A preliminary characterization of the mutagenicity of atmospheric particulate matter collected during sugar cane harvesting using the Salmonella/microsome microsuspension assay

During sugar cane harvesting season, which occurs from May to November of each year, the crops are burnt, cut, and transported to the mills. There are reports showing that mutagenic activity and PAH content increase during harvesting season in some areas of Sao Paulo State in comparison with nonharvesting periods. The objective of this work was to preliminarily characterize the mutagenic activity of the total organic extracts as well as corresponding organic fractions of airborne particulate matter (PM) collected twice from two cities, Araraquara (ARQ) and Piracicaba (PRB), during sugar cane harvesting season using the Salmonella/microsome microssuspension assay. One sample collected in Sao Paulo metropolitan area was also included. The mutagenicity of the total extracts ranged from 55 to 320 revertants per cubic meter without the addition of S9 and from not detected to 57 revertants per cubic meter in the presence of S9 in areas with sugar cane plantations. Of the three fractions analyzed, the most polar ones (nitro and oxy) were the most potent. A comparison of the response of TA98 with YG1041 and the increased potencies without S9 indicated that nitro compounds are causing the observed effect. More studies are necessary to verify the sources of the mutagenic activity such as burning of vegetal biomass and combustion of heavy duty vehicles used to transport the sugar cane to the mills. The Salmonella/microsome assay can be an important tool to monitor the atmosphere for mutagenicity during sugar cane harvesting season.

Field report from sediment coring in peat for landscape analysis in Hjaltadalur, Skagafjörður, north Iceland 2010 : Sediment drilling in Hólar, Vidvik and Kolkuós, Hjaltadalur

This field report presents fieldwork undertaken in Hjaltadalur, Skagafjördur, northern Iceland during summer 2010. The main aim was to initiate coring in selected mires in order to determine the composition of organic material and sediments in the mires, sub-sample for sedimentological and palaeoecological analyses, and initiate advanced landscape analysis of Hjaltadalur. Three mires were selected for sediments coring in Hjaltadalur: Ástunga close to Kolkóus, Hólakot at Viðvik, and Hólar. All three represented a landscape transect in NW to SE direction, from close to the coast to valley interior, i.e. close to the old settlement at Hólar.

Desenvolvimento e caracterização de filtros cerâmicos para aplicações a altas temperaturas

Ceramic filters are cellular structures that can be produced by various techniques, among which we highlight the replication method, or method of polymeric sponge. This method consists of impregnating polymeric foam with ceramic slurry, followed by heat treatment, where will occur decomposition of organic material and the sinter of the ceramic material, resulting in a ceramic whose structure is a replica of the impregnated sponge. Ceramic filters have specific properties that make this type of material very versatile, used in various technological applications such as filters for molten metals and burners, make these materials attractive candidates for high temperature applications. In this work we studied the systems Al2O3-LZSA ceramic filters processed in the laboratory, and commercial Al2O3-SiC ceramics filters, both obtained by the replica method, this work proposes the thermal and mechanical characterization. The sponge used in the processing of filters made in the laboratory was characterized by thermogravimetric analysis. The ceramic filters were characterized by compressive strength, flexural strength at high temperatures, thermal shock, permeability and physical characterization (density and porosity) and microstructural (MEV and X-rays). From the results obtained, the analysis was made of the mechanical behavior of these materials, comparing the model proposed by Gibson and Ashby model and modified the effective area and the tension adjusted, where the modified model adapted itself better to the experimental results, representing better the mechanical behavior of ceramic filters obtained by the replica method

Kinetics and Adsorption Isotherms of Bisphenol A, Estrone, 17 beta-Estradiol, and 17 alpha-Ethinylestradiol in Tropical Sediment Samples

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Consorciação de braquiárias com milho outonal em plantio direto sob pivô central

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Qualidade Higiênico-Sanitária e Demanda de Cloro da Água de Dessedentação de Galinhas de Postura Coletadas em Bebedouros Tipo Nipple e Taça

O objetivo deste estudo foi avaliar a influência de dois tipos de bebedouros nipple e taça, utilizados na dessedentação de aves de postura e o incremento da demanda de cloro na água oferecida pelos dois tipos de bebedouros estudados. Foram realizadas as contagens de coliformes totais, coliformes fecais, Escherichia coli, estreptococos fecais e microrganismos mesófilos. Os resultados obtidos figuraram que as amostras de água dos reservatórios, de ambos os bebedouros, apresentaram-se contaminadas microbiologicamente antes de passarem pelos bebedouros. A contaminação por bactérias de poluição fecal foi maior nas amostras colhidas nos bebedouros tipo taça, assim como eles foram responsáveis por um maior acúmulo de matéria orgânica, tendo então uma elevada demanda de cloro e uma maior influência na depreciação da qualidade da água fornecida às aves. Dos dois tipos de bebedouros estudados, o tipo nipple mostrou ser o menos deletério no que concerne à qualidade da água entretanto, independente do tipo de bebedouro utilizado na dessedentação das aves, a desinfecção da água é um ato imprescindível à manutenção de sua qualidade e à eliminação de futuros patógenos.

EFFECT of DIFFERENT SOLID AMOUNTS IN THE PHYSICAL and MICROSCOPICAL PROPERTIES of SiC POROUS CERAMICS

The presence of pores in ceramics is directly related to the chosen forming process. So, in the starch consolidation method, the ceramics show, after burning, pores with morphology similar to that presented by this organic material. on the other hand, the increase in solid load leads up to alterations in dispersion viscosity, increasing the thermal stresses during drying and sintering processes. In order to verify the solid percentage influence in ceramic final properties, samples were prepared with silicon carbide in different compositions using or not starch as binder agent and pore forming element. The characterization of the ceramic pieces was performed by superficial roughness measurements, porosity besides by optical and scanning electron microscopy. The results showed ceramics with SiC and starch presented physical and microscopic properties slightly higher in relation to those with only ceramic powder in their composition. The presence of organic material, agglomerated and foam during the forming were essential for the final properties of the studied samples.

Translocação orgânica, produtividade e rendimento de óleo essencial de Mentha piperita L. cultivada em solução nutritiva com variação dos níveis de N, P, K e Mg

O estudo objetivou avaliar translocação orgânica, índices fisiológicos da análise de crescimento e rendimento do óleo essencial de Mentha piperita L. cultivada em solução nutritiva com variação dos níveis de N, P, K e Mg. Assim, foram avaliados os quatro tratamentos contendo 50% N, P, K, 25% Mg; 50% N, P, K, Mg; 65%N, 50%P, 25%K, 100% Mg e 100% N, P, K, Mg. A translocação orgânica foi avaliada por meio da determinação da razão de massa foliar (RMF) e da distribuição de massa seca para os diferentes órgãos. Os índices fisiológicos razão de área foliar (RAF), área foliar específica (AFE), taxa assimilatória líquida (TAL) e taxa de crescimento relativo (TCR) derivadas que compõem a análise de crescimento foram estimados pelo programa ANACRES, após ajuste exponencial quadrático da área foliar e massa seca de lâminas foliares e total da planta em relação ao tempo. O rendimento do óleo essencial, em porcentagem, foi calculado após extração da parte aérea por hidrodestilação. As plantas submetidas ao tratamento com nível completo de nutrientes (100%N/P/K/Mg) exportaram com menor eficiência o material orgânico a partir da folha e a RMF mostrou queda mais lenta, devido à retenção desse material por mais tempo no local de sua produção. Além disso, não apresentaram melhor produtividade e as curvas da TAL e TCR mostraram quedas mais lentas. As plantas submetidas ao tratamento com 65%N/50%P/25%K/100%Mg revelaram adequada exportação de matéria orgânica da folha para caule e pecíolos, conforme demonstra a RMF e a distribuição de massa seca para esses órgãos. Revelaram ainda a RAF mais elevada no inicio do desenvolvimento e mais baixa aos 94 DAT, indicando sombreamento das folhas como resultado de seu crescimento. A AFE dessas plantas mostrou menor variação durante o ciclo, refletindo espessura mais constante de suas folhas. A TAL e a TCR apresentaram curvas decrescentes, com quedas bem acentuadas em relação às demais plantas. Todos esses índices indicam melhor produtividade das plantas submetidas ao tratamento 65%N/50%P/25%K/100%Mg, que também apresentaram rendimento de óleo essencial, em média, maior durante o ciclo. Conclui-se que a redução de 35% de N, 50% de P, 75% de K (65%N/50%P/25%K/100%Mg) é indicada para o cultivo e extração de óleo essencial de M. piperita.

Análise do comportamento mecânico de espumas cerâmicas a base de alumina obtidas pelo método da réplica

Ceramics with porous cellular structure, called ceramic foams, have a potential use in several applications, such as: thermal insulation, catalyst supports, filters, and others. Among these techniques to obtain porous ceramics the replication method is an important process. This method consists of impregnation of a sponge (usually polymer) with ceramic slurry, followed by a heat treatment, which will happen the decomposition of organic material and sintering the ceramic material, resulting in a ceramic structure which is a replica of impregnated sponge. Knowledge of the mechanical properties of these ceramics is important for these materials can be used commercially. Gibson and Ashby developed a mathematical model to describe the mechanical behavior of cellular solids. This model wasn´t for describing the ceramics behavior produced by the replica method, because it doesn´t consider the defects from this type of processing. In this study were researched mechanical behavior of porous alumina ceramics obtained by the replica method and proposed modifications to the model of Gibson and Ashby to accommodate this material. The polymer sponge used in processing was characterized by thermogravimetric analysis and scanning electron microscopy. The materials obtained after sintering were characterized by mechanical strength tests on 4-point bending and compression, density and porosity and by scanning electron microscopy. From these results it was evaluated the mechanical strength behavior compared to Gibson and Ashby model for solid cellular structure and was proposed a correction of this model through a factor related to struts integrity degree, which consider fissures present in the structure of these materials besides defects geometry within the struts

Avaliação da degradação de macrófitas aquáticas descartadas em ambiente protegido

Com o intuito de buscar informações sobre a degradação de macrófitas aquáticas descartadas em pilhas, após ações do controle mecânico, foi conduzido um experimento no Departamento de Recursos Naturais - Ciências Ambientais, UNESP, campus de Botucatu-SP. Para atender o objetivo proposto, foram montadas pilhas com volume de 2,25 m³, compostas, principalmente, por três espécies de macrófitas, retiradas do reservatório da UHE Americana/SP. Foram coletadas amostras na montagem das pilhas, aos 15, 30, 60 e 90 dias, para o acompanhamento da temperatura da pilha e do pH do material orgânico durante o processo, além de uma análise química do composto ao final dos 90 dias. Os tratamentos foram: T1 - somente plantas aquáticas e revolvimento da pilha a cada sete dias; T2 - somente plantas aquáticas e revolvimento a cada quatro dias; T3 - plantas aquáticas + permagel, com revolvimento a cada sete dias; e T4 - plantas aquáticas + permagel e revolvimento a cada quatro dias. Utilizou-se o delineamento estatístico inteiramente casualizado, sendo a análise estatística realizada para coleta aos 90 dias, empregando o programa SISVAR. Concluiu-se que os resultados de macro e micronutrientes, temperatura, umidade, pH, relação C/N e redução do volume das pilhas foram semelhantes aos observados quando se procedeu ao descarte em pilhas com volume de 4,5 m³ sobre o solo.

Estudo da influência de compostos recalcitrantes na remoção de matéria orgânica biodegradável no tratamento de efluente de refinarias de petróleo

Petroleum Refinery wastewaters (PRW) have hart-to-degrade compounds, such as: phenols, ammonia, cyanides, sulfides, oils and greases and the mono and polynuclear aromatic hydrocarbons: benzene, toluene and xylene (BTX), acenaphthene, nitrobenzene and naphtalene. It is known that the microrganisms activity can be reduced in the presence of certain substances, adversely affecting the biological process of wastewater treatment. This research was instigated due the small number of studies regarding to this specific topic in the avaiable literature. This body of work ims to evaluate the effect of toxic substances on the biodegradability of the organic material found in PRW. Glucose was chosen as the model substrate due to its biodegradable nature. This study was divided into three parts: i) a survey of recalcitants compounds and the removal of phenol by using both biological and photochemical-biological processes; ii) biomass aclimation and iii) evaluation of the inhibitory effect certain compounds have on glucose biodegradation. The phenol degradation experiments were carried out in an activity sludge system and in a photochemical reactor. The results showed the photochemical-biological process to be more effective on phenol degradation, suggesting the superioruty of a combined photochemical-biological treatment when compared with a simple biological process for phenol removal from industry wastewaters. For the acclimation step, was used an activated sludge from industrial wastewaters. A rapid biomass aclimation to a synthetic solution composed of the main inhibitory compouns fpund in a PRW was obtained using the following operation condition: (pH = 7,0; DO ≥ 2,0 mg/L; RS = 20 days e qH = 31,2 and 20,4 hours), The last part was consisted of using respirometry evaluation toxicity effects of selected compounds over oxygen uptake rate to adaptated and non adaptated biomass in the presence of inhibitory compounds. The adaptated sludge showed greater degration capacity, with lower sensibility to toxic effects. The respirometry has proved to be very practical, as the techiniques used were simple and rapid, such as: Chemical Oxygen Demand (COD), Dissolved Oxygen (DO), and Volatile Suspended Solids (VSS). Using the latter it is possible to perform sludge selection to beggingthe process; thus allowing its use for aerobic treatment system`s behacior prediction

Vibrational spectroscopy applied to the study of archeological ceramic artifacts from Guarani culture in Brazil

An archeological artifact can be seen as a chronological element, which helps to determine the age of certain society and to understand the thinking, values and the way of life of this society. Thus, the classification of archeological artifacts is one of the approaches used to study the cultural system of antique societies trying to reconstruct their history. The "Centro de Museologia, Antropologia e Argueologia (CEMAARQ)" of the "Unesp Univ Estadual Paulista" in Presidente Prudente, São Paulo state, Brazil, develops projects within this context (identification and preservation). This is the case of the archeological site named "Lagoa São Paulo-02" discovered in 1993 at the margins of the Parana river in the region of Presidente Epitacio city, São Paulo state, Brazil. This site has ceramic fragments of different shapes and sizes that have a strong influence of traces of the Guarani culture, which is one of the Brazilian native populations. These samples were basically characterized via micro-Raman scattering and Fourier transform infrared absorption (FTIR) spectroscopies. The main objective was to identify the pigments used in the manufacture of the ceramic artifacts and to analyze the composition of the ceramic body to understand how the artifacts were made. Three pigments were found: red, black and white. For the red pigment were identified characteristic bands of hematite, an iron oxide found in the red rocks of the river banks that were eroded by water. The black pigment, probably, is due to the use of vegetal charcoal, which is found in nature as the product of burning organic material such as wood. For the white pigment, the FTIR spectra suggested the use of kaolin, either in the ceramic body or in the proper white pigment, due to the presence of the characteristic bands of the kaolinite. Complementary, the additives applied as anti-plastics were identified as charcoal and quartz, being the latter found in the rocks present in the archeological site. (C) 2010 Elsevier B.V. All rights reserved.

Diagnóstico ambiental das águas do estuário Jundiaí-Potengi pela determinação dos índices de qualidade da água e toxidez

This study is an environmental diagnosis of the Jundiaí-Potengi/RN estuarine system waters, using calculations of pollution indicator indices such as the Water Quality Index (WQI) and the Toxicity Index (TI). The samples were collected at twelve points on the estuary, at high and low tide, between August and November 2007, over four campaigns. The study area, located in a high impact region, has various activities on its banks such as: discharge of untreated or undertreated domestic and industrial sewage, shrimp farming, immunizer stabilization lakes, riverside communities, etc. All the parameters analyzed were compared to the limits of CONAMA Resolution No. 357 of 2005 for healthy and saline Class 1 waters. The results found prove the impact caused by various activities, mainly the parameters related to the presence of organic material, such as DQO, DBO, COT and thermotolerant colliforms. The IQA for most of the collection points was of medium quality. For the metals, although values above the Resolution limits were found, most of them were lower than the detection limits of ICP-OES used, indicating that they tend to be transported by the dynamic of the tides or rainfall and are deposited in bottom sediments, resulting in a TI of 1.0 in this water, when they are absent, which occurs in most cases, or 0.0, when heavy metals are found in these waters

Variáveis microbiológicas e produtividade do feijoeiro sob diferentes manejos do solo e calagem

O objetivo deste trabalho foi quantificar variáveis microbiológicas e produtividade do feijoeiro em razão do manejo do solo e da calagem. Parte de uma área cultivada há 20 anos em plantio direto (PD) foi submetida ao cultivo mínimo (CM), com escarificação a 0,25 m de profundidade, para incorporação do calcário. Os tratamentos consistiram de manejo do solo (PD e CM) e 0 e 2 t ha-1 de calcário dolomítico aplicadas na superfície, com quatro repetições. Os maiores valores de C da biomassa microbiana foram verificados no CM e os de C de CO2 liberado no PD sem calagem. A menor colonização micorrízica e a maior esporulação foram observadas no CM sem calagem. Não foram detectadas diferenças entre os tratamentos em relação à produção de matéria seca, enquanto na produtividade de grãos, o maior valor foi verificado no CM com calagem. É possível evitar a interrupção do PD com aplicação de calcário na superfície, visto que a incorporação do material de cobertura e a calagem pouco alteraram a estabilidade do sistema, conforme comprovado pelos valores estatísticos semelhantes de C do CO2 liberado e pelas pequenas diferenças observadas nas demais variáveis entre manejos.

Encapsulação de nanopartículas de magnetita em matriz de poli(metacrilato de metilacoácido metacrílico) por processo de polimerização em miniemulsão

Magnetic particles are systems with potential use in drug delivery systems, ferrofluids, and effluent treatment. In many situations, such as in biomedical applications, it is necessary to cover magnetic particles with an organic material, as polymers. In this work, magnetic particles were obtained through covering magnetite particles with poly(methyl methacrylate‐comethacrylic acid) via miniemulsion polymerization process. The resultant materials were characterized X‐ray diffraction (XRD), Fourier Transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), zeta potential (��) measurements and vibrating sample magnetometry (VSM). XRD results showed magnetite as the predominant cristalline phase in all samples and that cristallites had nanometric dimensions. Thermogravimetric analysis revealed an increase in polymer thermal stability as a result of magnetite encapsulation. TGA results showed also that the encapsulation efficiency was directly related to nanoparticles s hidrofobicity degree. VSM measurements showed that magnetic polymeric particles were superparamagnetic, so that they may be potentially used for magnetic (bio)separation