Interactions between climatic variables controlling subalpine tree growth: implications for climatic history of the Sierra Nevada, California

EXTRACT (SEE PDF FOR FULL ABSTRACT): Tree-ring records from foxtail pine (Pinus balfouriana) and western juniper (Juniperus occidentalis) growing near tree line in the eastern Sierra Nevada, California, show strong correlations with summer temperature and winter precipitation. Response surfaces portraying tree growth as a function of summer temperature and winter precipitation indicate a strong interaction between these variables in controlling growth. ... Above average growth for both foxtail pine and western juniper from AD 1480 to 1570 can be interpreted as indicating an extended period of warm, moist conditions unequalled during the 20th century.

Limnological studies of a freshwater tropical impoundment : Powai Lake. 1: Morphometry and physical features

Powai Lake, an impoundment, came into existence in 1891 when the riverlet Dhanisar was dammed to conserve rainwater for drinking purpose. However, the water was found to be unpotable and the lake was leased out to the Angling Association, Bombay, exclusively for angling and sports. The lake is located about 27 km in the northeast of Bombay city at a height of 55m above MSL. It is rainfed with an average rainfall of 2,400 mm. The maximum waterspread area is 220 ha with a maximum capacity of 8.11 million m super(3) in the peak monsoon period when the water overflows the dam. There is no drawdown from the lake. Fluctuation in the water level is mainly due to evaporation and percolation. Transparency is low mainly due to suspended organic particles. There is hardly any difference in the water temperatures of surface and bottom, hence the annual heat budget is low at 2,818 cal m super(-2).

Limnological conditions of naturally turbid ponds and its effects on fish growth

An experiment was conducted on six naturally turbid ponds in the village of Salakandi situated to the south-west corner of Bangladesh Agricultural University, Mymensingh for a period of three months from July to September '96. The experiment was performed by studying the physicochemical factors of water and soil, the biological factors such as densities of phytoplankton and zooplankton, and the growth of fishes. During the experimental period water turbidity varied among ponds. The highest value of turbidity was found to be 679±183.6 FTU in pond 1 and the lowest was 158±23.31 FTU in pond 4. The maximum and the minimum water transparency were recorded in the month of July and September respectably. The lowest net weight of fishes was found 28.8 kg/ha/year in pond 1 due to high turbidity and the highest was 35.8 kg/ha/year in pond 4 due to low turbidity. Most of the correlations between turbidity and transparency, phytoplankton, and zooplankton were significant at 1% and 5% levels.

Physical variables, nutrient status and primary productivity of Kyoga Basin lakes of Lemwa, Omunuo, Gawa, Adois and Owapet

The review report on Kyoga basin lakes (NAFIRRI 2007) described Kyoga basin lakes as important natural resource for the communities within the basin and the surrounding areas. Fisheries of the basin provide a source of protein, income, and employment to generally poor communities in the area. The lakes also generate revenue to the local Governments within the catchment. This indicates that the fisheries of Kyoga basin lakes are a key instrument in poverty eradication and food security. The lakes also act as a source of water for domestic, agricultural and transport purposes. Some of the Kyoga small lakes harbour fish species, which have disappeared from the main lakes Victoria and Kyoga and are therefore important for biodiversity conservation

Discriminant analysis of selected variables in the adoption of fish curing

Discriminant functions were worked out for adoption or non-adoption of five improved practices in fish curing. Four variables measured quantitatively formed the basis for discrimination. In four out of five equations, the selected variables were found to discriminate significantly between the adopters and non-adopters.

Geographic variation of Chevrier's field mouse (Apodemus chevrieri) (Milne-Edwards, 1868) (Muridae : Murinae) from southwestern China based on cranial morphometric variables

Geographic variation of Chevrier's field mouse (Apodemus chevrieri) (Milne-Edwards, 1868) (Muridae: Murinae) from southwestern China based on cranial morphometric variables. Zoological Studies 47(4): 393-401. A sample of 134 specimens of Apodemus chevrieri was investigated in the present study. Individuals were divided into male and female groups, and these were respectively subjected to multivariate analysis. Results indicated that 3 geographic populations of A. chevrieri inhabit southwestern China: a Sichuan population in western Sichuan Province; a northwestern Yunnan population ranging from northwestern Yunnan Province eastward to southern Sichuan Province; and a central Yunnan population in central Yunnan Province. In addition, a coefficient of difference analysis was performed among these 3 geographic populations. The results suggested that these 3 geographical populations of A. chevrieri belonged to 2 subspecies. Furthermore, we discuss the relationships of the subspecific differentiation of A. chevneri with changes in latitude in southwestern China.

Geographic variation of the Perny's Long-nosed squirrels (Dremomys pernyi) (Milne-Edwards, 1867) (Rodentia : Sciuridae) from southwestern China based on cranial morphometric variables

A sample of 114 specimens of Dremomys pernyi was investigated, 73 of which had intact skulls and were subjected to multivariate, coefficient of difference (C. D.), and cluster analyses. Results indicate that 4 subspecies (groups) of Dremomys pernyi inhabi

Geographic variation of the Anderson's Niviventer (Niviventer andersoni) (Thomas, 1911) (Rodentia: Muridae) of two new subspecies in China verified with cranial morphometric variables and pelage characteristics

A total of 66 specimens of Niviventer andersoni with intact skulls was investigated on pelage characteristics and cranial morphometric variables. The data were subjected to principal component analyses as well as to discriminant analyses, and measurement

The relevance of limnological information in the development and management of inland fisheries

The purpose of this paper is not to justify the existence of limnologists in fishery science, but to illustrate the now well accepted view that limnology holds the key to the understanding of fish production, and that an understanding of environmental relationships and the modification rates at all trophic levels must be the basis of enlightened management.

Past and present limnological investigations in Uganda: an overview

The limnological investigations in Uganda freshwaters which were started in the 1920s looked into: the origins, the changing geological and climatic factors which gave rise to the characteristic inland waters; the primary production; the constituent small aquatic organisms and their ecology; and their bordering swamps. Most of them were formed immediately after the formation of the great Western rift valley. Almost all the inland waters in Uganda are typical tropical freshwaters which, because of their relative shallowness, experience rather frequent wind stirrings and therefore nutrient circulation which would make them relatively productive. Many physical, biological and chemical factors come into play to finally determine this. The present investigations continue to bridge the gaps which were left and also to collect the baseline data needed to later manage, monitor and control any possible pollution risks.

Multi-objective optimisation of horizontal axis wind turbine structure and energy production using aerofoil and blade properties as design variables

The design of wind turbine blades is a true multi-objective engineering task. The aerodynamic effectiveness of the turbine needs to be balanced with the system loads introduced by the rotor. Moreover the problem is not dependent on a single geometric property, but besides other parameters on a combination of aerofoil family and various blade functions. The aim of this paper is therefore to present a tool which can help designers to get a deeper insight into the complexity of the design space and to find a blade design which is likely to have a low cost of energy. For the research we use a Computational Blade Optimisation and Load Deflation Tool (CoBOLDT) to investigate the three extreme point designs obtained from a multi-objective optimisation of turbine thrust, annual energy production as well as mass for a horizontal axis wind turbine blade. The optimisation algorithm utilised is based on Multi-Objective Tabu Search which constitutes the core of CoBOLDT. The methodology is capable to parametrise the spanning aerofoils with two-dimensional Free Form Deformation and blade functions with two tangentially connected cubic splines. After geometry generation we use a panel code to create aerofoil polars and a stationary Blade Element Momentum code to evaluate turbine performance. Finally, the obtained loads are fed into a structural layout module to estimate the mass and stiffness of the current blade by means of a fully stressed design. For the presented test case we chose post optimisation analysis with parallel coordinates to reveal geometrical features of the extreme point designs and to select a compromise design from the Pareto set. The research revealed that a blade with a feasible laminate layout can be obtained, that can increase the energy capture and lower steady state systems loads. The reduced aerofoil camber and an increased L/. D-ratio could be identified as the main drivers. This statement could not be made with other tools of the research community before. © 2013 Elsevier Ltd.

Free energy surface reconstruction from umbrella samples using Gaussian process regression II: Multiple collective variables

We demonstrate how a prior assumption of smoothness can be used to enhance the reconstruction of free energy profiles from multiple umbrella sampling simulations using the Bayesian Gaussian process regression approach. The method we derive allows the concurrent use of histograms and free energy gradients and can easily be extended to include further data. In Part I we review the necessary theory and test the method for one collective variable. We demonstrate improved performance with respect to the weighted histogram analysis method and obtain meaningful error bars without any significant additional computation. In Part II we consider the case of multiple collective variables and compare to a reconstruction using least squares fitting of radial basis functions. We find substantial improvements in the regimes of spatially sparse data or short sampling trajectories. A software implementation is made available on www.libatoms.org.

Forecasting Daily Chlorophyll a Concentration during the Spring Phytoplankton Bloom Period in Xiangxi Bay of the Three-Gorges Reservoir by Means of a Recurrent Artificial Neural Network

A recurrent artificial neural network was used for 0-and 7-days-ahead forecasting of daily spring phytoplankton bloom dynamics in Xiangxi Bay of Three-Gorges Reservoir with meteorological, hydrological, and limnological parameters as input variables. Daily data from the depth of 0.5 m was used to train the model, and data from the depth of 2.0 m was used to validate the calibrated model. The trained model achieved reasonable accuracy in predicting the daily dynamics of chlorophyll a both in 0-and 7-days-ahead forecasting. In 0-day-ahead forecasting, the R-2 values of observed and predicted data were 0.85 for training and 0.89 for validating. In 7-days-ahead forecasting, the R-2 values of training and validating were 0.68 and 0.66, respectively. Sensitivity analysis indicated that most ecological relationships between chlorophyll a and input environmental variables in 0-and 7-days-ahead models were reasonable. In the 0-day model, Secchi depth, water temperature, and dissolved silicate were the most important factors influencing the daily dynamics of chlorophyll a. And in 7-days-ahead predicting model, chlorophyll a was sensitive to most environmental variables except water level, DO, and NH3N.

Variables affecting melanoidins removal from molasses wastewater by coagulation/flocculation

Coagulation/flocculation process was applied in the polishing treatment of molasses wastewater on a bench-scale. Important operating variables, including coagulant type and dosage, solution pH, rapid mixing conditions as well as the type and dosage of polyeletrolytes were investigated based on the maximum removal efficiencies of chemical oxygen demand (COD) and color, residual turbidity and settling characteristics of flocs. HPSEC was utilized to evaluate the removal of molecular weight fractions of melanoidins-dominated organic compounds. Experimental results indicate that ferric chloride was the most effective among the conventional coagulants, achieving 89% COD and 98% color eliminations; while aluminum sulfate was the least effective, giving COD and color reductions of 66% and 86%, respectively. In addition to metal cations, counter-ions exert significant influence on the coagulation performance since Cl--based metal salts attained better removal efficiency than SO42--based ones at the optimal coagulant dosages. Coagulation of molasses effluent is a highly pH-dependent process, with better removal efficiency achieved at lower pH levels. Rapid mixing intensity, rather than rapid mixing time, has relatively strong influence on the settling characteristics of flocs formed. Lowering mixing intensity resulted in increasing settling rate but the accumulation of floating flocs. When used as coagulant aids, synthetic polyelectrolytes showed little effects on the improvement in organic removal. On the other hand, cationic polyacrylamide was observed to substantially enhance the settleability of flocs as compared to anionic polyacrylamide. The effects of rapid mixing conditions and polymer flocculants on the coagulation performance were discussed. (C) 2009 Elsevier B.V. All rights reserved.