Design concepts for the Cherenkov Telescope Array CTA: an advanced facility for ground-based high-energy gamma-ray astronomy

Ground-based gamma-ray astronomy has had a major breakthrough with the impressive results obtained using systems of imaging atmospheric Cherenkov telescopes. Ground-based gamma-ray astronomy has a huge potential in astrophysics, particle physics and cosmology. CTA is an international initiative to build the next generation instrument, with a factor of 5-10 improvement in sensitivity in the 100 GeV-10 TeV range and the extension to energies well below 100 GeV and above 100 TeV. CTA will consist of two arrays (one in the north, one in the south) for full sky coverage and will be operated as open observatory. The design of CTA is based on currently available technology. This document reports on the status and presents the major design concepts of CTA.

Improving the efficiency of PV low-power processing circuits by selecting an optimal inductor current of the DC/DC converter

In the context of autonomous sensors powered by small-size photovoltaic (PV) panels, this work analyses how the efficiency of DC/DC-converter-based power processing circuits can be improved by an appropriate selection of the inductor current that transfers the energy from the PV panel to a storage unit. Each component of power losses (fixed, conduction and switching losses) involved in the DC/DC converter specifically depends on the average inductor current so that there is an optimal value of this current that causes minimal losses and, hence, maximum efficiency. Such an idea has been tested experimentally using two commercial DC/DC converters whose average inductor current is adjustable. Experimental results show that the efficiency can be improved up to 12% by selecting an optimal value of that current, which is around 300-350 mA for such DC/DC converters.

Solid phase extraction of iron and lead in environmental matrices on amberlite xad-1180/pv

A solid phase extraction procedure using Amberlite XAD-1180/Pyrocatechol violet (PV) chelating resin for the determination of iron and lead ions in various environmental samples was established. The procedure is based on the sorption of lead(II) and iron(III) ions onto the resin at pH 9, followed by elution with 1 mol/L HNO3 and determination by flame atomic absorption spectrometry. The influence of alkaline, earth alkaline and some transition metals, as interferents, are discussed. The recoveries for the spiked analytes were greater than 95%. The detection limits for lead and iron by FAAS were 0.37 µg/L and 0.20 µg/L, respectively. Validation of the method described here was performed by using three certified reference materials (SRM 1515 Apple Leaves, SRM 2711 Montana Soil and NRCC-SLRS-4 Riverine Water). The procedure was successfully applied to natural waters and human hair.

The use of Rich and Suter diagrams to explain the electron configurations of transition elements

Rich and Suter diagrams are a very useful tool to explain the electron configurations of all transition elements, and in particular, the s¹ and s0 configurations of the elements Cr, Cu, Nb, Mo, Ru, Rh, Pd, Ag, and Pt. The application of these diagrams to the inner transition elements also explains the electron configurations of lanthanoids and actinoids, except for Ce, Pa, U, Np, and Cm, whose electron configurations are indeed very special because they are a mixture of several configurations.

Identificação de xanthomonas axonopodis pv. phaseoli e x. axonopodis pv. phaseoli var. fuscans através da técnica de pcr

Este trabalho teve por objetivo verificar a viabilidade de utilização da técnica de PCR, usando primers considerados específicos, para identificação de Xanthomonas axonopodis pv. phaseoli (Xap) e x. axonopodis pv. phaseoli var. fuscans (Xapf), visando criar bases para sua utilização em diagnose rotineira e em programas de certificação de sementes. Foram incluídos no estudo 42 isolados da bactéria provenientes de locais distintos, além de outros gêneros, espécies e patovares, para ser verificada a especificidade dos primers. Os resultados obtidos permitem concluir que os primers utilizados são adequados para identificação de Xap e Xapf, embora dois isolados patogênicos não tenham sido amplificados. Foi observada também a amplificação de uma banda fraca para X. axonopodis pv. vitians, com o mesmo número de pares de bases, o que sugere existir homologia entre estes patovares, na região amplificada.

Termoterapia via calor seco no tratamento de sementes de tomate: eficiência na erradicação de Xanthomonas campestris pv. vesicatoria e efeitos sobre a semente

Sementes infetadas constituem fonte primária de inóculo para epidemias da mancha bacteriana do tomate (Lycopersicon esculentum)que sob condições favoráveis podem resultar em rápido desenvolvimento da doença e severas perdas. O presente trabalho objetivou avaliar a eficiência do tratamento térmico a 70 ºC por 96 h na erradicação de Xanthomonas campestris pv. vesicatoria de sementes de tomate e seu efeito sobre a qualidade fisiológica e estrutura das sementes, por meio de microscopia eletrônica de varredura (MEV). Realizaram-se dois ensaios, e utilizando-se sementes inoculadas pelo método a vácuo com o isolado ENA 4463 a 10(7) ufc/ml em NaCl (0,85%). No primeiro ensaio compararam-se quatro tratamentos: sementes inoculadas (1), sementes inoculadas e tratadas a 70 ºC/96 h em estufa com circulação forçada de ar (2), sementes não inoculadas e não tratadas (3) e sementes não inoculadas e tratadas (70 ºC/96 h) (4). No segundo ensaio, apenas os tratamentos (1), (2) e (3) foram comparados. As amostras foram avaliadas quanto à qualidade fisiológica e recuperação da fitobactéria por meio de extração a vácuo seguido de riscagem em meios semi-seletivos, além de observações em MEV. Constatou-se eficiência de 100% e 99,96% na erradicação da bactéria no primeiro e segundo ensaio, respectivamente. Não houve nenhum efeito do tratamento térmico sobre a germinação. Observações ao MEV, revelaram alterações na estrutura superficial das sementes, com remoção, quebra e fusão de tricomas, além de danos à integridade das células bacterianas associadas à superfície do tegumento.

Genetic linkage map of Phaseolus vulgaris and identification of QTLs responsible for resistance to Xanthomonas axonopodis pv. phaseoli

Common bean (Phaseolus vulgaris) cultivars with a high degree of resistance to Xanthomonas axonopodis pv. phaseoli (Xap) are not available in Brazil. Despite many studies, a low degree of resistance to Xap continues to exist due to its complex genetic inheritance, which is not well known. The objectives of this research were to complement a common bean genetic map based on the cross between a susceptible genotype 'HAB-52' and a resistant genotype 'BAC-6', and to map and analyze genomic regions (quantitative trait loci – QTLs) related to Xap resistance. Eleven linkage groups were determined using 143 RAPD markers, covering 1,234.5 cM of the genome. This map was used to detect QTLs associated with Xap resistance on leaves and pods. The averages of disease severity on leaves (represented by the transformed disease index – TDI) and pods (represented by the diameter of lesion on pods – DLP) were added to the data of the linkage map. Five TDI QTLs and only one LDP QTL were detected. The TDI QTLs were placed in the A, B, G and J linkage groups, with phenotypic variations ranging from 12.7 to 71.6%. The DLP QTL explained 12.9% of the phenotypic variation and was mapped in a distinct linkage group. These results indicate that there are different genes involved in the control of resistance on leaves and pods.

Componentes da resistência à mancha-bacteriana e crescimento de Xanthomonas campestris pv. vesicatoria, raça T2, em genótipos de tomateiro

Componentes da resistência e crescimento da população bacteriana de Xanthomonas campestris pv. vesicatoria (Xcv), raça T2, foram quantificados em genótipos de tomateiro (Lycopersicon esculentum) resistentes ('Ohio 8245', 'Agrocica 30' e 'Hawaii 7998') e suscetíveis ('CNPH 401-08'e 'CNPH 416.81.01.02'). A população bacteriana de Xcv evoluiu diferentemente em genótipos resistentes e suscetíveis, atingindo valor até 100 vezes maior no genótipo suscetível 'CNPH 401-08', sete dias após a inoculação. Os componentes de resistência avaliados foram tamanho de lesão, número de lesões, área lesionada e período latente. Os genótipos resistentes e suscetíveis diferiram estatisticamente entre si para todos os componentes avaliados, exceto para o diâmetro da lesão, onde somente o genótipo 'CNPH 416.81.01.02' diferiu dos genótipos resistentes. O período latente foi significativamente diferente em genótipos resistentes e suscetíveis no campo, casa de vegetação e câmara de crescimento, e variou entre seis e 11 dias. Tamanho de lesão não foi um bom indicador para separar genótipos quanto à resistência, por ser um caráter bastante influenciado pelo ambiente. O número de lesões e o período latente apresentaram-se como caracteres fáceis e rápidos de serem avaliados; estes componentes explicam, em grande parte, a resistência observada nos genótipos avaliados pelo sistema de notas.

Molecular characterization of Brazilian strains of Xanthomonas campestris pv. viticola by rep-PCR fingerprinting

Bacterial canker of grapevine (Vitis vinifera), caused by Xanthomonas campestris pv. viticola was first detected in Brazil in 1998, affecting grapevines in the São Francisco river basin, state of Pernambuco. The disease was also reported in Juazeiro, Bahia and later in Piauí and Ceará. Due to its limited geographical distribution and relatively recent detection in Brazil, very little is known about the pathogen's biology and diversity. Repetitive DNA based-PCR (rep-PCR) profiles were generated from purified bacterial DNA of 40 field strains of X. campestris pv. viticola, collected between 1998 and 2001 in the states of Pernambuco, Bahia and Piauí. Combined analysis of the PCR patterns obtained with primers REP, ERIC and BOX, showed a high degree of similarity among Brazilian strains and the Indian type strain NCPPB 2475. Similar genomic patterns with several diagnostic bands, present in all strains, could be detected. Fingerprints were distinct from those of strains representing other pathovars and from a yellow non-pathogenic isolate from grape leaves. The polymorphism observed among the Brazilian strains allowed their separation into five subgroups, although with no correlation with cultivar of origin, geographic location or year collected.

Transformation of Xanthomonas axonopodis pv. citri by electroporation

This study describes the use of electroporation for transforming Xanthomonas axonopodis pv. citri (Xac), the causal agent of citrus (Citrus spp.) canker. It also evaluates the methodology used for this species under different electrical parameters. The bacterium used in the study (Xac 306) was the same strain used for recent complete sequencing of the organism. The use of a plasmid (pUFR047, gentamycin r) is reported here to be able to replicate in cells of Xac. Following the preparation and resuspension of competent cells of Xac at a density of ~4 x 10(10) cfu/ml, in 10% glycerol, and the addition of the replicative plasmid, an electrical pulse was applied to each treatment. Selection of transformants showed a high efficiency of transformation (1.1 x 10(6) transformants/mug DNA), which indicates an effective, and inverse, combination between electrical resistance (50 W) and capacitance (50 µF) for this species, with an electrical field strength of 12.5 kV.cm-1 and 2.7-ms pulse duration. Besides the description of a method for electroporation of Xac 306, this study provides additional information for the use of the technique on studies for production of mutants of this species.

A Semi-Selective agar medium to detect the presence of Xanthomonas axonopodis pv. malvacearum in naturally infected cotton seed

A semi-selective agar medium was developed for detection of Xanthomonas axonopodis pv. malvacearum (Xam) in cotton (Gossypium hirsutum) seed. The basic medium was peptone-sucrose-agar (PSA). Criteria for the semi-selective medium were the typical colony characters of Xam and its pathogenicity on cotton. Several systemic fungicides and antibiotics in different concentrations were tested alone or in combination with others. The final composition of the semi-selective agar medium was established after several attempts in order to inhibit most of the fungal and bacterial saprophytes and favour the development of Xam. It contained PSA + cyclohexamide, cephalexin, pencycuron, triadimenol and tolylfluanid. The bacteria were recovered from naturally infected seeds by the direct plating of 2,000 surface disinfected seeds on the semi-selective medium. The recovery of the pathogen from naturally infected leaf tissues and in dilution plating, on semi-selective medium and on nutrient agar, were comparable. Among the three detection methods tested, the semi-selective medium was found to be the most reliable and quantifiable. Degree of severity of angular leaf spot in the field was not always correlated with the level of infection in the seed. This is the first report of a semi-selective agar medium to detect the presence of Xam in naturally infected cotton seed.