973 resultados para Physical Condition
Resumo:
Background: Self-affirmation (i.e., focusing on a valued aspect of the self-concept) can promote health behaviour change. This study aimed to see if self-affirmation increased physical activity (PA) regardless of threat level presented in health messages. Methods: Sixty-eight participants were randomly allocated to condition in a 2 (self-affirmation, no affirmation) x 2 (high threat, low threat) between-participants design. Participants completed the Godin Leisure-Time Exercise Questionnaire at baseline and one week later to assess PA. Findings: A two-way ANCOVA with affirmation condition and threat level as predictor variables, controlling for baseline PA, was performed on follow up PA. Baseline PA was a significant predictor (F(1,63) = 399.63, p<0.001) and the main effect of affirmation condition approached significance (F(1,63) = 3.55, p=0.06). There were no other significant effects. Discussion: This study provides further evidence that self-affirmation can increase PA, but found no interaction between self-affirmation and threat level presented in health messages.
Resumo:
Tree islands, a prominent feature in both the marl prairie and ridge and slough landscapes of the Everglades, are sensitive to large-scale restoration actions associated with the Comprehensive Everglades Restoration Plan (CERP) authorized by the Water Resources Development Act (WRDA) 2000 to restore the south Florida ecosystem. More specifically, changes in hydrologic regimes at both local and landscape scales are likely to affect the internal water economy of islands, which in turn will influence plant community structure and function. To strengthen our ability to assess the “performance” of tree island ecosystems and predict how these hydrologic alterations would translate into ecosystem response, an improved understating of reference conditions of vegetation structure and function, and their responses to major stressors is important. In this regard, a study of vegetation structure and composition in relation to associated physical and biological processes was initiated in 2005 with initial funding from Everglades National Park and South Florida Water Management District (SFWMD). The study continued through 2011 with funding from US Army Corps of Engineers (USACOE) (Cooperative Agreement # W912HZ-09-2-0019 Modification No.: P00001).
Resumo:
Corvio sandstone is a ~20 m thick unit (Corvio Formation) that appears in the top section of the Frontada Formation (Campoó Group; Lower Cretaceous) located in Northern Spain in the southern margin of the Basque-Cantabrian Basin. Up to 228 plugs were cored from four 0.3 x 0.2 x 0.5 m blocks of Corvio sandstone, to perform a comprehensive characterization of the physical, mineralogical, geomechanical, geophysical and hydrodynamic properties of this geological formation, and the anisotropic assessment of the most relevant parameters. Here we present the first data set obtained on 53 plugs which covers (i) basic physical and chemical properties including density, porosity, specific surface area and elementary analysis (XRF - CHNS); (ii) the curves obtained during unconfined and confined strengths tests, the tensile strengths, the calculated static elastic moduli and the characteristic stress levels describing the brittle behaviour of the rock; (iii) P- and S-wave velocities (and dynamic elastic moduli) and their respective attenuation factors Qp and Qs, electrical resistivity for a wide range of confining stress; and (iv) permeability and transport tracer tests. Furthermore, the geophysical, permeability and transport tests were additionally performed along the three main orthogonal directions of the original blocks, in order to complete a preliminary anisotropic assessment of the Corvio sandstone.
Resumo:
The successful, efficient, and safe turbine design requires a thorough understanding of the underlying physical phenomena. This research investigates the physical understanding and parameters highly correlated to flutter, an aeroelastic instability prevalent among low pressure turbine (LPT) blades in both aircraft engines and power turbines. The modern way of determining whether a certain cascade of LPT blades is susceptible to flutter is through time-expensive computational fluid dynamics (CFD) codes. These codes converge to solution satisfying the Eulerian conservation equations subject to the boundary conditions of a nodal domain consisting fluid and solid wall particles. Most detailed CFD codes are accompanied by cryptic turbulence models, meticulous grid constructions, and elegant boundary condition enforcements all with one goal in mind: determine the sign (and therefore stability) of the aerodynamic damping. The main question being asked by the aeroelastician, ``is it positive or negative?'' This type of thought-process eventually gives rise to a black-box effect, leaving physical understanding behind. Therefore, the first part of this research aims to understand and reveal the physics behind LPT flutter in addition to several related topics including acoustic resonance effects. A percentage of this initial numerical investigation is completed using an influence coefficient approach to study the variation the work-per-cycle contributions of neighboring cascade blades to a reference airfoil. The second part of this research introduces new discoveries regarding the relationship between steady aerodynamic loading and negative aerodynamic damping. Using validated CFD codes as computational wind tunnels, a multitude of low-pressure turbine flutter parameters, such as reduced frequency, mode shape, and interblade phase angle, will be scrutinized across various airfoil geometries and steady operating conditions to reach new design guidelines regarding the influence of steady aerodynamic loading and LPT flutter. Many pressing topics influencing LPT flutter including shocks, their nonlinearity, and three-dimensionality are also addressed along the way. The work is concluded by introducing a useful preliminary design tool that can estimate within seconds the entire aerodynamic damping versus nodal diameter curve for a given three-dimensional cascade.
Resumo:
The main drivers for the development and evolution of Cyber Physical Systems (CPS) are the reduction of development costs and time along with the enhancement of the designed products. The aim of this survey paper is to provide an overview of different types of system and the associated transition process from mechatronics to CPS and cloud-based (IoT) systems. It will further consider the requirement that methodologies for CPS-design should be part of a multi-disciplinary development process within which designers should focus not only on the separate physical and computational components, but also on their integration and interaction. Challenges related to CPS-design are therefore considered in the paper from the perspectives of the physical processes, computation and integration respectively. Illustrative case studies are selected from different system levels starting with the description of the overlaying concept of Cyber Physical Production Systems (CPPSs). The analysis and evaluation of the specific properties of a sub-system using a condition monitoring system, important for the maintenance purposes, is then given for a wind turbine.
Resumo:
The main purpose of this pilot study was to investigate the possible influence of genetic polymorphisms of the hOGG1 (Ser326Cys) gene in DNA damage and repair activity by 8-oxoguanine DNA glycosylase 1 (OGG1 enzyme) in response to 16 weeks of combined physical exercise training. Thirty-two healthy Caucasian men (40-74 years old) were enrolled in this study. All the subjects were submitted to a training of 16 weeks of combined physical exercise. The subjects with Ser/Ser genotype were considered as wild-type group (WTG), and Ser/Cys and Cys/Cys genotype were analysed together as mutant group (MG). We used comet assay in conjunction with formamidopyrimidine DNA glycoslyase (FPG) to analyse both strand breaks and FPG-sensitive sites. DNA repair activity were also analysed with the comet assay technique. Our results showed no differences between DNA damage (both strand breaks and FPG-sensitive sites) and repair activity (OGG1) between genotype groups (in the pre-training condition). Regarding the possible influence of genotype in the response to 16 weeks of physical exercise training, the results revealed a decrease in DNA strand breaks in both groups, a decrease in FPG-sensitive sites and an increase in total antioxidant capacity in the WTG, but no changes were found in MG. No significant changes in DNA repair activity was observed in both genotype groups with physical exercise training. This preliminary study suggests the possibility of different responses in DNA damage to the physical exercise training, considering the hOGG1 Ser326Cys polymorphism.
Resumo:
This thesis will address cultural and physical place reclamation, at the ambiguous intersection of ‘city’ and nature.’ By creating a juxtaposed sequence of multi-scalar interventions, which challenge the conventional boundaries of architecture, and landscape architecture; in order to make commonplace a new dynamic threshold condition in Richmond, Virginia. At its core, this thesis is an attempt at place-making on a site which has become ‘no place.’ This concept will be manifest via a landscape park on Mayo Island in Richmond, anchored by a community retreat center, and architectural follies along a constructed path. The interventions will coincide with value of place in historical Richmond: an integrated, socially desegregated waterfront hinge; a social nexus of inherent change, at the point which the river itself changes at the fall line.
Resumo:
International audience
Resumo:
As the semiconductor industry struggles to maintain its momentum down the path following the Moore's Law, three dimensional integrated circuit (3D IC) technology has emerged as a promising solution to achieve higher integration density, better performance, and lower power consumption. However, despite its significant improvement in electrical performance, 3D IC presents several serious physical design challenges. In this dissertation, we investigate physical design methodologies for 3D ICs with primary focus on two areas: low power 3D clock tree design, and reliability degradation modeling and management. Clock trees are essential parts for digital system which dissipate a large amount of power due to high capacitive loads. The majority of existing 3D clock tree designs focus on minimizing the total wire length, which produces sub-optimal results for power optimization. In this dissertation, we formulate a 3D clock tree design flow which directly optimizes for clock power. Besides, we also investigate the design methodology for clock gating a 3D clock tree, which uses shutdown gates to selectively turn off unnecessary clock activities. Different from the common assumption in 2D ICs that shutdown gates are cheap thus can be applied at every clock node, shutdown gates in 3D ICs introduce additional control TSVs, which compete with clock TSVs for placement resources. We explore the design methodologies to produce the optimal allocation and placement for clock and control TSVs so that the clock power is minimized. We show that the proposed synthesis flow saves significant clock power while accounting for available TSV placement area. Vertical integration also brings new reliability challenges including TSV's electromigration (EM) and several other reliability loss mechanisms caused by TSV-induced stress. These reliability loss models involve complex inter-dependencies between electrical and thermal conditions, which have not been investigated in the past. In this dissertation we set up an electrical/thermal/reliability co-simulation framework to capture the transient of reliability loss in 3D ICs. We further derive and validate an analytical reliability objective function that can be integrated into the 3D placement design flow. The reliability aware placement scheme enables co-design and co-optimization of both the electrical and reliability property, thus improves both the circuit's performance and its lifetime. Our electrical/reliability co-design scheme avoids unnecessary design cycles or application of ad-hoc fixes that lead to sub-optimal performance. Vertical integration also enables stacking DRAM on top of CPU, providing high bandwidth and short latency. However, non-uniform voltage fluctuation and local thermal hotspot in CPU layers are coupled into DRAM layers, causing a non-uniform bit-cell leakage (thereby bit flip) distribution. We propose a performance-power-resilience simulation framework to capture DRAM soft error in 3D multi-core CPU systems. In addition, a dynamic resilience management (DRM) scheme is investigated, which adaptively tunes CPU's operating points to adjust DRAM's voltage noise and thermal condition during runtime. The DRM uses dynamic frequency scaling to achieve a resilience borrow-in strategy, which effectively enhances DRAM's resilience without sacrificing performance. The proposed physical design methodologies should act as important building blocks for 3D ICs and push 3D ICs toward mainstream acceptance in the near future.
Resumo:
Travail dirigé présenté en vue de l'obtention du grade de maîtrise en sciences infirmières, option expertise-conseil
Resumo:
Travail dirigé présenté en vue de l'obtention du grade de maîtrise en sciences infirmières, option expertise-conseil
Resumo:
Objective: To assess the effectiveness of 12 weekly physical therapy sessions for urinary incontinence (UI) compared with a control intervention, for reducing the number of UI episodes measured with the 7-day bladder diary, at 3 months and 1 year postrandomization. Methods: A single parallel-group randomized controlled trial was conducted at one outpatient public health center, in postmenopausal women aged 55 years and over with osteoporosis or low bone density and UI. Women were randomized to physical therapy (PT) for UI or osteoporosis education. The primary outcome measure was number of leakage episodes on the 7-day bladder diary, assessed at baseline, after treatment and at 1 year. The secondary outcome measures included the pad test and disease-specific quality of life and self-efficacy questionnaires assessed at the same timepoints. Results: Forty-eight women participated (24 per group). Two participants dropped out of each group and one participant was deceased before 3-month follow-up. Intention-to-treat analysis was undertaken. At 3 months and 1 year, there was a statistically significant difference in the number of leakage episodes on the 7-day bladder diary (3 mo: P = 0.04; 1 y: P = 0.01) in favor of the PT group. The effect size was 0.34 at 1 year. There were no harms reported. Conclusions: After a 12-week course of PT once per week for UI, PT group participants had a 75% reduction in weekly median number of leakage episodes, whereas the control group's condition had no improvement. At 1 year, the PT group participants maintained this improvement, whereas the control group's incontinence worsened.
Resumo:
Objective: To assess the effectiveness of 12 weekly physical therapy sessions for urinary incontinence (UI) compared with a control intervention, for reducing the number of UI episodes measured with the 7-day bladder diary, at 3 months and 1 year postrandomization. Methods: A single parallel-group randomized controlled trial was conducted at one outpatient public health center, in postmenopausal women aged 55 years and over with osteoporosis or low bone density and UI. Women were randomized to physical therapy (PT) for UI or osteoporosis education. The primary outcome measure was number of leakage episodes on the 7-day bladder diary, assessed at baseline, after treatment and at 1 year. The secondary outcome measures included the pad test and disease-specific quality of life and self-efficacy questionnaires assessed at the same timepoints. Results: Forty-eight women participated (24 per group). Two participants dropped out of each group and one participant was deceased before 3-month follow-up. Intention-to-treat analysis was undertaken. At 3 months and 1 year, there was a statistically significant difference in the number of leakage episodes on the 7-day bladder diary (3 mo: P = 0.04; 1 y: P = 0.01) in favor of the PT group. The effect size was 0.34 at 1 year. There were no harms reported. Conclusions: After a 12-week course of PT once per week for UI, PT group participants had a 75% reduction in weekly median number of leakage episodes, whereas the control group's condition had no improvement. At 1 year, the PT group participants maintained this improvement, whereas the control group's incontinence worsened.
Resumo:
Films of silk fibroin (SF) and sodium alginate (SA) blends were prepared by solution casting technique. The miscibility of SF and SA in those blends was evaluated and scanning electron microscopy (SEM) revealed that SF/SA 25/75 wt.% blends underwent microscopic phase separation, resulting in globular structures composed mainly of SF. X-ray diffraction indicated the amorphous nature of these blends, even after a treatment with ethanol that turned them insoluble in water. Thermal analyses of blends showed the peaks of degradation of pristine SF and SA shifted to intermediate temperatures. Water vapor permeability, swelling capacity and tensile strength of SF films could be enhanced by blending with SA. Cell viability remained between 90 and 100%, as indicated by in vitro cytotoxicity test. The SF/SA blend with self-assembled SF globules can be used to modulate structural and mechanical properties of the final material and may be used in designing high performance wound dressing.
Resumo:
The practice of physical activities contributes to reducing the risk of chronic diseases and improves sleep patterns in the elderly. This research aimed to investigate the association between insomnia symptoms and daytime nap and the participation in physical leisure activities in elderly community residents. Data from the Studies Network of the Fragility in Brazilian Elderly (Campinas site), were used. Information from 689 elderly was analyzed, regarding sociodemographic characterization, physical leisure activity, occurrence of daytime napping and its duration, symptoms of insomnia and use of sleep medication. A significant association was found between the practice of walking and the daytime nap of short duration. Studies indicate that a short nap can benefit the quality of sleep and health of the elderly. Therefore, promoting the practice of walking can be a nursing intervention that favors the sleep patterns of the elderly.