Decomposition of trimethylamine oxide related to the use of sulfites in shrimp

Currently, sulfites are employed on board to inhibit melanosis (blackspot) on crustaceans. However, when used in excess this chemical compound not only can cause adverse reactions in SO2-sensitive individuals, but also favors the decomposition of trimethylamine oxide (TMAO) into dimethylamine (DMA) and formaldehyde (FA), thus compromising the quality of the product, which can be observed mainly through the texture change of the meat after cooking. This study was conducted to verify the increase of the contents of DMA and FA by the excessive use of sodium metabisulfite in white shrimp (Penaeus schmitti). For laboratory trials, shrimp were beheaded, washed and immersed in a 2% sodium metabisulfite solution for 10 minutes. Specimens were stored either on ice and maintained for 48 hours in refrigeration, or stored in a freezer for 48 hours. Samples were collected at intervals of 0, 24 and 48 hours, and analyzed for residual SO2, TMAO, TMA, DMA and FA. The immersion of shrimp in a 2% sodium metabisulfite for 10 minutes favored the decomposition of TMAO which greatly increased the contents of DMA and FA. The FA and DMA measured in fresh shrimp was low. Moreover, the storage of shrimp tails on ice resulted in a significant reduction of the TMA, DMA, FA and residual SO2 contents compared to the specimens under frozen storage.

Shelf life of minimally processed carrot and green pepper

The postharvest losses of horticultural products justify the use of preservation techniques. The processing not only adds value to the products, but also makes the products more convenient to the consumers. The objective of this research was to define the methodologies for the minimal processing of carrot and green pepper as to the type and intensity of the adoption of conservation techniques, and to monitor the products after processing through microbiological, physicochemical and nutritional analysis. The vegetables were washed and they were immersed in cold (7ºC) water with 100 mg L-1 free chlorine for sanitation, followed by centrifugation for 5 min. The product was put into BOPP/LDPE (biaxially orientated polypropylene/low-density polyethylene) plastic bags, which were sealed under atmospheric air, vacuum and modified atmosphere (2% O2, 10% CO2, 88% N2) and stored at 1ºC±1ºC. The approximate composition of the vegetables stayed stable during the storage period, in the three tested treatments. The contents of vitamin C for the samples of minimally processed carrot and green pepper did not present differences among treatments. The contents of beta-carotene decreased slightly during the storage period for the minimally processed carrot and green pepper. After processing, carrot and green pepper had psychrotrophic counts of 10²-10(5) and 10³-10(6) CFU g-1, respectively. Anaerobic mesophiles and total coliforms were found in green peppers, representing 1.6x10³ - 7.4x10(5) and <10.g-1 - 7.4x10(5), respectively. Total and fecal coliforms, anaerobic mesophiles and Salmonella were not found in carrots. Salmonella was not found in green pepper.

Quality of mussels cultivated and commercialized in Ubatuba, SP, Brazil: monitoration Bacillus cereus and Staphylococcus aureus growth after post-harvest processing

Aiming at improving the quality of Perna perna mussels cultivated and commercialized in Ubatuba, SP, Brazil, the growth and elimination of Staphylococcus aureus and Bacillus cereus artificially inoculated in mussels were studied. The inoculation was carried out in "in natura" and pre-cooked mussels for 30 min, and after that the mussels were kept for 10 hours at room temperature (25 ± 1 °C) and under refrigeration (7 ± 1 °C). Six thermal treatments were evaluated: three using steam (5, 10 and 15 minutes) and three in boiling water (5, 10 and 15 minutes), in order to find the best time/temperature binomial to provide pathogenic control. Yield and physical-chemical and sensory characteristics were evaluated. All thermal treatments were efficient to eliminate microorganisms in 2 logarithmic cycles. However, the boiling water treatments presented better results than the steam treatments. The physical-chemical and sensory analyses did not show statistical differences among the thermal treatments studied. The best performances were reached in the shortest times of heat exposure. Overall, the treatments in boiling water presented better results than the steam treatments.

Evaluation of temperatures in a refrigerated container for chilled and frozen food transport

The objective of this work was to monitor the operational conditions of the transport of chilled and frozen foods during delivery within cities and to evaluate the impact of the door openings on the alteration of the internal temperature of the refrigerated environment. Several temperature and pressure sensors were used in a refrigerated container with two compartments and they were installed in the refrigeration system unit and on the internal and external surfaces of the container. After the monitoring tests, it was verified that door openings during deliveries resulted in a disturbance that raised the internal temperature of the refrigerated container above values recommended for adequate conservation of the products transported. Moreover, increasing the number of door openings promoted a cumulative effect on the internal temperature, mainly in the chilled food compartment of the container. It was concluded that the refrigeration system unit presented serious limitations with regard to the maintenance of the container's internal temperature during the actual distribution routine, since it does not possess enough instantaneous capacity to restore the temperature set-point between deliveries.

Changes in guava (Psidium guajava L. var. Paluma) nectar volatile compounds concentration due to thermal processing and storage

Guava nectars were formulated for approximately 10, 12, or 14 ºBrix, with 40% guava pulp. Sodium benzoate, 500 mg.kg-1 was used as preservative. The Brix value was adjusted with saturated sucrose syrup. The guava nectar was pasteurized (85 ºC/42 seconds) in tubular heat exchanger and then hot filled in 500 mL white glass bottles. The products were stored either at room temperature (25 ± 5 ºC) or refrigerated (5 ± 2 ºC) under fluorescent light exposure and analyzed on the day after processing (time zero) and also 40, 80, and 120 days of storage. Eight compounds were identified and quantified by Gas Chromatography (GC) -Mass Spectrometry (MS): hexanal, (E)-hex-2-enal, 1-hexenol, (Z)-hex-3-enol, (Z)-hex-3-enyl acetate, phenyl-3-propyl acetate, cinnamyl acetate, and acetic acid. There was no significant effect of thermal treatment on the volatile compound concentrations, except for a significant decrease (p = 0.0001) in hexanal and (Z)-hex-3-enyl acetate (p = 0.0029). As for the storage time, there was a much greater decrease in the esters contents, such as (Z)-hex-3-enyl and phenyl-3-propyl acetates. Cinnamyl acetate had the greatest decrease over storage time. Refrigeration was better than room temperature for guava nectar volatile compounds stability over storage time, mainly for esters compounds, which are important for the product aroma and flavor

The influence of different combinations of probiotic bacteria and fermentation temperatures on the microbiological and physicochemical characteristics of fermented lactic beverages containing soybean hydrosoluble extract during refrigerated storage

Lactic beverages containing probiotics were prepared with whole UHT milk, whey of Mozzarella cheese, soybean hydrosoluble extract and sugar. Three formulations were studied, each one containing a different combination of probiotic/starter bacteria, fermented at two different temperatures (37 and 45 °C). The aim of this work was to verify the influence of these variables on the viability of probiotic microorganisms and on the physicochemical stability of lactic beverages during storage under refrigeration (21 days at 7 °C). The results indicated that the fermentation temperature had a significant effect on the viability of probiotic bacteria. Counts for Lactobacillus acidophilus were affected by storage time, resulting appropriate after 21 days only for the beverage fermented at 37 °C. Physicochemical parameters did not exhibit drastic variations - proving the stability of formulations during storage. Cells of Bifidobacterium spp. showed high survival ability, probably due to the presence of growth promoters from soybean and cheese whey. The fermentation temperature of 37 °C allowed counts above the minimum limit for all the studied microorganisms, being preferred to the temperature of 45 °C. The inclusion of soybean hydrosoluble extract, a prebiotics source, resulted in a symbiotic product with more benefits to the health of consumers.

Effect of storage and processing of Brazilian flaxseed on lipid and lignan contents

Flaxseed has been widely studied around the world; its incorporation into products habitually consumed by human populations has been stimulated due to its unique nutritional value. The objective of this study was to evaluate the chemical composition of Brazilian flaxseed, to analyze the stability of lipids present in whole flaxseed flour (WFF) or partially defatted flaxseed flour (DFF) stored under several temperatures, and to investigate the effect of bread making on a product containing flaxseed. Whole flaxseed flour presented (g.100 g-1) 25.7 of insoluble fiber, 10.7 of soluble fiber, 38.9 of lipids, and 2.65 of lignan. Defatted flaxseed flour presented 65% less lipids, 36% more fiber and 56% more lignan than whole flaxseed flour. The fatty acid profile was maintained in the defatted flaxseed flour, and it presented a stable composition during storage under ambient temperature, refrigeration, and freezing. The fatty acid profile was similar in the bread containing defatted flaxseed flour after dough development, baking, and storage at room temperature or refrigerated. After baking, 89% of the lignan content was kept in bread. Results show that Brazilian flaxseed has an interesting chemical composition, and that defatted flaxseed, by-product of lipid extraction, presents a good stability to grind and storage under several temperatures. Thus, defatted flaxseed flour can be incorporated in bread, increasing its nutritional and functional value.

Dynamics of gas levels inside packages containing minimally processed Pera orange

The purpose of this study was to evaluate the changes in concentrations of O2 and CO2 inside packages of minimally processed Pera orange. Previously selected oranges that were washed, sanitized, and chilled were peeled using hydrothermal treatment (immersion of fruits in water at 50 °C for 8 minutes). The peeled oranges were then packed in five different plastic packages under passive and active modified atmosphere (5% O2 + 10% CO2 + 85% N2). The fruits were stored at 6 °C and 12 °C. The package headspace gas composition was evaluated for twelve days at 6 °C and nine days at 12 °C. The polypropylene film (32 µm) promoted modified atmosphere similar to that initially injected (5% O2 + 10% CO2 + 85% N2) at 6 °C and 12 °C. With regard to the atmosphere modification system, the injection of a gas mixture anticipated achieving an equilibrium atmosphere inside the packages at 12 °C. At 6 °C, the gas composition inside the packages was kept close to that of the injection, but the equilibrium was not verified.

Physicochemical and microbiological characteristics of minimally processed 'Champagne' oranges (Citrus reticulata × Citrus sinensis) in different packgings

The objective of this study was to investigate the influence of the level of minimal processing and modified atmosphere on the quality of 'Champagne' orange stored under refrigeration. The fruits were subjected to the following processing: a) whole fruit without flavedo; b) whole fruit without flavedo and albedo; and c) segmented into wedges and packed as follows: uncoated packaging (control); polyethylene film; PVC film; gelatin-based edible films (3%); and polyesthyrene translucent plastic container with a lid. The minimally processed oranges were stored at 5 ± 1°C for 8 days and were subjected to physicochemical and microbiological analyses every two days. Greater weight loss occurred in fruits without flavedo and segmented, uncoated, and coated with the edible gelatin film During storage, there was a slight increase in Total Soluble Solids (TSS) for the treatments with greater weight loss and reduction in acidity and ascorbic acid, regardless of the packaging type. The microbial counts did not exceed the acceptable limits in the treatments; however, higher counts were observed at the end of storage. The minimally processed fruit packed in lidded polystyrene containers and polyethylene and PVC films kept their overall fresh visual appearance with a few physicochemical and microbiological changes up to the 8th day of storage.

Room temperature aging to guarantee microbiological safety of Brazilian artisan Canastra cheese

Canastra cheese is one of the oldest and most traditional cheeses made from raw milk in Brazil. However, this type of practice may have severe consequences for human health. According to the current legislation, any cheese made from raw milk must be aged for at least 60 days. Traditionally, Canastra cheese is consumed after different ripening periods, but consumers usually prefer those that are aged less than eight days. This study aimed to evaluate the effects of physicochemical and microbiological parameters, with emphasis on the pathogenic microbiota regulated by law, on cheese aged at room temperature and under refrigeration. Cheese samples were collected from eight different cheese producers located in the Serra da Canastra region twice a year (rainy and dry seasons) and analyzed with 8, 15, 22, 29, 36, and 64 days of ripening. Room temperature aging effectively reduced pathogens, reaching the total count established by law in 22 days, regardless of the season. However, ripening under refrigeration, it was ineffective in reducing the Staphylococcus aureus counts to the legislation limits, even after 64 days. Therefore, Canastra cheese should be ripened for at least 22 days at room temperature in order to fulfill the safety regulatory limits.

Phisicochemical, sensory, and microbiological evaluation and development of symbiotic fermented drink

The goal of this study was to develop a symbiotic lacteous drink, evaluate its physicochemical and sensory characteristics, and verify the viability of Lactobacillus acidophilus in the drink. The milk serum-based drink consisted of 50% milk serum containing 10% saccharose, 25% powdered milk, 15% yacon pulp, and cultures of Lactobacillus acidophilus-La 5E and Bifidobacterium bifidum BB12. It was stored for up to 21 days under refrigeration. The milk serum-based drink was analyzed for protein, ether extract, total dietary fiber, total frutans, carbohydrate content, color, pH, acidity, and contamination by coliforms, and Salmonella sp. Coliforms and Salmonella sp were not detected, and L. acidophilus and B. bifidum provided satisfactory probiotic counts up to 21 days of storage under refrigeration. Lactobacillus acidophilus resistance to gastric acids and bile salts was detected only up to seven days of storage when evaluated in vitro. Sensory analysis and purchase viability were evaluated by consumers at 0, 7, 14, and 21 days of storage. Based on the analytical results and consumer evaluation, the drink was acceptable up to seven days of storage.

Effect of an edible crosslinked coating and two types of packaging on antioxidant capacity of castilla blackberries

In order to increase the shelf life and maintain the quality and stability of the biological compounds with antioxidant activity present in Castilla blackberry fruits, a sodium alginate-based edible crosslinked coating was applied, and the fruits were packed in two different plastic containers and stored under refrigeration (3 ± 1 °C). Total antioxidant capacity and its relationship to physicochemical variables such as pH, Brix, and acidity were evaluated in six treatments: uncoated blackberry stored in a macroperforated container (T1) and thermosealed container (T2), without crosslinked coating in a macroperforated container (T3) and thermosealed container (T4), with crosslinked coating (calcium ions) packed in macroperforated container (T5) and thermosealed container (T6). The results indicated that factors such as gas permeability in the coatings, the packaging used, and physicochemical parameters significantly affected the fruit total antioxidant capacity, with the highest level in T1 (0.22 µgEAA/ml) at the end of the essay, which is related to the lowest levels of pH and direct exposure to air. On the other hand, the lowest value was obtained in T6 (0.16 µgEAA/ml) due to the crosslinked coating, packaging in the thermosealed container, and higher pH value. Variations in acidity, Brix, and pH indicate the presence of degenerative processes in the crosslinked coating treatments, which limited the physicochemical changes.

Energy evaluation of an evaporative cooling system using water driven ejector

The search for efficient and accessible cooling systems has increased worldwide. This study aims to build and evaluate an evaporative cooling system using a water driven ejector, allowing it to be installed in places with plenty of water. The system was investigated varying the flow rate and temperature of the circulating water, temperature of the replacement water, and coefficient of performance. The best vacuum obtained was 8.5 kPa at nominal operating conditions of 4.1 ± 0.1 m³/h and 5 ± 0.5 ºC for the circulating water reaching the temperature of 9.7 ± 0.5 ºC. The pulse-like disturbance generated by replacing the cooling water at different periods of times did not result in significant affect vacuum destabilization and the temperature rise in the cooling tank. The coefficient of performance of the system at the highest thermal power of 92.27 W was 0.077, which was underestimated due to possible problems related to pump efficiency. The system evaluated under the conditions proposed can be very efficient for cooling fluids at higher temperatures, and it can be complementary to main refrigeration systems.

Assessing environmental impacts using a comparative LCA of industrial and artisanal production processes: "Minas Cheese" case

This study uses the Life Cycle Assessment (LCA) methodology to evaluate and compare the environmental impacts caused by both the artisanal and the industrial manufacturing processes of "Minas cheese". This is a traditional cheese produced in the state of Minas Gerais (Brazil), and it is considered a "cultural patrimony" in the country. The high participation of artisanal producers in the market justifies this research, and this analysis can help the identification of opportunities to improve the environmental performance of several stages of the production system. The environmental impacts caused were also assessed and compared. The functional unit adopted was 1 kilogram (Kg) of cheese. The system boundaries considered were the production process, conservation of product (before sale), and transport to consumer market. The milk production process was considered similar in both cases, and therefore it was not included in the assessment. The data were collected through interviews with the producers, observation, and a literature review; they were ordered and processed using the SimaPro 7 LCA software. According to the impact categories analyzed, the artisanal production exerted lower environmental impacts. This can be justified mainly because the industrial process includes the pasteurization stage, which uses dry wood as an energy source and refrigeration.

Survival of Shiga toxin-producing Escherichia coli O157:H7 in Minas frescal cheese

Shiga toxin-producing Escherichia coli (STEC) O157:H7 strains (isolated by cattle’s faeces and a reference strain, EDL933), were inoculated into pasteurized milk (102 and 103 cells.mL–1) to prepare the Minas frescal cheese. As control was used uninfected milk. Physicochemical and microbiological analyses were performed to milk and elaborated cheese. The O157:H7 strains were quantified in the stages of cheese processing and during 0, 2, 4, 5, 7, 10 and 15 storage days at 8 °C onto Sorbitol MacConkey Agar supplemented with potassium tellurite and cefixime (CT-SMAC). O157:H7 was not present in the pasteurised milk prior to the artificial inoculation. At the end of the processing the cheese had 10 to 100 times more STEC O157:H7 than the initial inoculum. During the storage, the Minas frescal cheese exhibited the largest population increase on the 4th and 5th day when inoculated with 102 and 103 cells.mL–1, respectively. Additionally, viable cells were found up to the 10th and 15th day, according to the amount of initial inoculum. This number of cells is able to cause infection in humans, and therefore, Minas frescal cheese, even when stored under refrigeration, is a potential vehicle of disease caused by STEC O157:H7.