1000 resultados para PER assay


Relevância:

20.00% 20.00%

Publicador:

Resumo:

Background: The diagnosis of invasive candidiasis is difficult because there are no specific clinical manifestations of the disease and colonization and infection are difficult to distinguish. In the last decade, much effort has been made to develop reliable tests for rapid diagnosis of invasive candidiasis, but none of them have found widespread clinical use. Results: Antibodies against a recombinant N-terminal fragment of the Candida albicans germ tube-specific antigen hyphal wall protein 1 (Hwp1) generated in Escherichia coli were detected by both immunoblotting and ELISA tests in a group of 36 hematological or Intensive Care Unit patients with invasive candidiasis and in a group of 45 control patients at high risk for the mycosis who did not have clinical or microbiological data to document invasive candidiasis. Results were compared with an immunofluorescence test to detect antibodies to C. albicans germ tubes (CAGT). The sensitivity, specificity, positive and negative predictive values of a diagnostic test based on the detection of antibodies against the N-terminal fragment of Hwp1 by immunoblotting were 27.8 %, 95.6 %, 83.3 % and 62.3 %, respectively. Detection of antibodies to the N-terminal fragment of Hwp1 by ELISA increased the sensitivity (88.9 %) and the negative predictive value (90.2 %) but slightly decreased the specificity (82.6 %) and positive predictive values (80 %). The kinetics of antibody response to the N-terminal fragment of Hwp1 by ELISA was very similar to that observed by detecting antibodies to CAGT. Conclusion: An ELISA test to detect antibodies against a recombinant N-terminal fragment of the C. albicans germ tube cell wall antigen Hwp1 allows the diagnosis of invasive candidiasis with similar results to those obtained by detecting antibodies to CAGT but without the need of treating the sera to adsorb the antibodies against the cell wall surface of the blastospore.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The alkaline comet assay is a method of detecting DNA strand breaks and alkali labile sites in individual cells. The method was used to detect DNA strand breaks in isolated blood cells (leukocytes) of carp (Cyprius carpio). DNA damage have been induced by exposure of the cells to sediment extract. Therefore comet assay can be applied as in vitro bioassay for investigations on toxicity of marine sediments.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

ENGLISH: We analyzed catches per unit of effort (CPUE) from the Japanese longline fishery for bigeye tuna (Thunnus obesus) in the central and eastern Pacific Ocean (EPO) with regression tree methods. Regression trees have not previously been used to estimate time series of abundance indices fronl CPUE data. The "optimally sized" tree had 139 parameters; year, month, latitude, and longitude interacted to affect bigeye CPUE. The trend in tree-based abundance indices for the EPO was similar to trends estimated from a generalized linear model and fronl an empirical model that combines oceanographic data with information on the distribution of fish relative to environmental conditions. The regression tree was more parsimonious and would be easier to implement than the other two nl0dels, but the tree provided no information about the nlechanisms that caused bigeye CPUEs to vary in time and space. Bigeye CPUEs increased sharply during the mid-1980's and were more variable at the northern and southern edges of the fishing grounds. Both of these results can be explained by changes in actual abundance and changes in catchability. Results from a regression tree that was fitted to a subset of the data indicated that, in the EPO, bigeye are about equally catchable with regular and deep longlines. This is not consistent with observations that bigeye are more abundant at depth and indicates that classification by gear type (regular or deep longline) may not provide a good measure of capture depth. Asimulated annealing algorithm was used to summarize the tree-based results by partitioning the fishing grounds into regions where trends in bigeye CPUE were similar. Simulated annealing can be useful for designing spatial strata in future sampling programs. SPANISH: Analizamos la captura por unidad de esfuerzo (CPUE) de la pesquería palangrera japonesa de atún patudo (Thunnus obesus) en el Océano Pacifico oriental (OPO) y central con métodos de árbol de regresión. Hasta ahora no se han usado árboles de regresión para estimar series de tiempo de índices de abundancia a partir de datos de CPUE. EI árbol de "tamaño optimo" tuvo 139 parámetros; ano, mes, latitud, y longitud interactuaron para afectar la CPUE de patudo. La tendencia en los índices de abundancia basados en árboles para el OPO fue similar a las tendencias estimadas con un modelo lineal generalizado y con un modelo empírico que combina datos oceanográficos con información sobre la distribución de los peces en relación con las condiciones ambientales. EI árbol de regresión fue mas parsimonioso y seria mas fácil de utilizar que los dos otros modelos, pero no proporciono información sobre los mecanismos que causaron que las CPUE de patudo valiaran en el tiempo y en el espacio. Las CPUE de patudo aumentaron notablemente a mediados de los anos 80 y fueron mas variables en los extremos norte y sur de la zona de pesca. Estos dos resultados pueden ser explicados por cambios en la abundancia real y cambios en la capturabilidad. Los resultados de un arbal de regresión ajustado a un subconjunto de los datos indican que, en el OPO, el patudo es igualmente capturable con palangres regulares y profundos. Esto no es consistente con observaciones de que el patudo abunda mas a profundidad e indica que clasificación por tipo de arte (palangre regular 0 profundo) podría no ser una buena medida de la profundidad de captura. Se uso un algoritmo de templado simulado para resumir los resultados basados en el árbol clasificando las zonas de pesca en zonas con tendencias similares en la CPUE de patudo. El templado simulado podría ser útil para diseñar estratos espaciales en programas futuros de muestreo. (PDF contains 45 pages.)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Experimental studies were conducted with the goals of 1) determining the origin of Pt- group element (PGE) alloys and associated mineral assemblages in refractory inclusions from meteorites and 2) developing a new ultrasensitive method for the in situ chemical and isotopic analysis of PGE. A general review of the geochemistry and cosmochemistry of the PGE is given, and specific research contributions are presented within the context of this broad framework.

An important step toward understanding the cosmochemistry of the PGE is the determination of the origin of POE-rich metallic phases (most commonly εRu-Fe) that are found in Ca, AJ-rich refractory inclusions (CAI) in C3V meteorites. These metals occur along with γNi-Fe metals, Ni-Fe sulfides and Fe oxides in multiphase opaque assemblages. Laboratory experiments were used to show that the mineral assemblages and textures observed in opaque assemblages could be produced by sulfidation and oxidation of once homogeneous Ni-Fe-PGE metals. Phase equilibria, partitioning and diffusion kinetics were studied in the Ni-Fe-Ru system in order to quantify the conditions of opaque assemblage formation. Phase boundaries and tie lines in the Ni-Fe-Ru system were determined at 1273, 1073 and 873K using an experimental technique that allowed the investigation of a large portion of the Ni-Fe-Ru system with a single experiment at each temperature by establishing a concentration gradient within which local equilibrium between coexisting phases was maintained. A wide miscibility gap was found to be present at each temperature, separating a hexagonal close-packed εRu-Fe phase from a face-centered cubic γNi-Fe phase. Phase equilibria determined here for the Ni-Fe-Ru system, and phase equilibria from the literature for the Ni-Fe-S and Ni-Fe-O systems, were compared with analyses of minerals from opaque assemblages to estimate the temperature and chemical conditions of opaque assemblage formation. It was determined that opaque assemblages equilibrated at a temperature of ~770K, a sulfur fugacity 10 times higher than an equilibrium solar gas, and an oxygen fugacity 106 times higher than an equilibrium solar gas.

Diffusion rates between -γNi-Fe and εRu-Fe metal play a critical role in determining the time (with respect to CAI petrogenesis) and duration of the opaque assemblage equilibration process. The diffusion coefficient for Ru in Ni (DRuNi) was determined as an analog for the Ni-Fe-Ru system by the thin-film diffusion method in the temperature range of 1073 to 1673K and is given by the expression:

DRuNi (cm2 sec-1) = 5.0(±0.7) x 10-3 exp(-2.3(±0.1) x 1012 erg mole-1/RT) where R is the gas constant and T is the temperature in K. Based on the rates of dissolution and exsolution of metallic phases in the Ni-Fe-Ru system it is suggested that opaque assemblages equilibrated after the melting and crystallization of host CAI during a metamorphic event of ≥ 103 years duration. It is inferred that opaque assemblages originated as immiscible metallic liquid droplets in the CAI silicate liquid. The bulk compositions of PGE in these precursor alloys reflects an early stage of condensation from the solar nebula and the partitioning of V between the precursor alloys and CAI silicate liquid reflects the reducing nebular conditions under which CAI were melted. The individual mineral phases now observed in opaque assemblages do not preserve an independent history prior to CAI melting and crystallization, but instead provide important information on the post-accretionary history of C3V meteorites and allow the quantification of the temperature, sulfur fugacity and oxygen fugacity of cooling planetary environments. This contrasts with previous models that called upon the formation of opaque assemblages by aggregation of phases that formed independently under highly variable conditions in the solar nebula prior to the crystallization of CAI.

Analytical studies were carried out on PGE-rich phases from meteorites and the products of synthetic experiments using traditional electron microprobe x-ray analytical techniques. The concentrations of PGE in common minerals from meteorites and terrestrial rocks are far below the ~100 ppm detection limit of the electron microprobe. This has limited the scope of analytical studies to the very few cases where PGE are unusually enriched. To study the distribution of PGE in common minerals will require an in situ analytical technique with much lower detection limits than any methods currently in use. To overcome this limitation, resonance ionization of sputtered atoms was investigated for use as an ultrasensitive in situ analytical technique for the analysis of PGE. The mass spectrometric analysis of Os and Re was investigated using a pulsed primary Ar+ ion beam to provide sputtered atoms for resonance ionization mass spectrometry. An ionization scheme for Os that utilizes three resonant energy levels (including an autoionizing energy level) was investigated and found to have superior sensitivity and selectivity compared to nonresonant and one and two energy level resonant ionization schemes. An elemental selectivity for Os over Re of ≥ 103 was demonstrated. It was found that detuning the ionizing laser from the autoionizing energy level to an arbitrary region in the ionization continuum resulted in a five-fold decrease in signal intensity and a ten-fold decrease in elemental selectivity. Osmium concentrations in synthetic metals and iron meteorites were measured to demonstrate the analytical capabilities of the technique. A linear correlation between Os+ signal intensity and the known Os concentration was observed over a range of nearly 104 in Os concentration with an accuracy of ~ ±10%, a millimum detection limit of 7 parts per billion atomic, and a useful yield of 1%. Resonance ionization of sputtered atoms samples the dominant neutral-fraction of sputtered atoms and utilizes multiphoton resonance ionization to achieve high sensitivity and to eliminate atomic and molecular interferences. Matrix effects should be small compared to secondary ion mass spectrometry because ionization occurs in the gas phase and is largely independent of the physical properties of the matrix material. Resonance ionization of sputtered atoms can be applied to in situ chemical analysis of most high ionization potential elements (including all of the PGE) in a wide range of natural and synthetic materials. The high useful yield and elemental selectivity of this method should eventually allow the in situ measurement of Os isotope ratios in some natural samples and in sample extracts enriched in PGE by fire assay fusion.

Phase equilibria and diffusion experiments have provided the basis for a reinterpretation of the origin of opaque assemblages in CAI and have yielded quantitative information on conditions in the primitive solar nebula and cooling planetary environments. Development of the method of resonance ionization of sputtered atoms for the analysis of Os has shown that this technique has wide applications in geochemistry and will for the first time allow in situ studies of the distribution of PGE at the low concentration levels at which they occur in common minerals.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Detection of biologically relevant targets, including small molecules, proteins, DNA, and RNA, is vital for fundamental research as well as clinical diagnostics. Sensors with biological elements provide a natural foundation for such devices because of the inherent recognition capabilities of biomolecules. Electrochemical DNA platforms are simple, sensitive, and do not require complex target labeling or expensive instrumentation. Sensitivity and specificity are added to DNA electrochemical platforms when the physical properties of DNA are harnessed. The inherent structure of DNA, with its stacked core of aromatic bases, enables DNA to act as a wire via DNA-mediated charge transport (DNA CT). DNA CT is not only robust over long molecular distances of at least 34 nm, but is also especially sensitive to anything that perturbs proper base stacking, including DNA mismatches, lesions, or DNA-binding proteins that distort the π-stack. Electrochemical sensors based on DNA CT have previously been used for single-nucleotide polymorphism detection, hybridization assays, and DNA-binding protein detection. Here, improvements to (i) the structure of DNA monolayers and (ii) the signal amplification with DNA CT platforms for improved sensitivity and detection are described.

First, improvements to the control over DNA monolayer formation are reported through the incorporation of copper-free click chemistry into DNA monolayer assembly. As opposed to conventional film formation involving the self-assembly of thiolated DNA, copper-free click chemistry enables DNA to be tethered to a pre-formed mixed alkylthiol monolayer. The total amount of DNA in the final film is directly related to the amount of azide in the underlying alkylthiol monolayer. DNA monolayers formed with this technique are significantly more homogeneous and lower density, with a larger amount of individual helices exposed to the analyte solution. With these improved monolayers, significantly more sensitive detection of the transcription factor TATA binding protein (TBP) is achieved.

Using low-density DNA monolayers, two-electrode DNA arrays were designed and fabricated to enable the placement of multiple DNA sequences onto a single underlying electrode. To pattern DNA onto the primary electrode surface of these arrays, a copper precatalyst for click chemistry was electrochemically activated at the secondary electrode. The location of the secondary electrode relative to the primary electrode enabled the patterning of up to four sequences of DNA onto a single electrode surface. As opposed to conventional electrochemical readout from the primary, DNA-modified electrode, a secondary microelectrode, coupled with electrocatalytic signal amplification, enables more sensitive detection with spatial resolution on the DNA array electrode surface. Using this two-electrode platform, arrays have been formed that facilitate differentiation between well-matched and mismatched sequences, detection of transcription factors, and sequence-selective DNA hybridization, all with the incorporation of internal controls.

For effective clinical detection, the two working electrode platform was multiplexed to contain two complementary arrays, each with fifteen electrodes. This platform, coupled with low density DNA monolayers and electrocatalysis with readout from a secondary electrode, enabled even more sensitive detection from especially small volumes (4 μL per well). This multiplexed platform has enabled the simultaneous detection of two transcription factors, TBP and CopG, with surface dissociation constants comparable to their solution dissociation constants.

With the sensitivity and selectivity obtained from the multiplexed, two working electrode array, an electrochemical signal-on assay for activity of the human methyltransferase DNMT1 was incorporated. DNMT1 is the most abundant human methyltransferase, and its aberrant methylation has been linked to the development of cancer. However, current methods to monitor methyltransferase activity are either ineffective with crude samples or are impractical to develop for clinical applications due to a reliance on radioactivity. Electrochemical detection of methyltransferase activity, in contrast, circumvents these issues. The signal-on detection assay translates methylation events into electrochemical signals via a methylation-specific restriction enzyme. Using the two working electrode platform combined with this assay, DNMT1 activity from tumor and healthy adjacent tissue lysate were evaluated. Our electrochemical measurements revealed significant differences in methyltransferase activity between tumor tissue and healthy adjacent tissue.

As differential activity was observed between colorectal tumor tissue and healthy adjacent tissue, ten tumor sets were subsequently analyzed for DNMT1 activity both electrochemically and by tritium incorporation. These results were compared to expression levels of DNMT1, measured by qPCR, and total DNMT1 protein content, measured by Western blot. The only trend detected was that hyperactivity was observed in the tumor samples as compared to the healthy adjacent tissue when measured electrochemically. These advances in DNA CT-based platforms have propelled this class of sensors from the purely academic realm into the realm of clinically relevant detection.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Part I

A study of the thermal reaction of water vapor and parts-per-million concentrations of nitrogen dioxide was carried out at ambient temperature and at atmospheric pressure. Nitric oxide and nitric acid vapor were the principal products. The initial rate of disappearance of nitrogen dioxide was first order with respect to water vapor and second order with respect to nitrogen dioxide. An initial third-order rate constant of 5.5 (± 0.29) x 104 liter2 mole-2 sec-1 was found at 25˚C. The rate of reaction decreased with increasing temperature. In the temperature range of 25˚C to 50˚C, an activation energy of -978 (± 20) calories was found.

The reaction did not go to completion. From measurements as the reaction approached equilibrium, the free energy of nitric acid vapor was calculated. This value was -18.58 (± 0.04) kilocalories at 25˚C.

The initial rate of reaction was unaffected by the presence of oxygen and was retarded by the presence of nitric oxide. There were no appreciable effects due to the surface of the reactor. Nitric oxide and nitrogen dioxide were monitored by gas chromatography during the reaction.

Part II

The air oxidation of nitric oxide, and the oxidation of nitric oxide in the presence of water vapor, were studied in a glass reactor at ambient temperatures and at atmospheric pressure. The concentration of nitric oxide was less than 100 parts-per-million. The concentration of nitrogen dioxide was monitored by gas chromatography during the reaction.

For the dry oxidation, the third-order rate constant was 1.46 (± 0.03) x 104 liter2 mole-2 sec-1 at 25˚C. The activation energy, obtained from measurements between 25˚C and 50˚C, was -1.197 (±0.02) kilocalories.

The presence of water vapor during the oxidation caused the formation of nitrous acid vapor when nitric oxide, nitrogen dioxide and water vapor combined. By measuring the difference between the concentrations of nitrogen dioxide during the wet and dry oxidations, the rate of formation of nitrous acid vapor was found. The third-order rate constant for the formation of nitrous acid vapor was equal to 1.5 (± 0.5) x 105 liter2 mole-2 sec-1 at 40˚C. The reaction rate did not change measurably when the temperature was increased to 50˚C. The formation of nitric acid vapor was prevented by keeping the concentration of nitrogen dioxide low.

Surface effects were appreciable for the wet tests. Below 35˚C, the rate of appearance of nitrogen dioxide increased with increasing surface. Above 40˚C, the effect of surface was small.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Encuesta realizada en el marco del proyecto “Implicaciones sociales de las migraciones transnacionales: más allá de las remesas. El caso del sistema migratorio entre países andinos y España”, con referencia CSO2009-08469 (subprograma SOCI). Este proyecto ha sido financiado por el Plan Nacional de I D i (2009-2012) del Ministerio de Ciencia e Innovación en su convocatoria de ayudas de Proyectos de Investigación Fundamental no orientada.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

In a multi-target complex network, the links (L-ij) represent the interactions between the drug (d(i)) and the target (t(j)), characterized by different experimental measures (K-i, K-m, IC50, etc.) obtained in pharmacological assays under diverse boundary conditions (c(j)). In this work, we handle Shannon entropy measures for developing a model encompassing a multi-target network of neuroprotective/neurotoxic compounds reported in the CHEMBL database. The model predicts correctly >8300 experimental outcomes with Accuracy, Specificity, and Sensitivity above 80%-90% on training and external validation series. Indeed, the model can calculate different outcomes for >30 experimental measures in >400 different experimental protocolsin relation with >150 molecular and cellular targets on 11 different organisms (including human). Hereafter, we reported by the first time the synthesis, characterization, and experimental assays of a new series of chiral 1,2-rasagiline carbamate derivatives not reported in previous works. The experimental tests included: (1) assay in absence of neurotoxic agents; (2) in the presence of glutamate; and (3) in the presence of H2O2. Lastly, we used the new Assessing Links with Moving Averages (ALMA)-entropy model to predict possible outcomes for the new compounds in a high number of pharmacological tests not carried out experimentally.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Passiflora alata Curtis, comumente conhecida como maracujá-doce, é uma das espécies do gênero Passiflora cultivadas comercialmente, sendo consumida in natura devido ao seu gosto adocicado. Ela também é utilizada em todo o mundo como ornamental e na medicina popular. O objetivo deste trabalho foi o estabelecimento de diferentes estratégias para a cultura in vitro de P. alata e a análise da produção de substâncias antioxidantes nos materiais obtidos in vitro, em comparação com as plantas in vivo. Diferentes tratamentos visando à quebra da dormência das sementes foram avaliados para a germinação in vitro ou in vivo, além da incubação das sementes sob tipos distintos de luz. Para o estabelecimento das culturas primárias, apices caulinares e segmentos nodais das plântulas derivadas da germinação in vitro foram cultivados em meio MSM . A taxa de alongamento dos brotos e o número de nós por brotos das culturas primárias foram aumentados pela adição de água de coco ao meio. Plantas derivadas dessas culturas foram utilizadas como fontes de explantes nodais, internodais e foliares. O potencial morfogênico de sementes sem tegumento foi também avaliado. Calos friáveis foram induzidos a partir de segmentos nodais e foliares na presença de PIC, e aqueles obtidos a partir de folhas em meio suplementado com PIC a 28,9 μM foram selecionados para o estabelecimento de culturas de células em suspensão. Após o desenvolvimento de diferentes estratégias in vitro para P. alata, folhas de plantas in vivo foram utilizadas para a avaliação de parâmetros que afetam a extração de substâncias antioxidante. O potencial antioxidante foi determinado pelo ensaio DPPH e o conteúdo de fenóis totais foi determinado utilizando o método Folin-Ciocalteau. Após o desenvolvimento do protocolo de extração, a atividade antioxidante dos diferentes materiais in vitro foi também avaliada. A eficiência antirradicalar variou entre os sistemas de cultura estudados, sendo diretamente proporcional ao conteúdo de fenóis totais dos extratos. Esses resultados indicam que as estratégias para cultura in vitro de P. alata desenvolvidas neste trabalho representam alternativas para a multiplicação de plantas e produção de substâncias fenólicas com ação antioxidante.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

A biodiversidade brasileira abrange plantas de importância medicinal que podem ser utilizadas na formulação de novos fármacos. Contudo, tem sido reduzida em velocidade alarmante, em função de diferentes ações antrópicas. A cultura de tecidos vegetais propicia a conservação e uso do germoplasma permitindo a obtenção de substâncias de importância medicinal. As leishmanioses são consideradas um problema de saúde pública mundial sendo a espécie Leishmania braziliensis de maior importância epidemiológica no Brasil. Recentemente tem-se registrado aumento da resistência à linha de tratamento usual. Do mesmo modo, o uso indiscriminado de antibióticos levou ao aumento de bactérias multirresistentes, que representam sério risco de infecção. A espécie Annona mucosa (Jacq.) possui substâncias, como acetogeninas e alcaloides, que apresentam atividades antiparasitária e antimicrobiana. Nesse sentido, o objetivo do trabalho foi avaliar o potencial leishmanicida e antibacteriano de extratos de A. mucosa de material produzido in vitro e in vivo. Foi proposto um protocolo de germinação in vitro, ainda não reportada para a espécie, com vistas à obtenção de plântulas axênicas. Em meio WPM foram cultivados explantes hipocotiledonares e foliares em meio MS, suplementados com PIC e diferentes concentrações de KIN, BAP ou TDZ. Os calos obtidos foram cultivados em meio líquido de mesma composição para a produção de suspensões celulares. Os materiais foram submetidos à extração metanólica e posterior fracionamento em hexano e diclorometano. Para a avaliação da atividade dos extratos sobre L. braziliensis foi usado o modelo in vitro, com a forma promastigota, e in vivo na forma amastigota, a partir do tratamento de macrófagos peritoneais de camundongos infectados com o parasito. Ambas as formas foram tratadas com os extratos por 96 e 48h, respectivamente. A atividade antimicrobiana foi avaliada por macrodiluição do extrato em Mueller-Hinton, sendo avaliado o crescimento das cepas após 16h de incubação a 48C. A germinação in vitro da espécie foi alcançada em substrato vermiculita estéril umedecido com solução de sais do meio MS, com taxa média de 85%. A maior produção de calos friáveis foi obtida em meios contendo KIN, com potencial uso para cultivo em suspensões celulares. Os extratos do material in situ e in vitro apresentaram atividade leishmanicida, apesar da toxicidade para macrófagos. Culturas de células em suspensão apresentaram potencial leishmanicida in vitro e redução da infecção em macrófagos. Os extratos do material avaliado apresentaram atividade antimicrobiana seletiva, com inibição do crescimento de Streptococcus pyogenes e Bacillus thurigiensis em diferentes concentrações avaliadas. Os métodos biotecnológicos empregados permitiram a obtenção de materiais com propriedades medicinais para as atividades leishmanicida e antibacteriana, assim como o material in vivo, constituindo este estudo o primeiro relato para as atividades propostas em A. mucosa.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Esta dissertação tem como objetivo apresentar uma estimativa preliminar do volume de recurso contingente não-convencionais de folhelhos oleígenos (oil shale) na Formação Tremembé através de métodos probabilísticos aplicados à informações compiladas de bibliografias existentes sobre a bacia. Como base para esta estimativa utilizou-se informações obtidas através de sísmica 2D, poços existentes na área e perfis geoquímicos. Através da interpretação dos mesmos foram gerados os valores de inputs para os parâmetros utilizados no cálculo, como: espessura econômica, densidade do minério e valor de Ensaio Fisher (Litros de óleo por tonelada de rocha). Para a análise foi construída uma planilha Excel no qual já descrito cada parâmetro do cálculo. Foi utilizado o software @Risk, da Palisade Inc., que é capaz de atribuir distribuições estatísticas a parâmetros utilizados no cálculo obtendo, a partir do método Monte Carlo, distribuições dos possíveis resultados. A metodologia apresentada se demonstra mais adequada ao caso em estudo que o método determinístico, devido a restrição e ausência da precisão dos dados o que aumentaria as incertezas e as chances de erro no cálculo do volume, podendo impossibilitar uma avaliação, no caso do segundo. A metodologia probabilística ao mesmo tempo em que permite uma avaliação preliminar na ausência de dados precisos, ela gera cenários probabilísticos de resultados, possibilitando a antecipação da tomada de decisões em um projeto, permitindo sua continuação ou abandono.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Analyses of sex-specific yield per recruit and spawning stock biomass per recruit were conducted to evaluate the current status of the sailfish (Istiophorus platypterus) fishery in the waters off eastern Taiwan. Natural mortality rates estimated from Pauly’s empirical equation were 0.26/yr for females and 0.27/yr for males. The current fishing mortality rates were estimated as 0.24/yr and 0.43/yr for females and males, respectively, which are much lower than the estimated F0 .1 (0.62/yr and 0.79/yr for females and males, respectively) and FSSB40 (0.46/yr for females) which are commonly used as target reference points in fisheries management. The effects of the fishing mortality, natural mortality, and age at first capture on the estimates of biological reference points were evaluated by using the Monte Carlo simulation. The results indicate that failure to consider the uncertainty in parameters such as natural mortality or age at first capture may lead to the improper estimation of biological reference points. This study indicates the possibility of current fishing mortality exceeding the target biological reference points may be negligible for sailfish in the waters off eastern Taiwan. However, in view of the recent rapid increase in fishing effort, it is evident that the stock status and development of the fishery need to be closely monitore