A simple and low-cost airlift photobioreactor for microalgal mass culture

A simple, low-cost, and efficient airlift photobioreactor for microalgal mass culture was designed and developed. The reactor was made of Plexiglas, and composed of three major parts: outer tube, draft tube and air duct. The fluid-dynamic characteristics of the airlift reactor were studied. The system proved to be well suited to the mass cultivation of a marine microalga, Chlorella sp. In batch culture, the biomass volumetric output rate of 0.21 g l(-1) d(-1) was obtained at the superficial gas velocity of 4 mm s(-1) in the draft tube.

Nanofabrication at high throughput and low cost.

The task of nanofabrication can, in principle, be divided into two separate tracks: generation and replication of the patterned features. These two tracks are different in terms of characteristics, requirements, and aspects of emphasis. In general, generation of patterns is commonly achieved in a serial fashion using techniques that are typically slow, making this process only practical for making a small number of copies. Only when combined with a rapid duplication technique will fabrication at high-throughput and low-cost become feasible. Nanoskiving is unique in that it can be used for both generation and duplication of patterned nanostructures.

A low-cost, portable, and quantitative spectral imaging system for application to biological tissues.

The ability of diffuse reflectance spectroscopy to extract quantitative biological composition of tissues has been used to discern tissue types in both pre-clinical and clinical cancer studies. Typically, diffuse reflectance spectroscopy systems are designed for single-point measurements. Clinically, an imaging system would provide valuable spatial information on tissue composition. While it is feasible to build a multiplexed fiber-optic probe based spectral imaging system, these systems suffer from drawbacks with respect to cost and size. To address these we developed a compact and low cost system using a broadband light source with an 8-slot filter wheel for illumination and silicon photodiodes for detection. The spectral imaging system was tested on a set of tissue mimicking liquid phantoms which yielded an optical property extraction accuracy of 6.40 +/- 7.78% for the absorption coefficient (micro(a)) and 11.37 +/- 19.62% for the wavelength-averaged reduced scattering coefficient (micro(s)').

Computer vision tools for low-cost and noninvasive measurement of autism-related behaviors in infants.

The early detection of developmental disorders is key to child outcome, allowing interventions to be initiated which promote development and improve prognosis. Research on autism spectrum disorder (ASD) suggests that behavioral signs can be observed late in the first year of life. Many of these studies involve extensive frame-by-frame video observation and analysis of a child's natural behavior. Although nonintrusive, these methods are extremely time-intensive and require a high level of observer training; thus, they are burdensome for clinical and large population research purposes. This work is a first milestone in a long-term project on non-invasive early observation of children in order to aid in risk detection and research of neurodevelopmental disorders. We focus on providing low-cost computer vision tools to measure and identify ASD behavioral signs based on components of the Autism Observation Scale for Infants (AOSI). In particular, we develop algorithms to measure responses to general ASD risk assessment tasks and activities outlined by the AOSI which assess visual attention by tracking facial features. We show results, including comparisons with expert and nonexpert clinicians, which demonstrate that the proposed computer vision tools can capture critical behavioral observations and potentially augment the clinician's behavioral observations obtained from real in-clinic assessments.

Ultra-fine pitch stencil printing for a low cost and low temperature flip-chip assembly process

This paper presents the results of a packaging process based on the stencil printing of isotropic conductive adhesives (ICAs) that form the interconnections of flip-chip bonded electronic packages. Ultra-fine pitch (sub-100-mum), low temperature (100degC), and low cost flip-chip assembly is demonstrated. The article details recent advances in electroformed stencil manufacturing that use microengineering techniques to enable stencil fabrication at apertures sizes down to 20mum and pitches as small as 30mum. The current state of the art for stencil printing of ICAs and solder paste is limited between 150-mum and 200-mum pitch. The ICAs-based interconnects considered in this article have been stencil printed successfully down to 50-mum pitch with consistent printing demonstrated at 90-mum pitch size. The structural integrity or the stencil after framing and printing is also investigated through experimentation and computational modeling. The assembly of a flip-chip package based on copper column bumped die and ICA deposits stencil printed at sub-100-mum pitch is described. Computational fluid dynamics modeling of the print performance provides an indicator on the optimum print parameters. Finally, an organic light emitting diode display chip is packaged using this assembly process

Age and gender influences on sensory perceptions of novel low cost nutrient-rich food products developed using traditional Ghanaian food ingredients

Background: A number of factors are known to influence food preferences and acceptability of new products. These include their sensory characteristics and strong, innate neural influences. In designing foods for any target group, it is important to consider intrinsic and extrinsic characteristics which may contribute to palatability, and acceptability of foods. Objective: To assess age and gender influences on sensory perceptions of novel low cost nutrient-rich food products developed using traditional Ghanaian food ingredients. Materials and Methods: In this study, a range of food products were developed from Ghanaian traditional food sources using the Food Multimix (FMM) concept. These products were subjected to sensory evaluation to assess the role of sensory perception on their acceptability among different target age groups across the life cycle (aged 11-68 years olds) and to ascertain any possible influences of gender on preference and choice. Variables including taste, odour, texture, flavour and appearance were tested and the results captured on a Likert scale and scores of likeness and acceptability analysed. Multivariate analyses were used to develop prediction models for targeted recipe development for different target groups. Multiple factor analysis of variance (ANOVA) and logistic linear regression were employed to test the strength of acceptability and to ascertain age and gender influences on product preference. Results: The results showed a positive trend in acceptability (r = 0.602) which tended towards statistical significance (p = 0.065) with very high product favourability rating (91% acceptability; P=0.005). However, age [odds ratios=1.44 (11-15 years old) odds ratios=2.01 (18-68 years old) and gender (P=0.000)] were major influences on product preference with children and females (irrespective of age) showing clear preferences or dislike of products containing certain particular ingredients. Conclusion: These findings are potentially useful in planning recipes for feeding interventions involving different vulnerable and target groups.

Efficient, halide free synthesis of new, low cost ionic liquids: 1,3-dialkylimidazolium salts containing methyl- and ethyl-sulfate anions

New low-cost ionic liquids containing methyl- and ethyl-sulfate anions can be easily and efficiently prepared under ambient conditions by the reaction of 1-alkylimidazoles with dimethyl sulfate and diethyl sulfate. The preparation and characterization of a series of 1,3-dialkylimidazolium alkyl sulfate and 1,2,3-trialkylimidazolium alkyl sulfate salts are reported. 1,3-Dialkylimidazolium salts containing at least one non-methyl N-alkyl substituent are liquids at, or below room, temperature. Three salts were crystalline at room temperature, the single crystal X-ray structure of 1,3-dimethylimidazolium methyl sulfate was determined and shows the formation of discrete ribbons comprising of two anion-cation hydrogen-bonded chains linked via intra-chain hydrogen-bonding, but little, or no inter-ribbon hydrogen-bonding. The salts are stable, water soluble, inherently 'chloride-free', display an electrochemical window of greater than 4 V, and can be used as alternatives to the corresponding halide salts in metathesis reactions to prepare other ionic liquids including 1-butyl-3-methylimidazolium hexafluorophosphate.