Analysis of EXCOBULLE two-phase expansion tests

analysis of a complex physical problem and the close agreement they achieved with observations. However, the following points need to be clarified. First of all the authors assume that during the initial phases of expansion, the Tayior's instability sets in due to the acceleraacceleration of lighter fluid against the more dense cold water.

Dynamic Properties Of Soils From Insitu Tests - Discussion

Various field test (namely vibration tests on blocks or plates, steady-state vibration or Rayleigh wave tests, wave propagation tests, and cyclic load tests) were conducted at a number of sites in India to determine the dynamic shear modulus, G. Data obtained at different sites are described. The values of G obtained from the different tests at a given site vary widely. The rational approach for selecting the value of G from field tests for use in the analysis and design of soil-structure interaction problems under dynamic loads must account for the factors affecting G. The suggested approach, which provides a possible answer, is suitable in cohesionless soils below the water table where it is rather difficult, if not impossible, to obtain undisturbed samples.

The genetic association between personality and major depression or bipolar disorder. A polygenic score analysis using genome-wide association data

The relationship between major depressive disorder (MDD) and bipolar disorder (BD) remains controversial. Previous research has reported differences and similarities in risk factors for MDD and BD, such as predisposing personality traits. For example, high neuroticism is related to both disorders, whereas openness to experience is specific for BD. This study examined the genetic association between personality and MDD and BD by applying polygenic scores for neuroticism, extraversion, openness to experience, agreeableness and conscientiousness to both disorders. Polygenic scores reflect the weighted sum of multiple single-nucleotide polymorphism alleles associated with the trait for an individual and were based on a meta-analysis of genome-wide association studies for personality traits including 13,835 subjects. Polygenic scores were tested for MDD in the combined Genetic Association Information Network (GAIN-MDD) and MDD2000+ samples (N=8921) and for BD in the combined Systematic Treatment Enhancement Program for Bipolar Disorder and Wellcome Trust Case-Control Consortium samples (N=6329) using logistic regression analyses. At the phenotypic level, personality dimensions were associated with MDD and BD. Polygenic neuroticism scores were significantly positively associated with MDD, whereas polygenic extraversion scores were significantly positively associated with BD. The explained variance of MDD and BD, approximately 0.1%, was highly comparable to the variance explained by the polygenic personality scores in the corresponding personality traits themselves (between 0.1 and 0.4%). This indicates that the proportions of variance explained in mood disorders are at the upper limit of what could have been expected. This study suggests shared genetic risk factors for neuroticism and MDD on the one hand and for extraversion and BD on the other.

Personality, health and lifestyle in a questionnaire family study: A comparison between highly cooperative and less cooperative families

The effect of nonresponse on health and lifestyle measures has received extensive study, showing at most relatively modest effects. Nonresponse bias with respect to personality has been less thoroughly investigated. The present study uses data from responding individuals as a proxy for the missing data of their nonresponding family members to examine the presence of nonresponse bias for personality traits and disorders as well as health and lifestyle traits. We looked at the Big Five personality traits, borderline personality disorder (BPD) features, attention-deficit/hyperactivity disorder, Anger, and several measures of health (Body Mass Index, migraine) and lifestyle (smoking, alcohol use). In general, outcomes tend to be slightly more favorable for individuals from highly cooperative families compared to individuals from less cooperative families. The only significant difference was found for BPD features (p = .001). However, the absolute difference in mean scores is very small, less than 1 point for a scale ranging from 0 to 72. In conclusion, survey data on personality, health and lifestyle are relatively unbiased with respect to nonresponse.

Career adaptability predicts subjective career success above and beyond personality traits and core self-evaluations

The Career Adapt-Abilities Scale (CAAS) measures career adaptability as a higher-order construct that integrates four psychosocial resources of employees for managing their career development: concern, control, curiosity, and confidence. The goal of the present study was to investigate the validity of the CAAS with regard to its effects on two indicators of subjective career success (career satisfaction and self-rated career performance) above and beyond the effects of employees' Big Five personality traits and core self-evaluations. Data came from a large and heterogeneous sample of employees in Australia (N=1723). Results showed that overall career adaptability positively predicted career satisfaction and self-rated career performance above and beyond the Big Five personality traits and core self-evaluations. In addition, concern and confidence positively predicted the two indicators of subjective career success. The findings provide further support for the incremental validity of the CAAS.

Older job seekers' job search intensity: The interplay of proactive personality, age and occupational future time perspective

Long-term unemployment of older people can have severe consequences for individuals, communities and ultimately economies, and is therefore a serious concern in countries with an ageing population. However, the interplay of chronological age and other individual difference characteristics in predicting older job seekers' job search is so far not well understood. This study investigated relationships among age, proactive personality, occupational future time perspective (FTP) and job search intensity of 182 job seekers between 43 and 77 years in Australia. Results were mostly consistent with expectations based on a combination of socio-emotional selectivity theory and the notion of compensatory psychological resources. Proactive personality was positively related to job search intensity and age was negatively related to job search intensity. Age moderated the relationship between proactive personality and job search intensity, such that the relationship was stronger at higher compared to lower ages. One dimension of occupational FTP (perceived remaining time left in the occupational context) mediated this moderating effect, but not the overall relationship between age and job search intensity. Implications for future research, including the interplay of occupational FTP and proactive personality, and some tentative practical implications are discussed.

Quality of ALICE SSD modules revealed by electrical tests

ALICE (A Large Ion Collider Experiment) is an experiment at CERN (European Organization for Nuclear Research), where a heavy-ion detector is dedicated to exploit the unique physics potential of nucleus-nucleus interactions at LHC (Large Hadron Collider) energies. In a part of that project, 716 so-called type V4 modules were assembles in Detector Laboratory of Helsinki Institute of Physics during the years 2004 - 2006. Altogether over a million detector strips has made this project the most massive particle detector project in the science history of Finland. One ALICE SSD module consists of a double-sided silicon sensor, two hybrids containing 12 HAL25 front end readout chips and some passive components, such has resistors and capacitors. The components are connected together by TAB (Tape Automated Bonding) microcables. The components of the modules were tested in every assembly phase with comparable electrical tests to ensure the reliable functioning of the detectors and to plot the possible problems. The components were accepted or rejected by the limits confirmed by ALICE collaboration. This study is concentrating on the test results of framed chips, hybrids and modules. The total yield of the framed chips is 90.8%, hybrids 96.1% and modules 86.2%. The individual test results have been investigated in the light of the known error sources that appeared during the project. After solving the problems appearing during the learning-curve of the project, the material problems, such as defected chip cables and sensors, seemed to induce the most of the assembly rejections. The problems were typically seen in tests as too many individual channel failures. Instead, the bonding failures rarely caused the rejections of any component. One sensor type among three different sensor manufacturers has proven to have lower quality than the others. The sensors of this manufacturer are very noisy and their depletion voltage are usually outside of the specification given to the manufacturers. Reaching 95% assembling yield during the module production demonstrates that the assembly process has been highly successful.

The Altruistic Personality.

Publicity for Oliner's book. Front cover of book.

Web crippling tests of hollow flange channel beams with flanges fastened to supports under two flange load cases

Thin-walled steel hollow flange channel beams known as LiteSteel beam (LSB) sections were developed for use as joists and bearers in various flooring systems. However, they are subjected to specific buckling and failure modes, one of them being web crippling. Despite considerable research in this area, much of the current design predictions for cold-formed steel sections are not directly applicable to LSBs. This is due to the geometry of the LSB, which consists of two closed rectangular hollow flanges, and its unique residual stress characteristics and initial geometric imperfections. Hence an experimental study was conducted to investigate the web crippling behaviour and capacities of LSBs with their flanges fastened to supports. Thirty nine web crippling tests were conducted under two flange load cases (End Two Flange (ETF) and Interior Two Flange (ITF)). Test results showed that for ETF load case the web crippling capacities increased by 50% on average while they increased by 97% for ITF load case when flanges were fastened to supports. Comparison of the ultimate web crippling capacities from tests showed that AS/NZS 4600 and AISI S100 web crippling design equations are conservative for LSB sections with flanges fastened to supports under ETF and ITF load cases. Hence new equations were proposed to determine the web crippling capacities of LSBs with flanges fastened to supports. This paper presents the details of the experimental study into the web crippling behaviour of LSB sections with their flanges fastened under ETF and ITF load cases, and the results.

Shear tests of rivet fastened rectangular hollow flange channel beams

The intermittently rivet fastened Rectangular Hollow Flange Channel Beam (RHFCB) is a new cold-formed hollow section proposed as an alternative to welded hollow flange channel beams. It is a monosymmetric channel section made by intermittently rivet fastening two torsionally rigid rectangular hollow flanges to a web plate. This process enables the end users to choose an effective combination of different web and flange plate sizes to achieve optimum design capacities. Recent research studies focused mainly on the shear behaviour of the most commonly used lipped channel beam and welded hollow flange beam sections. However, the shear behaviour of rivet fastened RHFCB has not been investigated. Therefore a detailed experimental study involving 24 shear tests was undertaken to investigate the shear behaviour and capacities of rivet fastened RHFCBs. Simply supported test specimens of RHFCB with aspect ratios of 1.0 and 1.5 were loaded at mid-span until failure. Comparison of experimental shear capacities with corresponding predictions from the current Australian cold-formed steel design rules showed that the current design rules are very conservative for the shear design of rivet fastened RHFCBs. Significant improvements to web shear buckling occurred due to the presence of rectangular hollow flanges while considerable post-buckling strength was also observed. Such enhancements to the shear behaviour and capacity were achieved with a rivet spacing of 100 mm. Improved design rules were proposed for rivet fastened RHFCBs based on the current shear design equations in AISI S100 and the direct strength method. This paper presents the details of this experimental investigation and the results.

Shear tests of rivet fastened rectangular hollow flange channel beams with web openings

The rivet-fastened rectangular hollow flange channel beam (RHFCB) is a new cold-formed hollow section proposed as an alternative to welded hollow flange steel beams. No research has been undertaken on the shear behaviour and strength of rivet fastened RHFCBs with web openings. Hence a detailed experimental study involving 30 shear tests was undertaken to investigate the shear behaviour and strength of rivet fastened RHFCBs with web openings. Experimental results showed that the current design rules are inadequate for the shear design of Rivet fastened RHFCBs with web openings. Improved design equations have been proposed for the shear strength of rivet fastened RHFCBs with web openings.

Web crippling tests of rivet fastened rectangular hollow flange channel beams under two-flange load cases

The rivet-fastened rectangular hollow flange channel beam (RHFCB) is a new cold-formed hollow section proposed as an alternative to welded hollow flange steel beams. To date, no investigation has been conducted on their web crippling behaviour and strengths. Hence an experimental study was conducted to investigate the web crippling behaviour and capacities of rivet fastened RHFCBs under End Two Flange (ETF) and Interior Two Flange (ITF) load cases. Experimental results showed that the current design rules are unconservative for rivet fastened RHFCB sections under ETF and ITF load cases. Hence new equations were proposed to determine the web crippling capacities of rivet fastened RHFCBs.

Depression, Anxiety, Psychiatric Comorbidity and Dimensions of Temperament and Personality

This study is part of the Mood Disorders Project conducted by the Department of Mental Health and Alcohol Research, National Public Health Institute, and consists of a general population survey sample and a major depressive disorder (MDD) patient cohort from Vantaa Depression Study (VDS). The general population survey study was conducted in 2003 in the cities of Espoo and Vantaa. The VDS is a collaborative depression research project between the Department of Mental Health and Alcohol Research of the National Public Health Institute and the Department of Psychiatry of the Peijas Medical Care District (PMCD) beginning in 1997. It is a prospective, naturalistic cohort study of 269 secondary-level care psychiatric out- and inpatients with a new episode of Diagnostic and Statistical Manual of Mental Disorders, 4th edition (DSM-IV) MDD. In the general population survey study, a total of 900 participants (300 from Espoo, 600 from Vantaa) aged 20 70 years were randomly drawn from the Population Register Centre in Finland. A self-report booklet, including the Eysenck Personality Inventory (EPI), the Temperament and Character Inventory Revised (TCI-R), the Beck Depression Inventory and the Beck Anxiety Inventory was mailed to all subjects. Altogether 441 participants responded (94 returned only the shortened version without TCI-R) and gave their informed consent. VDS involved screening all patients aged 20-60 years (n=806) in the PMCD for a possible new episode of DSM-IV MDD. 542 consenting patients were interviewed with a semi-structured interview (the WHO Schedules for Clinical Assessment in Neuropsychiatry, version 2.0). 269 patients with a current DSM-IV MDD were included in the study and further interviewed with semi-structured interviews to assess all other axis I and II psychiatric diagnoses. Exclusion criteria were DSM-IV bipolar I and II, schizoaffective disorder, schizophrenia or another psychosis, organic and substance-induced mood disorders. In the present study are included those 193 (139 females, 54 males) individuals who could be followed up at both 6 and 18 months, and their depression had remained unipolar. Personality was investigated with the EPI. Personality dimensions associated not only to the symptoms of depression, but also to the symptoms of anxiety among general population and in depressive patients, as well as to comorbid disorders in MDD patients, supporting the dimensional view of depression and anxiety. Among the general population High Harm Avoidance and low Self-Directedness associated moderately, whereas low extraversion and high neuroticism strongly with the depressive and anxiety symptoms. The personality dimensions, especially high Harm Avoidance, low Self-Directedness and high neuroticism were also somewhat predictive of self-reported use of health care services for psychiatric reasons, and lifetime mental disorder. Moreover, high Harm Avoidance associated with a family history of mental disorder. In depressive patients, neuroticism scores were found to decline markedly and extraversion scores to increase somewhat with recovery. The predictive value of the changes in symptoms of depression and anxiety in explaining follow-up neuroticism was about 1/3 of that of baseline neuroticism. In contrast to neuroticism, the scores of extraversion showed no dependence on the symptoms of anxiety, and the change in the symptoms of depression explained only 1/20 of the follow-up extraversion compared with baseline extraversion. No evidence was found of the scar effect during a one-year follow-up period. Finally, even after controlling for symptoms of both depression and anxiety, depressive patients had a somewhat higher level of neuroticism (odds ratio 1.11, p=0.001) and a slightly lower level of extraversion (odds ratio 0.92, p=0.003) than subjects in the general population. Among MDD patients, a positive dose-exposure relationship appeared to exist between neuroticism and prevalence and number of comorbid axis I and II disorders. A negative relationship existed between level of extraversion and prevalence of comorbid social phobia and cluster C personality disorders. Personality dimensions are associated with the symptoms of depression and anxiety. Futhermore these findings support the hypothesis that high neuroticism and somewhat low extraversion might be vulnerability factors for MDD, and that high neuroticism and low extraversion predispose to comorbid axis I and II disorders among patients with MDD.