La elite urbana de Santiago de Guatemala (1632-1775): estudios de redes

Resumen Estudia la elite urbana de Santiago de Guatemala entre 1632 y 1775 utilizando la familia como unidad básica para el análisis histórico y el parentesco como paradigma para interpretar las relaciones sociales. Abstract This article focuses on the urban elite of Santiago de Guatemala between 1632 and 1775, using the family as the basic unit of historical analysis and using kinship as a paradigm for the interpretation.

Urothelial Carcinogen Resistance Driven By Stronger Toll-like Receptor 2 (tlr2) And Uroplakin Iii (up Iii) Defense Mechanisms: A New Model.

The objective of the study was to illustrate the applicability and significance of the novel Lewis urothelial cancer model compared to the classic Fisher 344. Fischer 344 and Lewis females rats, 7 weeks old, were intravesical instilled N-methyl-N-nitrosourea 1.5 mg/kg every other week for a total of four doses. After 15 weeks, animals were sacrificed and bladders analyzed: histopathology (tumor grade and stage), immunohistochemistry (apoptotic and proliferative indices) and blotting (Toll-like receptor 2-TLR2, Uroplakin III-UP III and C-Myc). Control groups received placebo. There were macroscopic neoplastic lesions in 20 % of Lewis strain and 70 % of Fischer 344 strain. Lewis showed hyperplasia in 50 % of animals, normal bladders in 50 %. All Fischer 344 had lesions, 20 % papillary hyperplasia, 30 % dysplasia, 40 % neoplasia and 10 % squamous metaplasia. Proliferative and apoptotic indices were significantly lower in the Lewis strain (p < 0.01). The TLR2 and UP III protein levels were significantly higher in Lewis compared to Fischer 344 strain (70.8 and 46.5 % vs. 49.5 and 16.9 %, respectively). In contrast, C-Myc protein levels were significantly higher in Fischer 344 (22.5 %) compared to Lewis strain (13.7 %). The innovative Lewis carcinogen resistance urothelial model represents a new strategy for translational research. Preservation of TLR2 and UP III defense mechanisms might drive diverse urothelial phenotypes during carcinogenesis in differently susceptible individuals.

A unified model of flames as gasdynamic discontinuities

Viewed on a hydrodynamic scale, flames in experiments are often thin so that they may be described as gasdynamic discontinuities separating the dense cold fresh mixture from the light hot burned products. The original model of a flame as a gasdynamic discontinuity was due to Darrieus and to Landau. In addition to the fluid dynamical equations, the model consists of a flame speed relation describing the evolution of the discontinuity surface, and jump conditions across the surface which relate the fluid variables on the two sides of the surface. The Darrieus-Landau model predicts, in contrast to observations, that a uniformly propagating planar flame is absolutely unstable and that the strength of the instability grows with increasing perturbation wavenumber so that there is no high-wavenumber cutoff of the instability. The model was modified by Markstein to exhibit a high-wavenumber cutoff if a phenomenological constant in the model has an appropriate sign. Both models are postulated, rather than derived from first principles, and both ignore the flame structure, which depends on chemical kinetics and transport processes within the flame. At present, there are two models which have been derived, rather than postulated, and which are valid in two non-overlapping regions of parameter space. Sivashinsky derived a generalization of the Darrieus-Landau model which is valid for Lewis numbers (ratio of thermal diffusivity to mass diffusivity of the deficient reaction component) bounded away from unity. Matalon & Matkowsky derived a model valid for Lewis numbers close to unity. Each model has its own advantages and disadvantages. Under appropriate conditions the Matalon-Matkowsky model exhibits a high-wavenumber cutoff of the Darrieus-Landau instability. However, since the Lewis numbers considered lie too close to unity, the Matalon-Matkowsky model does not capture the pulsating instability. The Sivashinsky model does capture the pulsating instability, but does not exhibit its high-wavenumber cutoff. In this paper, we derive a model consisting of a new flame speed relation and new jump conditions, which is valid for arbitrary Lewis numbers. It captures the pulsating instability and exhibits the high-wavenumber cutoff of all instabilities. The flame speed relation includes the effect of short wavelengths, not previously considered, which leads to stabilizing transverse surface diffusion terms.

Rove beetles of medical importance in Brazil (Coleoptera, Staphylinidae, Paederinae)

Rove beetles of medical importance in Brazil (Coleoptera, Staphylinidae, Paederinae). The rove beetles of the genus Paederus Fabricius, 1775 are the most important group within Coleoptera causing dermatitis around the world. The medical importance of Paederus depends on its toxic hemolymph released when these beetles are crushed on human skin. The effects are mainly dermatitis linearis and some sporadic cases of conjunctivitis. In Brazil seven species of Paederus are known to cause dermatitis: P. amazonicus Sharp, 1876, P. brasiliensis Erichson, 1840, P. columbinus Laporte, 1835, P. ferus Erichson, 1840, P. mutans Sharp, 1876, P. protensus Sharp, 1876 stat. rev., and Paederus rutilicornis Erichson, 1840. Paederus mutans and P. protensus are for the first time recorded as of medical importance, whereas the record of P. rutilicornis in Brazil is doubtful. All seven species are redescribed and a dichotomous key is provided. The geographic distributions of all species are documented. The results provided here include the most recent and relevant taxonomic revision of Paederus of the Neotropical region, the first identification key for Brazilian species and the increase of recorded species of medical importance in the world.

Universales estructurales

The work presents the concept of a structural universal and the criticisms that have been leveled against it. A structural universal is a property had by an individual due to the nature of its proper parts and due to the relations obtaining between those parts. Mellor has argued that there is no reason to accept such universal in addition to the basic universals that compose them. David Lewis has argued -on the other hand- that it has not been satisfactorily explained how universals are composed by other universals. The composition by which a structural universal is given cannot be a set-theoretical construction or a mereological sum. Several proposals to explain the nature of structural universals are discussed. Finally it is argued that a structural universal should be understood as a complexion of higher-order universals.

Methyl and ethyl chloride synthesis in microreactors

Methyl chloride is an important chemical intermediate with a variety of applications. It is produced today in large units and shipped to the endusers. Most of the derived products are harmless, as silicones, butyl rubber and methyl cellulose. However, methyl chloride is highly toxic and flammable. On-site production in the required quantities is desirable to reduce the risks involved in transportation and storage. Ethyl chloride is a smaller-scale chemical intermediate that is mainly used in the production of cellulose derivatives. Thus, the combination of onsite production of methyl and ethyl chloride is attractive for the cellulose processing industry, e.g. current and future biorefineries. Both alkyl chlorides can be produced by hydrochlorination of the corresponding alcohol, ethanol or methanol. Microreactors are attractive for the on-site production as the reactions are very fast and involve toxic chemicals. In microreactors, the diffusion limitations can be suppressed and the process safety can be improved. The modular setup of microreactors is flexible to adjust the production capacity as needed. Although methyl and ethyl chloride are important chemical intermediates, the literature available on potential catalysts and reaction kinetics is limited. Thus the thesis includes an extensive catalyst screening and characterization, along with kinetic studies and engineering the hydrochlorination process in microreactors. A range of zeolite and alumina based catalysts, neat and impregnated with ZnCl2, were screened for the methanol hydrochlorination. The influence of zinc loading, support, zinc precursor and pH was investigated. The catalysts were characterized with FTIR, TEM, XPS, nitrogen physisorption, XRD and EDX to identify the relationship between the catalyst characteristics and the activity and selectivity in the methyl chloride synthesis. The acidic properties of the catalyst were strongly influenced upon the ZnCl2 modification. In both cases, alumina and zeolite supports, zinc reacted to a certain amount with specific surface sites, which resulted in a decrease of strong and medium Brønsted and Lewis acid sites and the formation of zinc-based weak Lewis acid sites. The latter are highly active and selective in methanol hydrochlorination. Along with the molecular zinc sites, bulk zinc species are present on the support material. Zinc modified zeolite catalysts exhibited the highest activity also at low temperatures (ca 200 °C), however, showing deactivation with time-onstream. Zn/H-ZSM-5 zeolite catalysts had a higher stability than ZnCl2 modified H-Beta and they could be regenerated by burning the coke in air at 400 °C. Neat alumina and zinc modified alumina catalysts were active and selective at 300 °C and higher temperatures. However, zeolite catalysts can be suitable for methyl chloride synthesis at lower temperatures, i.e. 200 °C. Neat γ-alumina was found to be the most stable catalyst when coated in a microreactor channel and it was thus used as the catalyst for systematic kinetic studies in the microreactor. A binder-free and reproducible catalyst coating technique was developed. The uniformity, thickness and stability of the coatings were extensively characterized by SEM, confocal microscopy and EDX analysis. A stable coating could be obtained by thermally pretreating the microreactor platelets and ball milling the alumina to obtain a small particle size. Slurry aging and slow drying improved the coating uniformity. Methyl chloride synthesis from methanol and hydrochloric acid was performed in an alumina-coated microreactor. Conversions from 4% to 83% were achieved in the investigated temperature range of 280-340 °C. This demonstrated that the reaction is fast enough to be successfully performed in a microreactor system. The performance of the microreactor was compared with a tubular fixed bed reactor. The results obtained with both reactors were comparable, but the microreactor allows a rapid catalytic screening with low consumption of chemicals. As a complete conversion of methanol could not be reached in a single microreactor, a second microreactor was coupled in series. A maximum conversion of 97.6 % and a selectivity of 98.8 % were reached at 340°C, which is close to the calculated values at a thermodynamic equilibrium. A kinetic model based on kinetic experiments and thermodynamic calculations was developed. The model was based on a Langmuir Hinshelwood-type mechanism and a plug flow model for the microreactor. The influence of the reactant adsorption on the catalyst surface was investigated by performing transient experiments and comparing different kinetic models. The obtained activation energy for methyl chloride was ca. two fold higher than the previously published, indicating diffusion limitations in the previous studies. A detailed modeling of the diffusion in the porous catalyst layer revealed that severe diffusion limitations occur starting from catalyst coating thicknesses of 50 μm. At a catalyst coating thickness of ca 15 μm as in the microreactor, the conditions of intrinsic kinetics prevail. Ethanol hydrochlorination was performed successfully in the microreactor system. The reaction temperature was 240-340°C. An almost complete conversion of ethanol was achieved at 340°C. The product distribution was broader than for methanol hydrochlorination. Ethylene, diethyl ether and acetaldehyde were detected as by-products, ethylene being the most dominant by-product. A kinetic model including a thorough thermodynamic analysis was developed and the influence of adsorbed HCl on the reaction rate of ethanol dehydration reactions was demonstrated. The separation of methyl chloride using condensers was investigated. The proposed microreactor-condenser concept enables the production of methyl chloride with a high purity of 99%.

Experimental and Computational Studies on Copper and Hydrobenzoin Derivatives in Catalytic Asymmetric Reactions

The use of theory to understand and facilitate catalytic enantioselective organic transformations involving copper and hydrobenzoin derivatives is reported. Section A details the use of theory to predict, facilitate, and understand a copper promoted amino oxygenation reaction reported by Chemler et al. Using Density Functional Theory (DFT), employing the hybrid B3LYP functional and a LanL2DZ/6-31G(d) basis set, the mechanistic details were studied on a N-tosyl-o-allylaniline and a [alpha]-methyl-[gamma]-alkenyl sulfonamide substrate. The results suggest the N-C bond formation proceeds via a cisaminocupration, and not through a radical-type mechanism. Additionally, the origin of diastereoselection observed with [alpha]-methyl-[gamma]-alkenyl sulfonamide arises from avoidance of unfavourable steric interactions between the methyl substituent and the N -protecting group. Section B details the computationally guided, experimental investigation of two hydrobenzoin derivatives as ligands/ catalysts, as well as the attempted synthesis of a third hydrobenzoin derivative. The bis-boronic acid derived from hydrobenzoin was successful as a Lewis acid catalyst in the Bignielli reaction and the Conia ene reaction, but provided only racemic products. The chiral diol derived from hydrobenzoin successfully increased the rate of the addition of diethyl zinc to benzaldehyde in the presence of titanium tetraisopropoxide, however poor enantioinduction was obseverved. Notably, the observed reactivity was successfully predicted by theoretical calculations.

Indenture between Jacob Canniff and Susan Canniff

Indenture (vellum) of bargain and sale between Jacob Canniff and Susan Canniff of Niagara to Lewis Clement of Niagara, the south half of Lot 69 Town of Niagara - Instrument no. 7072, June 21, 1827.

Synthèse stéréosélective de motifs polypropionates via la chimie des radicaux : application à l'élaboration de l'hémisphère ouest de la narasine

Cet ouvrage traite principalement de la synthèse de motifs polypropionates de type stéréopentade ainsi qu’une application à la synthèse d’une molécule naturelle possèdant des propriétés biologiques. La stratégie envisagée pour l’élaboration de ces motifs récurrents dans plusieurs structures d’origine naturelle fait appel à la chimie des radicaux. Cette thèse se divise en différents chapitres dans lesquels la versatilité de la méthodologie développée sera démontrée. En premier lieu, il sera question de présenter l’importance de la synthèse de motifs polypropionates. Le domaine couvert par la chimie de ces molécules complexes hautement fonctionnalisées a contribué énormément à l’avancement de nos connaissances en synthèse organique, particulièrement dans le contexte des réactions impliquant des molécules acyliques. Une brève description des méthodes connues est présentée afin de saisir l’étendue des défis restants pour construire efficacement tous les isomères possibles des polypropionates de type stéréopentade. La stratégie proposée est basée sur une approche contrôlée entièrement par le substrat. Ce contrôle s’appuie sur le choix judicieux de l’acide de Lewis activant les deux réactions impliquées, soit la réaction de Mukaiyama et le transfert d’hydrogène. La seconde section de cette thèse concerne principalement le développement d’une réaction de Mukaiyama impliquant un éther d’énol silylé portant un lien pouvant être homolytiquement brisé dans la réaction suivante et un aldéhyde de type propionate. Le contrôle de l’aldolisation provient de la nature de l’acide de Lewis. Une espèce monodentate (BF3·OEt2) génère une relation 3,4-syn selon le modèle dit Felkin-Anh tandis que les acides de Lewis bidentates mènent à la relation 3,4-anti via un état de transition définit comme Cram-chélate. Une optimisation des conditions réactionnelles en variant l’acidité et la stoechiométrie de l’acide de Lewis de titane a permis de construire diastéréosélectivement le produit de Mukaiyama ayant une relation 3,4-anti. En outre, la nature des complexes impliqués dans ces réactions a été élucidée par des études RMN 13C à basse température. Une fois les précurseurs radicalaires synthétisés, notre méthodologie de réduction par transfert d’hydrogène contrôlée également par les acides de Lewis s’avère très efficace. Les acides de Lewis dérivés d’aluminium mènent sélectivement à la relation 2,3-syn selon un contrôle endocyclique tandis que les acides de Lewis de bore permettent la création des relations 2,3-anti en se basant sur une stabilisation par les divers facteurs de contrôle de molécules acycliques. Cette stratégie novatrice nous a ainsi permis de construire efficacement les 16 diastéréoisomères possibles. Le chapitre suivant concerne l’application de cette méthodologie à la synthèse de l’hémisphère ouest de la salinomycine et de la narasine. Plusieurs défis synthétiques ont été relevés à cette occasion par la présence de nombreux centres stéréogènes contigus. Nous avons réalisé que la relation stéréochimique 2,3-anti de la salinomycine n’est pas accessible sélectivement par la chimie des radicaux via l’effet exocyclique. Des études ont été entreprises afin de comprendre cette perte de sélectivité. Les conclusions suggèrent que les substituants sur le cycle imposent un biais conformationnel conduisant à des faibles sélectivités. Une alternative utilisant un réactif de crotylsilane chiral a été développée pour arriver à la molécule cible. Cette situation est différente dans le cas de la narasine où la présence du méthyle sur le carbone en position β du radical bloque efficacement l’approche d’une des faces d’attaque par l’hydrure. Des sélectivités impressionnantes nous ont permis de construire le fragment C1-C9 de la narasine de manière expéditive et efficace. Finalement, l’élongation sélective utilisant à nouveau la séquence d’aldolisation de Mukaiyama/réduction radicalaire suivie d’un couplage de type aldol stéréosélectif conduit au fragment C1-C17 de la narasine (hémisphère ouest)en 19 étapes avec un rendement global de l’ordre de 7 %. En dernier lieu, nous nous sommes penchés sur la réactivité des α-bromo-β- alkoxycétones lors de transfert d’hydrogène. Nous avons découvert que la chimie de ces derniers pourrait s’avérer utile dans le contexte de la synthèse de motifs complexes polypropionates. La présence d’un centre stéréogène de l’autre coté de la cétone semble avoir un impact sur la sélectivité.

Identification de QTL à pression artérielle dans le chromosome 18 du rat et analyse des gènes candidats Adrb2 et Nedd4l associés à l’hypertension essentielle

L’hypertension constitue un facteur majeur de risque de maladies cardiovasculaires et touche à un pourcentage important de la population humaine. Il s’agit d’une maladie complexe étant donné son caractère multifactoriel. La régulation de la pression artérielle (PA) est sous contrôle de plusieurs gènes, appelés loci pour traits quantitatifs ou QTL, et elle est le résultat de leur interaction. Étant donné que la PA est un trait quantitatif sous contrôle de plusieurs composantes comme les facteurs génétiques et environnementaux, l’étude de l’hypertension est limitée chez les populations humaines. Ainsi la stratégie principale pour l’étude de cette maladie est l’identification de QTL à PA chez des souches congéniques de rat construites à partir des lignées hyper- et normotendues; à savoir les souches Dahl salt-sensitive [1] et Lewis, respectivement. Des études précédentes dans notre laboratoire ont localisé trois QTL à PA au niveau du chromosome 18 chez le rat. Au cours de ce projet, de nouvelles sous-souches ont été construites afin de raffiner la cartographie de ces QTL. Ainsi, les C18QTL1, C18QTL3 et C18QTL4 ont été définis. Des analyses moléculaires ont été effectuées sur deux gènes candidats pour le C18QTL3; à savoir, Adrb2 et Nedd4l associés précédemment à l’hypertension. La comparaison des résultats de séquençage des régions régulatrices et codantes de ces deux gènes, ainsi que leur analyse d’expression par qRT-PCR chez les souches contrastantes DSS et Lewis, n’ont pas montré de différence significative pouvant expliquer la variation du phénotype observé. Des études plus poussées devront être effectuées sur ces deux gènes et, le cas échéant, l’analyse d’autres gènes contenus dans le C18QTL3 devra être entamée afin d’identifier le gène responsable de ce QTL.

Waxing Ornamental : Reading a Poetics of Excess in Virginia Woolf’s Orlando and Djuna Barnes’s Nightwood

Ce mémoire de maîtrise porte sur une poétique de l’excès dans Orlando de Virginia Woolf et Nightwood de Djuna Barnes comme une stratégie combattant la tendance qu’a le modernisme à dévaloriser l’écriture des femmes comme étant trop ornementale. J’expose comment Ezra Pound, T.S. Eliot, et Wyndham Lewis tentent de récupérer la notion du détail afin d’affirmer une poétique masculin. Je fais appel également aux oeuvres de l’architecte autrichien Adolf Loos qui souligne sa dénonciation de l’ornement comme régressif. Dans Orlando et Nightwood, je considère l’excès associé au corps. Je soutiens que, dans ces textes, les corps dépassent les limites de la représentation moderniste. Je considère aussi comment Orlando et Nightwood font apparaître la narration comme ornement et écrivent excessivement l’histoire et le temps. Pour conclure, je propose une façon de lire l’excès afin de reconceptualiser le potentiel de production de la signification dans des textes modernistes.

Selective N-monomethylation of aniline over Zn1-xNixFe2O4 (x=0, 0.2, 0.5, 0.8 and 1) type systems

The reaction of aniline with methanol was carried out over Zn1-xNixFe2O4 (x= 0, 0.2, 0.5, 0.8 and 1) type systems in a fixed-bed down-flow reactor. It was observed that systems possessing low ``x'' values are highly selective and active for mono N-alkylation of aniline leading to N-methyl aniline. Selectivity for N-methyl aniline over ZnFe2O4 was more than 99% under the optimized reaction conditions. Even at methanol to aniline molar ratio of 2, the yield of N-methyl aniline was nearly 55.5%, whereas its yield exceeded 67% at the molar ratio of 7. The Lewis acid sites of the catalysts are mainly responsible for the good catalytic performance. Cation distribution in the spinel lattice influences their acido-basic properties, and hence, these factors have been considered as helpful to evaluate the activity and stability of the systems.

Liquid phase benzoylation of arenes over iron promoted sulphated zirconia

The present work undertakes the preparation and physico-chemical characterisation of iron promoted sulphated zirconia (SZ) with different amounts of iron loading and their application to Friedel-Crafts benzoylation of benzene, toluene and xylene under different experimental conditions, XRD and laser Raman techniques reveal the stabilisation of the tetragonal phase of zirconia and the existence of iron in highly dispersed form as Fe203 on the catalyst surface. The surface acidic properties were determined by ammonia temperature programmed desorption (TPD) and perylene adsorption, The results were supported by the TGA studies after adsorption of pyridine and 2,6-dimethylpyridine (2,6-DMP), Strong Lewis acid sites on the surface, which are evident from TPD and perylene adsorption studies. explain the high catalytic activity of the systems towards benzoylation. The experimental results provide evidence for the truly heterogeneous nature of the reaction. The studies also establish the resistance to deactivation in the metal incorporated sulphated systems.

Low-temperature determination of theophylline dimethyl sulfoxide solvate

The title solvate, C7H8N4O2 center dot C2H6OS, was obtained unintentionally from a cocrystal screen involving theophylline and isophthalic acid. One molecule each of theophylline and dimethyl sulfoxide is present in the asymmetric unit. The packing consists of molecular sheets lying parallel to the ( 040) series of lattice planes, in which each theophylline molecule is hydrogen bonded to one dimethyl sulfoxide molecule through an N-H center dot center dot center dot O [2.7658 (15) angstrom] hydrogen bond. This particular hydrogen-bond donor was found to be used in this type of interaction in a variety of other crystal structures of theophylline.

Synthesis and characterization of biocompatible, thermoresponsive ABC and ABA triblock copolymer gelators

The synthesis of doubly thermoresponsive PPO-PMPC-PNIPAM triblock copolymer gelators by atom transfer radical polymerization using a PPO-based macroinitiator is described. Provided that the PPO block is sufficiently long, dynamic light scattering and differential scanning calorimetry studies confirm the presence of two separate thermal transitions corresponding to micellization and gelation, as expected. However, these ABC-type triblock copolymers proved to be rather inefficient gelators: free-standing gels at 37 degrees C required a triblock copolymer concentration of around 20 wt%. This gelator performance should be compared with copolymer concentrations of 6-7 wt% required for the PNIPAM-PMPC-PNIPAM triblock copolymers reported previously. Clearly, the separation of micellar self-assembly from gel network formation does not lead to enhanced gelator efficiencies, at least for this particular system. Nevertheless, there are some features of interest in the present study. In particular, close inspection of the viscosity vs temperature plot obtained for a PPO43-PMPC160-PNIPAM(81) triblock copolymer revealed a local minimum in viscosity. This is consistent with intramicelle collapse of the outer PNIPAM blocks prior to the development of the intermicelle hydrophobic interactions that are a prerequisite for macroscopic gelation.