Operations management

The SAGE Course Companion on Operations Management is an accessible introduction to the subject that will help readers to extend their understanding of key concepts and enhance their thinking skills in line with course requirements. It provides support on how to revise for exams and prepare for and write assessed pieces. Readers are encouraged not only to think like an operations manager but also to think about the subject critically.

A virtual learning environment for operations management:Assessing the student's perspective

This paper describes a project aimed at assessing the experience of a virtual learning environment (VLE) among students studying courses in operations management. The project was supported by the Higher Education Funding Council for England (HEFCE) under its Teaching Quality Enhancement Fund (TQEF). The main aim of the project was through the use of a questionnaire to establish the student experience of using a VLE through an examination of the learning and technical features which they encountered. The study also examines the approaches to learning adopted by the students, through the inclusion of a shortened version of the approaches and study skills inventory for students (ASSIST) which the students were asked to complete.

Knowledge management systems:finding a way with technology

Purpose - To consider the role of technology in knowledge management in organizations, both actual and desired. Design/methodology/approach - Facilitated, computer-supported group workshops were conducted with 78 people from ten different organizations. The objective of each workshop was to review the current state of knowledge management in that organization and develop an action plan for the future. Findings - Only three organizations had adopted a strongly technology-based "solution" to knowledge management problems, and these followed three substantially different routes. There was a clear emphasis on the use of general information technology tools to support knowledge management activities, rather than the use of tools specific to knowledge management. Research limitations/implications - Further research is needed to help organizations make best use of generally available software such as intranets and e-mail for knowledge management. Many issues, especially human, relate to the implementation of any technology. Participation was restricted to organizations that wished to produce an action plan for knowledge management. The findings may therefore represent only "average" organizations, not the very best practice. Practical implications - Each organization must resolve four tensions: Between the quantity and quality of information/knowledge, between centralized and decentralized organization, between head office and organizational knowledge, and between "push" and "pull" processes. Originality/value - Although it is the group rather than an individual that determines what counts as knowledge, hardly any previous studies of knowledge management have collected data in a group context.

Insights into factors affecting production and operations management (POM) journal evaluation

The paper extends the current literature on peer review journal evaluations by providing a number of insights based on the diversity of Production and Operations Management (POM) research. We provide peer review evaluations for POM research outlets, based on a sampling frame that includes a large number of POM researchers worldwide. More specifically, the paper develops and tests various hypotheses as to whether the perceived quality and relevance of a journal is affected by such factors as: (i) nature of research work (empiricists versus modelers), (ii) society membership, (iii) research productivity, (iv) geographical location, and (v) seniority. Our findings suggest that caution must be exercised when utilizing existing POM journal rankings, as some factors, particularly the difference between empiricists and modelers, may influence journal evaluation. These must be considered when addressing issues such as faculty promotions, tenure, and salary. © 2006 Elsevier B.V. All rights reserved.

Using grounded theory for theory building in operations management research:a study on inter-firm relationship governance

Purpose – Qualitative theory building approaches, such as grounded theory method (GTM), are still not very widespread and rigorously applied in operations management (OM) research. Yet it is agreed that more systematic observation of current industrial phenomena is necessary to help managers deal with their problems. The purpose of this paper is to provide an example to help guide other researchers on using GTM for theory building in OM research. Design/methodology/approach – A GTM study in the German automotive industry consisting of 31 interviews is followed by a validation stage comprising a survey (110 responses) and a focus group. Findings – The result is an example of conducting GTM research in OM, illustrated by the development of the novel collaborative enterprise governance framework for inter-firm relationship governance in the German automotive industry. Research limitations/implications – GTM is appropriate for qualitative theory building research, but the resultant theories need further testing. Research is necessary to identify the transferability of the collaborative enterprise governance concept to other industries than automotive, to other organisational areas than R&D and to product and service settings that are less complex and innovative. Practical implications – The paper helps researchers make more informed use of GTM when engaging in qualitative theory building research in OM. Originality/value – There is a lack of explicit and well-informed use of GTM in OM research because of poor understanding. This paper addresses this deficiency. The collaborative enterprise governance framework is a significant contribution in an area of growing importance within OM.

Rules for mapping a conceptual model onto various data base management systems. Available in 2 volumes.

The design and implementation of data bases involve, firstly, the formulation of a conceptual data model by systematic analysis of the structure and information requirements of the organisation for which the system is being designed; secondly, the logical mapping of this conceptual model onto the data structure of the target data base management system (DBMS); and thirdly, the physical mapping of this structured model into storage structures of the target DBMS. The accuracy of both the logical and physical mapping determine the performance of the resulting systems. This thesis describes research which develops software tools to facilitate the implementation of data bases. A conceptual model describing the information structure of a hospital is derived using the Entity-Relationship (E-R) approach and this model forms the basis for mapping onto the logical model. Rules are derived for automatically mapping the conceptual model onto relational and CODASYL types of data structures. Further algorithms are developed for partly automating the implementation of these models onto INGRES, MIMER and VAX-11 DBMS.

An Investigation into the adoption and implementation of computer aided production management systems:using the Rogers model of adoption and implementation and a social constuctionist account of technology

The research investigates the processes of adoption and implementation, by organisations, of computer aided production management systems (CAPM). It is organised around two different theoretical perspectives. The first part is informed by the Rogers model of the diffusion, adoption and implementation of innovations, and the second part by a social constructionist approach to technology. Rogers' work is critically evaluated and a model of adoption and implementation is distilled from it and applied to a set of empirical case studies. In the light of the case study data, strengths and weaknesses of the model are identified. It is argued that the model is too rational and linear to provide an adequate explanation of adoption processes. It is useful for understanding processes of implementation but requires further development. The model is not able to adequately encompass complex computer based technologies. However, the idea of 'reinvention' is identified as Roger's key concept but it needs to be conceptually extended. Both Roger's model and definition of CAPM found in the literature from production engineering tend to treat CAPM in objectivist terms. The problems with this view are addressed through a review of the literature on the sociology of technology, and it is argued that a social constructionist approach offers a more useful framework for understanding CAPM, its nature, adoption, implementation, and use. CAPM it is argued, must be understood on terms of the ways in which it is constituted in discourse, as part of a 'struggle for meaning' on the part of academics, professional engineers, suppliers, and users.

Planning and implementing safety management systems

This thesis describes a study of the content and applicability of BS8800:1996 Guide to occupational health and safety management systems. The research is presented chronologically, with literature review and content analysis of SMS related guides and standards interwoven with two elements of qualitative empirical work. The first of these was carried out shortly after publication of BS8800 in 1996, a 'before-the-event' investigation of how organisations were intending to approach SMS implementation. The challenges faced by these organisations are reviewed against standard management theory, suggesting that the initial motivation for SMS implementation governs the approach organisations will adopt to guidance such as BS8800. The second phase of empirical work was undertaken in the context of OHSAS 18001, an auditable protocol based on BS8800, which allows organisations to certify their safety management systems. A discussion of the evolution of certifiable safety management system is presented, highlighting the similarities and differences between this, BS8800, SMS and wider management system standards. A case study then reviews the experiences of a catering company that implemented 18001, motivated by the opportunity for certification as a business benefit. The empirical work is used to comment on the guidance provided by BS8800, within its evolved role as guidance organisations may use for implementation of a SMS to be certified according to the specifications of OHSAS 18001. It is suggested that optimal implementation is facilitated by initial status review, continual improvement and the use of annexes, where there are used to make changes to the existing safety management system. This thesis concludes with a discussion of these elements, highlighting pertinent areas within BS8800 where revision or amendment may be appropriate.

A comparison of U.S. and Japanese management systems and their transferability to Singapore industry

This research compares U.S. and Japanese management systems and evaluates their transferability to the Singaporean manufacturing industry. The objectives were:- a) To determine the effectiveness of U.S. and Japanese management systems when applied to Singapore. b) Determine the extent of transferability of U.S. and Japanese management systems to Singapore. c) Survey general problems ecountered in the application of U.S. and Japanese management systems to the Singapore industry. The study using questionnaire survey and interviews covered a total of eighty companies from four groups of firms in four industrial sectors comprising of U.S. and Japanese subsidiaries based in Singapore and their respective parent companies. Data from the questionnaires and interviews were used to investigate environmental conditions, management philosophy, management functions/practices, management effectiveness, and firm productivity. Two-way analysis of variance was used to analyse the questionnaire data. The analysis of the perceptual data from the questionnaire survey and interviews suggested that both U.S. and Japanese parent companies performed better in almost all the management variables studied when compared to their subsidiaries in Singapore. U.S. subsidiaries have less difficulty in adjusting to the Singapore environmental conditions and obtained better results than the Japanese subsidiaries in management functions/practices and management philosophy than the U.S. subsidiaries. In addition, the firm productivity (in terms of labour and capital productivity) of U.S. subsidiaries in Singapore was found to be higher than those of the Japanese subsidiaries. It was found that the Japanese parent companies returned the highest score among the four groups of firms in all the four industrial sectors for all the four management variables (i.e. environmental conditions, management philosophy, management functions/practices, and management effectiveness) surveyed using questionnaires. In contrast, the average score for Japanese subsidiaries in Singapore was generally the lowest among the four groups of firms. Thus the results of this study suggest that the transfer of U.S. management system into the Singapore industry is more successful than the Japanese management system. The problems encountered in the application of U.S. and Japanese management in Singapore were identified and discussed by the study. General recommendations for the Singaporean manufacturing industry were then made based on the findings of the questionnaire survey and interview analysis.

The evolution and design of safety management systems

Research in safety management has been inhibited by lack of consensus as to the definitions of the terms with which it is concerned and, in general, the lack of an agreed theoretical framework within which to collate and contrast empirical findings. This thesis sets out definitions of key terms (hazard, risk, accident, incident and safety) and provides a theoretical framework. This framework has been informed by many sources but especially the Management Oversight and Risk Tree (MORT), cybernetics and the Viable System Model (VSM). Fieldwork designs are proposed for the empirical development of an analytical framework and its use to assist study of the development of safety management in organisations.

Greening operations management:an online sustainable procurement course for practitioners

In the Operations Management field, sustainable procurement has emerged as a way to green the purchasing and supply process. This paper explores issues in sustainable procurement training. The authors formed an interdisciplinary team to design, deliver and evaluate a training programme to promote and develop sustainable procurement in the United Kingdom health sector. Particular features of the project were its engagement with evolving and contested understandings of sustainable procurement and of the underlying concept of sustainable development and its recognition that relevant knowledge in the field is both incomplete and widely diffused through the procurement community. Eight practitioner groups worked together on themes to develop their understanding of sustainable procurement using the Blackboard virtual learning environment. Group interviews were conducted upon completion of the course and again three months later to explore qualitatively participants' experience of learning and implementing sustainable procurement. Although the course was delivered to practitioners, it might be modified for undergraduate and graduate students as it comprised the use of online activities in virtual learning environments, case studies and a broad range of literature. The course was also particularly significant in the context of contemporary policy moves in the United Kingdom and elsewhere to promote the role of higher education institutions in delivering workplace-based, high-skills education consistent with strategic policy considerations (see, for example, DIUS, 2008).