Estudo comparativo in vitro do efeito da ciclagem térmica sobre a resistência à tração de copings metálicos cimentados sobre dentes naturais, utilizando se de dois agentes cimentantes

Pós-graduação em Odontologia Restauradora - ICT

Aperfeiçoamento e avaliação de um novo sistema de digestão assistida por aquecimento condutivo em frasco fechado para preparar amostras de carne “in natura” para análise elementar

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Development of Plurimetallic Electrocatalysts Prepared by Decomposition of Polymeric Precursors for EtOH/O-2 Fuel Cell

This work aimed to develop plurimetallic electrocatalysts composed of Pt, Ru, Ni, and Sn supported on C by decomposition of polymeric precursors (DPP), at a constant metal: carbon ratio of 40:60 wt.%, for application in direct ethanol fuel cell (DEFC). The obtained nanoparticles were physico-chemically characterized by X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX). XRD results revealed a face-centered cubic crystalline Pt with evidence that Ni, Ru, and Sn atoms were incorporated into the Pt structure. Electrochemical characterization of the nanoparticles was accomplished by cyclic voltammetry (CV) and chronoamperometry (CA) in slightly acidic medium (0.05 mol L-1 H2SO4), in the absence and presence of ethanol. Addition of Sn to PtRuNi/C catalysts significantly shifted the ethanol and CO onset potentials toward lower values, thus increasing the catalytic activity, especially for the quaternary composition Pt64Sn15Ru13Ni8/C. Electrolysis of ethanol solutions at 0.4 V vs. RHE allowed determination of acetaldehyde and acetic acid as the main reaction products. The presence of Ru in alloys promoted formation of acetic acid as the main product of ethanol oxidation. The Pt64Sn15Ru13Ni8/C catalyst displayed the best performance for DEFC.

Entwicklung massenspektrometrischer Isotopenverdünnungstechniken für die zuverlässige Bestimmung von Elementspuren und Schwefelspezies in Erdölprodukten

Einer der Hauptschwerpunkte der Arbeit lag in der Entwicklung einer spezies-spezifischen und einer spezies-unspezifischen GC-ICP-Q-MSIVA von Schwefelspezies in Petroprodukten. Es wurden hierzu Indikatoren, ausgehend von elementarem 34S-angereichertem Schwefel, im Mikromaßstab synthetisiert. Für die spezies-spezifische GC-ICP-Q-MSIVA wurde die erstmalige Synthese von 34S-markiertem Thiophen, Dibenzothiophen und 4-Methyldibenzothiophen verwirklicht. Als Indikatorsynthese für die spezies-unspezifische GC-ICP-Q-MSIVA erfolgte die erstmalige Darstellung von 34S-angereichertem Dimethyldisulid. Mit Hilfe der synthetisierten Verbindungen wurden spezies-spezifische und spezies-unspezifische massenspektrometrische Isotopenverdünnungsanalysen von Schwefelspezies in Petroprodukten durchgeführt. Vor allen GC-ICP-Q-MSIVA-Analysen erfolgte eine umfangreiche Speziesidentifizierung durch Aufstockexperimente mit kommerziell erhältlichen Standards und mit einem mit der GC gekoppelten Elektronenstoß (EI)-MS. Beide ICP-Q-MS Methoden zeichnen sich durch sehr niedrige Nachweisgrenzen (7 ng S/g) aus, welche auch eine Anwendbarkeit auf tiefentschwefelte Kraftstoffe garantieren. Mit der spezies-unspezifischen GC-ICP-Q-MSIVA ist neben einer Speziesanalyse auch eine Gesamtschwefelanalyse durch Aufsummierung aller in der Probe vorhandenen Spezies möglich. Es wurde im Rahmen dieser Arbeit auch der Einfluss möglicher Empfindlichkeitsänderungen des ICP-Q-MS durch koeluierende Kohlenwasserstoffe überprüft, wobei diese erwartungsgemäß auf das Ergebnis der spezies-spezifischen und spezies-unspezifischen GC-ICP-Q-MSIVA keinerlei Einfluss haben. Der zweite Hauptschwerpunkt der Arbeit lag auf der Ausarbeitung routinefähiger, schneller und zuverlässiger Methoden zur Gesamtelementspurenanalytik von Schwefel und Schwermetallen in Erdölen und Petroprodukten. Für die Gesamtschwefelanalyse wurde eine MSIVA nach thermaler Verdampfung mit 34S-markierten Dibenzothiophen als Indikator entwickelt. Die neu entwickelte Methode erlaubt eine sehr schnelle Bestimmung des Gesamtschwefelgehalts, wobei die eigentliche Messung des Isotopenverhältnisses innerhalb von Sekunden nach der Injektion der Probe erfolgt. Weiterhin zeichnet sich die Methode durch Robustheit und eine niedrige Nachweisgrenze (40 ng S/g) aus. Für die Analyse von Schwermetallen wurden erstmals Möglichkeiten einer direkten MSIVA von Erdölproben ohne zeitraubenden, kontaminationsträchtigen Aufschluss bzw. die schwierige Erzeugung einer Mikroemulsion zwischen hydrophober Probe und wässrigem Indikator entwickelt. Um eine homogene Verteilung des Indikators in der hydrophoben Probe zu ermöglichen, musste ausgehend von den zur Verfügung stehenden wässrigen Indikatorlösungen, eine Überführung des Indikators in ein organisches Lösungsmittel erfolgen. Hierzu wurde der jeweilige Metallindikator unter Komplexierung aus wässrigen Metallindikatorlösungen extrahiert. Für die Analyse der mit diesen Indikatorlösungen in organischer Phase versetzten Proben wurden zwei alternative Methoden ausgearbeitet. Bei der mit der Laserablation (LA) kombinierten ICP-SF-MSIVA wird die isotopenverdünnte Probe aus einer eigens für diesen Zweck entwickelten Probenhalterung ablatiert und so dem ICP-SF-MS zugeführt wird. Bei zeitlich sich verändernden Intensitäten der gemessenen Isotope werden aber reproduzierbare und konstante Isotopenverhältnisse erhalten. Im Falle einer homogenen Verteilung der Metallspuren wurde eine hervorragende Übereinstimmung mit Vergleichsmethoden und einem Referenzmaterial festgestellt. Im Falle einer heterogenen partikulären Verteilung der Metallspuren, wie sie z.B. bei Eisenspuren in den Erdölen vorlag, ist die Anwendbarkeit der LA-ICP-SF-MSIVA aufgrund des kleinen Probenvolumens (20 µL) jedoch begrenzt. Als Alternative zur LA-ICP-SF-MSIVA wurde ein System unter Verwendung der Fließinjektion für die Zuführung der isotopenverdünnten Probe zum ICP-SF-MS ausgearbeitet. Die isotopenverdünnte Probe wird hierbei in einen Eluentenstrom von Toluol injiziert und mit Hilfe einer Total-Consumption-Zerstäuber/Sprühkammer-Einheit vollständig bei einer Flussrate von 10 µL/min in das Plasma eingebracht. Neben einer nochmaligen Verkürzung der Analysenzeit und Vereinfachung der Probenvorbereitung bietet diese Methode zusätzlich stark verbesserte Nachweisgrenzen (z.B. Ni 0,9 ng/g). Leider sind mit diesem Verfahren bis jetzt nur Ni und Mo zuverlässig bestimmbar. Das in dieser Arbeit ausgearbeitete Methodenpaket erlaubt erstmals eine breite Einführung der ICP-MSIVA als zuverlässige Methode in die Routineanalytik der Petroindustrie. Durch die bewiesene Zuverlässigkeit, den geringen Zeitaufwand und die Robustheit der Methoden steht ihrem routinemäßigen Einsatz, außer einer weitergehenderen Automatisierung einzelner Verfahrensteile, prinzipiell nichts entgegen.

Characterization and optimization of an x-ray laser for the spectroscopy of Li-like heavy-ions

Recent developments in the theory of plasma-based collisionally excited x-ray lasers (XRL) have shown an optimization potential based on the dependence of the absorption region of the pumping laser on its angle of incidence on the plasma. For the experimental proof of this idea, a number of diagnostic schemes were developed, tested, qualified and applied. A high-resolution imaging system, yielding the keV emission profile perpendicular to the target surface, provided positions of the hottest plasma regions, interesting for the benchmarking of plasma simulation codes. The implementation of a highly efficient spectrometer for the plasma emission made it possible to gain information about the abundance of the ionization states necessary for the laser action in the plasma. The intensity distribution and deflection angle of the pump laser beam could be imaged for single XRL shots, giving access to its refraction process within the plasma. During a European collaboration campaign at the Lund Laser Center, Sweden, the optimization of the pumping laser incidence angle resulted in a reduction of the required pumping energy for a Ni-like Mo XRL, which enabled the operation at a repetition rate of 10 Hz. Using the experiences gained there, the XRL performance at the PHELIX facility, GSI Darmstadt with respect to achievable repetition rate and at wavelengths below 20 nm was significantly improved, and also important information for the development towards multi-100 eV plasma XRLs was acquired. Due to the setup improvements achieved during the work for this thesis, the PHELIX XRL system now has reached a degree of reproducibility and versatility which is sufficient for demanding applications like the XRL spectroscopy of heavy ions. In addition, a European research campaign, aiming towards plasma XRLs approaching the water-window (wavelengths below 5 nm) was initiated.

(Table 2) Geochemical composition of suspended matter samples from the northern Dvina River

The results of the analysis of samples of the Northern Dvina River's suspended particulate matter obtained by the sedimentation method from large water volumes in the periods of the spring high water and summer low water are presented. By the method of sequential leaching using different reagents, four fractions have been separated: the F1 is the sorbed complex and carbonates, the F2 is the amorphous hydroxides of Fe and Mn, the F3 is the form connected with the organic matter, and the F4 is the residual or silicate-detrital (inert) form. The data have shown that all ten elements determined were grouped with respect to the ratio of the distinguished forms: F4 is the predominant form for Al and Fe (73-88% of all the forms; however, the summer sample contains only 38% of this form of iron, and F2 is the predominant form for this period with 46.6%). As to Mn, the F1, F2, and F4 are nearly equally distributed in the spring high water samples, and only the F3 form is less important (5.4%). In the summer sample, the manganese sorbed complex is predominant (53.5%); for Cu, Ni, Cr, and Co, the inert F4 form is predominant (60-70%) in the sample of the spring suspended matter. The summer low water suspended matter has a lower F4 contribution (25-45%); for Zn, Pb, and Cd, the equal distribution of the forms in the spring samples is typical, while the summer suspended matter differs by the F2 form's predominance (53-61% for Zn and Pb). The main conclusion from the acquired data is that the geochemical mobility of all the studied elements, except for cadmium, in the summer low water suspended matter is higher than in the spring suspended matter. The more intensive biogeochemical processes in August, the high level of organic matter, and the higher contribution of phytoplankton lead to the intensification of the metals' geochemical activity in the Northern Dvina suspended matter in the end of the summer compared to the spring high water period when the physical processes are predominant over the biogeochemical ones due to the high speeds of the freshened waters flow.

(Table 3) Chemical analyses from DSDP Holes 22-214, 22-215 and 22-216 in the Indian Ocean

The basalts and oceanic andesites from the aseismic Ninetyeast Ridge display trachytic, vesicular and amygdaloidal textures suggesting a subaerial volcanic environment. The normative composition of the Ninetyeast Ridge ranges from olivine picriteto nepheline-normative alkaline basalt, suggesting a wide range of differentiation. This is further supported by the fractionation-differentiation trends displayed by transition metal trace elements (Ni, Cr, V and Cu). The Ninetyeast Ridge rocks are enriched in rare earth (RE) and large ion lithophile (LIL) elements and Sr isotopes (0.7043-0.7049), similar to alkali basalts and tholeiites from seamounts and islands, but different from LIL-element-depleted tholeiitic volcanic rocks of the recent seismic mid-Indian oceanic ridge. The constancy of 87Sr/86Sr ratios for basalts and andesites is compatible with a model involving fractional crystallization of mafic magma. The variation of 87Sr/86Sr ratios between 0.97 and 2.79 may possibly be explained in terms of a primordial hot mantle and/or chemically contrasting heterogeneous mantle source layers relatively undepleted in LIL elements at different periods in the geologic past. In general, the Sr isotopic data for rocks from different tectonic environments are consistent with a "zoning-depletion model" with systematically arranged alternate alkali-poor and alkali-rich layers in the mantle beneath the Indian Ocean.

Sediments and tephra layers from the southern Tyrrhenian abyssal plain near Marsili Seamount

From the south-eastern Tyrrhenian deep-sea floor, four sediment cores of "Meteor" cruise 22 (1971) are described. These cores were taken in the basin between the Aeolian Islands and the Marsili Seamount, an elevation of more tha 3000 m above the sea floor. The sedimentation of the deep-sea basin is distinguished by a sequence of turbidites with a high sedimentation rate. The composition of the clastic material and the position of the cores in the mouth area of the morphologically very pronounced Stromboli Canyon suggest an interpretation of the turbidite sequence as fan of this canyon onto the deep-sea floor. A white rhyolitic pumice-tephra at the base of the 4 m thick sequence of turbidites in core M22-102 has been correlated with the Pelato eruption of the island of Liparo in the 6th century A.D. At the foot of the Marsili Seamount - apparently in morphologically elevated positions - the influence of the turbidite sedimentation increases, the rate of sedimentation is lower and stratigraphic omissions are probable. Here, rather compacted globigerina marls have been found in only 15 -25 cm depth. In addition, volcanic material in the form of lapilli layers, palagonitized ashes and detrital volcanic sands of the Marsili Seamount have been encountered in this area. An up to 3 cm thick layer of completely palagonitized basaltic ash intercalates with the marls at the base of two cores. Layers of very fresh olivine basaltic lapilli in core 103 and palagonitized lapilli of latitic composition in core 104 testify to an explosive submarine volcanism of the Marsili Seamount. According to the stratigraphy of core 103, the latest manifestations of this basaltic volcanism belong to the late Pleistocene (Emiliana huxleyi-zone of Nannoplankton stratigraphy) The basaltic lapilli are glassy to perhyaline with phenocrysts or microphenocrysts predominantely of olivine. The petrological character of the basaltic volcanites with high MgO, Ni, Cr and high MgO/FeO- and Ni/Co-ratios exhibits primitive basaltic features. These basalts clearly differ from basalts of the ocean floors, mid-ocean ridges and marginal basins. Prominent features are a missing iron-enrichment trend and low TiO2. Al2O3 tends to be high, as well as K2O and related trace elements (Ba, Sr). In spite of silica undrsaturation and high color index, the Marsili basalt exhibit some analogies with the calcalkaline basalts of the Aeolian arc, as well as the undersaturated basalts of some other circumoceanic areas.

(Appendix B) Carbonate fraction geochemistry at DSDP Hole 72-516F

This paper presents data on trace elements (Sr, Mg, Na, K, Mn, Fe, Ni, Cr) and isotopes (13C, 18O) on the carbonate fraction of bulk sediments from the Coniacian to Paleocene samples of Hole 516F. Relationships of trace elements to mineralogy and stratigraphic position are discussed at length, with special emphasis on 1) the differences between Hole 516F and other oceanic sites, and 2) the transitions observed at the Cretaceous/Tertiary boundary. Isotope data are compared to those obtained in other localities of the same age. The sections show the same major 13C variations at the Cretaceous/Tertiary boundary, indicating that this event is a planetary phenomenon.

Metals in suspended matter and bottom sediments from of North Dvina estuary

In 1995-1997 three oceanographic cruises to the White Sea were undertaken in the framework of the INTAS project 94-391, and a multi-disciplinary geochemical study of the major North Dvina estuary has been carried out. Distribution of temperature, salinity and concentration of suspended matter in water columm, as well as contents of Al, Fe, Mn, Co, Cu, Ni, Cr, Pb, Zn, and organic carbon contents in suspended matter and sediments of the North Dvina estuary were determined. Most of the metals and organic matter studied appear to be of terrestrial origin, since the main source of investigated elements in the estuary is river run-off. It was found that metals incorporated in minerals are absolutely prevailing forms in estuarine sediments, they comprise up to 60-99% of total metal contents. Two zones of metal accumulation in the sediments were found in the North Dvina estuary. These zones are considered as local geochemical barriers within a major river-sea barrier. Distribution of most elements studied in the sediments of the North Dvina estuary is controlled by grain size variability in the sediments. Analysis of data on heavy metal contents in the sediments and bivalves of the North Dvina estuary did not reveal any anthropogenic heavy metal pollution in the region.

Speciation of metals in bottom sediments from the south Kara Sea and Ob and Yenisei estuarine zones

Speciation of Fe, Mn, Zn, Cu, Co, Ni, Cr, Pb, and Cd was studied in 52 samples of bottom sediments collected during Cruise 49 of the R/V "Dmitry Mendeleev" to the estuaries of the Ob and Yenisei rivers and to the southwest Kara Sea. Immediately after sampling the samples were subjected to on-board consecutive extraction to separate metal species according to their modes of occurrence in the sediments: (1) adsorbed, (2) amorphous Fe-Mn hydroxides and related metals, (3) organic + sulfide, and (4) residual, or lithogenic. Atomic absorption spectroscopy of the extracts was carried out at a stationary laboratory. Distribution of Fe, Zn, Cu, Co, Ni, Cr, Pb, and Cd species is characterized by predominance of lithogenic or geochemically inert modes (70-95% of bulk contents), in which the metals are bound in terrigenous and clastic mineral particles and organic detritus. About half of total Mn amount and 15-30% of Zn and Cu are contained in geochemically mobile modes. Spatiotemporal variations in proportions of the metal species in the surface layer of sediments along sub-meridional sections and through vertical sections of bottom sediment cores testify that Mn and, to a lesser extent, Cu are the most sensitive to changes in sedimentation environment. The role of their geochemically mobile species notably increases under reducing conditions.

Mineralogy micromorphology, and geochemistry at DSDP Site 89-585

At Site 585 of Deep Sea Drilling Project Leg 89 more than 500 m of volcaniclastic to argillaceous middle-Late Cretaceous sediments were recovered. Analyses by X-ray diffraction (bulk sediment and clay fraction), transmission electron microscopy, molecular and atomic absorption, and electron microprobe were done on Site 585 samples. We identify four successive stages and interpret them as the expression of environments evolving under successive influences: Stage 1, late Aptian to early Albian - subaerial and proximal volcanism, chiefly expressed by the presence of augite, analcite, olivine, celadonite, small and well-shaped transparent trioctahedral saponite, Al hydroxides, Na, Fe, Mg, and various trace elements (Mn, Ni, Cr, Co, Pb, V, Zn, Ti). Stage 2, early to middle Albian - submarine and less proximal volcanic influence, characterized by dioctahedral and hairy Mg-beidellites, a paucity of analcite and pyroxenes, the presence of Mg and K, and local alteration of Mg-smectites to Mg-chlorites. Stage 3, middle Albian to middle Campanian - early marine diagenesis, marked by the development of recrystallization from fleecy smectites to lathed ones (all of alkaline Si-rich Fe-beidellite types), by the development of opal CT and clinoptilolite, and by proximal to distal volcanic influences (Na parallel to Ti, K). Local events consist of the supply of reworked palygorskite during the Albian-Cenomanian, and the recurrence of proximal volcanic activity during the early Campanian. Stage 4, late Campanian to Maestrichtian - development of terrigenous supply resulting from the submersion of topographic barriers; this terrigenous supply is associated with minor diagenetic effects and is marked by a clay diversification (beidellite, illite, kaolinite, palygorskite), the rareness of clay recrystallizations, and the disappearance of volcanic markers.

Geochemistry of basalts at DSDP Hole 83-504B

The major element geochemistry of basalts recovered from Leg 83, Hole 504B, shows the typical features of midocean ridge basalts (MORB). The range of variation in their composition, together with the behavior of compatible trace elements (Co, Ni, Cr), indicate the well-known relative abundance of minerals that crystallize from these basaltic liquids: plagioclase, olivine, pyroxene, and spinel in decreasing abundance. The hygromagmaphile (or LILE or incompatible) elements are extremely depleted in light rare earths. Nevertheless, some units show flat and enriched REE patterns. These patterns, together with the values of the La/Ta ratio, are interpreted in terms of local mantle heterogeneity.

Trace metals in shells of mussels and clams from deep-sea hydrothermal vent fields of the Mid-Atlantic Ridge and East Pacific Rise

Bioaccumulation of trace metals in carbonate shells of mussels and clams was investigated at seven hydrothermal vent fields of the Mid-Atlantic Ridge (Menez Gwen, Snake Pit, Rainbow, and Broken Spur) and the Eastern Pacific (9°N and 21°N at the East Pacific Rise and the southern trough of Guaymas Basin, Gulf of California). Mineralogical analysis showed that carbonate skeletons of mytilid mussel Bathymodiolus sp. and vesicomyid clam Calyptogena m. are composed mainly of calcite and aragonite, respectively. The first data were obtained for contents of a variety of chemical elements in bivalve carbonate shells from various hydrothermal vent sites. Analyses of chemical compositions (including Fe, Mn, Zn, Cu, Cd, Pb, Ag, Ni, Cr, Co, As, Se, Sb, and Hg) of 35 shell samples and 14 water samples from mollusk biotopes revealed influences of environmental conditions and some biological parameters on bioaccumulation of metals. Bivalve shells from hydrothermal fields with black smokers are enriched in Fe and Mn by factor of 20-30 relative to the same species from the Menez Gwen low-temperature vent site. It was shown that essential elements (Fe, Mn, Ni, and Cu) more actively accumulated during early ontogeny of the shells. High enrichment factors of most metals (n x 100 - n x 10000) indicate efficient accumulation function of bivalve carbonate shells. Passive metal accumulation owing to adsorption on shell surfaces was estimated to be no higher than 50% of total amount and varied from 14% for Fe to 46% for Mn.

(Table 2) Contents of trace elements in plankton from the White Sea

With a view to more complete understanding of the role of phyto- and zooplankton in biogeochemical cycles, spatial distributions of Fe, Mn, Co, Ni, Cr, Cu, Cd, Pb, Zn, As, Hg, and Corg in the White Sea seston (21 samples) collected in August 2004 during Cruise 64 of R/V ''Professor Shtokman'' were studied. It was shown that the elements in study are accumulated in plankton with enrichment factors from 10**2 for Hg to 10**5 for Fe, as compared to seawater. Spatial distribution of trace elements is determined by sources of their supply and correlates with distribution of primary production and biomass of zooplankton. Increased values of trace element contents (excluding As) are characteristic of the Dvina Bay, whereas the highest As concentrations were found in the Kandalaksha Bay.