Low cost MPPT controller for a photovoltaic-based microgrid

 Photovoltaic based microgrid have been increasingly investigated in recent years, ascribable to their fundamental advantages such as the infinite energy source, environmentally friendly aspect and low upkeep cost. However, in practice, they are still considered as an expensive and low output option of renewable energy resources. To extract the maximum possible power from the output of the PV system, a reliable maximum power point tracker (MPPT) is required. Numerous studies have been conducted to introduce the best MPPT techniques suitable for different types of PV systems. However, they are mostly able to track the MPP from the PV system when the output signals (Voltage and Current) of individual array are available. In this study, a meta-heuristic method, based on particle swarm optimization theory, is used to determine the actual MPP of PV system, including several PV arrays, by only single current sensor at the output terminal. The results of the proposed PSO based technique, for tracking the global MPP in a multidimensional search space, have been presented at the end of this paper.

A novel fuzzy multi-objective framework to construct optimal prediction intervals for wind power forecast

The forecasting behavior of the high volatile and unpredictable wind power energy has always been a challenging issue in the power engineering area. In this regard, this paper proposes a new multi-objective framework based on fuzzy idea to construct optimal prediction intervals (Pis) to forecast wind power generation more sufficiently. The proposed method makes it possible to satisfy both the PI coverage probability (PICP) and PI normalized average width (PINAW), simultaneously. In order to model the stochastic and nonlinear behavior of the wind power samples, the idea of lower upper bound estimation (LUBE) method is used here. Regarding the optimization tool, an improved version of particle swam optimization (PSO) is proposed. In order to see the feasibility and satisfying performance of the proposed method, the practical data of a wind farm in Australia is used as the case study.

Simulation and hardware implementation of new maximum power point tracking technique for partially shaded PV system using hybrid DEPSO method

In photovoltaic (PV) power generation, partial shading is an unavoidable complication that significantly reduces the efficiency of the overall system. Under this condition, the PV system produces a multiple-peak function in its output power characteristic. Thus, a reliable technique is required to track the global maximum power point (GMPP) within an appropriate time. This study aims to employ a hybrid evolutionary algorithm called the DEPSO technique, a combination of the differential evolutionary (DE) algorithm and particle swarm optimization (PSO), to detect the maximum power point under partial shading conditions. The paper starts with a brief description about the behavior of PV systems under partial shading conditions. Then, the DEPSO technique along with its implementation in maximum power point tracking (MPPT) is explained in detail. Finally, Simulation and experimental results are presented to verify the performance of the proposed technique under different partial shading conditions. Results prove the advantages of the proposed method, such as its reliability, system-independence, and accuracy in tracking the GMPP under partial shading conditions.

Hybrid technique of ant colony and particle swarm optimization for short term wind energy forecasting

Wind farms are producing a considerable portion of the world renewable energy. Since the output power of any wind farm is highly dependent on the wind speed, the power extracted from a wind park is not always a constant value. In order to have a non-disruptive supply of electricity, it is important to have a good scheduling and forecasting system for the energy output of any wind park. In this paper, a new hybrid swarm technique (HAP) is used to forecast the energy output of a real wind farm located in Binaloud, Iran. The technique consists of the hybridization of the ant colony optimization (ACO) and particle swarm optimization (PSO) which are two meta-heuristic techniques under the category of swarm intelligence. The hybridization of the two algorithms to optimize the forecasting model leads to a higher quality result with a faster convergence profile. The empirical hourly wind power output of Binaloud Wind Farm for 364 days is collected and used to train and test the prepared model. The meteorological data consisting of wind speed and ambient temperature is used as the inputs to the mathematical model. The results indicate that the proposed technique can estimate the output wind power based on the wind speed and the ambient temperature with an MAPE of 3.513%.

Fuzzy logic controller optimized by particle swarm optimization for DC motor speed control

In this paper, we presented an optimized fuzzy logic controller using particle swarm optimization for DC motor speed control. The controller model is simulated using MATLAB software and also experimentally tested on a laboratory DC motor. A comparison of the performance of different controllers such as PID controller, fuzzy logic controller and optimized fuzzy logic controller is presented as well. With reference to the results of digital simulations and experiment, the designed FLC-PSO speed controller obtains much better dynamic behavior compared to PID and the normal FLC designed. Moreover, it can acquire superior performance of the DC motor, and also perfect speed tracking with no overshoot. The optimized membership functions (MFs) are obviously proved to be able to provide a better performance and higher robustness in comparison with a regular fuzzy model, when the MFs were heuristically defined. Besides, experimental results verify the ability of proposed FLC under sudden change of the load torque which leads to speed variances.

A new color space based on K-medoids clustering for fire detection

Pixel color has proven to be a useful and robust cue for detection of most objects of interest like fire. In this paper, a hybrid intelligent algorithm is proposed to detect fire pixels in the background of an image. The proposed algorithm is introduced by the combination of a computational search method based on a swarm intelligence technique and the Kemdoids clustering method in order to form a Fire-based Color Space (FCS), in fact, the new technique converts RGB color system to FCS through a 3*3 matrix. This algorithm consists of five main stages:(1) extracting fire and non-fire pixels manually from the original image. (2) using K-medoids clustering to find a Cost function to minimize the error value. (3) applying Particle Swarm Optimization (PSO) to search and find the best W components in order to minimize the fitness function. (4) reporting the best matrix including feature weights, and utilizing this matrix to convert the all original images in the database to the new color space. (5) using Otsu threshold technique to binarize the final images. As compared with some state-of-the-art techniques, the experimental results show the ability and efficiency of the new method to detect fire pixels in color images.

An efficient hybrid algorithm for fire flame detection

Proposing efficient methods for fire protection is becoming more and more important, because a small flame of fire may cause huge problems in social safety. In this paper, an effective fire flame detection method is investigated. This fire detection method includes four main stages: in the first step, a linear transformation is applied to convert red, green, and blue (RGB) color space through a 3∗3 matrix to a new color space. In the next step, fuzzy c-mean clustering method (FCM) is used to distinguish between fire flame and non-fire flame pixels. Particle Swarm Optimization algorithm (PSO) is also utilized in the last step to decrease the error value measured by FCM after conversion. Finally, we apply Otsu threshold method to the new converted images to make a binary picture. Empirical results show the strength, accuracy and fast-response of the proposed algorithm in detecting fire flames in color images.

O mutante pso9-1 de Saccharomyces cerevisiae, sensível a psoralenos fotoativados, contém um alelo mutante do gene MEC3 envolvido em checkpoint

Análises de complementação do mutante pso9-1, sensível a psoralenos mono- e bifuncionais fotoativados, UV254nm e nitrosoguanidina, com os mutantes pso1 a pso8, confirmou que este contém uma nova mutação pso. A clonagem molecular a partir de um banco genômico de levedura sugeriu pso9-1 como alelo mutante do gene de checkpoint que responde a danos no DNA MEC3. A não-complementação de vários fenótipos de sensibilidade em diplóides pso9-1/mec3∆ confirmou o alelismo dos dois mutantes. A sensibilidade à calcofluor white e à cafeína não foi aumentada nas linhagens pso9-1 e mec3∆, em relação as suas respectivas selvagens, sugerindo que o mutante pso9-1 não porta uma mutação na região promotora. O fenótipo mutante de mec3∆ foi levemente mais pronunciado para sensibilidade à 8-MOP + UVA e UVC, e para a supressão de mutação para frente induzida por UVC, sugerindo uma função residual para a proteína produzida por este alelo mutante.

Iniqüidade em saúde: uma extensão das desigualdades sociais no sistema público de saúde do Brasil (2003-2006)

This issue analises the unevenness in the brazilian system of public health care as an extension of socials inequities. It is a theoretical study based in a historical method, using empirical camp from academic, corporation and institution researchs, along the period 2002-2006. Equality and effectiveness in health systems are analitical basic cathegories grap in the root of the doctrine, principles and organization of the Unique Health System, in which sectorial actions are inserted. Discuss the estructural prodution and determined those inequalities through some social determiners of health system: income, land, food securitiy, nutritional situation, basic sanitation, epidemiological inequities and public management policy. Carry out a thematic review over health social production, it formlation and the goals of social policies, as well as the insertion of the equality principle in the assistance system, in the frame of the running public health regulations. It uses reflections that enlighted the correlation between the process of political-institutional actions and equity on health assistance. Analized the pertinency of sectorial reorganizational strategies on basic attendance, confronting the hipothesis that those strategies reinforce social inequities in health system, because it organize diferential assistance levels over not equal baselines. The results show up that social inequalities, even remaining, have had a small decrease; that the selectiviness of actual public policies and the duplication of the health system, increases the differences within and between the social classes and configures the assistance as inequal. The basic care system has great shortages that also appeares in middle and complex assistance levels. As conclusion, it remarks that the health assintance system, even with it integrality has limits; structural problems on material conditions of living and health system could not be reversed only with institutional legal arragements; by the contrary, in border conditions, these strategies produce policies that reinforce inequities, neglecting the equity principle of the system in which frame, they work. One patina of this tim

Estratégias de aplicações sequenciais e paralelas da metaheurística otimização por enxame de partículas ao problema do caixeiro viajante

Particle Swarm Optimization is a metaheuristic that arose in order to simulate the behavior of a number of birds in flight, with its random movement locally, but globally determined. This technique has been widely used to address non-liner continuous problems and yet little explored in discrete problems. This paper presents the operation of this metaheuristic, and propose strategies for implementation of optimization discret problems as form of execution parallel as sequential. The computational experiments were performed to instances of the TSP, selected in the library TSPLIB contenct to 3038 nodes, showing the improvement of performance of parallel methods for their sequential versions, in executation time and results

Otimização de superfícies seletivas de frequência com elementos pré-fractais utilizando rede neural MLP e algoritmos de busca populacional

This thesis describes design methodologies for frequency selective surfaces (FSSs) composed of periodic arrays of pre-fractals metallic patches on single-layer dielectrics (FR4, RT/duroid). Shapes presented by Sierpinski island and T fractal geometries are exploited to the simple design of efficient band-stop spatial filters with applications in the range of microwaves. Initial results are discussed in terms of the electromagnetic effect resulting from the variation of parameters such as, fractal iteration number (or fractal level), fractal iteration factor, and periodicity of FSS, depending on the used pre-fractal element (Sierpinski island or T fractal). The transmission properties of these proposed periodic arrays are investigated through simulations performed by Ansoft DesignerTM and Ansoft HFSSTM commercial softwares that run full-wave methods. To validate the employed methodology, FSS prototypes are selected for fabrication and measurement. The obtained results point to interesting features for FSS spatial filters: compactness, with high values of frequency compression factor; as well as stable frequency responses at oblique incidence of plane waves. This thesis also approaches, as it main focus, the application of an alternative electromagnetic (EM) optimization technique for analysis and synthesis of FSSs with fractal motifs. In application examples of this technique, Vicsek and Sierpinski pre-fractal elements are used in the optimal design of FSS structures. Based on computational intelligence tools, the proposed technique overcomes the high computational cost associated to the full-wave parametric analyzes. To this end, fast and accurate multilayer perceptron (MLP) neural network models are developed using different parameters as design input variables. These neural network models aim to calculate the cost function in the iterations of population-based search algorithms. Continuous genetic algorithm (GA), particle swarm optimization (PSO), and bees algorithm (BA) are used for FSSs optimization with specific resonant frequency and bandwidth. The performance of these algorithms is compared in terms of computational cost and numerical convergence. Consistent results can be verified by the excellent agreement obtained between simulations and measurements related to FSS prototypes built with a given fractal iteration

Técnicas de computação natural para segmentação de imagens médicas

Image segmentation is one of the image processing problems that deserves special attention from the scientific community. This work studies unsupervised methods to clustering and pattern recognition applicable to medical image segmentation. Natural Computing based methods have shown very attractive in such tasks and are studied here as a way to verify it's applicability in medical image segmentation. This work treats to implement the following methods: GKA (Genetic K-means Algorithm), GFCMA (Genetic FCM Algorithm), PSOKA (PSO and K-means based Clustering Algorithm) and PSOFCM (PSO and FCM based Clustering Algorithm). Besides, as a way to evaluate the results given by the algorithms, clustering validity indexes are used as quantitative measure. Visual and qualitative evaluations are realized also, mainly using data given by the BrainWeb brain simulator as ground truth

Maximização da penetração da geração distribuída através do algoritmo de otimização nuvem de partículas

This work develops a methodology for defining the maximum active power being injected into predefined nodes in the studied distribution networks, considering the possibility of multiple accesses of generating units. The definition of these maximum values is obtained from an optimization study, in which further losses should not exceed those of the base case, i.e., without the presence of distributed generation. The restrictions on the loading of the branches and voltages of the system are respected. To face the problem it is proposed an algorithm, which is based on the numerical method called particle swarm optimization, applied to the study of AC conventional load flow and optimal load flow for maximizing the penetration of distributed generation. Alternatively, the Newton-Raphson method was incorporated to resolution of the load flow. The computer program is performed with the SCILAB software. The proposed algorithm is tested with the data from the IEEE network with 14 nodes and from another network, this one from the Rio Grande do Norte State, at a high voltage (69 kV), with 25 nodes. The algorithm defines allowed values of nominal active power of distributed generation, in percentage terms relative to the demand of the network, from reference values

Avaliacao de dados de secagem de suspensoes de polpas de frutas em leito de jorro com alimentacao intermitente

The objective of this work was the development and improvement of the mathematical models based on mass and heat balances, representing the drying transient process fruit pulp in spouted bed dryer with intermittent feeding. Mass and energy balance for drying, represented by a system of differential equations, were developed in Fortran language and adapted to the condition of intermittent feeding and mass accumulation. Were used the DASSL routine (Differential Algebraic System Solver) for solving the differential equation system and used a heuristic optimization algorithm in parameter estimation, the Particle Swarm algorithm. From the experimental data food drying, the differential models were used to determine the quantity of water and the drying air temperature at the exit of a spouted bed and accumulated mass of powder in the dryer. The models were validated using the experimental data of drying whose operating conditions, air temperature, flow rate and time intermittency, varied within the limits studied. In reviewing the results predicted, it was found that these models represent the experimental data of the kinetics of production and accumulation of powder and humidity and air temperature at the outlet of the dryer

Projections Onto Convex Sets through Particle Swarm Optimization and its application for remote sensing image restoration

Image restoration attempts to enhance images corrupted by noise and blurring effects. Iterative approaches can better control the restoration algorithm in order to find a compromise of restoring high details in smoothed regions without increasing the noise. Techniques based on Projections Onto Convex Sets (POCS) have been extensively used in the context of image restoration by projecting the solution onto hyperspaces until some convergence criteria be reached. It is expected that an enhanced image can be obtained at the final of an unknown number of projections. The number of convex sets and its combinations allow designing several image restoration algorithms based on POCS. Here, we address two convex sets: Row-Action Projections (RAP) and Limited Amplitude (LA). Although RAP and LA have already been used in image restoration domain, the former has a relaxation parameter (A) that strongly depends on the characteristics of the image that will be restored, i.e., wrong values of A can lead to poorly restoration results. In this paper, we proposed a hybrid Particle Swarm Optimization (PS0)-POCS image restoration algorithm, in which the A value is obtained by PSO to be further used to restore images by POCS approach. Results showed that the proposed PSO-based restoration algorithm outperformed the widely used Wiener and Richardson-Lucy image restoration algorithms. (C) 2010 Elsevier B.V. All rights reserved.