COD, TP, NH3, NO2-, NO3-, and DO during the year was approximately coincident among the six stations. Analysis from the community parameters showed that the pollution of station 0 was much more serious than others, and station V was the most slight. Of the community parameters, CPV and HI were sensitive in reflecting the variables of the water quality. Community similarity index was also sensitive in dividing water qualities and the water quality status of different stations could be correctly classified by the cluster analysis. DI could reflect the tendency of water quality gradient, species number and percentage of Phytomastigophora was not obvious in indicating the water quality gradient.

Monitoring of organochlorine pesticides using PFU csystems in Yunnan lakes and rivers, China

Polyurethane foam unit (PFU) systems were collected from 11 lakes and three rivers in the Yunnan Plateau, China and, the PFU extrusion liquids, were analyzed for organochlorine pesticides (OCPs) by gas chromatography with electron capture detection (GCECD). The concentrations of pp'-DDE, HCB and HCHs were undetectable to 1.86 mu g l(-1) (mean 0.27 mu g l(-1)), undetectable to 0.72 mu g l(-1) (mean 0.11 mu g l(-1)), and 0.24-21.95 mu g l(-1) (mean 7.39 mu g l(-1)) respectively in lakes; and those in rivers were undetectable to 0.23 mu g l(-1) (mean 0.08 mu g l(-1)), 0.68-2.93 mu g l(-1) (mean 1.70 mu g l(-1)), and 2.71-37.56 mu g l(-1) (mean 17.01 mu g l(-1)) respectively. Notably, some residue levels of OCPs exceeded the US National Recommended Water Quality Criteria, implying Yunnan has levels of OCPs potentially harmful to human health. Further, the contamination by OCPs showed an obvious spatial distribution pattern. Amongst the lakes, Dianchi, Xingyun, Lugu and Yangzonghai had the highest OCP levels dominated by beta-HCH, whereas among rivers, Nujiang and Lancang Rivers had the highest contents of OCPs dominated by alpha-HCH. This demonstrates that HCHs are the predominant contaminants and some point sources of HCHs may still exist in Yunnan. The pollution levels in Yunnan were compared with other studies, suggesting the PFU method is suitable for long-term on-line monitoring of trace OCPs in aquatic ecosystems. Therefore, continuous studies monitoring OCPs in lakes and rivers are needed to further understand the future trend of contamination. (c) 2006 Elsevier Ltd. All rights reserved.

Effects of seasonal succession and water pollution on the protozoan community structure in an eutrophic lake

The purpose of the research is to study the seasonal succession of protozoa community and the effect of water quality on the protozoa community to characterize biochemical processes occurring at a eutrophic Lake Donghu, a large shallow lake in Wuhan City, China. Samples of protozoa communities were obtained monthly at three stations by PFU (polyurethane foam unit) method over a year. Synchronously, water samples also were taken from the stations for the water chemical quality analysis. Six major variables were examined in a principal component analysis (PCA), which indicate the fast changes of water quality in this station I and less within-year variation and a comparatively stable water quality in stations II and III. The community data were analyzed using multivariate techniques, and we show that clusters are rather mixed and poorly separated, suggesting that the community structure is changing gradually, giving a slight merging of clusters form the summer to the autumn and the autumn to the winter. Canonical correspondence analysis (CCA) was used to infer the relationship between water quality variables and phytoplankton community structure, which changed substantially over the survey period. From the analysis of cluster and CCA, coupled by community pollution value (CPV), it is concluded that the key factors driving the change in protozoa community composition in Lake Donghu was water qualities rather than seasons. (c) 2006 Elsevier Ltd. All rights reserved.

Use of microbial community to evaluate performance of a wetland system in treating Pb/Zn mine drainage

The performance of a wetland system in treating lead (Pb)/zinc (Zn) mine drainage was evaluated by using the polyurethane foam unit (PFU) microbial community (method), which has been adopted by China as a standardized procedure for monitoring water quality. The wetland system consisted of four cells with three dominant plants: Typha latifolia, Phragmites australis and Paspalum distichum. Physicochemical characteristics [pH, EC, content of total suspended solid (TSS) and metals (Pb, Zn, Cd, and Cu)] and PFU microbial community in water samples had been investigated from seven sampling sites. The results indicated that the concentrations of Pb, Zn, Cd, Cu, and TSS in the mine drainage were gradually reduced from the inlet to the outlet of the wetland system and 99%, 98%, 75%, 83%, and 68% of these metals and TSS respectively, had been reduced in concentration after the drainage passed through the wetland system. A total of 105 protozoan species were identified, the number of protozoa species and the diversity index (DI) gradually increased, while the heterotrophic index (HI) gradually decreased from the inlet to the outlet of the wetland system. The results indicated that DI, HI, and total number species of protozoa could be used as biological indicators indicating the improvement of water quality.

Monitoring organochlorine pesticides and polychlorinated biphenyls in Baiyangdian Lake using microbial communities

We used polyurethane foam units (PFUs) to collect persistent organic pollutants (POPs) from four sites in Baiyangdian Lake in July 2003. Following extraction from the PFUs, relative concentrations of seven organochlorine pesticides (OCPs) and ten polychlorinated biphenyls (PCBs) were determined by gas chromatography. OCPs and PCBs were detected in the microbial communities from all the four sampling stations. In terms of the total concentration of POPs (OCPs+ PCBs), two river estuary stations had more POP (18.45 mu g/L and 9.77 mu g/L) than the two mid-lake stations (4.75 mu g/L and 5.21 mu g/L), indicating that Baiyangdian Lake was significantly impacted by inflow from the Fu River and Baigou River.

The temporal and spatial distribution, composition and abundance of Protozoa in Chaohu Lake, China: Relationship with eutrophication

Systematic investigations into the temporal and spatial distribution, composition and abundance of protozoa in two regions with different trophic levels in Chaohu Lake, a large, shallow and highly eutrophic freshwater lake in China, were conducted during 2002-2003. A total of 114 species of protozoa, including phytomastigophorans, zoomastigophorans, amoebae and ciliates, were identified from 120 polyurethane foam unit (PFU) samples exposed at four stations and from various types of natural substrates. Of the 114 taxa, 36 core species were found on PFU substrates and 23 of these were found on natural ones. Protozoan abundance and chemical physical parameters at nine sampling stations, four in the western lake and five in the eastern part, indicate trophic gradient changes along the lake. Seasonal variations in the species composition of major groups at littoral PFU sampling stations illustrate the effect of a severe algal bloom on the protozoan community structure. Temporal and spatial distributions of individual abundance as functions of water temperature and trophic status were revealed. This study demonstrates again that the PFU artificial substrate method samples protozoan communities more effectively than routine natural substrate methods. (c) 2005 Elsevier GmbH. All rights reserved.

Use of PFU protozoan community structural and functional characteristics in assessment of water quality in a large, highly polluted freshwater lake in China

Structural and functional parameters of protozoan communities colonizing on PFU (polyurethane foam unit) artificial substrate were assessed as indicators of water quality in the Chaohu Lake, a large, shallow and highly polluted freshwater lake in China. Protozoan communities were sampled 1, 3, 6, 9 and 14 days after exposure of PFU artificial substrate in the lake during October 2003. Four study stations with the different water quality gradient changes along the lake were distinguishable in terms of differences in the community's structural (species richness, individual abundance, etc.) and functional parameters (protozoan colonization rates on PFU). The concentrations of TP, TN, COD and BOD as the main chemical indicators of pollution at the four sampling sites were also obtained each year during 2002-2003 for comparison with biological parameters. The results showed that the species richness and PFU colonization rate decreased as pollution intensity increased and that the Margalef diversity index values calculated at four sampling sites also related to water quality. The three functional parameters based on the PFU colonization process, that is, S-eq, G and T-90%, were strongly related to the pollution status of the water. The number of protozoan species colonizing on PFU after exposure of 1 to 3 days was found to give a clear comparative indication of the water quality at the four sampling stations. The research provides further evidence that the protozoan community may be utilized effectively in the assessment of water quality and that the PFU method furnishes rapid, cost-effective and reliable information that may be useful for measuring responses to pollution stress in aquatic ecosystems.