Composição química e aspectos morfológicos de mudas de Tabebuia chrysotricha (Standl.) produzidas em diferentes substratos e soluções de fertirrigação

The work aimed to study the formation of Tabebuia chrysotricha Standi, seedlings in function of four substrates, varying the covering fertilization solutions. To compose the substrate it was used fibrous and granulated coconut fiber obtaining the following treatments: 100% fibrous (100% F), 60% fibrous + 40% granulated (60% F+40% G), 40% fibrous + 60% granulated (40% F+60% G) and 100% granulated (100% G). The basis fertilization was the same for all treatments and the solutions of covering fertilization varied in order to obtain complete solutions with electric conductivities of 1.06 dS m-1, 2.12 dS m-1, 3.2 dS m-1 and 4.25 dS m-1. The propagative material was sowed directly in plastic containers (120mL) with the respective substrates. The fertilization was received through sub-irrigation once a week, respecting the treatments of fertilizations. Seedlings produced in 100%G had been taller and higher than the others. The chemical analyses of aerial part were obtained when the seedlings were ready for expedition (height of 20 cm). The seedlings production in substrate 100% F and 60% F+40% G allowed them to have higher N, S, B, Mn and Zn concentrations in the aerial part. The production of T. chrysotricha seedlings is recommended in granulated coconut fiber substrate and fertilizer solutions with EC of 1.06 dS m-1.

Acúmulo de macronutrientes por duas cultivares de cebola produzidas em sistema de semeadura direta

Economically, onion is the third more important vegetable in Brazil. As a consequence of the increasing by use of new hybrid varieties, the nutritional management of the crop needs to be adequately known. This research was carried out in São José do Rio Pardo, São Paulo State, Brazil, from March 7 to August 8, 2004. The objective was to quantify, under field conditions, the accumulation of macronutrients by onion cultivars established by direct sowing. The experimental design was in randomized blocks with three replicates. The cultivars studied were Optima and Superex. Samples were taken at 30, 50, 70, 90, 110, 130 and 150 days after sowing. With population of 354,000 plants ha -1 and productivity estimated in 64.8 t ha -1, 'Optima' extracted on 150 days after sowing: 78.77, 13.04, 75.77, 59.09, 11.70 and 24.38 kg ha -1 of N, P, K, Ca, Mg and S, respectively, and 'Superex', for the same plant population, and productivity at 72 t ha -1, 64.68, 10.33, 68.28, 65.58, 13.03 and 24.74 kg ha -1 of N, P, K, Ca, Mg and S, respectively. The Optima hybrid exported through its bulb about 49.17% of N, 60.60% of P, 61.16% of K, 41.15% of Ca, 43.56% of Mg, and 47.18 of S, the equivalent to 38.73, 7.90, 46.34, 24.32, 5.10 and 11.51 kg ha -1, respectively. The Superex hybrid exported through its bulb about 44.29% of N, 55.85% of P, 62.54% of K, 35.71% of Ca, 31.82% of Mg, and 48.80% of S, the equivalent to 28.65, 5.77, 42.70, 23.42, 4.15, and 12.07 kg ha -1, respectively.

A máscara chinesa: Notas sobre uso das fontes produzidas pelo aparato repressivo da ditadura militar

The methodological aspects which the historians face when using documents produced by the Brazilian military dictatorship on the leftist movements which intended to trigger the revolutionary struggle are analyzed. Whereas the strategy of the repressive regime in producing and establishing the 'truth' is enhanced, the resistance strategies of the political forces targeted by the repressive apparatus are investigated. The documents on the political organization called Marxist-Leninist Popular Movement have been employed.

Influência das técnicas de mínima quantidade de lubrificante, refrigeração otimizada e refrigeração convencional na qualidade de peças produzidas com aços endurecidos no processo de retificação

The influence of minimum lubrication, optimized and conventional cooling at different flows and application rates of cutting fluids on the quality of hardened-steel pieces produced by external cylindrical plunge grinding with super-abrasive grinding wheels with low CBN concentrations was verified. The analysis of the quality of the pieces was performed through the assessment of the behavior of the specific energy of the grinding, roughness, roundness deviation, and the generated residual stress. By analyzing of the application ways and of the several flows and application rates of the cutting fluid, one could encounter lubrication/cooling conditions that enable the reduction in cutting fluid volume, reduction in grinding time without compromising the dimensional parameters (superficial finishing, surface integrity). Regarding the different applications of cutting fluids, it could be noted the optimized application for higher velocities has presented the best performance, demonstrating the effectiveness of the new concept of nozzle utilized.

Avaliação histológica e morfométrica do retalho axial oris angularis e da terapia por ondas de choque aplicados a defeito palpebral experimental em cães

Considering that the cutaneous flap can be affected by isquemic complications the extra corporeal shock wave therapy (ESWT) was described as rescue techniques. The present study was developed to analyze histological and with morfometry, twenty one skin samples treated or not with the shock wave therapy, obtained from flap's distal border, used in this study to repair eyelids' experimental defects in dogs. The flap with or without ESWT did not show any histological sign of inflammatory or atrophic alterations. Both group treated showed similar morphometrical characteristics. The ESWT with the protocol used in this study (2500 impulses at 0,15 mJ/mm 2) did not demonstrate significant clinical outcomes as a rescue technique when applied over the oris angularis flap, however results showed no signals of collateral deleterious effects.

Influência da posição e tempo de irradiação sobre a capacidade de desinfecção em forno de micro-ondas

Objective: To evaluate the variations of temperature in 2 models of domestic micro-wave ovens, single emission (F 1) and dual emission of waves (F 2), to investigate areas of higher and lower intensity of the electromagnetic field. Materials and methods: A beaker containing water (60mL, 26°C) was irradiated into each of 5 positions (front - P 1; right - P 2; posterior - P 3; left - P 4; central - P 5) within each oven (900W/ 2min). To evaluate the effectiveness of disinfection in F 2, Bacillus subtilis suspension was irradiated in each of the 5 positions for 2, 4 and 6minutes. Data were analyzed by Kruskal-Wallis and nonparametric multiple comparisons at 5% significance level. Results: 84.80°C (F 1) and 92.01°C (F 2) were mean levels of temperature. For F 1, the positions P 1, P 2, P 3 and P 5 showed similar values among them and upper than P 4, while for F 2, the positions P 1, P 2 and P 4 were similar among them and upper than P 3 and P 5. Kruskal-Wallis test found significant differences between positions and models of ovens (p<0.05). It was observed that P 2 promoted bacterial death from 4min of irradiation, while the other positions promoted disinfection at 6min of irradiation. Conclusion: The protocols of position and time specified for the various procedures in microwave ovens can be different according to the characteristics of each device due to the electromagnetic field heterogeneity. © 2011 Sociedade Portuguesa de Estomatologia e Medicina Dentária.

Determinação da densidade mineral e da elasticidade óssea após a aplicação de ondas de choque extracorpóreas no terceiro metacarpiano de equinos atletas

The porpoise of this study was to evaluate the effects of extracorporeal shock waves in third metacarpus bone from healthy horses by determination of bone elasticity. It were used 20 Thoroughbred horses, male and female, with two years old, on top of training and selected as the state healthy. At the beginning of the experiment (D0), all animals were submitted for evaluation of bone elasticity held in the third metacarpus bone. The animals were divided into two groups (Control Group - CG and Experimental Group - EG). The application of extracorporeal shock wave therapy (ESWT) was performed on the right forelimb of the animals in the experimental group in the same place evaluated for bone elasticity and was used apparatus for extracorporeal therapy of waves with 0.15 mJ/mm2 energy flux density and 2000 pulses with E6R20 probe, with focus feature of the shock wave of 20 mm. The ESWT were repeated every 21 days, a total of three sessions (D0, D21 and D42). The analysis of bone elasticity determination was realized at D21, D42 and D72. The average of speed ultrasound differed between groups at D21, D42 and D72, and the animals from EG had lower bone mineral density after applications of ESWT. There was also difference in the analysis of bone mass (Z-Score) between the groups at D21 and D42, which animals from EG showed a significant decrease in bone mass. The risk of fracture was higher in animals from experimental group at D21. It was concluded that ESWT is able to promote change in bone mineral density.

Influência de pontas de pulverização e adjuvantes no potencial de redução de deriva em túnel de vento

The drift is intimately linked to inappropriate use of pesticides and an important factor for reducing it, is the correct selection of spray nozzles and adjuvants. The objective of this work was to evaluate the drift potential in wind tunnel with different spray nozzles and different concentrations of adjuvants. The experiment was composed by six spray solutions (vegetable oil (in three concentrations), mineral oil, surfactant and reducing drift), which were applied with two nozzles, one pre-orifice flat fan (DG 8003 VS) and other with air induction (AI 8003 VS), totaling 12 treatments, with three repetitions. The equipment used was a wind tunnel, where the drift collections were made at different points. The treatments averages were compared using Confidence Interval at 5% probability. The analysis of the percentage of drift showed that the treatments had different behaviors. The nonylphenol ethoxylate adjuvant presented the highest drift when applied with the nozzle of pre-orifice and the lowest drift when applied with the air induction. The behavior of these nozzles when the oil-based adjuvant was used showed apposite results to those obtained for the surfactant. For the DG nozzles the lowest percentage of drift, at all analyzed distances, was observed to the treatment with vegetable oil (1.0%) and with the AI nozzles the lower drift was found for the treatment with nonylphenol ethoxylate (0.0625%), for the four distances in the collection. The result showed that both the spray nozzles and adjuvants alter directly the drift potential. There was no proportionately between the concentration of the oil-based adjuvant and the drift percentage.

Software de rastreamento de embarcações e plataforma eletrônica para ensaios hidrodinâmicos em túnel de vento

Pós-graduação em Engenharia Elétrica - FEIS

Modelagem matemática da doença do caranguejo letárgico via ondas viajantes

Pós-graduação em Biometria - IBB

Purificação e caracterização bioquímica de tanases produzidas pelo fungo filamentoso Aspergillus phoenicis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Contribuição ao estudo bioquímico de frutas tropicais e exóticas produzidas no Brasil: pectina, açúcar e proteína

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo das atividades xilanásicas produzidas pelo fungo Aspergillus caespitosus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação do uso de radiação micro-ondas e ultrassom combinados com agentes químicos como pré-tratamentos de bagaço de cana-de-açúcar para posterior sacarificação enzimática

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Qualidade higiênico-sanitária de hortaliças produzidas pelos sistemas de cultivo orgânico e convencional, comercializadas na cidade de Araraquara-SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)