Mathematical modelling and control of agitated extraction columns

Liquid-liquid extraction has long been known as a unit operation that plays an important role in industry. This process is well known for its complexity and sensitivity to operation conditions. This thesis presents an attempt to explore the dynamics and control of this process using a systematic approach and state of the art control system design techniques. The process was studied first experimentally under carefully selected. operation conditions, which resembles the ranges employed practically under stable and efficient conditions. Data were collected at steady state conditions using adequate sampling techniques for the dispersed and continuous phases as well as during the transients of the column with the aid of a computer-based online data logging system and online concentration analysis. A stagewise single stage backflow model was improved to mimic the dynamic operation of the column. The developed model accounts for the variation in hydrodynamics, mass transfer, and physical properties throughout the length of the column. End effects were treated by addition of stages at the column entrances. Two parameters were incorporated in the model namely; mass transfer weight factor to correct for the assumption of no mass transfer in the. settling zones at each stage and the backmixing coefficients to handle the axial dispersion phenomena encountered in the course of column operation. The parameters were estimated by minimizing the differences between the experimental and the model predicted concentration profiles at steady state conditions using non-linear optimisation technique. The estimated values were then correlated as functions of operating parameters and were incorporated in·the model equations. The model equations comprise a stiff differential~algebraic system. This system was solved using the GEAR ODE solver. The calculated concentration profiles were compared to those experimentally measured. A very good agreement of the two profiles was achieved within a percent relative error of ±2.S%. The developed rigorous dynamic model of the extraction column was used to derive linear time-invariant reduced-order models that relate the input variables (agitator speed, solvent feed flowrate and concentration, feed concentration and flowrate) to the output variables (raffinate concentration and extract concentration) using the asymptotic method of system identification. The reduced-order models were shown to be accurate in capturing the dynamic behaviour of the process with a maximum modelling prediction error of I %. The simplicity and accuracy of the derived reduced-order models allow for control system design and analysis of such complicated processes. The extraction column is a typical multivariable process with agitator speed and solvent feed flowrate considered as manipulative variables; raffinate concentration and extract concentration as controlled variables and the feeds concentration and feed flowrate as disturbance variables. The control system design of the extraction process was tackled as multi-loop decentralised SISO (Single Input Single Output) as well as centralised MIMO (Multi-Input Multi-Output) system using both conventional and model-based control techniques such as IMC (Internal Model Control) and MPC (Model Predictive Control). Control performance of each control scheme was. studied in terms of stability, speed of response, sensitivity to modelling errors (robustness), setpoint tracking capabilities and load rejection. For decentralised control, multiple loops were assigned to pair.each manipulated variable with each controlled variable according to the interaction analysis and other pairing criteria such as relative gain array (RGA), singular value analysis (SVD). Loops namely Rotor speed-Raffinate concentration and Solvent flowrate Extract concentration showed weak interaction. Multivariable MPC has shown more effective performance compared to other conventional techniques since it accounts for loops interaction, time delays, and input-output variables constraints.

Metaphor in (Arabic-into-English) translation with specific reference to metaphorical concepts and expressions in political discourse

Cognitive linguistics scholars argue that metaphor is fundamentally a conceptual process of mapping one domain of experience onto another domain. The study of metaphor in the context of Translation Studies has not, unfortunately, kept pace with the discoveries about the nature and role of metaphor in the cognitive sciences. This study aims primarily to fill part of this gap of knowledge. Specifically, the thesis is an attempt to explore some implications of the conceptual theory of metaphor for translation. Because the study of metaphor in translation is also based on views about the nature of translation, the thesis first presents a general overview of the discipline of Translation Studies, describing the major models of translation. The study (in Chapter Two) then discusses the major traditional theories of metaphor (comparison, substitution and interaction theories) and shows how the ideas of those theories were adopted in specific translation studies of metaphor. After that, the study presents a detailed account of the conceptual theory of metaphor and some hypothetical implications for the study of metaphor in translation from the perspective of cognitive linguistics. The data and methodology are presented in Chapter Four. A novel classification of conceptual metaphor is presented which distinguishes between different source domains of conceptual metaphors: physical, human-life and intertextual. It is suggested that each source domain places different demands on translators. The major sources of the data for this study are (1) the translations done by the Foreign Broadcasting Information Service (FBIS), which is a translation service of the Central Intelligence Agency (CIA) in the United Sates of America, of a number of speeches by the Iraqi president Saddam Hussein during the Gulf Crisis (1990-1991) and (2) official (governmental) Omani translations of National Day speeches of Sultan Qaboos bin Said of Oman.

Your students have excellent knowledge and skills but they don’t think about them...:a reflective learning project

This paper describes two phases of a project set up to encourage students to be more reflective about their studies and their career goals. it takes as its starting point a discussion with employers about the Jack of reflection that they observed in otherwise highly skilled management graduates. The project.examin!ld.a number of processes, including mentoring, logbooks and learning style questionnaires to gauge which was the most effective in inspiring students to be reflective. Having identified the best methods the project entered a second phase which involved rolling out the findings to large numbers of students. The challenges of doing this are analysed in the paper.

Servitization of manufacture:exploring the deployment and skills of people critical to the delivery of advanced services

Purpose - This "research note" sets out to fuel the debate around the practices and technologies within operations that are critical to success with servitization. It presents a study of four companies which are delivering advanced services and reports on the organisation and skill-sets of people within these. Design/methodology/approach - This has been case-based research at four manufacturers leading in their delivery of services. Findings - It describes the desirable behaviour of people in the front-line of service delivery, identifies the supporting skill-sets, how these people are organised, and explains why all these factors are so important. Originality/value - This paper contributes to the understanding of the servitization process and, in particular, the implications to broader operations of the firm. © 2013 Emerald Group Publishing Limited. All rights reserved.

Mathematical Model and Simulation of a Pneumatic Apparatus for In-Drilling Alignment of an Inertial Navigation Unit during Horizontal Well Drilling

Conventional methods in horizontal drilling processes incorporate magnetic surveying techniques for determining the position and orientation of the bottom-hole assembly (BHA). Such means result in an increased weight of the drilling assembly, higher cost due to the use of non-magnetic collars necessary for the shielding of the magnetometers, and significant errors in the position of the drilling bit. A fiber-optic gyroscope (FOG) based inertial navigation system (INS) has been proposed as an alternative to magnetometer -based downhole surveying. The utilizing of a tactical-grade FOG based surveying system in the harsh downhole environment has been shown to be theoretically feasible, yielding a significant BHA position error reduction (less than 100m over a 2-h experiment). To limit the growing errors of the INS, an in-drilling alignment (IDA) method for the INS has been proposed. This article aims at describing a simple, pneumatics-based design of the IDA apparatus and its implementation downhole. A mathematical model of the setup is developed and tested with Bloodshed Dev-C++. The simulations demonstrate a simple, low cost and feasible IDA apparatus.

Boundary spanning elements and the marketing function in organizations:concepts and empirical studies

This book presents current research on boundary spanning elements. The editors bring together extant knowledge in the field and present a uniform narrative. Previous studies have often been disseminated across several academic disciplines like services marketing, personal selling and sales management etc. and this monograph aggregates studies dealing with boundary spanning elements or has boundary spanning elements related to the marketing function as the main empirical platform under a uniform theoretical perspective. Each chapter in the book deals with an important research theme and synthesizes studies in relation to boundary spanning elements.

Applied Aspects of Mathematical Modeling and Optimization of Dynamics of Charged Beams

The complex of questions connected with the analysis, estimation and structural-parametrical optimization of dynamic system is considered in this article. Connection of such problems with tasks of control by beams of trajectories is emphasized. The special attention is concentrated on the review and analysis of spent scientific researches, the attention is stressed to their constructability and applied directedness. Efficiency of the developed algorithmic and software is demonstrated on the tasks of modeling and optimization of output beam characteristics in linear resonance accelerators.

Mathematical Modeling and Simulation of Radial Temperature Profile of Strontium Bromide Lasers

For metal and metal halide vapor lasers excited by high frequency pulsed discharge, the thermal effect mainly caused by the radial temperature distribution is of considerable importance for stable laser operation and improvement of laser output characteristics. A short survey of the obtained analytical and numerical-analytical mathematical models of the temperature profile in a high-powered He-SrBr2 laser is presented. The models are described by the steady-state heat conduction equation with mixed type nonlinear boundary conditions for the arbitrary form of the volume power density. A complete model of radial heat flow between the two tubes is established for precise calculating the inner wall temperature. The models are applied for simulating temperature profiles for newly designed laser. The author’s software prototype LasSim is used for carrying out the mathematical models and simulations.

Developing Students’ Mathematical Thinking and Algorithmic Culture in IT Classes

Report published in the Proceedings of the National Conference on "Education in the Information Society", Plovdiv, May, 2012

A (szabadidő)sport alapfogalmai és kutatott területei = The basic concepts and researched areas of (leisure)sport

A tanulmány a jövőbeni szabadidősport-kutatásokhoz egyfajta alapként fogalmi áttekintést ad a szabadidőről és a sport különböző aspektusairól, kutatott területeiről, valamint a szabadidősport közgazdasági értelemben vett hasznosságáról, egyén, társadalom, gazdaság és vállalatok szintjén. = This paper would like to give an overview about the different concepts and aspects of leisure and sport, list the different areas researchers deal with, and show a picture about the utility of leisure sport in connection with human being, society, economy and companies, with the purpose of founding the coming leisure-sport researches.

Analysis of Students’ Misconceptions and Error Patterns in Mathematics: The Case of Fractions

This study analyzed three fifth grade students’ misconceptions and error patterns when working with equivalence, addition and subtraction of fractions. The findings revealed that students used both conceptual and procedural knowledge to solve the problems. They used pictures, gave examples, and made connections to other mathematical concepts and to daily life topics. Error patterns found include using addition and subtraction of numerators and denominators, and finding the greatest common factor.

DNA vaccination for prostate cancer: key concepts and considerations

While locally confined prostate cancer is associated with a low five year mortality rate, advanced or metastatic disease remains a major challenge for healthcare professionals to treat and is usually terminal. As such, there is a need for the development of new, efficacious therapies for prostate cancer. Immunotherapy represents a promising approach where the host's immune system is harnessed to mount an anti-tumour effect, and the licensing of the first prostate cancer specific immunotherapy in 2010 has opened the door for other immunotherapies to gain regulatory approval. Among these strategies DNA vaccines are an attractive option in terms of their ability to elicit a highly specific, potent and wide-sweeping immune response. Several DNA vaccines have been tested for prostate cancer and while they have demonstrated a good safety profile they have faced problems with low efficacy and immunogenicity compared to other immunotherapeutic approaches. This review focuses on the positive aspects of DNA vaccines for prostate cancer that have been assessed in preclinical and clinical trials thus far and examines the key considerations that must be employed to improve the efficacy and immunogenicity of these vaccines.

New methods for movement technique development in cross-country skiing using mathematical models and simulation

This Licentiate Thesis is devoted to the presentation and discussion of some new contributions in applied mathematics directed towards scientific computing in sports engineering. It considers inverse problems of biomechanical simulations with rigid body musculoskeletal systems especially in cross-country skiing. This is a contrast to the main research on cross-country skiing biomechanics, which is based mainly on experimental testing alone. The thesis consists of an introduction and five papers. The introduction motivates the context of the papers and puts them into a more general framework. Two papers (D and E) consider studies of real questions in cross-country skiing, which are modelled and simulated. The results give some interesting indications, concerning these challenging questions, which can be used as a basis for further research. However, the measurements are not accurate enough to give the final answers. Paper C is a simulation study which is more extensive than paper D and E, and is compared to electromyography measurements in the literature. Validation in biomechanical simulations is difficult and reducing mathematical errors is one way of reaching closer to more realistic results. Paper A examines well-posedness for forward dynamics with full muscle dynamics. Moreover, paper B is a technical report which describes the problem formulation and mathematical models and simulation from paper A in more detail. Our new modelling together with the simulations enable new possibilities. This is similar to simulations of applications in other engineering fields, and need in the same way be handled with care in order to achieve reliable results. The results in this thesis indicate that it can be very useful to use mathematical modelling and numerical simulations when describing cross-country skiing biomechanics. Hence, this thesis contributes to the possibility of beginning to use and develop such modelling and simulation techniques also in this context.

Sociocultural context as a facilitator of student learning of function concepts in mathematics

In Costa Rica, many secondary students have serious difficulties to establish relationships between mathematics and real-life contexts. They question the utilitarian role of the school mathematics. This fact motivated the research object of this report which evidences the need to overcome methodologies unrelated to students’ reality, toward new didactical options that help students to value mathematics, reasoning and its  applications, connecting it with their socio-cultural context. The research used a case study as a qualitative methodology and the social constructivism as an educational paradigm in which the knowledge is built by the student; as a product of his social interactions. A collection of learning situations was designed, validated, and implemented. It allowed establishing relationships between mathematical concepts and the socio-cultural context of participants. It analyzed the impact of students’socio-cultural context in their mathematics learning of basic concepts of real variable functions, consistent with the Ministry of Education (MEP) Official Program.  Among the results, it was found that using students’sociocultural context improved their motivational processes, mathematics sense making, and promoted cooperative social interactions. It was evidenced that contextualized learning situations favored concepts comprehension that allow students to see mathematics as a discipline closely related with their every-day life.

Part-time and fractional staff in the learning and skills sector

This Universities and College Union Launch Event presentation reported on the findings of Learning and Skills Research Network (LSRN) London and South East (LSE) Regional Research Project. The presentation reflected on research carried out during 2002-06 on the development and deployment of part-time staff in the Learning and Skills Sector. Although the lifelong learning sector is the largest UK education sector, little attention has as yet been paid to the role of LSC sector part-time staff. Worrying trends of an increasing casualisation of staffing have been reported. The role of part-timers as highly committed (philanthropic) but generally underpaid and exploited staff (ragged-trousered) emerged from the data collected by this investigation, which examined the role of part-timers in several colleges and adult education institutions in London and the South East. The metaphor of the 'ragged-trousered philanthropist' was consciously selected to investigate the interactivity between philantrophy, employment practices for PT staff, and education as social action, in addressing the need for good practice to achieve quality outcomes in learning and teaching. The results are to some extent transferable to other education and training sectors employing part-time staff, e.g. higher education institutions and work-based training organisations.