Full interference cancellation for two-path relay cooperative networks

This paper proposes the full interference cancellation (FIC) algorithm to cancel the inter-relay interference (IRI) in the two-path cooperative system. Arising from simultaneous data transmission from the source and relay nodes, IRI may significantly decrease the performance if it is not carefully handled. Compared to the existing partial interference cancellation (PIC) scheme, the FIC approach is more robust yet with less complexity. Numerical results are also given to verify the proposed scheme.

Interference cancellation in two-path successive relay system with network coding

This paper proposes a novel interference cancellation algorithm for the two-path successive relay system using network coding. The two-path successive relay scheme was proposed recently to achieve full date rate transmission with half-duplex relays. Due to the simultaneous data transmission at the relay and source nodes, the two-path relay suffers from the so-called inter-relay interference (IRI) which may significantly degrade the system performance. In this paper, we propose to use the network coding to remove the IRI such that the interference is first encoded with the network coding at the relay nodes and later removed at the destination. The network coding has low complexity and can well suppress the IRI. Numerical simulations show that the proposed algorithm has better performance than existing approaches.

The Impact of office productivity cloud computing on energy consumption and greenhouse gas emissions

Cloud computing is usually regarded as being energy efficient and thus emitting less greenhouse gases (GHG) than traditional forms of computing. When the energy consumption of Microsoft’s cloud computing Office 365 (O365) and traditional Office 2010 (O2010) software suites were tested and modeled, some cloud services were found to consume more energy than the traditional form. The developed model in this research took into consideration the energy consumption at the three main stages of data transmission; data center, network, and end user device. Comparable products from each suite were selected and activities were defined for each product to represent a different computing type. Microsoft provided highly confidential data for the data center stage, while the networking and user device stages were measured directly. A new measurement and software apportionment approach was defined and utilized allowing the power consumption of cloud services to be directly measured for the user device stage. Results indicated that cloud computing is more energy efficient for Excel and Outlook which consumed less energy and emitted less GHG than the standalone counterpart. The power consumption of the cloud based Outlook (8%) and Excel (17%) was lower than their traditional counterparts. However, the power consumption of the cloud version of Word was 17% higher than its traditional equivalent. A third mixed access method was also measured for Word which emitted 5% more GHG than the traditional version. It is evident that cloud computing may not provide a unified way forward to reduce energy consumption and GHG. Direct conversion from the standalone package into the cloud provision platform can now consider energy and GHG emissions at the software development and cloud service design stage using the methods described in this research.

Obstacle avoidance routing scheme through optimal sink movement for home monitoring and mobile robotic consumer devices

In recent years, ZigBee has been proven to be an excellent solution to create scalable and flexible home automation networks. In a home automation network, consumer devices typically collect data from a home monitoring environment and then transmit the data to an end user through multi-hop communication without the need for any human intervention. However, due to the presence of typical obstacles in a home environment, error-free reception may not be possible, particularly for power constrained devices. A mobile sink based data transmission scheme can be one solution but obstacles create significant complexities for the sink movement path determination process. Therefore, an obstacle avoidance data routing scheme is of vital importance to the design of an efficient home automation system. This paper presents a mobile sink based obstacle avoidance routing scheme for a home monitoring system. The mobile sink collects data by traversing through the obstacle avoidance path. Through ZigBee based hardware implementation and verification, the proposed scheme successfully transmits data through the obstacle avoidance path to improve network performance in terms of life span, energy consumption and reliability. The application of this work can be applied to a wide range of intelligent pervasive consumer products and services including robotic vacuum cleaners and personal security robots1.

Comparison of low-power wireless communication technologies for wearable health-monitoring applications

Health monitoring technologies such as Body Area Network (BAN) systems has gathered a lot of attention during the past few years. Largely encouraged by the rapid increase in the cost of healthcare services and driven by the latest technological advances in Micro-Electro-Mechanical Systems (MEMS) and wireless communications. BAN technology comprises of a network of body worn or implanted sensors that continuously capture and measure the vital parameters such as heart rate, blood pressure, glucose levels and movement. The collected data must be transferred to a local base station in order to be further processed. Thus, wireless connectivity plays a vital role in such systems. However, wireless connectivity comes at a cost of increased power usage, mainly due to the high energy consumption during data transmission. Unfortunately, battery-operated devices are unable to operate for ultra-long duration of time and are expected to be recharged or replaced once they run out of energy. This is not a simple task especially in the case of implanted devices such as pacemakers. Therefore, prolonging the network lifetime in BAN systems is one of the greatest challenges. In order to achieve this goal, BAN systems take advantage of low-power in-body and on-body/off-body wireless communication technologies. This paper compares some of the existing and emerging low-power communication protocols that can potentially be employed to support the rapid development and deployment of BAN systems.

A resource-search and routing algorithm within PCDN autonomy area

This paper studied a new type of network model; it is formed by the dynamic autonomy area, the structured source servers and the proxy servers. The new network model satisfies the dynamics within the autonomy area, where each node undertakes different tasks according to their different abilities, to ensure that each node has the load ability fit its own; it does not need to exchange information via the central servers, so it can carry out the efficient data transmission and routing search. According to the highly dynamics of the autonomy area, we established dynamic tree structure-proliferation system routing and resource-search algorithms and simulated these algorithms. Test results show the performance of the proposed network model and the algorithms are very stable.

A profiling based task scheduling approach for multicore network processors

 Multicore network processors have been playing an increasingly important role in computational processes, which emphasize on scalability and parallelism of the systems, in distributed environments especially in Internet-based delay-sensitive applications. It is an important but unsolved issue, however, to efficiently schedule tasks in network processors with multicore and multithread for improving the system throughput as much as possible. Profiling can gather runtime environment information and guide the compiler to optimize programs through scheduling tasks based on the runtime context. This paper proposes a profiling-based task scheduling approach, targeting on improving the throughput of multicore network processor (Intel IXP) systems in the balanced pipeline way. In this work, we investigate a profiling-based task scheduling framework, a task scheduling algorithm, and a set of performance models. Our task allocation scheme maps tasks onto the pipeline architecture and multiple threads of network processors in parallel, which incorporates the profiling context and global thread refinement. We evaluate our task scheduling algorithm by implementing representative network applications on the Intel IXP network processor. Experimental results demonstrate that our algorithm is able to schedule tasks in a balanced pipeline fashion and achieve the high throughput and data transmission rate. Copyright © 2012 John Wiley & Sons, Ltd.

In support of hydrocarbon exploration and discovery using clouds

Seismic data gathered from the Hydrocarbon Exploration and Discovery Operation is essential to identify possible hydrocarbon existence in a geologically surveyed area. However, the discovery operation takes a long time to be completed and computational processing of the acquired data is often delayed. Hydrocarbon exploration may end up needlessly covering an area without any hydrocarbon traces due to lack of immediate feedback from geophysical experts. This feedback can only be given when the acquired seismic data is computationally processed, analysed and interpreted. In response, we propose a comprehensive model to facilitate Hydrocarbon Exploration and Discovery Operation using encryption, decryption, satellite transmission and clouds. The model details the logical design of Seismic Data Processing (SDP) that exploits clouds and the ability for geophysical experts to provide on-line decisions on how to progress the hydrocarbon exploration operation at a remote location. Initial feasibility assessment was carried out to support our model. The SDP, data encryption and encryption for the assessment were carried out on a private cloud. The assessment shows that the overall process of hydrocarbon exploration from data acquisition, satellite data transmission through to SDP could be executed in a short time and at low costs.

Novel Z-Domain precoding method for blind separation of spatially correlated signals

In this paper, we address the problem of blind separation of spatially correlated signals, which is encountered in some emerging applications, e.g., distributed wireless sensor networks and wireless surveillance systems. We preprocess the source signals in transmitters prior to transmission. Specifically, the source signals are first filtered by a set of properly designed precoders and then the coded signals are transmitted. On the receiving side, the Z-domain features of the precoders are exploited to separate the coded signals, from which the source signals are recovered. Based on the proposed precoders, a closed-form algorithm is derived to estimate the coded signals and the source signals. Unlike traditional blind source separation approaches, the proposed method does not require the source signals to be uncorrelated, sparse, or nonnegative. Compared with the existing precoder-based approach, the new method uses precoders with much lower order, which reduces the delay in data transmission and is easier to implement in practice.

Bloom filter based secure and anonymous DSR protocol in wireless ad hoc networks

Wireless ad hoc networks, especially in the hostile environment, are vulnerable to traffic analysis which allows the adversary to trace the routing messages and the sensitive data packets. Anonymity mechanism in ad hoc networks is a critical securing measure method employed to mitigate these problems. In this paper, we propose a novel secure and anonymous source routing protocol, called SADSR, based on Dynamic Source Routing (DSR) for wireless ad hoc networks. In the proposed scheme, we use the pseudonym, pseudonym based cryptography and the bloom filter to establish secure and anonymous routing in wireless ad hoc networks. Compared to other anonymous routing protocol, SADSR is not only anonymous but also the secure in the routing discover process and data transmission process.

Separating spatially correlated signals using first-order precoders

This paper deals with blind separation of spatially correlated signals mixed by an instantaneous system. Taking advantage of the fact that the source signals are accessible in some man-made systems such as wireless communication systems, we preprocess the source signals in transmitters by a set of properly designed first-order precoders and then the coded signals are transmitted. At the receiving side, information about the precoders are utilized to perform signal separation. Compared with the existing precoder-based methods, the new method only employs the simplest first-order precoders, which reduces the delay in data transmission and is easier to implement in practical applications.

An analytical model for optimal spectrum leasing under constraints of quality of service in CRNs

Cognitive radio improves spectrum efficiency and mitigates spectrum scarcity by allowing cognitive users to opportunistically access idle chunks of the spectrum owned by licensed users. In long-term spectrum leasing markets, secondary network operators make a decision about how much spectrum is optimal to fulfill their users' data transmission requirements. We study this optimization problem in multiple channel scenarios. Under the constrains of expected user admission rate and quality of service, we model the secondary network into a dynamic data transportation system. In this system, the spectrum accesses of both primary users and secondary users are in accordance with stochastic processes, respectively. The main metrics of quality of service we are concerned with include user admission rate, average transmission delay and stability of the delay. To quantify the relationship between spectrum provisioning and quality of service, we propose an approximate analytical model. We use the model to estimate the lower and upper bounds of the optimal amount of the spectrum. The distance between the bounds is relatively narrow. In addition, we design a simple algorithm to compute the optimum by using the bounds. We conduct numerical simulations on a slotted multiple channel dynamic spectrum access network model. Simulation results demonstrate the preciseness of the proposed model. Our work sheds light on the design of game and auction based dynamic spectrum sharing mechanisms in cognitive radio networks.

On the security of compressed sensing-based signal cryptosystem

With the development of the cyber-physical systems (CPS), the security analysis of the data therein becomes more and more important. Recently, due to the advantage of joint encryption and compression for data transmission in CPS, the emerging compressed sensing (CS)-based cryptosystem has attracted much attention, where security is of extreme importance. The existing methods only analyze the security of the plaintext under the assumption that the key is absolutely safe. However, for sparse plaintext, the prior sparsity knowledge of the plaintext could be exploited to partly retrieve the key, and then the plaintext, from the ciphertext. So, the existing methods do not provide a satisfactory security analysis. In this paper, it is conducted in the information theory frame, where the plaintext sparsity feature and the mutual information of the ciphertext, key, and plaintext are involved. In addition, the perfect secrecy criteria (Shannon-sense and Wyner-sense) are extended to measure the security. While the security level is given, the illegal access risk is also discussed. It is shown that the CS-based cryptosystem achieves the extended Wyner-sense perfect secrecy, but when the key is used repeatedly, both the plaintext and the key could be conditionally accessed.

Adoção de tecnologias móveis em empresas do Rio Grande do Norte, Pernambuco e Ceará

One of the best examples of the Information and Communication Technology (ICT) evolutions is on the high capability of storing and processing data into smaller devices, creating a new business condition, the mobility . This mobility in a deeper analysis proposes a business remodeling in many different areas (business segmentations), through the Internet anywhere at any time, allowing managers and researchers to think again their actual models that work nowadays in companies and public institutions, modifying the way internal and external clients can be attended. This thesis analyzes issues on mobile business adoption, technological evolutions and the impacts caused by this new reality the access to information anywhere at any time . This research is exploratory and shows a compilation of similar papers and thesis describing how was conducted the survey within 50 companies in the states of Rio Grande do Norte, Pernambuco and Ceará. The statistics analysis showed the different level of mobile technology usage from simple voice communications to wide band data transmission. The analysis pointed that canonic correlation was the most effective type of analysis to describe the relations among all groups of variables showing which of them are relevant, or not, for mobile technology adoption

Desenvolvimento de um software de comunicação sem fio aplicado à instrumentação de unidade de elevação de petróleo tipo Plunger Lift

This dissertation aims to develop a software applied to a communication system for a wireless sensor network (WSN) for tracking analog and digital variables and control valve of the gas flow in artificial oil s elevation units, Plunger Lift type. The reason for this implementation is due to the fact that, in the studied plant configuration, the sensors communicate with the PLC (Programmable and Logic Controller) by the cables and pipelines, making any changes in that system, such as changing the layout of it, as well as inconveniences that arise from the nature of the site, such as the vicinity s animals presence that tend to destroy the cables for interconnection of sensors to the PLC. For software development, was used communication polling method via SMAC protocol (Simple Medium Access ControlIEEE 802.15.4 standard) in the CodeWarrior environment to which generated a firmware, loaded into the WSN s transceivers, present in the kit MC13193-EVK, (all items described above are owners of Freescale Semiconductors Inc.). The network monitoring and parameterization used in its application, was developed in LabVIEW software from National Instruments. The results were obtained through the observation of the network s behavior of sensors proposal, focusing on aspects such as: indoor and outdoor quantity of packages received and lost, general aspects of reliability in data transmission, coexistence with other types of wireless networks and power consumption under different operating conditions. The results were considered satisfactory, which showed the software efficiency in this communication system