The requirements of a feasible plastic packaging material for cultured dairy products

The objective of this Master´s Thesis was to conduct a wide scale preliminary survey regarding the package requirements of a cultured dairy package, and to compare the currently used material polystyrene to other suitable packaging materials. Polystyrene has a long history of use in dairy cups, but in recent years its price has increased significantly compared to other common packaging materials. The overall environmental effects of a package and a package material are today a part of designing a sustainable product life cycle. In addition, in certain contexts there has been discussion of the risks posed by styrene polymer for the environment and for humans. These risks are also discussed in this thesis. Polystyrene (PS) is still the most widely used material in dairy cups. In recent years, polypropylene (PP) cups have appeared in increasing numbers on market shelves. This study focuses on the differences of the suitable polymers and examines the suitability of alternative “suitable” polymers with regards to dairy packaging. Aside from focusing on the cup manufacturer, this thesis also examines its subject matter from the viewpoint of the dairy customer, as well as observing the concrete implications of material changes in the overall value chain. It was known in advance that material permeability would be one of the determining factors and that gas transmission testing would be a significant part of the thesis. Mechanical tests were the second part of the testing process, providing information regarding package strength and protectiveness during the package’s life cycle. Production efficiency, along with uninterrupted stable production, was another important factor that was taken into consideration. These two issues are sometimes neglected in similar contexts due to their self-evident nature. In addition, materials used in production may have a surprising significance to the production and efficiency. Consistent high quality is also partly based on material selection. All of the aforementioned factors have been documented and the results have been analyzed by the development team at Coveris Rigid Finland. Coveris is now calculating the total finance effects and capacities should the material changes be implemented in practice. There are many factors in favor of switching to polypropylene at the moment. The overall production costs, as well as the environmental effects of resin production are the primary influences for said switch from the converters’ perspective.

Energy and raw material consumption analysis of powder bed fusion: case study: CNC machining and laser additive manufacturing

Laser additive manufacturing (LAM), known also as 3D printing, is a powder bed fusion (PBF) type of additive manufacturing (AM) technology used to manufacture metal parts layer by layer by assist of laser beam. The development of the technology from building just prototype parts to functional parts is due to design flexibility. And also possibility to manufacture tailored and optimised components in terms of performance and strength to weight ratio of final parts. The study of energy and raw material consumption in LAM is essential as it might facilitate the adoption and usage of the technique in manufacturing industries. The objective this thesis was find the impact of LAM on environmental and economic aspects and to conduct life cycle inventory of CNC machining and LAM in terms of energy and raw material consumption at production phases. Literature overview in this thesis include sustainability issues in manufacturing industries with focus on environmental and economic aspects. Also life cycle assessment and its applicability in manufacturing industry were studied. UPLCI-CO2PE! Initiative was identified as mostly applied exiting methodology to conduct LCI analysis in discrete manufacturing process like LAM. Many of the reviewed literature had focused to PBF of polymeric material and only few had considered metallic materials. The studies that had included metallic materials had only measured input and output energy or materials of the process and compared to different AM systems without comparing to any competitive process. Neither did any include effect of process variation when building metallic parts with LAM. Experimental testing were carried out to make dissimilar samples with CNC machining and LAM in this thesis. Test samples were designed to include part complexity and weight reductions. PUMA 2500Y lathe machine was used in the CNC machining whereas a modified research machine representing EOSINT M-series was used for the LAM. The raw material used for making the test pieces were stainless steel 316L bar (CNC machined parts) and stainless steel 316L powder (LAM built parts). An analysis of power, time, and the energy consumed in each of the manufacturing processes on production phase showed that LAM utilises more energy than CNC machining. The high energy consumption was as result of duration of production. Energy consumption profiles in CNC machining showed fluctuations with high and low power ranges. LAM energy usage within specific mode (standby, heating, process, sawing) remained relatively constant through the production. CNC machining was limited in terms of manufacturing freedom as it was not possible to manufacture all the designed sample by machining. And the one which was possible was aided with large amount of material removed as waste. Planning phase in LAM was shorter than in CNC machining as the latter required many preparation steps. Specific energy consumption (SEC) were estimated in LAM based on the practical results and assumed platform utilisation. The estimated platform utilisation showed SEC could reduce when more parts were placed in one build than it was in with the empirical results in this thesis (six parts).

Examining life-course influences on chronic disease: the Ribeirão Preto and São Luís birth cohort studies (Brazil)

More than any other low- and middle-income country, Brazil has the longest research tradition of establishing, maintaining and exploiting birth cohort studies. This research pedigree is highlighted in the present issue of the Brazilian Journal of Medical and Biological Research, which contains a series of twelve papers from the Ribeirão Preto and São Luis birth cohort studies from the Southeast and Northeast of Brazil, respectively. The topics covered in this raft of reports vary and include predictors of perinatal health and maternal risk factors, early life determinants of cardiovascular risk factors in childhood and adolescence, use of health services, and a description of dietary characteristics of young adults, amongst other topics. There is also a guide to the background, objectives, sampling and protocols employed across these studies, which, together with similar pieces published in past issues of the Brazilian Journal, serve as a very useful starting point, particularly for potential collaborators. In the fervent hope that further follow-up of these cohorts will take place - we provide our own justification for cohort maintenance and extension in this issue - future data collection could include: genetic material, atherosclerosis, ascertained, for instance, by intima-media thickness, and IQ testing in children - scores from which are emerging as potentially important predictors of adult health outcomes up to six decades later.

Can course format influence the performance of students in an advanced cardiac life support (ACLS) program?

Advanced cardiac life support (ACLS) is a problem-based course that employs simulation techniques to teach the standard management techniques of cardiovascular emergencies. Its structure is periodically revised according to new versions of the American Heart Association guidelines. Since it was introduced in Brazil in 1996, the ACLS has been through two conceptual and structural changes. Detailed documented reports on the effect of these changes on student performance are limited. The objective of the present study was to evaluate the effect of conceptual and structural changes of the course on student ACLS performance at a Brazilian training center. This was a retrospective study of 3266 students divided into two groups according to the teaching model: Model 1 (N = 1181; 1999-2003) and Model 2 (N = 2085; 2003-2007). Model 2 increased practical skill activities to 75% of the total versus 60% in Model 1. Furthermore, the teaching material provided to the students before the course was more objective than that used for Model 1. Scores greater than 85% in the theoretical evaluation and approval in the evaluation of practice by the instructor were considered to be a positive outcome. Multiple logistic regression was used to adjust for potential confounders (specialty, residency, study time, opportunity to enhance practical skills during the course and location where the course was given). Compared to Model 1, Model 2 presented odds ratios (OR) indicating better performance in the theoretical (OR = 1.34; 95%CI = 1.10-1.64), practical (OR = 1.19; 95%CI = 0.90-1.57), and combined (OR = 1.38; 95%CI = 1.13-1.68) outcomes. Increasing the time devoted to practical skills did not improve the performance of ACLS students.

Monolithic zirconium dioxide as a full contour restorative material: With special emphasis on the optical and mechanical properties

Full contour monolithic zirconia restorations have shown an increased popularity in the dental field over the recent years, owing to its mechanical and acceptable optical properties. However, many features of the restoration are yet to be researched and supported by clinical studies to confirm its place among the other indirect restorative materials This series of in vitro studies aimed at evaluating and comparing the optical and mechanical properties, light cure irradiance, and cement polymerization of multiple monolithic zirconia material at variable thicknesses, environments, treatments, and stabilization. Five different monolithic zirconia materials, four of which were partially stabilized and one fully stabilized were investigated. The optical properties in terms of surface gloss, translucency parameter, and contrast ratio were determined via a reflection spectrophotometer at variable thicknesses, coloring, sintering method, and after immersion in an acidic environment. Light cure irradiance and radiant exposure were quantified through the specimens at variable thicknesses and the degree of conversion of two dual-cure cements was determined via Fourier Transform Infrared spectroscopy. Bi-axial flexural strength was evaluated to compare between the partially and fully stabilized zirconia prepared using different coloring and sintering methods. Surface characterization was performed using a scanning electron microscope and a spinning disk confocal microscope. The surface gloss and translucency of the zirconia investigated were brand and thickness dependent with the translucency values decreasing as the thickness increased. Staining decreased the translucency of the zirconia and enhanced surface gloss as well as the flexural strength of the fully stabilized zirconia but had no effect on partially stabilized zirconia. Immersion in a corrosive acid increased surface gloss and decreased the translucency of some zirconia brands. Zirconia thickness was inversely related to the amount of light irradiance, radiant exposure, and degree of monomer conversion. Type of sintering furnace had no effect on the optical and mechanical properties of zirconia. Monolithic zirconia maybe classified as a semi-translucent material that is well influenced by the thickness, limiting its use in the esthetic zones. Conventional acid-base reaction, autopolymerizing and dual-cure cements are recommended for its cementation. Its desirable mechanical properties give it a high potential as a restoration for posterior teeth. However, close monitoring with controlled clinical studies must be determined before any definite clinical recommendations can be drawn.

Life-related negative customer emotions in real estate agent encounters

The goal of this study was to explore how do customers’ life-related negative emotions affect real estate business. This was divided into two research questions: 1. What life-related negative emotions can be recognised in real estate customer encounters? 2. How do the recognised emotions affect customer encounters and the realtor’s work? 3. How can the realtor take the emotions into account in customer service? The theoretical background consists of two main lines of study: emotions and customer encounters. A wide literary review on emotions research was conducted from a cognitive psychology point of view, focusing on negative emotions. Emotions research was then combined into the field of customer encounters. Qualitative study was chosen as the methodological basis of the study. Empirical material of this study was collected through in-depth interviews with 13 successful Finnish real estate agents. Narrative research was used as a method for the study. Four life-related emotion categories were recognized in real estate customer encounters: sadness, anger, anxiety and shame. These emotions rose from issues varying from death of a close one to divorce and from major changes in life stages to deep emotional attachment to an old home. The study also found that these incidental negative emotions do affect customer encounters and realtors’ work. The emotions affected the decision making of customers and sometimes overshadowed reason. Some emotions made the customer passive and slow to make any decisions, while others made their decision making fast and hasty. Even though the incidental emotions might not have had anything to do with the real estate deal, they could affect the outcome of the customer encounter and the whole real estate deal. Interestingly enough, the study found that not all successful real estate agents knowingly serve customers in an emotional level. The study does, however, suggest that in fact it may be an ethical decision of the customer server to take into account the emotional state of the customer. Attending to the emotional side of customers does not only increase pleasantness of the customer encounter, but may improve and balance customer decision making and prevent hasty decisions possibly leading to improved customer satisfaction. This study also gave practical managerial implications to customer service providers on how negative incidental emotions can be attended to in a customer encounter. This study could be useful not only to real estate agents, but also in other types of customer service, especially with vulnerable populations or other types of home-related business.

Estelle Cuffe Hawley fonds, 1852-1999, n.d.

Estelle Cuffe Hawley (1894-1995) was an educator, businesswoman and politician, who became the first woman alderman on the St. Catharines City Council. She began her career as a teacher in Peterborough in 1913, and later taught in St. Catharines at Connaught School and St. Paul’s Ward School, where she served as Principal for six years. In 1928-29, she worked as an exchange teacher in Edmonton, Alberta. This would be Estelle’s last year in the teaching profession. She moved back to St. Catharines in 1930 and began a career in business, as an employee of Sun Life Assurance Co. She remained in this profession until around 1952. It was during this period that she became very active in the community and local politics. In 1934 she was elected to the St. Catharines Board of Education, where she advocated for the improvement of teachers’ salaries, the introduction of nursing services in schools, and the inclusion of music in the curriculum. She served as a member of the school board until 1937. The following year, she became the first woman elected to the St. Catharines City Council. As an alderman, she worked to improve the community's social welfare services, serving consecutively as chairman of all committees. She established comprehensive health services (including medical, dental and nursing), in the public, separate and secondary schools of St. Catharines, the first program of its kind in Canada. She was also instrumental in establishing minimum housing standards and engaging the public in local government by arranging a series of lectures by city officials. She remained a member of City Council until 1943. The following year she campaigned unsuccessfully for the mayoralty. In 1953 she married Hubert Hawley and moved to Orillia. She continued to remain active in the community, serving as President of the Ontario Recreation Association from 1950-1953, and editor of their Bulletin from 1955-1961. During the 1960s, she worked with various groups, including the Voice of Women, the Mental Health Association and the Freedom from Hunger Campaign. In addition to this work, Estelle wrote poetry and short stories, some of which were published in the Peterborough Review, the Globe and Mail and the Canadian Churchman. Some of her short stories (often about her childhood experiences) were broadcast on the CBC, as well as her experiences as a Town Councillor (under the pseudonym Rebecca Johnson in 1961). She also broadcast a segment that was part of a series called “Winning the Peace” in April 1944. Estelle was a sought-after public speaker, speaking on topics such as peace, democracy, citizenship, education, and women’s rights. In 1976, Brock University conferred an honorary Doctor of Law degree to Estelle for her leadership as an educator, businesswoman and a stateswoman. Her husband Hubert died that same year, and Estelle subsequently moved to Mississauga. With the assistance of an Ontario Heritage Foundation grant, she began work on her memoir. She later moved back to Orillia and died there in 1995, at the age of 101.

A randomized controlled trial evaluating the quality of life and the sense of coherence in seniors wearing complete conventional dentures or mandibular two-implant overdentures

La supériorité des prothèses mandibulaires retenues par deux implants (IODs) sur les prothèses conventionnelles (CDs) nécessitent d’être éclaircies notamment en rapport à leur influence sur la qualité de vie reliée à la santé bucco-dentaire (OHRQoL) ainsi que sur la stabilité de cet effet de traitement. De plus, l’influence des facteurs psychologiques, tel que le sens de cohérence (SOC), sur l’effet de traitement reste encore inconnue. Le but de cette étude est de déterminer l’amplitude de l’influence du port des IODs et des CDs sur l’OHRQoL et d’évaluer la stabilité de l’effet de traitement dans le temps, tout en prenant en considération le niveau du SOC. MÉTHODOLOGIE: Des participants édentés (n=172, âge moyen 71, SD = 4.5) ayant reçu des CDs ou des IODs ont été suivis sur une période de deux ans. L’OHRQoL a été évaluée à l’aide du questionnaire « Oral Health Impact Profile (OHIP -20) » et ce avant le traitement et à chacun des deux suivis. Le SOC a été évalué à l’aide du questionnaire « The Orientation to Life (SOC -13) » à chacun des deux suivis. Des analyses statistiques ont été effectuées pour évaluer les différences intra et entre groupes (analyses statistiques descriptives, bivariées et multivariées). RÉSULTATS: Une amélioration statistiquement significative de l’OHRQoL entre les statuts avant et après traitement a été notée dans les deux groupes (Wilks’s Lambda = 0.473, F (1,151) = 157.31, p < 0.0001). L’amplitude de l’effet du traitement IOD est 1.5 fois plus grande que celle du traitement CD. Ces résultats ont été stables pendant les deux années d’étude et ils n’ont pas été influencés par le SOC. CONCLUSION: Le traitement IOD amène une meilleure OHRQoL à long terme en comparaison avec le traitement CD et ce sans influence du niveau du SOC. Ces résultats sont cliniquement significatifs et confirment la supériorité des IODs sur les CDs.

Intertemporal Material Deprivation

Individual well-being is multidimensional and various aspects of the quality of life need to be jointly considered in its measurement. The axiomatic literature on the subject has proposed many indices of multidimensional poverty and deprivation and explored the properties that are at the basis of these measures. The purpose of this chapter is to add intertemporal considerations to the analysis of material deprivation. We employ the EU-SILC panel data set, which includes information on different aspects of well-being over time. EU countries are compared based on measures that take this additional intertemporal information into consideration. Journal of Economic Literature Classi cation No.: D63.

Effect of Concentration of DYE on the Storage Life of Plane Wave Gratings on Photopolymer Film

Holographic grating with good storage life in poly(vinyl alcohol) based photopolymer film, prepared by gravity settling method, with reduced concentration of the dye was found to give good diffraction efficiency without crosslinking. The material was found to show good diffraction efficiency and sensitivity (75% diffraction efficiency at exposure energy of 80 mJ/cm2). The shelf life of the photopolymer solution could be improved by storage at a temperature 4 C in refrigerator

That's my life. 'Esta es mi vida'.

Unidad didáctica del área de lengua inglesa. El objetivo principal es desarrollar la competencia comunicativa en todos sus aspectos a través de tareas variadas que fomenten la competencia lingüística. Se proponen actividades que giran en torno al tema de las actividades cotidianas, los deportes y las aficiones. Se estructura en dos bloques: uno, referente al material del profesor con orientaciones para el desarrollo; y el otro, al del alumno, con actividades.

Networked Life: Module CIS 112, University of Pennsylvania, Spring 2008

What kind of science is appropriate for understanding the Facebook? How does Google find what you're looking for... ...and exactly how do they make money doing so? What structural properties might we expect any social network to have? How does your position in an economic network (dis)advantage you? How are individual and collective behavior related in complex networks? What might we mean by the economics of spam? What do game theory and the Paris subway have to do with Internet routing? What's going on in the pictures to the left and right? Networked Life looks at how our world is connected -- socially, economically, strategically and technologically -- and why it matters. The answers to the questions above are related. They have been the subject of a fascinating intersection of disciplines including computer science, physics, psychology, mathematics, economics and finance. Researchers from these areas all strive to quantify and explain the growing complexity and connectivity of the world around us, and they have begun to develop a rich new science along the way. Networked Life will explore recent scientific efforts to explain social, economic and technological structures -- and the way these structures interact -- on many different scales, from the behavior of individuals or small groups to that of complex networks such as the Internet and the global economy. This course covers computer science topics and other material that is mathematical, but all material will be presented in a way that is accessible to an educated audience with or without a strong technical background. The course is open to all majors and all levels, and is taught accordingly. There will be ample opportunities for those of a quantitative bent to dig deeper into the topics we examine. The majority of the course is grounded in scientific and mathematical findings of the past two decades or less.

Sources of life.

El presente proyecto está basado en los siguientes centros de interés: I. La energía y el cuerpo humano. II.Fuentes de energía. III.Incidencia de las aplicaciones técnicas de la energía en el medio ambiente. Como objetivo principal está la elaboración del currículo adaptado a las nuevas realidades de la enseñanza, incluyendo las innovaciones metodológicas, tecnológicas y didácticas más avanzadas. Se pretende, con este proyecto, que no se circunscriba estrictamente al área de lenguas extranjeras, sino que se vincule a otros proyectos de centro. Se eligió el tema 'Sources of life' por el interés que suscitan temas tan actuales como los medioambientales y que están recogidos en los diseños curriculares de las distintas áreas de la Educación Secundaria Obligatoria (ESO). Aplicado a tres institutos de bachillerato de Gran Canaria, no especifica el número de alumnos a los que afectó la experiencia, cuyo nivel es 1 de BUP. A través de reuniones periódicas, se elaboró el material necesario para la confección del currículo. Este material se aplicaba en el aula a través de 'project worker' y centros de interés para desarrollar los contenidos del mismo. No constan resultados.

La relación entre la calidad de la enseñanza y la mala práctica odontológica: relato de caso clínico

Las actividades desarrolladas en el área de la salud son de gran importancia, pues tienen como finalidad preservar la vida de los individuos y para eso deben ser desempeñadas por personas habilitadas. El aumento del número de facultades de Odontología, la disminución en la calidad de la enseñanza y el mayor ingreso de alumnos con baja capacidad para ejercer la profesión son hechos que traen consecuencias desastrosas para la sociedad. Estos hechos también se reflejan en el desempeño moral, ético y técnico-científico del profesional. El objetivo de ese relato de caso clínico es enseñar que, aunque hay una considerable oferta de instituciones de enseñanza, existe un desconocimiento científico y de técnicas adecuadas por parte de los cirujanos dentistas graduados. La paciente MSL, 17 años, sexo femenino, compareció al consultorio odontológico usando un molde tipo Vernis, sujeto al arco inferior. Tras evaluación clínica, se observó la utilización de un material incorrecto para la toma de impresión, siendo imposible su retiro con el método convencional. La planificación para su retiro se hizo por medio de seccionamiento. De esta manera, la consecuencia de la falta de conocimiento en el uso de materiales para la impresión causó gran trastorno a la paciente. Se puede concluir que el índice de impericia está relacionado directamente con la formación profesional, evidenciando la importancia de la enseñanza odontológica de calidad para una práctica clínica responsable.