Failure to launch: The self-regulating Md -MYB10R6 gene from apple is active in flowers but not leaves of Petunia

Coloured foliage due to anthocyanin pigments (bronze/red/black) is an attractive trait that is often lacking in many bedding, ornamental and horticultural plants. Apples (Malus × domestica) containing an allelic variant of the anthocyanin regulator, Md-MYB10R6, are highly pigmented throughout the plant, due to autoregulation by MYB10 upon its own promoter. We investigated whether Md-MYB10R6 from apple is capable of functioning within the heterologous host Petunia hybrida to generate plants with novel pigmentation patterns. The Md-MYB10R6 transgene (MYB10–R6pro:MYB10:MYB10term) activated anthocyanin synthesis when transiently expressed in Antirrhinumroseadorsea petals and petunia leaf discs. Stable transgenic petunias containing Md-MYB10R6 lacked foliar pigmentation but had coloured flowers, complementing the an2 phenotype of ‘Mitchell’ petunia. The absence of foliar pigmentation was due to the failure of the Md-MYB10R6 gene to self-activate in vegetative tissues, suggesting that additional protein partners are required for Md-MYB10 to activate target genes in this heterologous system. In petunia flowers, where endogenous components including MYB-bHLH-WDR (MBW) proteins were present, expression of the Md-MYB10R6 promoter was initiated, allowing auto-regulation to occur and activating anthocyanin production. Md-MYB10 is capable of operating within the petunia MBW gene regulation network that controls the expression of the anthocyanin biosynthesis genes, AN1 (bHLH) and MYBx (R3-MYB repressor) in petals.

The potential for production of freeze-dried oral vaccines using alginate hydrogel microspheres as protein carriers

Oral administration of dry vaccine formulations is acknowledged to offer major clinical and logistical benefits by eliminating the cold chain required for liquid preparations. A model antigen, bovine serum albumin (BSA) was encapsulated in alginate microspheres using aerosolisation. Hydrated microspheres 25 to 65 μm in size with protein loading of 3.3 % w/w were obtained. Environmental scanning electron microscopy indicated a stabilizing effect of encapsulated protein on alginate hydrogels revealed by an increase in dehydration resistance. Freeze drying of alginate microspheres without use of a cryoprotectant resulted in fragmentation and subsequent rapid loss of the majority of the protein load in simulated intestinal fluid in 2 h, whereas intact microspheres were observed following freeze-drying of BSA-loaded microspheres in the presence of maltodextrin. BSA release from freeze-dried preparations was limited to less than 7 % in simulated gastric fluid over 2 h, while 90 % of the protein load was gradually released in simulated intestinal fluid over 10 h. SDS-PAGE analysis indicated that released BSA largely preserved its molecular weight. These findings demonstrate the potential for manufacturing freeze-dried oral vaccines using alginate microspheres.

Genome-wide meta-analysis identifies 56 bone mineral density loci and reveals 14 loci associated with risk of fracture

Bone mineral density (BMD) is the most widely used predictor of fracture risk. We performed the largest meta-analysis to date on lumbar spine and femoral neck BMD, including 17 genome-wide association studies and 32,961 individuals of European and east Asian ancestry. We tested the top BMD-associated markers for replication in 50,933 independent subjects and for association with risk of low-trauma fracture in 31,016 individuals with a history of fracture (cases) and 102,444 controls. We identified 56 loci (32 new) associated with BMD at genome-wide significance (P < 5 × 10−8). Several of these factors cluster within the RANK-RANKL-OPG, mesenchymal stem cell differentiation, endochondral ossification and Wnt signaling pathways. However, we also discovered loci that were localized to genes not known to have a role in bone biology. Fourteen BMD-associated loci were also associated with fracture risk (P < 5 × 10−4, Bonferroni corrected), of which six reached P < 5 × 10−8, including at 18p11.21 (FAM210A), 7q21.3 (SLC25A13), 11q13.2 (LRP5), 4q22.1 (MEPE), 2p16.2 (SPTBN1) and 10q21.1 (DKK1). These findings shed light on the genetic architecture and pathophysiological mechanisms underlying BMD variation and fracture susceptibility.

Localization of type 1 diabetes susceptibility to the MHC class I genes HLA-B and HLA-A

The major histocompatibility complex (MHC) on chromosome 6 is associated with susceptibility to more common diseases than any other region of the human genome, including almost all disorders classified as autoimmune. In type 1 diabetes the major genetic susceptibility determinants have been mapped to the MHC class II genes HLA-DQB1 and HLA-DRB1 (refs 1–3), but these genes cannot completely explain the association between type 1 diabetes and the MHC region4, 5, 6, 7, 8, 9, 10, 11. Owing to the region's extreme gene density, the multiplicity of disease-associated alleles, strong associations between alleles, limited genotyping capability, and inadequate statistical approaches and sample sizes, which, and how many, loci within the MHC determine susceptibility remains unclear. Here, in several large type 1 diabetes data sets, we analyse a combined total of 1,729 polymorphisms, and apply statistical methods—recursive partitioning and regression...

A methodological survey of future mobility literature: Opportunities for design research

This research establishes that the study of mobility and transportation is multi-disciplinary and highly complex, involving the diverse interplay between infrastructural and psychological factors. Coincidently, a new paradigm in personal mobility is developing. A new generation of mobility solutions is becoming widely available in the form of car and ride sharing services. These services build on the assumption that customers no longer need ownership of a product in order to benefit from it. With the emergence of this new paradigm, this paper presents a methodological review of current practises used by the wider research community. Therefore, this research piece aims to explore methodological approaches involved in the study the effect of community on an individual’s attitudes, perceptions and behaviours of future mobility solutions. The results of this review indicate that the majority of published literature uses quantitative methods as opposed to qualitative and even fewer studies have sought to understand the human factors in these new mobility solutions. This gap in knowledge is a valuable opportunity for design. Inherently qualitative and human focused, design research can fill this gap in knowledge by applying distinctly user-centred methods such as persona design, narrative storytelling, and in-depth observations to discover deeper human insights.

Design-driven digital futures: The role of design-led innovation in the creation of online connected communities for new mobility solutions

Online communities have fundamentally changed how humans connected and are now so common they are fundamental to the human experience. As the Internet developed for Web 1.0 to Web 2.0, the functionality of these communities has far exceeded initial expectations. These communities have shifted from simply places to share information to ways to access products and services that bridge the online and offline worlds. This shift has led to the disruption of many industries with the transportation industry being one such sector. Both private transport providers and public transport systems face competition from online communities who are able to link services providers and customers more effectively and innovatively. These types of communities fall under what has been popularised as collaborative consumption or the sharing economy. The aim of this study is to explore the role of Design-led Innovation in the creation of digital futures, specifically online connected communities for successful new mobility solutions. To explore this proposition multiple data collection methods are proposed;Content Analysis, ii) A Comparative Qualitative Study consisting of Qualitative Interviews and Focus Groups / Design Workshops and iii) An Action Research Cycle of Embedded Practice. The multidisciplinary nature of this study grounds this research in a novel position contributing to new knowledge in both the field of design, and also a deeper understanding of the larger fast-growing online community phenomena.

A randomized trial of fellowships for early career researchers finds a high reliability in funding decisions

Objectives Funding for early career researchers in Australia's largest medical research funding scheme is determined by a competitive peer-review process using a panel of four reviewers. The purpose of this experiment was to appraise the reliability of funding by duplicating applications that were considered by separate grant review panels. Study Design and Methods Sixty duplicate applications were considered by two independent grant review panels that were awarding funding for Australia's National Health and Medical Research Council. Panel members were blinded to which applications were included in the experiment and to whether it was the original or duplicate application. Scores were compared across panels using Bland–Altman plots to determine measures of agreement, including whether agreement would have impacted on actual funding. Results Twenty-three percent of the applicants were funded by both panels and 60 percent were not funded by both, giving an overall agreement of 83 percent [95% confidence interval (CI): 73%, 92%]. The chance-adjusted agreement was 0.75 (95% CI: 0.58, 0.92). Conclusion There was a comparatively high level of agreement when compared with other types of funding schemes. Further experimental research could be used to determine if this higher agreement is due to nature of the application, the composition of the assessment panel, or the characteristics of the applicants.

Effects of fish density distribution and effort distribution on catchability

The effects of fish density distribution and effort distribution on the overall catchability coefficient are examined. Emphasis is also on how aggregation and effort distribution interact to affect overall catch rate [catch per unit effort (cpue)]. In particular, it is proposed to evaluate three indices, the catchability index, the knowledge parameter, and the aggregation index, to describe the effectiveness of targeting and the effects on overall catchability in the stock area. Analytical expressions are provided so that these indices can easily be calculated. The average of the cpue calculated from small units where fishing is random is a better index for measuring the stock abundance. The overall cpue, the ratio of lumped catch and effort, together with the average cpue, can be used to assess the effectiveness of targeting. The proposed methods are applied to the commercial catch and effort data from the Australian northern prawn fishery. The indices are obtained assuming a power law for the effort distribution as an approximation of targeting during the fishing operation. Targeting increased catchability in some areas by 10%, which may have important implications on management advice.

From council dog catcher to critical scholar

Carol and I just missed each other in the early 1990s: Carol left Manchester for Australia in 1990, while I an·iv·ed in Manchester from Australia in 1993. Sixteen years later and on the very opposite side of the world, we found ourselves sharing an adjacent room during the 2009 Agri-Food Research Network conference in Auckland. Carol was already an accomplished sociologist; I was a newbie PhD student, presenting on a thesis topic that was only just starting to take shape...

How to develop an online community for pre-service and early career teachers

This paper contributes a number of design principles for developing large-scale online communities of pre-service and early career teachers (PS&ECTs). It presents the paradigms of connected learning, networked learning and communities of practice and contrasts them. It describes the potential for online communities to meet the needs of PS&ECTs and it identifies gaps that exist within certain types of existing online communities that currently support PS&ECTs. The paper proposes design principles for a new type of online community for PS&ECTs. These principles are drawn from the literature and from the preliminary outcomes of a pilot study.

An analysis of TLS handshake proxying

Content delivery networks (CDNs) are an essential component of modern website infrastructures: edge servers located closer to users cache content, increasing robustness and capacity while decreasing latency. However, this situation becomes complicated for HTTPS content that is to be delivered using the Transport Layer Security (TLS) protocol: the edge server must be able to carry out TLS handshakes for the cached domain. Most commercial CDNs require that the domain owner give their certificate's private key to the CDN's edge server or abandon caching of HTTPS content entirely. We examine the security and performance of a recently commercialized delegation technique in which the domain owner retains possession of their private key and splits the TLS state machine geographically with the edge server using a private key proxy service. This allows the domain owner to limit the amount of trust given to the edge server while maintaining the benefits of CDN caching. On the performance front, we find that latency is slightly worse compared to the insecure approach, but still significantly better than the domain owner serving the content directly. On the security front, we enumerate the security goals for TLS handshake proxying and identify a subtle difference between the security of RSA key transport and signed-Diffie--Hellman in TLS handshake proxying; we also discuss timing side channel resistance of the key server and the effect of TLS session resumption.

Loyalty (Brand Loyalty)

Loyalty is a desired marketing outcome for products ranging from fast-moving consumer goods, services, durables, and ideas products such as political parties and social behaviors. Evidence has shown that a base of loyal customers is advantageous for an organization as it reduces the marketing cost of doing business and improves profitability. The approaches to loyalty have varied over the decades with various schools of thoughts toward definitions, conceptualizations, and measurement. The need for understanding the nature of the product and consumer's behavior to determine the appropriate approach to loyalty is emphasized in this article. In this article, we outline the historical development of brand loyalty, the major approaches to the construct (attitudinal and behavioral) and new approaches that deconstruct attitudinal loyalty into its subcomponent parts.

Complete and interpretable conformance checking of business processes

This article presents a method for checking the conformance between an event log capturing the actual execution of a business process, and a model capturing its expected or normative execution. Given a business process model and an event log, the method returns a set of statements in natural language describing the behavior allowed by the process model but not observed in the log and vice versa. The method relies on a unified representation of process models and event logs based on a well-known model of concurrency, namely event structures. Specifically, the problem of conformance checking is approached by folding the input event log into an event structure, unfolding the process model into another event structure, and comparing the two event structures via an error-correcting synchronized product. Each behavioral difference detected in the synchronized product is then verbalized as a natural language statement. An empirical evaluation shows that the proposed method scales up to real-life datasets while producing more concise and higher-level difference descriptions than state-of-the-art conformance checking methods.

Alternaria Fruit Spot: New Directions

This project determined the identity of causal pathogens, epidemiology and disease cycle of Alternaria leaf blotch and fruit spot in Australian apples and provided a management strategy for both diseases for inclusion in the integrated fruit production manual.

Integrated pest management in cotton: exploiting behaviour-modifying (semiochemical) compounds for managing cotton pests

We review here research on semiochemicals for cotton pest management carried out in successive Cotton Co-operative Research Centres from 1998 to 2012. Australian cotton is now dominated by transgenic (Bt) varieties, which provide a strong platform for integrated pest management of key pests such as Helicoverpa spp., but new technologies are required to manage the development of resistance in Helicoverpa spp. to transgenic cotton and the problems posed by emerging and secondary pests, especially sucking insects. A long-range attractant for Helicoverpa moths, based on plant volatiles, has been commercialised as Magnet®. The product has substantial area-wide impacts on moth populations, and only limited effects on beneficial insects. Potential roles are being investigated for this product in resistance management of Helicoverpa spp. on transgenic cotton. Short-range, non-volatile compounds on organ surfaces of plants that do not support development of Helicoverpa spp. have been identified; these compounds deter feeding or oviposition, or are toxic to insect pests. One such product, Sero X®, is effective on Helicoverpa spp. and sucking pests such as whiteflies (Bemisia tabaci), green mirids (Creontiades dilutus), and other hemipteran insects, and is in the advanced stages of commercialisation.