Metabolic syndrome and nonalcoholic fatty liver disease: Is insulin resistance the link?

Metabolic syndrome (MetS) is a disease composed of different risk factors such as obesity, type 2 diabetes or dyslipidemia. The prevalence of this syndrome is increasing worldwide in parallel with the rise in obesity. Nonalcoholic fatty liver disease (NAFLD) is now the most frequent chronic liver disease in western countries, affecting more than 30% of the general population. NAFLD encompasses a spectrum of liver manifestations ranging from simple steatosis to nonalcoholic steatohepatitis (NASH), fibrosis and cirrhosis, which may ultimately progress to hepatocellular carcinoma. There is accumulating evidence supporting an association between NAFLD and MetS. Indeed, NAFLD is recognized as the liver manifestation of MetS. Insulin resistance is increasingly recognized as a key factor linking MetS and NAFLD. Insulin resistance is associated with excessive fat accumulation in ectopic tissues, such as the liver, and increased circulating free fatty acids, which can further promote inflammation and endoplasmic reticulum stress. This in turn aggravates and maintains the insulin resistant state, constituting a vicious cycle. Importantly, evidence shows that most of the patients developing NAFLD present at least one of the MetS traits. This review will define MetS and NAFLD, provide an overview of the common pathophysiological mechanisms linking MetS and NAFLD, and give a perspective regarding treatment of these ever growing metabolic diseases.

Exploring the link between flexible working and organizational performance

The expansion of flexible work experienced since the 1980s in developed economies is consistent with a more generic trend towards organizational flexibility, which many authors see as essential in order to compete in the dynamic global environment (Volberda, 1998). From this point of view, the changing demands of the environment have forced organizations to seek the ability to adapt rapidly and effectively as a means to be successful or even to survive. In the quest for flexibility, every area of the organization has been scrutinized in order to render it as ¿agile¿ as possible. In the human resources arena, this analysis has led to the definition of diverse ¿flexible working practices¿ (FWP) that describe a wide range of employment practices, which differ from the traditional full-time job with a fixed salary and a permanent contract. These practices have been described using other terms, such as ¿alternative¿ (Polivka, 1996; Powell & Mainiero, 1999), ¿non-standard¿ (Kalleberg, 2000), or ¿atypical¿ (De Grip, Hoevenberg, &m Willems, 1997), which coincide in denoting their divergence from the most traditional forms of employment. This article will show that quite different practices have been embraced by the common term ¿flexible working practices.¿ Subsequently, the results of empirical research regarding the implications for organizational performance of a number of flexible practices will be commented on.

A missing spatial link in institutional quality

History tells that institutions evolve gradually over time, pushing new ideas across borders and cultures. Globalisation is argued to accelerate this process. We examine the spatial links of different political institutions across borders. Applying various tests for spatial proximity, we do not find evidence of contemporaneous spatial links. This result is robust to various measures of distance and of cultural proximity across countries. Instead, when we analyse long run dynamics diffusion of institutions seems to occur only gradually.

Particle detector link system modifications in RE1/1 sector

The large hadron collider constructed at the European organization for nuclear research, CERN, is the world’s largest single measuring instrument ever built, and also currently the most powerful particle accelerator that exists. The large hadron collider includes six different experiment stations, one of which is called the compact muon solenoid, or the CMS. The main purpose of the CMS is to track and study residue particles from proton-proton collisions. The primary detectors utilized in the CMS are resistive plate chambers (RPCs). To obtain data from these detectors, a link system has been designed. The main idea of the link system is to receive data from the detector front-end electronics in parallel form, and to transmit it onwards in serial form, via an optical fiber. The system is mostly ready and in place. However, a problem has occurred with innermost RPC detectors, located in sector labeled RE1/1; transmission lines for parallel data suffer from signal integrity issues over long distances. As a solution to this, a new version of the link system has been devised, a one that fits in smaller space and can be located within the CMS, closer to the detectors. This RE1/1 link system has been so far completed only partially, with just the mechanical design and casing being done. In this thesis, link system electronics for RE1/1 sector has been designed, by modifying the existing link system concept to better meet the requirements of the RE1/1 sector. In addition to completion of the prototype of the RE1/1 link system electronics, some testing for the system has also been done, to ensure functionality of the design.

Trigger and data link system for CMS Resistive Plate Chambers at the LHC accelerator

The purpose of the work was to realize a high-speed digital data transfer system for RPC muon chambers in the CMS experiment on CERN’s new LHC accelerator. This large scale system took many years and many stages of prototyping to develop, and required the participation of tens of people. The system interfaces to Frontend Boards (FEB) at the 200,000-channel detector and to the trigger and readout electronics in the control room of the experiment. The distance between these two is about 80 metres and the speed required for the optic links was pushing the limits of available technology when the project was started. Here, as in many other aspects of the design, it was assumed that the features of readily available commercial components would develop in the course of the design work, just as they did. By choosing a high speed it was possible to multiplex the data from some the chambers into the same fibres to reduce the number of links needed. Further reduction was achieved by employing zero suppression and data compression, and a total of only 660 optical links were needed. Another requirement, which conflicted somewhat with choosing the components a late as possible was that the design needed to be radiation tolerant to an ionizing dose of 100 Gy and to a have a moderate tolerance to Single Event Effects (SEEs). This required some radiation test campaigns, and eventually led to ASICs being chosen for some of the critical parts. The system was made to be as reconfigurable as possible. The reconfiguration needs to be done from a distance as the electronics is not accessible except for some short and rare service breaks once the accelerator starts running. Therefore reconfigurable logic is extensively used, and the firmware development for the FPGAs constituted a sizable part of the work. Some special techniques needed to be used there too, to achieve the required radiation tolerance. The system has been demonstrated to work in several laboratory and beam tests, and now we are waiting to see it in action when the LHC will start running in the autumn 2008.

Web services to link interlibrary software with OCLC WorldShare

Purpose - This article describes the use of web services to interconnect the GTBib interlibrary loan program with the OCLC WorldShare platform. Design/methodology/approach - We describe the current problem of duplication of procedures in libraries that have added their collections to the OCLC WorldCat catalogue in recent years and are therefore more likely to receive interlibrary loan requests through the WorldShare Platform. Findings - A solution that uses web services to insert and retrieve requests between the two systems is presented. Autonomous agents periodically check the status of the requests and keep them updated and synchronized. These agents also inform the library staff of any variation or inconsistency that is detected. Practical Implications - This technology reduces process management time by making it unnecessary to introduce the request data in both systems. Agents are used to check the consistency of statuses between the two systems, thus avoiding errors and omissions and improving the efficiency of the whole interlibrary loan process. Originality/value - This paper describes in detail the technical aspects of the solution as a reference for the development of future applications.

Myoglobins: the link between discoloration and lipid oxidation in muscle and meat

Aerobic metabolism changes rapidly to glycolysis post-mortem resulting in a pH-decrease during the transformation of muscle in to meat affecting ligand binding and redox potential of the heme iron in myoglobin, the meat pigment. The "inorganic chemistry" of meat involves (i) redox-cycling between iron(II), iron(III), and iron(IV)/protein radicals; (ii) ligand exchange processes; and (iii) spin-equilibra with a change in coordination number for the heme iron. In addition to the function of myoglobin for oxygen storage, new physiological roles of myoglobin are currently being discovered, which notably find close parallels in the processes in fresh meat and nitrite-cured meat products. Myoglobin may be characterized as a bioreactor for small molecules like O2, NO, CO, CO2, H2O, and HNO with importance in bio-regulation and in protection against oxidative stress in vivo otherwise affecting lipids in membranes. Many of these processes may be recognised as colour changes in fresh meat and cured meat products under different atmospheric conditions, and could also be instructive for teaching purposes.

Parâmetros bioquímicos foliares das espécies Licania tomentosa (Benth.) e Bauhinia forficata (Link.) para avaliação da qualidade do ar

Foliar analysis of biochemical parameters were carried out in order to investigate the influence of air pollutants on two tropical tree species (Licania tomentosa (Benth.) and Bauhinia forfícata (Link.)). Special attention was given to tropospheric ozone due to the fact that concentration levels in the region were found to be up to 140 µg m-3 for a 4 h average time, which is well above the value that can cause injuries to orchides and tobacco (59 µg m-3). Other pollutants such as nitrogen and sulphur oxides were measured and their ambient concentrations were also associated to biochemical alterations in the investigated species.

Avaliação de procedimentos para quantificação espectrofotométrica de flavonoides totais em folhas de Bauhinia forficata Link

Interest in analytical methods for quality control of herbal drugs has grown sharply due to the scarcity of monographs in official manuals. Thus, the aim of the present study was to evaluate analytical procedures for quantitative determination of flavonoids from leaves of Bauhinia forficata Link (pata-de-vaca). Two procedures for quantification of total flavonoids (with and without acid hydrolysis) by spectrophotometry were tested. The proposed methods proved to be specific, sensitive, precise, accurate and robust, being suitable for routine laboratory use.

The harm principle and the greatest happiness principle: the missing link

In this article I present a possible solution for the classic problem of the apparent incompatibility between Mill's Greatest Happiness Principle and his Principle of Liberty arguing that in the other-regarding sphere the judgments of experience and knowledge accumulated through history have moral and legal force, whilst in the self-regarding sphere the judgments of the experienced people only have prudential value and the reason for this is the idea according to which each of us is a better judge than anyone else to decide what causes us pain and which kind of pleasure we prefer (the so-called epistemological argument). Considering that the Greatest Happiness Principle is nothing but the aggregate of each person's happiness, given the epistemological claim we conclude that, by leaving people free even to cause harm to themselves, we still would be maximizing happiness, so both principles (the Greatest Happiness Principle and the Principle of Liberty) could be compatible.

Modeling and Analysis of Noise and Interconnects for On-Chip Communication Link Design

This thesis considers modeling and analysis of noise and interconnects in onchip communication. Besides transistor count and speed, the capabilities of a modern design are often limited by on-chip communication links. These links typically consist of multiple interconnects that run parallel to each other for long distances between functional or memory blocks. Due to the scaling of technology, the interconnects have considerable electrical parasitics that affect their performance, power dissipation and signal integrity. Furthermore, because of electromagnetic coupling, the interconnects in the link need to be considered as an interacting group instead of as isolated signal paths. There is a need for accurate and computationally effective models in the early stages of the chip design process to assess or optimize issues affecting these interconnects. For this purpose, a set of analytical models is developed for on-chip data links in this thesis. First, a model is proposed for modeling crosstalk and intersymbol interference. The model takes into account the effects of inductance, initial states and bit sequences. Intersymbol interference is shown to affect crosstalk voltage and propagation delay depending on bus throughput and the amount of inductance. Next, a model is proposed for the switching current of a coupled bus. The model is combined with an existing model to evaluate power supply noise. The model is then applied to reduce both functional crosstalk and power supply noise caused by a bus as a trade-off with time. The proposed reduction method is shown to be effective in reducing long-range crosstalk noise. The effects of process variation on encoded signaling are then modeled. In encoded signaling, the input signals to a bus are encoded using additional signaling circuitry. The proposed model includes variation in both the signaling circuitry and in the wires to calculate the total delay variation of a bus. The model is applied to study level-encoded dual-rail and 1-of-4 signaling. In addition to regular voltage-mode and encoded voltage-mode signaling, current-mode signaling is a promising technique for global communication. A model for energy dissipation in RLC current-mode signaling is proposed in the thesis. The energy is derived separately for the driver, wire and receiver termination.

Efecto del volumen radicular sobre el crecimiento de Acacia dealbata Link. en vivero y en terreno en el secano de la Región del Biobío, Chile

Entre las especies arbóreas cultivadas en Chile, Acacia dealbata Link. se destaca por su rápido crecimiento y supervivencia en climas con marcado déficit hídrico y suelos altamente degradados. Aun cuando proporciona múltiples productos y servicios, la mayor parte de la investigación se ha centrado caracterizar su capacidad invasora, y poco se conoce respecto a su crecimiento durante los primeros años en terreno, escaseando antecedentes respecto efecto de la modificación de las prácticas silvícolas durante la producción y establecimiento de plantas. Por ello, este estudio analiza el efecto de la modificación del volumen radicular sobre el crecimiento durante la viverización, y la supervivencia y crecimiento culminadas la primera y segunda temporada en terreno. Finalizada la viverización resultó significativo el efecto del volumen radicular sobre el DAC y la altura total (P<0,05), los mayores valores se obtuvieron en plantas producidas con volumen de 100 cm³. Los volúmenes más altos presentaron los mayores índices de esbeltez y de Dickson (P<0.05), mientras que los mejores índices tallo/raíz se observaron con los volúmenes de 56 y 24 cm³ (P<0,05). Culminadas la primera y segunda temporada de crecimiento el efecto del volumen sobre la supervivencia resultó no significativo. Luego de la segunda temporada, se destacó el mayor incremento corriente anual en DAC del tratamiento de 24 cm³ (5,53 ± 1,63 mm). Luego de ambas temporadas se destacó una tendencia a la igualación en altura entre los tratamientos de 100, 80 y 24 cm³, el mayor crecimiento absoluto y relativo se observó en el tratamiento de 24 cm³.

Influence of Link Structure on Search Engine Result Pages of Online Nursery Shops

The primary objective of this thesis is to assess how the backlink portfolio structure and off site Search Engine Optimisation (SEO) elements influence ranking of UK based online nursery shops. The growth of the internet use demanded significant effort from companies to optimize and increase their online presence in order to cope with the increasing online competition. The new e-Commerce technology - called Search Engine Optimisation - has been developed that helped increase website visibility of companies. The SEO process involves on site elements (i.e. changing the parameters of the company's website such as keywords, title tags and meta descriptions) and off site elements (link building and social media marketing activity). Link Building is based on several steps of marketing planning including keyword research and competitor analysis. The underlying goal of keyword research is to understand the targeted market through identifying relevant keyword queries that are used by targeted costumer group. In the analysis, three types (geographic, field and company’s strategy related) and seven sources of keywords has been identified and used as a base of analysis. Following the determination of the most popular keywords, allinanchor and allintitle search has been conducted and the first ten results of the searches have been collected to identify the companies with the most significant web presence among the nursery shops. Finally, Link Profiling has been performed where the essential goal was to understand to what extent other companies' link structure is different that the base company's backlinks. Significant difference has been found that distinguished the top three companies ranking in the allinanchor and allintitle search. The top three companies, „Mothercare”, „Mamas and Papas” and „Kiddicare” maintained significantly better metrics regarding domain and page authority on the main landing pages, the average number of outbound links for link portfolio metric and in number of backlinks. These companies also ranked among the highest in page authority distribution and followed external linking.

Open > Link > GO! Datan avaamisesta kirjastomaailmassa/-lla

Esitys Kirjastoverkkopäivillä 25.10.2012 Helsingissä