Mo掺杂对高纯Ce_(1-x)Nd_xO_(2-x/2)(x=0.10,0.15)体系烧结温度及晶界电性能的影响

用柠檬酸硝酸盐法制备高纯Ce1-xNdxO2-x/2(x=0.10,0.15)固溶体,加入摩尔分数为5%的Mo,研究了Mo掺杂对烧结温度、结构及电性能的影响.通过X射线衍射、电感偶合等离子体和场发射扫描电镜等手段对氧化物进行了结构表征,采用交流阻抗谱测试其电性能.柠檬酸硝酸盐法制备的前驱体经1450℃烧结24 h得到致密度大于96%的陶瓷材料;加入5%Mo,在1250℃下烧结8 h即可达到理想的致密度(>95%).加入Mo在烧结过程中可加快晶界迁移,促进晶粒生长,显著提高了晶界电导率.在600℃时Ce0.85Nd0.15O1.925的晶界电导率为2.56 S/m,加入Mo后材料的电导率增加到5.62 S/m.

(Ce_(0.9)Nd_(0.1))_(1-x)Mo_xO_(2-δ)(0.00≤x≤0.10)的合成、表征与电性能

采用溶胶-凝胶法合成(Ce0.9Nd0.1)1-xMoxO2-δ(x=0.00、0.02、0.05、0.10)氧化物,通过X射线衍射(XRD)、场发射扫描电镜(FESEM)等手段对氧化物进行结构表征,交流阻抗谱测试电性能.结果表明:所有样品均为单一萤石立方结构;少量MoO3的加入提高了材料的致密性,降低了材料的总电阻、晶界电阻和晶界电阻在总电阻中所占比例,提高了材料的电导率.1200℃烧结样品24h,测试温度700℃时,(Ce0.9Nd0.1)1-xMoxO2-δ(x=0.00)总电导率和晶界电导率分别为0.05和0.19S·m-1,掺Mo材料(Ce0.9Nd0.1)1-xMoxO2-δ(x=0.02)的总电导率和晶界电导率分别为2.42和3.96S·m-1.

Sol-ogel deposition and luminescence properties of lanthanide ion-doped Y2(1-x)Gd2xSiWO8 (0 <= x <= 1) phosphor films

Y2(1-x) Gd2xSiWO8 : A ( 0 <= x <= 1; A= Eu3+, Dy3+, Sm3+, Er3+) phosphor films have been prepared on silica glass substrates through the sol - gel dip-coating process. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric and differential thermal analysis (TG-DTA), atomic force microscope (AFM), scanning electron microscopy (SEM) and photoluminescence spectra as well as lifetimes were used to characterize the resulting films. The results of the XRD indicated that the films began to crystallize at 800 degrees C and crystallized completely at 1000 degrees C. The AFM and SEM study revealed that the phosphor films, which mainly consisted of closely packed grains with an average size of 90 - 120 nm with a thickness of 660 nm, were uniform and crack free. Owing to an efficient energy transfer from the WO42- groups to the activators, the doped lanthanide ion ( A) showed its characteristic f - f transition emissions in crystalline Y2(1-x) Gd2xSiWO8 (0 <= x <= 1) films. The optimum concentrations for Eu3+, Dy3+, Sm3+, Er3+ were determined to be 21, 5, 3 and 7 mol% of Y3+ in Y2SiWO8 films, respectively.

The structure and electrochemical characteristics of La0.67Mg0.33 (Ni0.8Co0.1Mn0.1)(x) (x=2.5-5.0) multiphase alloys for nickel-metal hydride batteries

This paper presents results concerning structure and electrochemical characteristics of the La0.67Mg0.33 (Ni0.8Co0.1Mn0.1) (x) (x=2.5-5.0) alloy. It can be found from the result of the Rietveld analyses that the structures of the alloys change obviously with increasing x from 2.5 to 5.0. The main phase of the alloys with x=2.5-3.5 is LaMg2Ni9 phase with a PuNi3-type rhombohedral structure, but the main phase of the alloys with x=4.0-5.0 is LaNi(5)phase with a CaCu5-type hexagonal structure. Furthermore, the phase ratio, lattice parameter and cell volume of the LaMg2Ni9 phase and the LaNi5 phase change with increasing x. The electrochemical studies show that the maximum discharge capacity increases from 214.7 mAh/g (x=2.5) to 391.1 mAh/g (x=3.5) and then decreases to 238.5 mAh/g (x=5.0). As the discharge current density is 1,200 mA/g, the high rate dischargeability (HRD) increases from 51.1% (x=2.5) to 83.7% (x=3.5) and then decreases to 71.6% (x=5.0). Moreover, the exchange current density (I-0) of the alloy electrodes first increases and then decrease with increasing x from 2.5 to 5.0, which is consistent with the variation of the HRD. The cell volume reduces with increasing x in the alloys, which is detrimental to hydrogen diffusion and accordingly decreases the low-temperature dischargeability of the alloy electrodes.

高功率镍氢电池La_(1-x)Mg_x(NiCoAl)_(3.6)金属氢化物电极的电化学性能研究

MH-Ni电池具有电化学比能量高、耐过充/放电性能好、无记忆效应和环境友好等优点而得到广泛应用.金属氢化物电极是MH-Ni电池的核心材料,其研究工作主要集中在稀土AB_5系、钛系、锆系和镁基等合金作为MH-Ni电池金属氢化物电极方面.但这些体系合金的电化学容量低,活化

镧六方铁氧体Ba_(1-x)La_xFe_(12)O_(19)的电磁性能与吸波特性

研究了掺稀土六方铁氧体Ba1-xLaxFe12O19的合成条件,测试了其结构、形貌、电磁性能与吸波特性.结果表明,稀土离子La3+的加入,降低了钡铁氧体的磁化强度、矫顽力和顽磁性,其磁特性接近软磁铁氧体材料;在1.65～2.95GHz的频率范围内,具有良好的吸波性能.

Novel hydrogen-bonded three-dimensional networks encapsulating one-dimensional covalent chains: [M(4,4 '-bipy)(H2O)4](4-abs)2 center dot nH(2)O (4,4 '-bipy=4,4 '-Bipyridine; 4-abs=4-aminobenzenesulfonate) (M=Co, n=1; M=Mn, n=2)

Two novel compounds, [Co(4,4'-bipy)(H2O)(4)](4-abS)(2).H2O (1) and [Mn(4,4'-bipy)(H2O)(4)](4-abs)(2).2H(2)O (2) (4,4'-bipy = 4,4'-bipyridine; 4-abs = 4-aminobenzenesulfonate), have been synthesized in aqueous solution and characterized by single-crystal X-ray diffraction, elemental analyses, UV-vis and IR spectra, and TG analysis. X-ray structural analysis revealed that 1 and 2 both possess unusual hydrogen-bonded three-dimensional (3-D) networks encapsulating one-dimensional (1-D) covalently bonded infinite [M(4,4'-bipy)(H2O)(4)](2+) (M = Co, Mn) chains. The 4-abs anions in 1 form 1-D zigzag chains through hydrogen bonds. These chains are further extended through crystallization water molecules into 3-D hydrogen-bonded networks with 1-D channels, in which the [Co(4,4'-bipy)(H2O)(4)](2+) linear covalently bonded chains are located. Crystal data for 1: C22H30CoN4O11S2, monoclinic P2(1), a = 11.380(2) Angstrom, b = 8.0274(16) Angstrom, c = 15.670(3) Angstrom, alpha = gamma = 90degrees, beta = 92.82(3)degrees, Z = 2. Compound 2 contains interesting two-dimensional (2-D) honeycomb-like networks formed by 4-abs anions and lattice water molecules via hydrogen bonding, which are extended through other crystallization water molecules into three dimensions with 1-D hexagonal channels. The [Mn(4,4'-bipy)(H2O)(4)](2+) linear covalent chains exist in these channels. Crystal data for 2: C22H32WN4O12S2, monoclinic P2(1)/c, a = 15.0833(14) Angstrom, b = 8.2887(4) Angstrom, c = 23.2228(15) Angstrom, alpha = gamma = 90degrees, beta = 95.186(3)degrees, Z = 4.

La_(1-x)Pr_xP_5O_(14) 晶体的光谱性质

分析了室温下晶体在紫外、可见区的吸收、荧光和红外光谱,利用Judd Ofeld理论计算了PrPP和La0.2Pr0.8PP晶体中Pr3+的实验振子强度,PrPP和La0.2Pr0.8PP晶体中Pr3+离子振子强度变化不大,说明在该晶体中Pr3+的浓度猝灭效应较小。红外光谱和结构分析确定了晶体的结构为单斜晶系,并观察到Pr3+的3P0 3H6跃迁的红色发射很强。

La(1-x)Pr_xP_5O_(14)晶体的研究

用水热法研究了La12xPr xP5O14(LaPrPP)(0 < x < 1,原子百分含量)晶体的生长,测定了La0.2Pr0.8PP晶体结构为 单斜晶系,空间群为P21/c。晶体的密度为3.27g/cm3,分解温度为915℃。分析了室温下晶体在紫外、可见区的吸 收、荧光和红外光谱,利用Judd2Ofeld 理论计算了PrPP 和La0. 2Pr0. 8PP 晶体中Pr3 + 的实验振子强度,得到一些规律性结果,观察到Pr3 + 的3 P0 —3 H6 跃迁的红色发射很强。

Ce_(1-x)Sm_xO_(2-x/2)的溶胶-凝胶法的合成及氧空位的研究

本文利用溶胶-凝胶法合成了Ce_(1-x)Sm_xO_(2-x/2)(x=0-0.4)系列固体电解质,并且系统地研究了其晶体结构随Sm含量的变化关系。XRD表明:该体系从160℃开始即形成了立方萤石结构,且在所研究的组成范围内全部形成了单相固溶体。此温度远低于传统的高温固相合成法所需的温度,同时也较水热合成法的温度低。高温X-ray衍射研究表明直到800℃Ce_(1-x)Sm_xO_(2-x/2)未出现结构相转变,其晶格常数和晶胞体积随温度升高而增大。EPR测试证实了由于Sm~(3+)部分置换Ce~(4+)固溶体中所存在的单电荷缺陷(Sm_(Ce’),V_o~(oo))结构。在固溶体的Raman谱中观察到:纯CeO_2在465cm~(-1)仅有一个Raman振动模式,随着掺杂量的增大,此振动模式向低频方向移动,而且Raman线变宽且在570cm~(-1)附近出现一新的峰,这些变化都是由Sm~(3+)取代Ce~(4+)所产生的氧空位引起的。

YP_(1-x)V_xO_4∶Eu~(3+)在真空紫外区发光的优化

系统地考查了Eu3 + 在YPO4 YVO4 固溶体中的发光。当V5+ 的浓度低于 0 3 ,出现VO4 3 -离子团的蓝色发射 ;直到V5+ 的浓度等于或大于 0 3时 ,VO4 3 -离子团的蓝色发射才被Eu3 + 离子的红色发射所猝灭 ,发射主波长在 61 9nm。在真空紫外线的激发下 ,Eu3 + 在YPO4 YVO4 固溶体有较强发光 ,并随着P5+ 浓度的增加 ,Eu3 + 离子的发光增强。经过优化的组成为YP0 7V0 3 O4 ∶Eu3 + 的荧光粉在真空紫外激发下既具有较强的发光 ,又具有优良的色纯度 ,将是一种新型的良好的等离子体平板显示用荧光粉。

Ce_(1-x)Ca_xO_(2-x)的溶胶-凝胶法的合成及其性质

用溶胶 -凝胶法合成了 Ce1-x Cax O2 -x(x=0～ 0 .3 5 )系列固体电解质 ,系统地研究了其晶体结构随Ca O含量的变化关系 .XRD测试表明 ,该体系于 1 60℃即形成萤石结构纯相 .高温 XRD表明 ,从室温至80 0℃ ,Ce1-x Cax O2 -x(x=0～ 0 .3 5 )未出现结构相变 .此法合成温度远低于传统的高温固相合成法和水热合成法的温度 .合成物的颗粒小 ,粒度均匀 .在 1 3 0 0℃即可烧结成高致密度样品 .XPS测试表明 ,掺杂 Ca O后吸附氧浓度明显增大 ,氧空位增多 ,电导率和氧离子迁移数增大 ,改善了 Ce O2 基固体电解质的性能 .

La_(1-x)Nd_xCrO_3(0.0≤x≤1.0)的化学键参数计算

使用复杂晶体化学键理论计算了La1-xNdxCrO3 (x =0 .0 ,0 .2 ,0 .4,0 .6 ,0 .8,1.0 )的化学键参数 ,如键性、键极化率等。结果表明 ,La-O ,Nd -O和Cr-O键的共价性基本上不随Nd掺杂的变化而变化 ,这个结论与实验结果一致。键极化率和磁距则随着掺杂量的增加而增加。共价性的大小次序为La -O