Concentrations of brominated and chlorinated contaminants in adipose tissue of polar bears (Ursus maritimus) between 1991-2007

Adipose tissue was sampled from the western Hudson Bay (WHB) subpopulation of polar bears at intervals from 1991 to 2007 to examine temporal trends of PCB and OCP levels both on an individual and sum-contaminant basis. We also determined levels and temporal trends of emerging polybrominated diphenyl ethers (PBDEs), hexabromocyclododecane (HBCD), polybrominated biphenyls (PBBs) and other current-use brominated flame retardants. Over the 17-year period, sum DDT (and p,p'-DDE, p,p'-DDD, p,p'-DDT) decreased (-8.4%/year); alpha-hexachlorocyclohexane (alpha-HCH) decreased (-11%/year); beta-HCH increased ( + 8.3%/year); and sum PCB and sum chlordane (CHL), both contaminants at highest concentrations in all years (>1 ppm), showed no distinct trends even when compared to previous data for this subpopulation dating back to 1968. Some of the less persistent PCB congeners decreased significantly (-1.6%/year to -6.3%/year), whereas CB153 levels tended to increase (+ 3.3%/year). Parent CHLs (c-nonachlor, t-nonachlor) declined, whereas non-monotonic trends were detected for metabolites (heptachlor epoxide, oxychlordane). sum chlorobenzene, octachlorostyrene, sum mirex, sum MeSO2-PCB and dieldrin did not significantly change. Increasing sum PBDE levels (+13%/year) matched increases in the four consistently detected congeners, BDE47, BDE99, BDE100 and BDE153. Although no trend was observed, total-(alpha)-HBCD was only detected post-2000. Levels of the highest concentration brominated contaminant, BB153, showed no temporal change. As long-term ecosystem changes affecting contaminant levels may also affect contaminant patterns, we examined the influence of year (i.e., aging or "weathering" of the contaminant pattern), dietary tracers (carbon stable isotope ratios, fatty acid patterns) and biological (age/sex) group on congener/metabolite profiles. Patterns of PCBs, CHLs and PBDEs were correlated with dietary tracers and biological group, but only PCB and CHL patterns were correlated with year. DDT patterns were not associated with any explanatory variables, possibly related to local DDT sources. Contaminant pattern trends may be useful in distinguishing the possible role of ecological/diet changes on contaminant burdens from expected dynamics due to atmospheric sources and weathering.

Design and development of automatic visual inspection system for PCB manufacturing

Inspection of solder joints has been a critical process in the electronic manufacturing industry to reduce manufacturing cost, improve yield, and ensure product quality and reliability. This paper proposes two inspection modules for an automatic solder joint classification system. The “front-end” inspection system includes illumination normalisation, localisation and segmentation. The “back-end” inspection involves the classification of solder joints using the Log Gabor filter and classifier fusion. Five different levels of solder quality with respect to the amount of solder paste have been defined. The Log Gabor filter has been demonstrated to achieve high recognition rates and is resistant to misalignment. This proposed system does not need any special illumination system, and the images are acquired by an ordinary digital camera. This system could contribute to the development of automated non-contact, non-destructive and low cost solder joint quality inspection systems.

Estimation of reference values for dioxin, furan, and PCB congener concentrations for the Australian population

Population-representative data for dioxin and PCB congener concentrations are available for the Australian population based on measurements in age- and gender-specific serum pools.1 Such data provide a basis for characterizing the mean concentrations of these compounds in the population, but do not provide information on the inter-individual variation in serum concentrations that may exist in the population within an age- and gender-specific group. Such variation may occur due to inter-individual differences in long-term exposure levels or elimination rates. Reference values are estimates of upper percentiles (often the 95th percentile) of measured values in a defined population that can be used to evaluate data from individuals in the population in order to identify concentrations that are elevated, for example, from occupational exposures.2 The objective of this analysis is to estimate reference values corresponding to the 95th percentile (RV95s) for Australia on an age-specific basis for individual dioxin-like congeners based on measurements in serum pools from Toms and Mueller (2010).

Design of coreless PCB transformers for power and signal isolation in a modular ADC system for power quality data acquisition

Available industrial energy meters offer high accuracy and reliability, but are typically expensive and low-bandwidth, making them poorly suited to multi-sensor data acquisition schemes and power quality analysis. An alternative measurement system is proposed in this paper that is highly modular, extensible and compact. To minimise cost, the device makes use of planar coreless PCB transformers to provide galvanic isolation for both power and data. Samples from multiple acquisition devices may be concentrated by a central processor before integration with existing host control systems. This paper focusses on the practical design and implementation of planar coreless PCB transformers to facilitate the module's isolated power, clock and data signal transfer. Calculations necessary to design coreless PCB transformers, and circuits designed for the transformer's practical application in the measurement module are presented. The designed transformer and each application circuit have been experimentally verified, with test data and conclusions made applicable to coreless PCB transformers in general.

Acumulação de compostos organoclorados (PCBs, DDTs e HCB) em tecido hepático de delfinídeos (Cetacea, Mammalia) do Estado do Rio de Janeiro

No decorrer das últimas décadas a pesquisa relacionada à contaminação de organismos marinhos por compostos organoclorados (OCs) se intensificou aliada à utilização de algumas espécies como sentinelas da qualidade ambiental quanto aos poluentes orgânicos. Dentre essas espécies, podem-se destacar os cetáceos, animais que entre outras características possuem grande longevidade, alta porcentagem lipídica em seus tecidos e são predadores de topo de cadeia trófica, tendendo assim a acumular altos níveis de OCs em seus tecidos. O presente estudo teve por objetivo determinar as concentrações de OCs de origem industrial e agrícola (PCBs, HCB e DDTs) em tecido hepático de oito diferentes espécies de cetáceos delfinídeos pertencentes a três distintas áreas oceânicas do Estado do Rio de Janeiro, são elas a região costeira, a plataforma continental e a região oceânica. A determinação foi realizada em cromatógrafo a gás (GC - Agilent 6890) conectado a um espectrômetro de massa (MS - Agilent 5973). Os valores de DDTs (1263617272 ng.g -1 lip.) e PCBs (7648877288 ng.g -1 lip.) aqui encontrados estão entre os mais altos já reportados para o táxon. Em todas as áreas observou-se uma predominância do ΣPCB, seguida do ΣDDT e HCB, em níveis que refletem o caráter fortemente industrial da região analisada. Entre os PCBs, a maior contribuição advém dos hexabifenis, seguida dos hepta e pentabifenis, sendo os congêneres 153, 138 e 180 os principais em todas as áreas. A razão p,pDDE/ΣDp,pDDT foi alta em todas as regiões (0,9), refletindo um input antigo do poluente na área. Foram realizadas correlações entre as concentrações de OCs e os parâmetros biológicos das espécies, como idade, sexo e comprimento total. A transferência placentária de OCs foi analisada em dois pares de fêmea-feto de Sotalia guianensis, mostrando uma maior transferência dos compostos com menor log Kow. Como esperado, foi encontrada uma diferença significativa no perfil de contaminação entre as espécies das diferentes regiões, relacionada à proximidade da fonte, características espécie-específicas e ao arranjo trófico das espécies.

O uso do boto-cinza (Sotalia guianensis) como sentinela da poluição continental por compostos organoclorados (DDT, PCB, HCH, HCB e Mirex) em baías costeiras do Estado do Rio de Janeiro

Concentrações de compostos organoclorados (DDTs, PCBs, HCHs, Mirex e HCB) foram determinadas em camadas externas e internas do tecido adiposo subcutâneo de 17 botos-cinza (Sotalia guianensis) da região Sudeste do Brasil. Não houve diferenças estatísticas significativas entre os estratos, relativo aos 37 compostos determinados, assim como ΣDDT, ΣPCB, ΣHCH, e as razões p,p-DDE/ΣDDT e ΣDDT/ΣPCB. Entretanto, foram observadas diferenças significativas nas concentrações de alguns compostos organoclorados de animais encalhados ou capturados acidentalmente quando comparados com animais biopsiados remotamente, sendo assim as comparações entre esses dois conjuntos de dados, devem ser vistas com cuidado. No presente estudo, as concentrações dos compostos organoclorados foram determinadas em biópsias de botos-cinza obtidas de 2007 a 2009, nas baías de Sepetiba (n=13) e Ilha Grande (n=11), Sudeste do Brasil. As concentrações (ng/g de lipídio) variaram de PCB; de

Potential Impact of PCB's on Bluefish, Pomatomus saltatrix, Management

Since 1979, anglers along the U.S. Atlantic coast have landed by weight more bluefish, Pomatomus saltatrix, than any other marine species. A fishery management plan has been developed jointly by three fishery management councils and the Atlantic States Marine Fisheries Commission to preserve the bluefish resource. Major objectives of the plan include prevention of recruitment overfishing and reduction in waste of bluefish. In 1985, a Federal survey found PCB concentrations in larger bluefish (over 500 mm fork length) that exceeded the U.S. Food and Drug Administration tolerance level of 2 parts per million. Harvest strategies are presented in this article to protect the reproductive capability of bluefish while minimizing human health risks associated with dietary intake of PCB's.

Low-cost PCB-integrated polymer waveguide sensor for gas detection

An optical waveguide sensor formed directly on low-cost PCB substrates is presented for the first time. The device integrates polymer waveguides functionalized with chemical dyes, photonic and electronic components and allows multiple-gas detection. © 2011 OSA.