Determination of aliphatic amines from soil and wastewater of a paper mill by pre-column derivatization using HPLC and tandem mass spectrometry (HPLC-MS/MS)

A pre-column derivatization method for the sensitive determination of aliphatic amines using the labeling reagent 1,2-benzo-3,4-dihydrocarbazole-9-ethyl chloroformate (BCEOC) followed by HPLC with fluorescence detection and APCI/NIS identification in positive-ion mode has been developed. The chromophore of 2-(9-carbazole)-ethyl chloroformate (CEOC) reagent was replaced by the 1,2-benzo-3,4-dihydrocarbazole functional group, which resulted in a sensitive fluorescence derivatizing reagent, BCEOC, that could easily and quickly label amines. Derivatives were stable enough to be efficiently analyzed by HPLC and showed an intense protonated molecular ion corresponding m/z [M + H](+) with APCI/MS in positive-ion mode. The collision induced dissociation of the protonated molecular ion formed characteristic fragment ions at m/z 264.1, m/z 246.0 and m/z 218.1, corresponding to the cleavages of CH2CH2O-CO, CH2CH2-OCO, and N-CH2CH2O bonds. Studies on derivatization conditions demonstrated that excellent derivatization yields close to 100% were observed with a 3 to 4-fold molar reagent excess in acetonitrile solvent, in the presence of borate buffer (pH 9.0) at 40 degrees C for 10 min. In addition, the detection responses for BCEOC derivatives were compared with those obtained with CEOC and FMOC as labeling reagents. The ratios I-BCEOC/I-CEOC and I-BCEOC/I-FMOC were, respectively, 1.40-2.76 and 1.36-2.92 for fluorescence responses (here, I was the relative fluorescence intensity). Separation of the amine derivatives had been optimized on an Eclipse XDB-C-8 column. Detection limits calculated from an 0.10 pmol injection, at a signal-to-noise ratio of 3, were 18.65-38.82 fmol (injection volume 10 mu L for fluorescence detection. The relative standard deviations for intraday determination (n = 6) of standard amine derivatives (50 pmol) were 0.0063-0.037% for retention times and 3.36-6.93% for peak areas. The mean intra-and inter-assay precision for all amines were <5.4% and 5.8%, respectively. The recoveries of amines ranged from 96 to 113%. Excellent linear responses were observed with correlation coefficients of >0.9994. The established method provided a simple and highly sensitive technique for the quantitative analysis of trace amounts of aliphatic amines from biological and natural environmental samples.

Musculoskeletal symptoms among female garment factory workers in Sri Lanka.

OBJECTIVES: To assess the prevalence of musculoskeletal symptoms and their association with sociodemographic risk factors among female garment factory workers in Sri Lanka. METHODS: 1058 randomly selected female garment factory workers employed in the free trade zone of Kogalla, Sri Lanka were recruited to complete two interviewer-administered questionnaires assessing musculoskeletal symptoms and health behaviors. DISCUSSION: Musculoskeletal complaints among female garment workers in the FTZ of Kogalla are less common than expected. Sociocultural factors may have resulted in underreporting and similarly contribute to the low rates of healthcare utilization by these women. RESULTS: 164 (15.5%) of workers reported musculoskeletal symptoms occurring more than 3 times or lasting a week or more during the previous 12-month period. Back (57.3%) and knee (31.7%) were the most common sites of pain. Although most symptomatic women reported that their problems interfered with work and leisure activities, very few missed work as a result of their pain. Prevalence correlated positively with increased age and industry tenure of less than 12 months. Job type, body mass index, and education were not significant predictors of musculoskeletal symptoms.

What's wrong with factory farming?

© The Author 2014.Factory farming continues to grow around the world as a low-cost way of producing animal products for human consumption. However, many of the practices associated with intensive animal farming have been criticized by public health professionals and animal welfare advocates. The aim of this essay is to raise three independent moral concerns with factory farming, and to explain why the practices associated with factory farming flourish despite the cruelty inflicted on animals and the public health risks imposed on people. I conclude that the costs of factory farming as it is currently practiced far outweigh the benefits, and offer a few suggestions for how to improve the situation for animals and people.

Incidencia del manejo agronómico convencional y orgánico sobre la biodiversidad en sistemas productivos de aguacate (Persea americana Mill.) en el estado de Michoacán, México

La pérdida de la biodiversidad que genera la disminución de interacciones bióticas y procesos ecosistémicos es uno de los principales problemas ecológicos en la actualidad. Esta situación se ha relacionado a la simplificación de los sistemas naturales y a la intensificación de los sistemas productivos agrícolas, prácticas que incluso pueden ir en detrimento del rendimiento de los campos de cultivo. Sin embargo, las huertas podrían ser reservorios de biodiversidad y recursos alimenticios que provean hábitats de alta calidad para muchos organismos. En este trabajo, se relaciona el tipo de manejo agronómico (convencional y orgánico) en huertas aguacateras con la riqueza y la composición de las comunidades de visitantes florales, acarreadores de polen y plantas herbáceas con el fin de estudiar la diversidad asociada a dichos sistemas y la incidencia del manejo agronómico sobre estas comunidades. El trabajo se compone de 3 capítulos. El primer capítulo plantea la relación entre el manejo agronómico y la diversidad de visitantes florales y plantas herbáceas a partir de la generación de Unidades Básicas de Clasificación (UBC). En el segundo capítulo, se aborda la ecología reproductiva del aguacatero, en donde se estimó la oferta floral, la diversidad de la comunidad de visitantes florales y acarreadores de polen, su eficiencia de estos en el acarreo de polen y su contribución a la producción de frutos bajo el manejo agronómico orgánico y convencional. En el tercer capítulo, se construyeron y analizaron seis redes de interacción de polen acarreado-acarreador en dos momentos del cultivo: i) durante la floración del aguacatero y ii) en ausencia de floración del aguacatero. El estudio se llevó a cabo durante dos años consecutivos en el pico de floración 2010/2011 y 2011/2012 en 6 huertas orgánicas y 4 convencionales (...) Los resultados de este trabajo mostraron como el manejo agronómico puede influir en la estructura de la comunidad de visitantes, acarreadores de polen y herbáceas. Considerando que el cultivo del aguacatero presenta la floración en una época específica del año, es importante que existan de forma continua otros recursos florales para los acarreadores como son las herbáceas. Los recursos provenientes de estas plantas pueden mantener durante el año la funcionalidad de la comunidad de visitantes y acarredores, proporcionando el servicio ecosistémico de la polinización de plantas silvestres y de las cultivadas. A su vez, la tesis contribuye al fortalecimiento del conocimiento de patrones que proponen que la disponibilidad de recursos florales en las huertas derivados de manejos agronómicos más integrales y menos intensivos que favorecen el incremento de la riqueza de visitantes de flores y acarreadores de polen nativos

The CO2 microalgae biorefinery: high value products and biofuels using halophilic microalgae in the “D-Factory”

Fuel-only algal systems are not economically feasible because yields are too low and costs too high for producing microalgal biomass compared to using agricultural residues e.g. straw. Biorefineries which integrate biomass conversion processes and equipment to produce fuels, power and chemicals from biomass, offer a solution. The CO2 microalgae biorefinery (D-Factory) is a 10 million Euro FP7-funded project which will cultivate the microalga Dunaliella in highly saline non-potable waters in photobioreactors and open raceways and apply biorefinery concepts and European innovations in biomass processing technologies to develop a basket of compounds from Dunaliella biomass, including the high value nutraceutical, β-carotene, and glycerol. Glycerol now finds markets both as a green chemical intermediate and as a biofuel in CHP applications as a result of novel combustion technology. Driving down costs by recovering the entire biomass of Dunaliella cells from saline cultivation water poses one of the many challenges for the D-Factory because Dunaliella cells are both motile, and do not possess an external cell wall, making them highly susceptible to cell rupture. Controlling expression of desired metabolic pathways to deliver the desired portfolio of compounds flexibly and sustainably to meet market demand is another. The first prototype D-Factory in Europe will be operational in 48 months, and will serve as a robust manifestation of the business case for global investment in algae biorefineries and in large-scale production of microalgae.

(From) The Mill for Grinding Old People Young

Chapter one of novel in progress

The application of colloidal gas aphrons in the recovery of fine cellulose fibres from paper mill wastewater

Colloidal gas aphrons (CGAs) are micron-sized gas bubbles of 25–30 µm in diameter produced by a high-speed stirrer in a vessel containing dilute surfactant solution. These bubbles, because of their small size, exhibit some colloidal properties. In this work, CGAs were used to separate fine fibres from a lean slurry of cellulosic pulp in a flotation column. The pulp fibres were recovered as foamate from the top. Sodium dodecyl sulphate at a concentration of 2.0 kg/m3 was used as a surfactant to generate the CGAs in a spinning disc apparatus. The results indicated that up to 70% flotation efficiency could be obtained within a short column height of 0.3–0.35 m. This technique can be applied to recover fine cellulosic pulp from paper-machine backwater.

Synthesis of nucleoside analogues in a ball mill: fast, chemoselective and high yielding acylation without undesirable solvents

The chemoselective acylation of primary aliphatic amines has been achieved in under ten minutes (and for aromatic amines under 120 min) using vibration ball-milling, avoiding undesirable solvents which are typically employed for such reactions (e.g. DMF). Under optimised conditions, the synthesis of amides in the presence of both primary and secondary alcohol functions was achieved in high to excellent yields (65-94%). Overall, the methods described have significant practical advantages over conventional approaches based upon bulk solvents including greater yields, higher chemoselectivity and easier product separation.

Rapid synthesis of nucleotide pyrophosphate linkages in a ball mill

Using a ball mill, rapid, atom-economic coupling between adenosine-5'-phosphoromorpholidate and phosphorylated ribose derivatives as their sodium or barium salts was achieved. Facile purification by reversed-phase HPLC enabled product isolation within hours.