Substitution-Newton-Raphson method applied to the modeling of a vapour compression refrigeration system using different representations of the thermodynamic properties of R-134a

This paper gives a detailed presentation of the Substitution-Newton-Raphson method, suitable for large sparse non-linear systems. It combines the Successive Substitution method and the Newton-Raphson method in such way as to take the best advantages of both, keeping the convergence features of the Newton-Raphson with the low requirements of memory and time of the Successive Substitution schemes. The large system is solved employing few effective variables, using the greatest possible part of the model equations in substitution fashion to fix the remaining variables, but maintaining the convergence characteristics of the Newton-Raphson. The methodology is exemplified through a simple algebraic system, and applied to a simple thermodynamic, mechanical and heat transfer modeling of a single-stage vapor compression refrigeration system. Three distinct approaches for reproducing the thermodynamic properties of the refrigerant R-134a are compared: the linear interpolation from tabulated data, the use of polynomial fitted curves and the use of functions derived from the Helmholtz free energy.

Experimental validation of a 3-D vision-based measurement system applied to robot calibration

One of the problems that slows the development of off-line programming is the low static and dynamic positioning accuracy of robots. Robot calibration improves the positioning accuracy and can also be used as a diagnostic tool in robot production and maintenance. A large number of robot measurement systems are now available commercially. Yet, there is a dearth of systems that are portable, accurate and low cost. In this work a measurement system that can fill this gap in local calibration is presented. The measurement system consists of a single CCD camera mounted on the robot tool flange with a wide angle lens, and uses space resection models to measure the end-effector pose relative to a world coordinate system, considering radial distortions. Scale factors and image center are obtained with innovative techniques, making use of a multiview approach. The target plate consists of a grid of white dots impressed on a black photographic paper, and mounted on the sides of a 90-degree angle plate. Results show that the achieved average accuracy varies from 0.2mm to 0.4mm, at distances from the target from 600mm to 1000mm respectively, with different camera orientations.

Large-scale production and purification of recombinant protein from an insect cell/baculovirus system in Erlenmeyer flasks: application to the chicken poly(ADP-ribose) polymerase catalytic domain

A simple and inexpensive shaker/Erlenmeyer flask system for large-scale cultivation of insect cells is described and compared to a commercial spinner system. On the basis of maximum cell density, average population doubling time and overproduction of recombinant protein, a better result was obtained with a simpler and less expensive bioreactor consisting of Erlenmeyer flasks and an ordinary shaker waterbath. Routinely, about 90 mg of pure poly(ADP-ribose) polymerase catalytic domain was obtained for a total of 3 x 109 infected cells in three liters of culture

Impacts of increased levels of wind penetration on the Electric Power System of the Åland Islands

The application of VSC-HVDC technology throughout the world has turned out to be an efficient solution regarding a large share of wind power in different power systems. This technology enhances the overall reliability of the grid by utilization of the active and reactive power control schemes which allows to maintain frequency and voltage on busbars of the end-consumers at the required level stated by the network operator. This master’s thesis is focused on the existing and planned wind farms as well as electric power system of the Åland Islands. The goal is to analyze the wind conditions of the islands and appropriately predict a possible production of the existing and planned wind farms with a help of WAsP software program. Further, to investigate the influence of increased wind power it is necessary to develop a simulation model of the electric grid and VSC-HVDC system in PSCAD and examine grid response to different wind power production cases with respect to the grid code requirements and ensure the stability of the power system.

Steps towards more effective antitrust system in EU – The Damages Directive’s effect on victim’s right to compensation for antitrust harm

Kaikkien kansalaisten ja yritysten, jotka kärsivät vahinkoa Euroopan Unionin kilpailusääntöjen (SEUT 101 ja 102 artiklan) rikkomisen vuoksi, on voitava vaatia korvauksia vahingon aiheuttaneelta osapuolelta. Euroopan unionin tuomioistuin on ratkaisuillaan Courage ja Manfredi vahvistanut vahinkoa kärsineen oikeuden saada korvausta kärsimästään vahingosta. Suomessa kilpailuoikeudellista vahingonkorvausta koskeva oikeuskäytäntö on ollut vähäistä, vaikkakin viime aikoina on annettu muutama merkittävä vahingonkorvausratkaisu, näistä kenties tunnetuimpana asvalttikartelliratkaisu. Kilpailuoikeuden rikkomisesta vahinkoa kärsineet saavat kuitenkin vain harvoin korvausta kärsimästään vahingosta, mikä on ollut seurausta erilaisista lainsäädännöllisistä ja menettelyistä johtuvista esteistä jäsenvaltioiden säännöissä. Komission pitkään kestänyt lainsäädäntöhanke EU:n kilpailuoikeuden täytäntöönpanojärjestelmän selkeyttämiseksi päättyi marraskuussa 2014, kun Euroopan parlamentin ja neuvoston direktiivi tietyistä säännöistä, joita sovelletaan jäsenvaltioiden ja Euroopan unionin kilpailuoikeuden rikkomisen johdosta kansallisen lainsäädännön nojalla nostettuihin vahingonkorvauskanteisiin (2014/104/ EU) hyväksyttiin. Direktiivi julkaistiin Euroopan unionin virallisessa lehdessä 5. joulukuuta 2014, ja jäsenvaltioilla on 27.12.2016 asti aikaa implementoida direktiivi osaksi kansallista lainsäädäntöä. Direktiivin tavoitteena on EU:n kilpailusääntöjen tehokas täytäntöönpano sekä kilpailuoikeuden julkisoikeudellisen ja yksityisoikeudellisen täytäntöönpanon selkeyttäminen. Lisäksi direktiivi pyrkii varmistamaan, että vahingonkärsijät voivat saada täyden korvauksen kärsimästään vahingosta, sekä poistamaan esteitä ja pienentämään kustannuksia vahingon todistamisessa, samalla harmonisoiden eri jäsenmaissa toimivien yritysten oikeussuojan tasoa. Tarkastelen pro gradu –tutkielmassani kilpailuoikeudellisen vahingonkorvauksen kehitystä sekä uuden EU:n vahingonkorvausdirektiivin vaikutuksia erityisesti vahingonkärsijän näkökulmasta, eli sitä kuinka direktiivi vaikuttaa vahingonkärsijän mahdollisuuteen saada korvausta kärsimästään vahingosta, joka johtuu EU:n kilpailusääntöjen rikkomisesta. Lisäksi tarkastelen lyhyesti direktiivin tuomia muutoksia Suomen lainsäädäntöön. Tutkielmani loppupäätelmä on, että vaikka vahingonkorvausdirektiivi ei täydellisesti paranna vahingonkärsijän asemaa, se selkeyttää monella tavalla kilpailuoikeudellisten vahingonkorvauskanteiden nykyistä tilaa, ja saattaa tietyssä määrin rohkaista vahingonkärsijiä hakemaan korvausta kärsimästään vahingosta.

Lämminvesivaraajan ohjaus automaatiolla aurinkosähköä tuottavassa kotitaloudessa

Hajautettu sähköntuotanto aurinkopaneeleilla on Suomessa kasvussa. Kotitalouksiin asennettujen aurinkopaneelijärjestelmien määrä kasvaa jatkuvasti, mutta suuri osa tuotetusta sähköenergiasta syötetään sähköverkkoon. Tämä johtuu aurinkosähkön tuotannon painottumisesta kesäpäiviin, jolloin kotitalouksien kulutus on pienimmillään. Suurin hyöty itse tuotetusta energiasta saadaan kuitenkin käyttämällä se tuotantokohteessa, jolla minimoidaan energiansiirto sähköverkon ja kotitalouden rajapinnassa. Siirtämällä kotitalouden suurimpia kuormia aurinkosähkön mukaan ohjatuksi, voidaan saavuttaa merkittäviä parannuksia tuotetun sähkön omakäyttöasteessa. Helpoimmillaan tämä onnistuu kellokytkimellä, joka ajoittaa kulutuksen parhaimman tuotannon ajalle. Tämä ei kuitenkaan poista ongelmaa tilanteissa, jossa aurinkosähkön tuotanto on häiriintynyt esimerkiksi pilvisyyden takia aamupäivällä ja huipputuotanto saavutetaan vasta iltapäivän puolella. Saatavilla on jo useita järjestelmiä, jotka ohjaavat kodin laitteita tuotannon mukaisesti. Suuri osa näistä järjestelmistä on kuitenkin suunniteltu toimimaan vain tuotetun energiamäärän mukaisesti, ottamatta huomioon kotitaloudessa olevaa muuta, automaation piiriin kuulumatonta kulutusta. Tässä kandidaatin työssä vertaillaan sähköenergian eri mittaustapoja ja niiden vaikutusta siirretyn energian laskennalliseen määrään. Lisäksi työssä tutkitaan lämminvesivaraajan kuormanohjausta käyttäen termostaatti-, kellokytkin- ja logiikkaohjausta. Työssä esitelty logiikkaohjaus hyödyntää siirretyn energian mittausta sähköverkon ja kotitalouden rajapinnassa, ottaen automaattisesti huomioon myös talouden muun kulutuksen. Työssä esitellään myös esimerkkilaitteisto, jolla suunniteltu logiikka voidaan toteuttaa.

Liberal versus neo-developmental convention to growth: why has Brazil shown a poor performance since the 1980s?

The main goal of our paper is to provide analytical arguments to explain why Brazil has not been able to restore its long-term capacity for economic growth, especially compared with its economy in the 1950-1979 period (7.3 per cent per year on average) or even with a select number of emerging economies in the 1980-2010 period(6.7 per cent per year on average, against 2.3 per cent per year on average in Brazil in the same period). We build our idea of convention to growth based on the Keynesian concept of convention. For our purposes, this concept could be briefly summarized as the way in which the set of public and private economic decisions related to different objectives, such as how much to produce and invest, how much to charge for products and services, how to finance public and private debt, how to finance research and development, and so on, are indefinitely - or at least until there is no change- carried out by the political, economic and social institutions. This analytical reference can be connected to the Neo-Schumpeterian National Innovation System (NIS) concept, which emphasizes not only institutions associated with science and technology per se, but also the complex interaction among them and other institutions. In this paper we identify two conventions to long-term growth in the last three decades in Brazil: the liberal and the neo-developmental. We show that the poor performance in the Brazilian economy in terms of real GDP growth from the 1980s on can be explained by a weak coordination between short-term macroeconomic policies and long-term industrial and technological policies. This weak coordination, in turn, can be associated with the prevalence of the liberal convention from the 1990s on, which has emphasized price stabilization to the detriment of a neo-developmental strategy whose primary goal is to sustain higher rates of growth and full employment in Brazil.

The functional fit between collaborative software and work systems:Qualification of work system needs to software functionality

The study develops an approach that tries to validate software functionality to work systems needs in SMEs. The formulated approach is constructed by using a SAAS based software i.e., work collaboration service (WCS), and SMEs as the elements of study. Where the WCS’s functionality is qualified to the collaboration needs that exist in operational and project work within SMEs. For this research constructivist approach and case study method is selected because the nature of the current study requires an in depth study of the work collaboration service as well as a detailed study of the work systems within different enterprises. Four different companies are selected in which fourteen interviews are conducted to gather data pertaining. The work systems method and framework are used as a central part of the approach to collect, analyze and interpret the enterprises work systems model and the underlying collaboration needs on operational and project work. On the other hand, the functional model of the WCS and its functionality is determined from functional model analysis, software testing, documentation and meetings with the service vendor. The enterprise work system model and the WCS model are compared to reveal how work progression differs between the two and make visible unaddressed stages of work progression. The WCS functionality is compared to work systems collaboration needs to ascertain if the service will suffice the needs of the project and operational work under study. The unaddressed needs provide opportunities to improve the functionality of the service for better conformity to the needs of enterprise and work. The results revealed that the functional models actually differed in how operational and project work progressed within the stages. WCS shared similar stages of work progression apart from the stages of identification and acceptance, and progress and completion stages were only partially addressed. Conclusion is that the identified unaddressed needs such as, single point of reference, SLA and OLA inclusion etc., should be implemented or improved within the WCS at appropriate stages of work to gain better compliance of the service to the needs of the enterprise an work itself. The developed approach can hence be used to carry out similar analysis for the conformance of pre-built software functionality to work system needs with SMEs.

Message from the President of the United States, transmitting documents relative to the commencement and progress of any acts or system of retaliation upon prisoners of war, by the Governments of Great Britain and the United States. --

13th Congress, 3d session. House. Doc. no. 13.

Message from the President of the United States, transmitting documents relative to the commencement and progress of any acts or system of retaliation upon prisoners of war, by the Governments of Great Britain and the United States

13th Congress, 3d session. House. Doc. no. 13. October 28, 1814. Read, referred to the Committee on Foreign Relations. Printed by A. and G. Way

Letter from the Chairman of the Committee of Ways and Means to the Secretary of the Treasurer on the subject of a system of revenue to revive and maintain unimpaired the public credit, with the answer of the Secretary thereto. (1814)

October 18, 1814. Read, and committed to the Committee of the whole House on the report of the Committee of Ways and Means on so much of the President's message as relates to the finances of the United States.

Capacity to Attend to the Needs of Persons with Dual Diagnoses in the Criminal Justice System: Views of Mental Health and Criminal Justice Professionals

Currently, individuals with intellectual disabilities are overrepresented within the Criminal Justice System (Griffiths, Taillon-Wasmond & Smith, 2002). A primary problem within the Criminal Justice System is the lack of distinction between mental illness and intellectual disabilities within the Criminal Code. Due to this lack of distinction and the overall lack of identification procedures in the Criminal Justice System, individuals with disabilities will often not receive proper accommodations to enable them to play an equitable role in the justice system. There is increasing evidence that persons with intellectual disabilities are more likely than others to have their rights violated, not use court supports and accommodations as much as they should, and be subject to miscarriages of justice (Marinos, 2010). In this study, interviews were conducted with mental health (n=8) and criminal justice professionals (n=8) about how individuals with dual diagnosis are received in the Criminal Justice System. It was found that criminal justice professionals lack significant knowledge about dual diagnosis, including effective identification and therefore appropriate supports and accommodations. Justice professionals in particular were relatively ill-prepared in dealing effectively with this population. One finding to highlight is that there is misunderstanding between mental health professionals and justice professionals about who ought to take responsibility and accountability for this population.

The Muisca Calendar : an approximation to the timekeeping system of the ancient native people of the northeastern Andes of Colombia

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal.

Geochemistry of transition, non-transition and rare-earth elements in the surficial sediments of continental shelf of Kerala and an annex to the Cochin estuarine system

The metals present in the surface sediments have high demand on a global perspective, and the main reservoir of these elements is believed to be the ocean floor. A lot of studies on metals are going on throughout the world for its quantification and exploitation. Even though, some preliminary attempts have been made in selected areas for the quantitative study of metals in the western continental shelf of India, no comprehensive work has been reported so far. The importance of this study also lies on the fact that there has not been a proper evaluation of the impact of the Great Tsunami of 2004 on the coastal areas of the south India. In View of this, an attempt has been made to address the seasonal distribution, behavior and mechanisms which control the deposition of metals in the sediments of the western continental shelf and Cochin Estuary, an annex to this coastal marine region.Surface sediment samples were collected seasonally from two subenvironemnts of southwest coast of India, (continental shelf of Kerala and Cochin estuarine system), to estimate the seasonal distribution and geochemical behavior of non-transition, transition, rare-earth elements, Th and U. Bottom water samples were also taken from each station, and analysed for temperature, salinity and dissolved oxygen, hence the response of redox sensitive elements to oxygen minimum zone can be addressed. In addition, other sedimentary parameters such as sand, silt, clay fractions, CaCO3 and organic carbon content were also estimated to evaluate the control factors on level of metals present in the sediment. The study used different environmental data analysis techniques to evaluate the distribution and behavior of elements during different seasons. This includes environmental parameters such as elemental normalisation, enrichment factor, element excess, cerium and europium anomalies and authigenic uranium.

A HOLISTIC APPROACH TO MANUFACTURING SYSTEM DESIGN IN THE DEFENSE AEROSPACE INDUSTRY

Manufacturing has evolved to become a critical element of the competitive skill set of defense aerospace firms. Given the changes in the acquisition environment and culture; traditional “thrown over the wall” means of developing and manufacturing products are insufficient. Also, manufacturing systems are complex systems that need to be carefully designed in a holistic manner and there are shortcomings with available tools and methods to assist in the design of these systems. This paper outlines the generation and validation of a framework to guide this manufacturing system design process.