Étude des déterminants moléculaires de la signalisation des récepteurs couplés aux protéines G et développement d'outils pour l'étude de l'effecteur bêta-arrestine.

Les récepteurs couplés aux protéines G (RCPG) constituent la plus grande famille de protéines membranaires du génome humain. Ils transmettent les signaux extracellulaires provenant de plusieurs stimuli comme les odeurs, les ions, les hormones et les neurotransmetteurs, à l'intérieur des cellules. En se liant aux RCPGs, ces molécules contribuent à la stabilisation des changements conformationnels activateurs qui se propagent jusqu'au domaine intracellulaire des récepteurs. Ces derniers engagent ensuite un ou plusieurs effecteurs, comme les protéines G hétérotrimériques et les β-arrestines (βarrs), qui activent une cascade d'événements moléculaires menant à la réponse cellulaire.Récemment, la publication de structures cristallines de RCPGs liant des ligands diffusibles a offert une opportunité de raffiner à une résolution atomique les modèles des mécanismes de transduction des signaux. Dans la première partie de cette thèse, nous avons donc exploré les déterminants de la signalisation du récepteur prototypique β2-adrénergique (β2AR), induite par les β-bloqueurs. En ne tenant compte que de leur efficacités sur le β2AR dans les voies de l'adénylate cyclase (AC) et des protéines kinases activées par les facteurs mitogéniques (MAPK), les β-bloqueurs peuvent être classés en 3 groupes distincts (agoniste inverse AC / agoniste MAPK, antagoniste neutre AC / agoniste MAPK et agoniste inverse AC / agoniste inverse MAPK). Afin de déterminer le lien entre leur efficacité et leur mode de liaison, nous avons réalisé des expériences d'arrimages moléculaires in silico entre des β-bloqueurs de chacun des groupes et la structure cristalline du β2AR liée au carazolol. De manière intéressante, les ligands à l'intérieur d'un groupe partagent un mode de liaison, alors que ceux des ligands entre les groupes divergent, suggérant que le mode de liaison des β-bloqueurs pourrait être utilisé pour prédire leur l'efficacité. En accord avec cette hypothèse, nous avons prédit et confirmé l'efficacité agoniste MAPK du carazolol, un inverse agoniste AC du β2AR se liant au récepteur de manière similaire au groupe inverse agoniste AC / agoniste MAPK. De manière intéressante, le groupement aryl des ligands agonistes inverses agonistes AC / agoniste MAPK, le seul groupement chimique variable de ce groupe, est prédite pour lier la région des 3e et 5e hélices transmembranaires (TM3 et TM5). Nous avons donc émis l'hypothèse que cette région pourrait être un déterminant de l'efficacité de ces ligands. En accord avec cette dernière, la mutation de 2 résidus (T118I, S203A) localisés proches du site de liaison des groupements aryls des β-bloqueurs, prévient l'efficacité agoniste inverse de l'ICI-118551 sur la voie de l'AC sans affecter l'efficacité d'un agoniste, indiquant que cette région est importante pour la transmission de l'effet agoniste inverse, du moins sur la voie de l'AC. Les βarrs sont des protéines d'échafaudage qui coordonnent la formation de complexes avec plusieurs dizaines d'effecteurs de signalisation. Originalement identifiées pour leur rôle dans la désensibilisation et l'internalisation des RCPGs, elles sont aussi d'importants effecteurs de la signalisation des RCPGs indépendante des protéines G hétérotrimériques. Cependant, contrairement aux protéines G hétérotrimériques, il n'existe que peu d'outils pour les étudier. Ainsi, la deuxième partie de la thèse est dédiée au développement d'outils pour l'étude des βarrs. À cette fin, nous avons d'abord tenté de transposer une méthode de mesure de l'interaction entre 2 protéines par la technologie de transfert d'énergie de bioluminescence par résonance (BRET) en microscopie et chez des souris transgéniques afin de mesurer de manière subcellulaire et dans un contexte natif l'engagement de la βarr à des RCPGs. Ainsi, nous avons établi les preuves de principe que le BRET peut être utilisé pour localiser l'interaction entre la βarr et le récepteur de la vasopressine de type 2 (V2R) sur une cellule au microscope et pour détecter l'interaction entre la βarr et le β2AR sur des tissus de souris transgéniques exprimant ces protéines fusionnées avec des partenaires BRET. Finalement, il n'existe aucun inhibiteur pharmacologique ciblant les βarrs. Ainsi, grâce à la combinaison d'approches de criblage virtuel sur un modèle de la structure des βarrs et d'essais de validation cellulaire, nous avons développé un inhibiteur pharmacologique des βarrs. À l'aide de cet outil, nous avons confirmé l'implication des βarrs dans l'activation des MAPK par le V2R, mais aussi montré un nouveau rôle des βarrs dans le recyclage du β2AR. Les connaissances et outils développés dans cette thèse permettront de mieux comprendre les déterminants moléculaires de la signalisation des RCPGs et entre autres, grâce à des nouvelles approches pour étudier le rôle cellulaire et physiologique des βarrs.

Caractérisation de l’interaction entre la protéine Lin28 et le précurseur du microARN let-7g

La régulation de l’expression des gènes est ce qui permet à nos cellules de s’adapter à leur environnement, de combattre les infections ou, plus généralement, de produire la quantité exacte de protéine nécessaire pour répondre à un besoin spécifique. Parmi les joueurs les plus importants dans cette régulation de l’expression des gènes on retrouve les microARN (miARN). Ces petits ARN de 22 nucléotides sont présents chez la majorité des espèces multicellulaires et sont responsables du contrôle direct de plus de 30% des gènes exprimant des protéines chez les vertébrés. La famille de miARN lethal-7 (let-7) est composée de miARN parmi les plus connus et ayant des fonctions cruciales pour la cellule. La régulation du niveau des miARN let-7 est essentielle au bon développement cellulaire. La biogenèse de ces miARN, du transcrit primaire jusqu’à leur forme mature, est régulée principalement par Lin28, une protéine pluripotente très conservée. Cette protéine est composée d’un domaine cold shock (CSD) et de deux domaines de liaison au zinc. C’est grâce à ces domaines de liaison à l’ARN que Lin28 peut lier et inhiber la maturation des miARN let-7. L’objectif de cette thèse est de caractériser l’interaction entre Lin28 et le microARN précurseur let-7g afin de mieux comprendre le rôle de cette protéine dans l’inhibition de la biogenèse du miARN. À l’aide de techniques biochimiques et biophysiques, nous avons d’abord défini les principaux déterminants de l’interaction entre Lin28 et la boucle terminale du miARN précurseur let-7g (TL-let-7g). Nous avons conclu que le domaine C-terminal de Lin28, composé d’un motif riche en lysines et arginines ainsi que de deux motifs de liaison au zinc, permet à la protéine de lier spécifiquement et avec haute affinité un renflement riche en guanine conservé chez les précurseurs de la famille let-7. Aussi, parce que la séquence et la spécificité de liaison à l’ARN de ce domaine C-terminal sont semblables à celles de la protéine NCp7 du VIH, nous avons défini ce dernier comme le domaine NCp7-like de Lin28. Par la suite, nous avons caractérisé la multimérisation de trois protéines Lin28 sur la boucle terminale de pre-let-7g. Ceci a permis de réconcilier d’apparentes contradictions retrouvées dans la littérature actuelle concernant les sites de liaison de Lin28 lors de sa liaison aux miARN précurseurs. Nous avons identifié trois sites de liaison à haute affinité sur TL-let-7g qui sont liés dans un ordre précis par trois protéines Lin28. Lors de la formation du complexe multimérique, le CSD permet une déstabilisation de l’ARN, ce qui rend accessible plusieurs sites de liaison. Le domaine NCp7-like permet plutôt un assemblage ordonné de la protéine et facilite la liaison initiale de cette dernière. Ces nouveaux résultats rendent possible la mise au point d’un nouveau modèle de l’interaction entre Lin28 et le miARN précurseur let-7g. En conclusion, les études réalisées dans cette thèse apportent une meilleure compréhension des mécanismes moléculaires impliqués dans la régulation post-transcriptionnelle d’une importante famille de miARN et permettront de guider les futures études dans le domaine de recherche en pleine effervescence qu’est celui de la biogenèse des miARN.

Elucidating the crosstalk between condensin subunits and its relevance in chromosome condensation

ADN subit une série de transformations structurelles complexes au cours de la division cellulaire, ce qui entraîne dans son compactage chromosomes mitotiques par un processus appelé la condensation des chromosomes. Le complexe de condensine pentamérique est fortement impliqué comme un effecteur majeur de ce phénomène. Il s'agit d'un complexe protéine de sous-unités multiples avec deux sous-unités catalytiques [SMC- Structural Maintenance of Chromosomes] et de trois sous-unités de régulation, hautement conservés de la levure à l'homme. Le complexe de condensine dans Saccharomyces cerevisiae est constitué de deux sous-unités de SMC [Smc2 et Smc4] et trois protéines non réglementaires [Brn1, Ycs4, Ycg1]. Malgré son importance, le mécanisme d'action de condensine reste largement inconnu. Par conséquent, l'objectif de cette recherche est de comprendre le mécanisme d'action de condensine et comment elle est affectée par l'interaction entre ses sous-unités réglementaires et non-réglementaires. Cette thèse identifie quatre morphologies dépendants du cycle cellulaire distincts du locus d'ADNr. Cette transformation du phénotype ADNr de G1 à la mitose dépend condensine. Afin de déterminer le rôle de l'interaction entre les sous-unités catalytiques et réglementaires de condensine dans la régulation du complexe condensine, nous avons identifié six résidus positifs sur l'extrémité C-terminale de BRN1 qui affectent la formation du complexe condensine, l'activité de la condensation et l'interaction avec tubuline, ce qui suggère que ces résidus ont un rôle dans la régulation de condensine. Ensemble, nos résultats suggèrent un modèle de règlement du condensine par l'interaction entre les sous-unités de condensine.

Lier la spéciation chimique du cérium à sa biodisponibilité sous différentes conditions environnementales

L’étude qui suit porte sur l’évaluation du risque écotoxicologique du cérium, l’élément le plus exploité de la famille des lanthanides. La présence grandissante de ce métal dans notre quotidien rend possible son relargage dans l’environnement. Il est donc primordial de comprendre l’impact qu’il aura sur les organismes vivant dans un système aquatique. Une approche centrée sur le modèle du ligand biotique a été utilisée pour évaluer adéquatement l’interaction entre le cérium et un ligand biotique à la surface de l’algue unicellulaire Chlamydomonas reinhardtii. Pour mener une étude sur le risque écotoxicologique d’un élément métallique il faut, avant tout, comprendre la spéciation (répartition sous ses différentes formes chimiques) de l’élément en question. Les premières sections du mémoire vont donc traiter des expériences qui ont été menées pour évaluer la spéciation du cérium dans les conditions expérimentales d’exposition à C. reinhardtii. Il sera question de faire la distinction entre la forme particulaire du métal et sa forme dissoute, de caractériser ces changements par spectroscopie ainsi que d’évaluer le pouvoir complexant de la matière organique naturelle. Les résultats montrent une importante déplétion du métal dissout en solution à pH neutre et basique et une forte interaction avec la matière organique naturelle, peu importe le pH de la solution. Ensuite, les expériences de bioaccumulation seront expliquéesen comparant l’effet du pH, de la présence d’un ion compétiteur et de la présence de matière organique naturelle sur les paramètres d’internalisation du cérium. Les résultats indiquent qu’à pH acide, le comportement du cérium est plus prévisible qu’à pH neutre. Néanmoins, en tenant compte de la complexité des milieux naturels, l’interaction du métal avec les molécules complexantes va diminuer son risque d’interaction avec un organisme vivant.

Design and study of self-assembled functional organic and hybrid systems for biological applications

The focus of self-assembly as a strategy for the synthesis has been confined largely to molecules, because of the importance of manipulating the structure of matter at the molecular scale. We have investigated the influence of temperature and pH, in addition to the concentration of the capping agent used for the formation of the nano-bio conjugates. For example, the formation of the narrower size distribution of the nanoparticles was observed with the increase in the concentration of the protein, which supports the fact that γ-globulin acts both as a controller of nucleation as well as stabiliser. As analyzed through various photophysical, biophysical and microscopic techniques such as TEM, AFM, C-AFM, SEM, DLS, OPM, CD and FTIR, we observed that the initial photoactivation of γ-globulin at pH 12 for 3 h resulted in small protein fibres of ca. Further irradiation for 24 h, led to the formation of selfassembled long fibres of the protein of ca. 5-6 nm and observation of surface plasmon resonance band at around 520 nm with the concomitant quenching of luminescence intensity at 680 nm. The observation of light triggered self-assembly of the protein and its effect on controlling the fate of the anchored nanoparticles can be compared with the naturally occurring process such as photomorphogenesis.Furthermore,our approach offers a way to understand the role played by the self-assembly of the protein in ordering and knock out of the metal nanoparticles and also in the design of nano-biohybrid materials for medicinal and optoelectronic applications. Investigation of the potential applications of NIR absorbing and water soluble squaraine dyes 1-3 for protein labeling and anti-amyloid agents forms the subject matter of the third chapter of the thesis. The study of their interactions with various proteins revealed that 1-3 showed unique interactions towards serum albumins as well as lysozyme. 69%, 71% and 49% in the absorption spectra as well as significant quenching in the fluorescence intensity of the dyes 1-3, respectively. Half-reciprocal analysis of the absorption data and isothermal titration calorimetric (ITC) analysis of the titration experiments gave a 1:1 stoichiometry for the complexes formed between the lysozyme and squaraine dyes with association constants (Kass) in the range 104-105 M-1. We have determined the changes in the free energy (ΔG) for the complex formation and the values are found to be -30.78, -32.31 and -28.58 kJmol-1, respectively for the dyes 1, 2 and 3. Furthermore, we have observed a strong induced CD (ICD) signal corresponding to the squaraine chromophore in the case of the halogenated squaraine dyes 2 and 3 at 636 and 637 nm confirming the complex formation in these cases. To understand the nature of interaction of the squaraine dyes 1-3 with lysozyme, we have investigated the interaction of dyes 1-3 with different amino acids. These results indicated that the dyes 1-3 showed significant interactions with cysteine and glutamic acid which are present in the side chains of lysozyme. In addition the temperature dependent studies have revealed that the interaction of the dye and the lysozyme are irreversible. Furthermore, we have investigated the interactions of these NIR dyes 1-3 with β- amyloid fibres derived from lysozyme to evaluate their potential as inhibitors of this biologically important protein aggregation. These β-amyloid fibrils were insoluble protein aggregates that have been associated with a range of neurodegenerative diseases, including Huntington, Alzheimer’s, Parkinson’s, and Creutzfeldt-Jakob diseases. We have synthesized amyloid fibres from lysozyme through its incubation in acidic solution below pH 4 and by allowing to form amyloid fibres at elevated temperature. To quantify the binding affinities of the squaraine dyes 1-3 with β-amyloids, we have carried out the isothermal titration calorimetric (ITC) measurements. The association constants were determined and are found to be 1.2 × 105, 3.6× 105 and 3.2 × 105 M-1 for the dyes, 1-3, respectively. To gain more insights into the amyloid inhibiting nature of the squaraine dyes under investigations, we have carried out thioflavin assay, CD, isothermal titration calorimetry and microscopic analysis. The addition of the dyes 1-3 (5μM) led to the complete quenching in the apparent thioflavin fluorescence, thereby indicating the destabilization of β-amyloid fibres in the presence of the squaraine dyes. Further, the inhibition of the amyloid fibres by the squaraine dyes 1-3, has been evidenced though the DLS, TEM AFM and SAED, wherein we observed the complete destabilization of the amyloid fibre and transformation of the fibre into spherical particles of ca. These results demonstrate the fact that the squaraine dyes 1-3 can act as protein labeling agents as well as the inhibitors of the protein amyloidogenesis. The last chapter of the thesis describes the synthesis and investigation of selfassembly as well as bio-imaging aspects of a few novel tetraphenylethene conjugates 4-6.Expectedly, these conjugates showed significant solvatochromism and exhibited a hypsochromic shift (negative solvatochromism) as the solvent polarity increased, and these observations were justified though theoretical studies employing the B3LYP/6-31g method. We have investigated the self-assembly properties of these D-A conjugates though variation in the percentage of water in acetonitrile solution due to the formation of nanoaggregates. Further the contour map of the observed fluorescence intensity as a function of the fluorescence excitation and emission wavelength confirmed the formation of J-type aggregates in these cases. To have a better understanding of the type of self-assemblies formed from the TPE conjugates 4-6, we have carried out the morphological analysis through various microscopic techniques such as DLS, SEM and TEM. 70%, we observed rod shape architectures having ~ 780 nm in diameter and ~ 12 μM in length as evidenced through TEM and SEM analysis. We have made similar observations with the dodecyl conjugate 5 at ca. 70% and 50% water/acetonitrile mixtures, the aggregates formed from 4 and 5 were found to be highly crystalline and such structures were transformed to amorphous nature as the water fraction was increased to 99%. To evaluate the potential of the conjugate as bio-imaging agents, we have carried out their in vitro cytotoxicity and cellular uptake studies though MTT assay, flow cytometric and confocal laser scanning microscopic techniques. Thus nanoparticle of these conjugates which exhibited efficient emission, large stoke shift, good stability, biocompatibility and excellent cellular imaging properties can have potential applications for tracking cells as well as in cell-based therapies. In summary we have synthesized novel functional organic chromophores and have studied systematic investigation of self-assembly of these synthetic and biological building blocks under a variety of conditions. The investigation of interaction of water soluble NIR squaraine dyes with lysozyme indicates that these dyes can act as the protein labeling agents and the efficiency of inhibition of β-amyloid indicate, thereby their potential as anti-amyloid agents.

Development of Electrochemical and Fluorescent Sensors

Chemical sensors have growing interest in the determination of food additives, which are creating toxicity and may cause serious health concern, drugs and metal ions. A chemical sensor can be defined as a device that transforms chemical information, ranging from the concentration of a specific sample component to total composition analysis, into an analytically useful signal. The chemical information may be generated from a chemical reaction of the analyte or from a physical property of the system investigated. Two main steps involved in the functioning of a chemical sensor are recognition and transduction. Chemical sensors employ specific transduction techniques to yield analyte information. The most widely used techniques employed in chemical sensors are optical absorption, luminescence, redox potential etc. According to the operating principle of the transducer, chemical sensors may be classified as electrochemical sensors, optical sensors, mass sensitive sensors, heat sensitive sensors etc. Electrochemical sensors are devices that transform the effect of the electrochemical interaction between analyte and electrode into a useful signal. They are very widespread as they use simple instrumentation, very good sensitivity with wide linear concentration ranges, rapid analysis time and simultaneous determination of several analytes. These include voltammetric, potentiometric and amperometric sensors. Fluorescence sensing of chemical and biochemical analytes is an active area of research. Any phenomenon that results in a change of fluorescence intensity, anisotropy or lifetime can be used for sensing. The fluorophores are mixed with the analyte solution and excited at its corresponding wavelength. The change in fluorescence intensity (enhancement or quenching) is directly related to the concentration of the analyte. Fluorescence quenching refers to any process that decreases the fluorescence intensity of a sample. A variety of molecular rearrangements, energy transfer, ground-state complex formation and collisional quenching. Generally, fluorescence quenching can occur by two different mechanisms, dynamic quenching and static quenching. The thesis presents the development of voltammetric and fluorescent sensors for the analysis of pharmaceuticals, food additives metal ions. The developed sensors were successfully applied for the determination of analytes in real samples. Chemical sensors have multidisciplinary applications. The development and application of voltammetric and optical sensors continue to be an exciting and expanding area of research in analytical chemistry. The synthesis of biocompatible fluorophores and their use in clinical analysis, and the development of disposable sensors for clinical analysis is still a challenging task. The ability to make sensitive and selective measurements and the requirement of less expensive equipment make electrochemical and fluorescence based sensors attractive.

The electronic structure of anionic halide complexes of element 105 in aqueous solutions and their extraction by aliphatic amines

To study the complex formation of group 5 elements (Nb, Ta, Ha, and pseudoanalog Pa) in aqueous HCI solutions of medium and high concentrations the electronic structures of anionic complexes of these elements [MCl_6]^-, [MOCl_4]^-, [M(OH)-2 Cl_4]^-, and [MOCl_5]^2- have been calculated using the relativistic Dirac-Slater Discrete-Variational Method. The charge density distribution analysis has shown that tantalum occupies a specific position in the group and has the highest tendency to form the pure halide complex, [TaCl_6-. This fact along with a high covalency of this complex explains its good extractability into aliphatic amines. Niobium has equal trends to form pure halide [NbCl_6]^- and oxyhalide [NbOCl_5]^2- species at medium and high acid concentrations. Protactinium has a slight preference for the [PaOCl_5]^2- form or for the pure halide complexes with coordination number higher than 6 under these conditions. Element 105 at high HCl concentrations will have a preference to form oxyhalide anionic complex [HaOCl_5]^2- rather than [HaCl_6]^-. For the same sort of anionic oxychloride complexes an estimate has been done of their partition between the organic and aqueous phases in the extraction by aliphatic amines, which shows the following succession of the partition coefficients: P_Nb < P_Ha < P_Pa.

Characterization of DnmA, the Dnmt2 homolog in Dictyostelium discoideum

Eukaryotic DNA m5C methyltransferases (MTases) play a major role in many epigenetic regulatory processes like genomic imprinting, X-chromosome inactivation, silencing of transposons and gene expression. Members of the two DNA m5C MTase families, Dnmt1 and Dnmt3, are relatively well studied and many details of their biological functions, biochemical properties as well as interaction partners are known. In contrast, the biological functions of the highly conserved Dnmt2 family, which appear to have non-canonical dual substrate specificity, remain enigmatic despite the efforts of many researchers. The genome of the social amoeba Dictyostelium encodes Dnmt2-homolog, the DnmA, as the only DNA m5C MTase which allowed us to study Dnmt2 function in this organism without interference by the other enzymes. The dnmA gene can be easily disrupted but the knock-out clones did not show obvious phenotypes under normal lab conditions, suggesting that the function of DnmA is not vital for the organism. It appears that the dnmA gene has a low expression profile during vegetative growth and is only 5-fold upregulated during development. Fluorescence microscopy indicated that DnmA-GFP fusions were distributed between both the nucleus and cytoplasm with some enrichment in nuclei. Interestingly, the experiments showed specific dynamics of DnmA-GFP distribution during the cell cycle. The proteins colocalized with DNA in the interphase and were mainly removed from nuclei during mitosis. DnmA functions as an active DNA m5C MTase in vivo and is responsible for weak but detectable DNA methylation of several regions in the Dictyostelium genome. Nevertheless, gel retardation assays showed only slightly higher affinity of the enzyme to dsDNA compared to ssDNA and no specificity towards various sequence contexts, although weak but detectable specificity towards AT-rich sequences was observed. This could be due to intrinsic curvature of such sequences. Furthermore, DnmA did not show denaturant-resistant covalent complexes with dsDNA in vitro, although it could form covalent adducts with ssDNA. Low binding and methyltransfer activity in vitro suggest the necessity of additional factor in DnmA function. Nevertheless, no candidates could be identified in affinity purification experiments with different tagged DnmA fusions. In this respect, it should be noted that tagged DnmA fusion preparations from Dictyostelium showed somewhat higher activity in both covalent adduct formation and methylation assays than DnmA expressed in E.coli. Thus, the presence of co-purified factors cannot be excluded. The low efficiency of complex formation by the recombinant enzyme and the failure to define interacting proteins that could be required for DNA methylation in vivo, brought up the assumption that post-translational modifications could influence target recognition and enzymatic activity. Indeed, sites of phosphorylation, methylation and acetylation were identified within the target recognition domain (TRD) of DnmA by mass spectrometry. For phosphorylation, the combination of MS data and bioinformatic analysis revealed that some of the sites could well be targets for specific kinases in vivo. Preliminary 3D modeling of DnmA protein based on homology with hDNMT2 allowed us to show that several identified phosphorylation sites located on the surface of the molecule, where they would be available for kinases. The presence of modifications almost solely within the TRD domain of DnmA could potentially modulate the mode of its interaction with the target nucleic acids. DnmA was able to form denaturant-resistant covalent intermediates with several Dictyostelium tRNAs, using as a target C38 in the anticodon loop. The formation of complexes not always correlated with the data from methylation assays, and seemed to be dependent on both sequence and structure of the tRNA substrate. The pattern, previously suggested by the Helm group for optimal methyltransferase activity of hDNMT2, appeared to contribute significantly in the formation of covalent adducts but was not the only feature of the substrate required for DnmA and hDNMT2 functions. Both enzymes required Mg2+ to form covalent complexes, which indicated that the specific structure of the target tRNA was indispensable. The dynamics of covalent adduct accumulation was different for DnmA and different tRNAs. Interestingly, the profiles of covalent adduct accumulation for different tRNAs were somewhat similar for DnmA and hDNMT2 enzymes. According to the proposed catalytic mechanism for DNA m5C MTases, the observed denaturant-resistant complexes corresponded to covalent enamine intermediates. The apparent discrepancies in the data from covalent complex formation and methylation assays may be interpreted by the possibility of alternative pathways of the catalytic mechanism, leading not to methylation but to exchange or demethylation reactions. The reversibility of enamine intermediate formation should also be considered. Curiously, native gel retardation assays showed no or little difference in binding affinities of DnmA to different RNA substrates and thus the absence of specificity in the initial enzyme binding. The meaning of the tRNA methylation as well as identification of novel RNA substrates in vivo should be the aim of further experiments.

Analysis of the SDS−Lysozyme binding isotherm

A scheme to describe SDS−lysozyme complex formation has been proposed on the basis of isothermal titration calorimetry (ITC) and FTIR spectroscopy data. ITC isotherms are convoluted and reveal a marked effect of both SDS and lysozyme concentration on the stoichiometry of the SDS−lysozyme complex. The binding isotherms have been described with the aid of FTIR spectroscopy in terms of changes in the lysozyme structure and the nature of the SDS binding. At low SDS concentrations, ITC isotherms feature an exothermic region that corresponds to specific electrostatic binding of SDS to positively charged amino acid residues on the lysozyme surface. This leads to charge neutralization of the complex and precipitation. The number of SDS molecules that bind specifically to lysozyme is approximately 8, as determined from our ITC isotherms, and is independent of lysozyme solution concentration. At high SDS concentrations, hydrophobic cooperative association dominates the binding process. Saturated binding stoichiometries as a molar ratio of SDS per molecule of lysozyme range from 220:1 to 80:1, depending on the lysozyme solution concentration. A limiting value of 78:1 has been calculated for lysozyme solution concentrations above 0.25 mM.

Structural and equilibrium studies on mixed ligand complexes of Co(II), Ni(II), Cu(II) and Zn(II) with N-(2-benzimidazolyl)methyliminodiacetic acid and typical N,N donor ligands

Mixed ligand complexes: [Co(L)(bipy)] (.) 3H(2)O (1), [Ni(L)(phen)] (.) H2O (2), [Cu(L)(phen)] (.) 3H(2)O (3) and [Zn(L)(bipy)] (.) 3H(2)O (4), where L2- = two -COOH deprotonated dianion of N-(2-benzimidazolyl)methyliminodiacetic acid (H(2)bzimida, hereafter, H,L), bipy = 2,2' bipyridine and phen = 1,10-phenanthroline have been isolated and characterized by elemental analysis, spectral and magnetic measurements and thermal studies. Single crystal X-ray diffraction studies show octahedral geometry for 1, 2 and 4 and square pyramidal geometry for 3. Equilibrium studies in aqueous solution (ionic strength I = 10(-1) mol dm(-3) (NaNO3), at 25 +/- 1 degrees C) using different molar proportions of M(II):H2L:B, where M = Co, Ni, Cu and Zn and B = phen, bipy and en (ethylene diamine), however, provides evidence of formation of mononuclear and binuclear binary and mixed ligand complexes: M(L), M(H-1L)(-), M(B)(2+), M(L)(B), M(H-1L)(B)(-), M-2(H-1L)(OH), (B)M(H-1L)M(B)(+), where H-1L3- represents two -COOH and the benzimidazole NI-H deprotonated quadridentate (O-, N, O-, N), or, quinquedentate (O-, N, O-, N, N-) function of the coordinated ligand H,L. Binuclear mixed ligand complex formation equilibria: M(L)(B) + M(B)(2+) = (B)M(H-1L)M(B)(+) + H+ is favoured with higher pi-acidity of the B ligands. For Co(II), Ni(II) and Cu(II), these equilibria are accompanied by blue shift of the electronic absorption maxima of M(II) ions, as a negatively charged bridging benzimidazolate moiety provides stronger ligand field than a neutral one. Solution stability of the mixed ligand complexes are in the expected order: Co(II) < Ni(II) < Cu(II) > Zn(II). The Delta logK(M) values are less negetive than their statistical values, indicating favoured formation of the mixed ligand complexes over the binary ones. (c) 2005 Elsevier B.V. All rights reserved.

The component polypeptide chains of bovine insulin nucleate or inhibit aggregation of the parent protein in a conformation-dependent manner

Amyloid fibrils are typically rigid, unbrariched structures with diameters of similar to 10 nm and lengths up to several micrometres, and are associated with more than 20 diseases including Alzheimer's disease and type II diabetes. Insulin is a small, predominantly alpha-helical protein consisting of 51 residues in two disulfide-linked polypeptide chains that readily assembles into amyloid fibrils under conditions of low PH and elevated temperature. We demonstrate here that both the A-chain and the B-chain of insulin are capable of forming amyloid fibrils in isolation under similar conditions, with fibrillar morphologies that differ from those composed of intact insulin. Both the A-chain and B-chain fibrils were found to be able to cross-seed the fibrillization of the parent protein, although these reactions were substantially less efficient than self-seeding with fibrils composed of full-length insulin. In both cases, the cross-seeded fibrils were morphologically distinct from the seeding, material, but shared common characteristics with typical insulin fibrils, including a very similar helical repeat. The broader distribution of heights of the cross-seeded fibrils compared to typical insulin fibrils, however, indicates that their underling protofilament hierarchy may be subtly different. In addition, and remarkably in view of this seeding behavior, the soluble forms of the A-chain and B-chain peptides were found to be capable of inhibiting insulin fibril formation. Studies using mass spectrometry suggest that this behavior might be attributable to complex formation between insulin and the A-chain and B-chain peptides. The finding that the same chemical form of a polypeptide chain in different physical states can either stimulate or inhibit the conversion of a protein into amyloid fibrils sheds new light on the mechanisms underlying fibril formation, fibril strain propagation and amyloid disease initiation and progression. (c) 2006 Elsevier Ltd. All rights reserved.

Design, synthesis and computational modelling of aromatic tweezer-molecules as models for chain-folding polymer blends

Novel 'tweezer-type' complexes that exploit the interactions between pi-electron-rich pyrenyl groups and pi-electron deficient diimide units have been designed and synthesised. The component molecules leading to complex formation were accessed readily from commercially available starting materials through short and efficient syntheses. Analysis of the resulting complexes, using the visible charge-transfer band, revealed association constants that increased sequentially from 130 to 11,000 M-1 as increasing numbers of pi-pi-stacking interactions were introduced into the systems. Computational modelling was used to analyse the structures of these complexes, revealing low-energy chain-folded conformations for both components, which readily allow close, multiple pi-pi-stacking and hydrogen bonding to be achieved. In this paper, we give details of our initial studies of these complexes and outline how their behaviour could provide a basis for designing self-healing polymer blends for use in adaptive coating systems. (C) 2008 Elsevier Ltd. All rights reserved.

Analysis of the SDS-lysozyme binding isotherm

A scheme to describe SDS-lysozyme complex formation has been proposed on the basis of isothermal titration calorimetry (ITC) and FTIR spectroscopy data. ITC isotherms are convoluted and reveal a marked effect of both SDS and lysozyme concentration on the stoichiometry of the SDS-lysozyme complex. The binding isotherms have been described with the aid of FTIR spectroscopy in terms of changes in the lysozyme structure and the nature of the SDS binding. At low SDS concentrations, ITC isotherms feature an exothermic region that corresponds to specific electrostatic binding of SDS to positively charged amino acid residues on the lysozyme surface. This leads to charge neutralization of the complex and precipitation. The number of SDS molecules that bind specifically to lysozyme is approximately 8, as determined from our ITC isotherms, and is independent of lysozyme solution concentration. At high SDS concentrations, hydrophobic cooperative association dominates the binding process. Saturated binding stoichiometries as a molar ratio of SDS per molecule of lysozyme range from 220: 1 to 80: 1, depending on the lysozyme solution concentration. A limiting value of 78: 1 has been calculated for lysozyme solution concentrations above 0.25 mM.

Isopimaric acid from Pinus nigra shows activity against multidrug-resistant and EMRSA strains of Staphylococcus aureus

The diterpene isopimaric acid was extracted from the immature cones of Pinus nigra (Arnold) using bioassay. guided fractionation of a crude hexane extract. Isopimaric acid was assayed against multidrug-resistant (MDR) and methicillin-resistant Staphylococcus aureus (MRSA). The minimum inhibitory concentrations (MIC) were 32-64 mu g/mL and compared with a commercially obtained resin acid, abietic acid, with MICs of 64 mu g/mL. Resin acids are known to have antibacterial activity and are valued in traditional medicine for their antiseptic properties: These results show that isopimaric acid is active against MDR an MRSA strains of S. aureus which are becoming, increasingly resistant to antibiotics. Both compounds were evaluated for modulation activity in combination with antibiotics, but did not potentiate the activity of the antibiotics tested. However, the compounds were also assayed in combination with the efflux pump inhibitor reserpine, to ice if inhibition of the TetK or NorA efflux pump increased their activity. Interestingly, rather than a potentiation of activity by a reduction in MIC, a two to four-fold increase in MIC was seen. It may he that isopimaric acid and abietic acid are not substrates for these efflux pumps, but it is also possible that an antagonistic interaction with reserpine may render the antibiotics inactive. H-1-NMR of abietic acid and reserpine taken individually and in combination, revealed a shift in resonance of some peaks for both compounds when mixed together compared with the spectra of the compounds on their own. It is proposed that this may he due to complex formation between abietic acid and reserpine and that this complex formation is responsible for a reduction in activity and elevation of MIC. Copyright (c) 2005 John Wiley & Sons, Ltd.

Novel temperature-responsive water-soluble copolymers based on 2-hydroxyethylacrylate and vinyl butyl ether and their interactions with poly(carboxylic acids)

Novel water-soluble amphiphilic copolymers have been synthesized by free radical copolymerization of 2-hydroxyethylacrylate with vinyl butyl ether. In water these copolymers exhibit lower critical solution temperature, which depends on the content of hydrophobic vinyl butyl ether units. The interaction between these copolymers and poly(acrylic acid) or poly(methacrylic acid) in aqueous solutions results in formation of interpolymer complexes stabilized by hydrogen bonds and hydrophobic interactions. An increase in hydrophobicity of the copolymers leads to the enhancement of their complex formation ability with respect to poly(acrylic acid) and poly(methacrylic acid). Poly(methacrylic acid) forms stronger complexes with the copolymers when compared with poly(acrylic acid). The complexes exhibit dual sensitivity to pH- and temperature and this property may be easily adjusted regulating the strength of interaction. (c) 2005 Wiley Periodicals, Inc.