Structural adhesives modified with thermally expandable particles

In this study, the behaviour of two structural adhesives modified with thermally expandable particles (TEPs) was investigated as a preliminary study for further investigations on the potential of TEPs in adhesive joints. Tensile bulk tests were performed to get the tensile properties of the adhesives and TEPs-modified adhesives. In order to determine the expansion temperature of the particles while encapsulated in these particular adhesive systems, the variation of the volume of adhesive samples modified with different TEPs concentration as a function of temperature was measured. Further, the possibility of any chemical interactions between TEPs and adhesives matrix in the TEPs-modified specimens was verified by a Fourier transform infrared spectroscopy analysis. Finally, the fracture surfaces of the unmodified and TEPs-modified specimens, as well as the dispersion and the morphology of the particles, were examined by a scanning electron microscopy analysis. It was found that the stiffness of the TEPs-modified adhesives is not affected by incorporation of TEPs in the adhesives matrix, while the tensile yield strength decreased by increasing the wt% TEPs content. In applications of such particular materials (TEPs-modified adhesives), the temperature should be controlled to stay between 90°C and 120°C in order to obtain the highest expansion ratio. At a lower temperature, not all the particles will expand, and above, the TEPs will deteriorate and as a result the TEPs-modified adhesives will deteriorate.

A Study on Microstructure Characteristics of TEPs-modified Adhesives

Thermally expandable particles (TEPs) were developed by Dow Chemical Co in the early 1970´s [1] and were further developed by others [2, 3]. They are particles made up of a thermoplastic shell filled with liquid hydrocarbon. On heating them, two transformations will occur. One is the softening of shell material and the other is the gasification of the hydrocarbon liquid inside it. As a consequence, the shell will expand as the gas inside it will push the softened shell from inside out causing it to grow in size [4]. When fully expanded, the growth in volume of the particle can be from 50 to 100 times [3]. Owing to this unique behaviour, TEPs are used by the industry in a wide variety of applications mainly for weight reduction and appearance improvement for thermoplastics, inks, and coatings. In adhesive bonding, TEPs have been used for recycling purposes. Moreover, TEPs might be used to modify structural adhesives for other new purposes, such as: to increase the joint strength by creating an adhesive functionally modified along the overlap of the joint by gradual heating and/or to heal the adhesive in case of damage.

Mechanical properties of chemically modified portuguese pinewood

To turn wood into a construction material with enhanced properties, many methods of chemical modification have been developed in the last few decades. In this work, mechanical properties of pine wood were chemically modified, compared and evaluated. Maritime pine wood (Pinus pinaster) was modified with four chemical processes: 1,3-dimethylol-4,5- dihydroxyethyleneurea, N-methylol melamine formaldehyde, tetra-alkoxysilane and wax. The following mechanical properties were assessed experimentally: Modulus of elasticity measured statically, stiffness stabilization efficiency in different climates (30 and 87% of relative humidity), modulus of rupture, work maximum load, impact bending strength, compression, tensile and shear strength at indoor conditions (65% of relative humidity). In both types of active principle of modification, cell wall or lumen fill, no significant changes on the bending stiffness (modulus of elasticity) were found. In the remaining properties analysed significant changes in the modified wood-material took place compared to unmodified wood control: - Cell wall modification was the most effective method to achieve high stiffness stabilization efficiency (up to 60%) and also increased compression strength (up to 230%). However, modulus of rupture, tensile, shear and the impact bending strength were reduced by both resins, but in a varying extent, where the N-methylol melamine formaldehyde endured less reduction than 1,3-dimethylol-4,5-dihydroxyethyleneurea resin. In the latter, reduction up to 60% can take place. - In the lumen fill modification: tetra-alkoxysilane has no effect in the mechanical properties. Although, a slight increase in shear strength parallel to the grain was found. Wax specimens have shown a slight increase in bending strength, compression, tensile and shear strength as well as in the absorption energy capacity.

The macroeconomic effects of (different) oil shocks: A VAR approach

A Work Project, presented as part of the requirements for the Award of a Masters Degree in Economics from the NOVA – School of Business and Economics

Studies towards modified chitooligosaccharides: a new approach to NAG-NAM moiety

Dissertação para obtenção do Grau de Mestre em Bioorgânica

Evaluation of drought tolerance in several genotypes of spelt (Triticum aestivum Var. Spelta)

Domestication of plants and plant breeding have dramatically eroded the allelic variations of crop species which led to an increasing susceptibility of crop plants to environmental stresses, diseases and pests. Drought is a major environmental stress factor that affects the growth and development of plants so the selection of tolerant genotypes becomes increasingly important with respect to the predicted effects of global warming. In this study, several genotypes of Spelt (Triticum aestivum var. spelta) were tested under low water supply in soil with the aim of to find Spelt genotypes more resistant than wheat to these conditions, and select them so that in future may be used to improve wheat crops. Morphological analyses were performed and mineral and enzymatic analyses and also dry matter production were calculated. Our results suggests that the genotypes Sp53, Sp96, Sp912, Sp757 and Sp804 are a potential ones to use in breeding programs to improve wheat production. Under drought, these genotypes had growth efficiency of 38%, 45%, 64%, 37%, and 31% respectively and also showed higher biomass than modern wheat and were also mineralogical richer. The genotypes Sp96 and Sp912 showed highest activity of all antioxidants enzymes tested. This work proves that Spelt is a good wheat to continue to study in order to improve wheat crops in dry areas and consequently increase the quality of life and health of the populations living in those areas.

Acetylcholinesterase inhibition starting from extracts of Bauhinia variegata L., Bauhinia var. candida (Aiton) Buch.-Ham., and Bauhinia ungulata L

INTRODUCTION: A treatment to the Alzheimer's disease consists inhibition of the acetylcholinesterase, which is responsible for the acetylcholine control in the synapses. METHODS: We have investigated the potential of inhibition of the acetylcholinesterase produced by hexane extracts of leaves, branches, and flowers from three Bauhinia specimens, which is based on the technique of thin layer chromatography and on identifying the organ of the plant that possesses larger concentration of inhibitors. RESULTS: Retention factor analysis shows values of 0.31aA, 0.31aA, and 0.46aB for flowers B. variegata, B. var. candida, and B. ungulata, respectively. CONCLUSIONS: The flower extract of B. ungulata is the most suitable for further studies on this inhibition.

Fiscal policy under financial stress: A threshold VAR approach

The purpose of the project is to measure the impact of fiscal policy on the Portuguese GDP and how it may vary according to the state of the financial market. A Threshold VAR model is presented in which the two regimes are found using a financial stress index that divides the economy into a situation of financial stress and financial stability.

Alguns aspectos da biologia reprodutiva do guaranazeiro (Paullinia cupana var. sorbilis (Mart.) Ducke - Sapindaceae

O objetivo deste trabalho é a identificação dos insetos visitantes do guaraná (Paullinia cupanavar. sorbilis)e a determinação dos prováveis polinizadores, em uma plantação próxima de Manaus, assim como determinar a taxa de visita em ambas as flores, masculinas e femininas. Também estuda a variação na freqüência da produção de flores masculinas e femininas, no período da floração. Foram coletadas trinta e duas famílias de insetos de cinco ordens. Hymenoptera foi a ordem mais freqüente com 71% de todos os indivíduos. Vinte e sete espécies de abelhas foram encontradas visitando as flores. A síndrome geral da polinização da espécies parece estar adaptada aos Hymenoptera. E sugerido que Melipona seminigra merilae, Xylocopa muscariae Apis melliferaestão entre os mais Importantes polinlzadores, sendo que outros Hymenoptera, Diptera, Lepidoptera e Coleoptera são, talvez, ocasionais . Parece não haver preferência dos diversos grupos de insetos por flores masculinas ou femininas. A floração ocorreu durante 37 a 38 dias com dois períodos bem definidos. Houve uma pausa de um a dois dias [sem floração) entre os dois períodos, coincidindo em todas as inflarescências estudadas. 0 primeiro período durou 20-22 dias, enquanto o segundo foi menor, durando somente 16-18 dias. Em nenhum caso, o pique da floração masculina coincidiu com a feminina.

Biologia floral de Solanum sessiliflorum Dun. Var. sessiliflorum, na região de Manaus, AM

Foi estudada a biologia floral de Solanum sessiliflorum var. sessiflorum em Manaus, Amazonas. Esta espécie é polinizada por abelhas que vibram durante a visita à flor sendo a abelha Eulaema nigrita considerada como a polinizadora mais eficiente, pelo seu comportamento, tamanho e freqüência. O sistema de reprodução desta espécie parece ser alogãmico, o modo de, apresentação das flores numa mesma planta e asòlncronlco e o único recurso oferecido é o polen. As abelhas visitantes de, Solanum sessiliflorum var. sessiliflorum são de um modo geral florestais, sendo necessária uma região de mata relativamente próxima para a manutenção da poinizção e perpetuação dessas espécies.

Alguns insetos do cubiu (Solanum sessiliflorum Dunal VAR. sessiliflorum Dunal, Solanaceae) na região de Manaus - AM

São citadas quatorze espécies de insetos nocivos ou potencialmente nocivos ao cubiu (Solanum sessiliflorum Dunal var. sessiliflorum Dunal) na região de Manaus. Os elementos da sua biologia e a importância de seus danos são fornecidos.

Patologia em larvas de Ascia monuste monuste infectadas por Bacillus thuringiensis var. Kurstaki. I. Sintomatologia externa e interna

RESUMONo presente trabalho foram estudados os sintomas externos e internos pré-mortais em lagartas de Ascia monuste monuste infectadas com um produto (Dipel) à base de Bacillus thuringiensis var. kurstaki (Sorotipo H3a:3b). Tais sintomas são importantes nas avaliações das doenças de insetos no campo.Para os estudos da histopatologia foram analisadas as alterações ocorridas no tecido e c´leilas do epitélio intestinal a nível de microscópia ótica e eltrônica. Tais alterações resultam na morte das lagartas infectadas.

Patologia em larvas de Ascia monuste monuste infectadas por Bacillus thuringiensis var. Kurstaki. II. susceptibilidade e virulência

RESUMOFoi investigado, no presente trabalho, a patogenicidade de Bacillus thuringiensis var. kurstaki (sorotipo H3a: 3b) dos produtos comerciais Dipel e Bactospeine para lagartas de Ascia monuste monuste. Por meio de bioensaios, avaliou-se a alta susceptibilidade das lagartas dessa espécie ao bacilo, revelando a possibilidade do uso deste no controle de A. monuste monuste.

COMPORTAMENTO FENOLÓGICO DA SUCUPIRA-PRETA (Diplotropis purpurea (Rich.) Amsh. var. coriacea Amsh.), NA RESERVA FLORESTAL DUCKE

Este trabalho analisa dados de 6 anos (1980-1985) de observações da fenologia de cinco indivíduos arbóreos da espécie Diplotropis purpures (Rich.) Amsh. var. coriacea Amsh., da família Leguminosae, subfamília Papilionoideae, localizados na Reserva Florestal Ducke. Determinou-se a época, duração e freqüência das fases reprodutivas, bem como o tipo de mudança foliar. A espécie apresentou a fase de floração na estação seca. A fase de frutificação foi observada no meio da estação seca e início da estação chuvosa. A duração média da fase de floração foi de 6 meses e a fase de frutificação 7 meses. Ao nível de espécie, o padrão de ocorrência da fase de floração e frutificação foi anual à irregular. Porém, ao nível de indivíduo, o padrão de comportamento foi irregular. Quanto ao tipo de mudança foliar, a espécie apresentou características de ser semi-caducifólia durante a floração, na época seca.