Evidence for Spin Correlation in t(t)over-bar Production

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Measurements of WW and WZ Production in W plus jets Final States in p(p)over-bar Collisions

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Jet production rates in association with W and Z bosons in pp collisions at root s=7 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Exclusive gamma gamma -> mu(+)mu(-) production in proton-proton collisions at root s=7TeV

A measurement of the exclusive two-photon production of muon pairs in proton-proton collisions at root s = 7 TeV, pp -> p mu(+)mu(-) p, is reported using data corresponding to an integrated luminosity of 40 pb-1. For muon pairs with invariant mass greater than 11.5 GeV, transverse momentum p(T)(mu) > 4 GeV and pseudorapidity 1770.1) < 2.1, a fit to the dimuon p(T)(mu(+)mu(-)) distribution results in a measured cross section of sigma(p -> p mu(+)mu(-) p) - 3.38(-0.55)(+0.58) (stat.)+/- 0.16 (syst.) +/- 0.14 (lumi.) pb, consistent with the theoretical prediction evaluated with the event generator LPAIR. The ratio to the predicted cross section is 0.83+(0.14)(-0.13) (stat.) +/- 0.04 (syst.) +/- 0.03 (lumi.). The characteristic distributions of the muon pairs produced via Ty fusion, such as the muon acoplanarity, the muon pair invariant mass and transverse momentum agree with those from the theory.

Inclusive b-jet production in pp collisions at root s=7 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ratios of dijet production cross sections as a function of the absolute difference in rapidity between jets in proton-proton collisions at root s=7 TeV

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Production of biodiesel by esterification of palmitic acid over mesoporous aluminosilicate Al-MCM-41

Biodiesel has been obtained by esterification of palmitic acid with methanol, ethanol and isopropanol in the presence of Al-MCM-41 mesoporous molecular sieves with Si/Al ratios of 8.16 and 32. The catalytic acids were synthesized at room temperature and characterized by atomic absorption spectrometry (AAS), thermal analysis (TG/DTA), X-ray diffraction (XRD), nitrogen absorption (BET/BJH), infrared spectroscopy (IR), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The reaction was carried out at 130 degrees C whilst stirring at 500 rpm, with an alcohol/acid molar ratio of 60 and 0.6 wt% catalyst for 2 h. The alcohol reactivity follows the order methanol > ethanol > isopropanol. The catalyst Al-MCM-41 with ratio Si/Al = 8 produced the largest conversion values for the alcohols studied. The data followed a rather satisfactory approximation to first-order kinetics. (C) 2008 Elsevier Ltd. All rights reserved.

Dry matter production of shoots and root density of two cultivars of Lablab purpureus (L.) Sweet

This experiment was conducted in green house conditions to evaluate the DM accumulation in the shoots and in the roots of two cultivars of Lablab purpureus (L.) Sweet. A 2x3 factorial (two cultivars and three evaluation dates) was conducted according to a randomized complete block design with four replications, being the cultivars Highworth and Rongai evaluated at 42, 56, and 70 days after seedling emergence (DASE). The results indicated that the cvs. Highworth and Rongai have the same pattern of DM accumulation in the shoots. In the upper layer of the soil (0-0.20 in) it was found 38.83% and 43.64% of the DM accumulated in the roots down to 2.00 in depth, in the cvs. Highworth and Rongai, respectively. In the deepest layer (1.80-2.00 in) it was found 3.02% and 1.5% of the DM accumulated in the roots of the cvs. Highworth and Rongai, respectively. The root density showed a striking decrease upper layer from the soil (0-0.2 m) down to the depth of 0.60 0.80 in (from 10.83 to 1.75 cm.cm(-3) in the cv. Highworth and from 10.76 to 1.28 cm.cm(-3) in the cv. Rongai). At the bottom layer (1.80-2.00 in) the root density values were 0.98 cm.cm(-3) and 0.59 cm.cm(-3), respectively for the cvs. Highworth and Rongai. The root/shoot ratios were similar in both cvs. and decreased from 42 to 70 DASE showing that the cvs. evaluated had the same dynamics of DM accumulation.

HEAVY-LEPTON PRODUCTION IN THE MINIMAL SUPERSYMMETRIC STANDARD MODEL

We study the production of a charged-heavy-lepton pair considering the minimal supersymmetric standard model. We show that the cross section for the process pp --> gg --> l+l- is enhanced for large values of the ratio between the two-Higgs-doublet vacuum expectation values, in comparison with the standard model result. The gluon fusion mechanism is the most important contribution to the lepton pair production for M(l) > 50 GeV.

Optimization of the Transesterification Reaction in Biodiesel Production and Determination of Density and Viscosity of Biodiesel/Diesel Blends at Several Temperatures

Waste frying oil has been used to optimize the production of biodiesel. Biodiesel was prepared through sodium ethoxide catalyzed methanolysis from the transesterification of recycled waste frying oil. Optimization of the transesterification reaction for biodiesel production was carried out by means of statistical analyses using ANOVA. The optimum conditions for reaction were the following: a oil methanol mole ratio of 1:9, temperature of 50 degrees C, catalyst mass fraction of 0.9 %, and reaction time of 40 min, which enabled a yield of 98.7 % determined by gas chromatography/mass spectrometry (GC/MS) analysis. The density and viscosity of biodiesel/diesel blends have been determined as a function of composition at several temperatures.

Anticoccidial effects of coumestans from Eclipta alba for sustainable control of Eimeria tenella parasitosis in poultry production

The aim of this study was to evaluate the anticoccidial efficacy of a product containing coumestans from Eclipta alba. Experimental conditions were set up as to reproduce the environment conditions for husbandry adopted in commercial broiler farms. Broilers were raised in broiler chicken shed provided with feeders, drinkers, illumination and temperature control systems and floor covering to afford an adequate nourishing environment. Male Cobb broilers (240) were assigned to four experimental groups being each experimental group set apart in rice straw-covered shed isolated with wire mesh. One-day-old broilers were reared in a coccidian-free environment with ad libitum supply of filtered water and freely available standard feed, from the 1st to the 35th day of life. The T1 group received standard feed (negative control); T2 was treated with standard feed supplemented with 66 ppm of salinomycin (positive control); groups T3 and T4 had standard feed supplemented with the ethyl acetate fraction from methanolic extract of E. alba aerial parts, which contains the coumestans WL and DWL (120 and 180 ppm, respectively). The chicken broilers were individually infected with 2 x 104 oocysts of Eimeria tenella when they were 14 days old and were monitored weekly to evaluate zootechnical parameters such as weight gain and food conversion ratio. Counting of coccidial oocyst in chiken feces was assessed from random samples, from the 21st to 28th days of life, which corresponded to 7-14 days after the infection. Five chickens selected at random from each experimental group were subsequently euthanized at 21, 28 or 35 days of life to determine the lesion score in the cecal region and to excise a cecum portion for histopathological evaluation. The group treated with coumestans from E. alba presented an average weight gain and food conversion ratio higher than the negative control group and similar to the mean value of the positive control group. Coumestan-treated groups showed a significant decrease in the oocyst counting since the 21th day of life and displayed a reduced number of macroscopic lesions. Histopathological evaluations of cecum fragments showed that both treatments induced the migration of defense cells at the site of infection. A severe destruction of the cecal lining was found in the intestinal tract of broilers fed with a coumestans dose of 180 ppm. Overall, our results validate the use of a phytotherapy containing E. alba coumestans at a dose of 120 ppm as a therapeutic or prophylactic agent against avian coccidiosis. (C) 2010 Elsevier B.V. All rights reserved.

Estimates of genetic parameters, and cluster and principal components analyses of breeding values related to egg production traits in a White Leghorn population

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Lightning activity in Brazilian thunderstorms during TROCCINOX: implications for NOx production

During the TROCCINOX field experiment in January and February 2005, the contribution of lightning-induced nitrogen oxides (LNOx) from tropical and subtropical thunderstorms in Southern Brazil was investigated. Airborne trace gas measurements (NO, NOy, CO and O-3) were performed up to 12.5 km with the German research aircraft Falcon. During anvil penetrations in selected tropical and subtropical thunderstorms of 4 and 18 February, NOx mixing ratios were on average enhanced by 0.7-1.2 and 0.2-0.8 nmol mol(-1) totally, respectively. The relative contributions of boundary layer NOx (BL-NOx) and LNOx to anvil-NOx were derived from the NOx-CO correlations. on average similar to 80-90% of the anvil-NOx was attributed to LNOx. A Lightning Location Network (LINET) was set up to monitor the local distribution of cloud-to-ground (CG) and intra-cloud (IC) radiation sources (here called 'strokes') and compared with lightning data from the operational Brazilian network RINDAT (Rede Integrada Nacional de Deteccao de Descargas Atmosfericas). The horizontal LNOx mass flux out of the anvil was determined from the mean LNOx mixing ratio, the horizontal outflow velocity and the size of the vertical cross-section of the anvil, and related to the number of strokes contributing to LNOx. The values of these parameters were derived from the airborne measurements, from lightning and radar observations, and from a trajectory analysis. The amount of LNOx produced per LINET stroke depending on measured peak current was determined. The results were scaled up with the Lightning Imaging Sensor (LIS) flash rate (44 flashes s(-1)) to obtain an estimate of the global LNOx production rate. The final results gave similar to 1 and similar to 2-3 kg(N) per LIS flash based on measurements in three tropical and one subtropical Brazilian thunderstorms, respectively, suggesting that tropical flashes may be less productive than subtropical ones. The equivalent mean annual global LNOx nitrogen mass production rate was estimated to be 1.6 and 3.1 Tg a(-1), respectively. By use of LINET observations in Germany in July 2005, a comparison with the lightning activity in mid-latitude thunderstorms was also performed. In general, the same frequency distribution of stroke peak currents as for tropical thunderstorms over Brazil was found. The different LNOx production rates per stroke in tropical thunderstorms compared with subtropical and mid-latitude thunderstorms seem to be related to the different stroke lengths (inferred from comparison with laboratory data and observed lengths). In comparison, the impact of other lightning parameters as stroke peak current and stroke release height was assessed to be minor. The results from TROCCINOX suggest that the different vertical wind shear may be responsible for the different stroke lengths.

Production of Ti-35Nb alloy by powder metallurgy for aerospace application

Titanium and its alloys provide high strength-to-weight ratios, good fatigue strength and increased corrosion resistance compared with others materials. Its acceptance in aerospace has been limited by costs considerations such as high cost of raw material, high buy-to-fly ratios and expensive machining operations. Significant cost reductions can be obtained by vacuum sintering and powder metallurgy (P/M) techniques by producing near net shapes and consequently minimizing material waste and machining time. The Ti 35Nb alloy exhibit a low modulus of elasticity. Stemming from the unique combination of high strength, low modulus of elasticity and low density, this alloy is intrinsically more resistant to shock and explosion damages than most other engineering materials. Samples were produced by mixing of initial metallic powders followed by uniaxial and cold isostatic pressing with subsequent densification by sintering between 900 and 1600 °C, in vacuum. Sintering behavior was studied by means of dilatometry. Sintered samples were characterized for phase composition, microstructure and microhardness by X-ray diffraction, scanning electron microscopy and Vickers indentation, respectively. Density was measured by Archimedes method. Copyright © 2004 Society of Automotive Engineers, Inc.

Search for W H associated production in 5.3 fb(-1) of p(p)over-bar collisions at the Fermilab Tevatron

We present a search for associated production of Higgs and W bosons in pp̄ collisions at a center of mass energy of s=1.96 TeV in 5.3 fb-1 of integrated luminosity recorded by the D0 experiment. Multivariate analysis techniques are applied to events containing one lepton, an imbalance in transverse energy, and one or two b-tagged jets to discriminate a potential WH signal from Standard Model backgrounds. We observe good agreement between data and expected backgrounds, and set an upper limit of 4.5 (at 95% confidence level and for mH=115 GeV) on the ratio of the WH cross section multiplied by the branching fraction of H→bb̄ to its Standard Model prediction, which is consistent with an expected limit of 4.8. © 2011 Elsevier B.V.