Brick and clay record.

Coal abstracts

Head and neck cancer: past, present and future

Head and neck cancer consists of a diverse group of cancers that ranges from cutaneous, lip, salivary glands, sinuses, oral cavity, pharynx and larynx. Each group dictates different management. In this review, the primary focus is on head and neck squamous cell carcinoma (HNSCC) arising from the mucosal lining of the oral cavity and pharynx, excluding nasopharyngeal cancer. Presently, HNSCC is the sixth most prevalent neoplasm in the world, with approximately 900,000 cases diagnosed worldwide. Prognosis has improved little in the past 30 years. In those who have survived, pain, disfigurement and physical disability from treatment have had an enormous psychosocial impact on their lives. Management of these patients remains a challenge, especially in developing countries where this disease is most common. Of all human cancers, HNSCC is the most distressing since the head and neck is the site of the most complex functional anatomy in the human body. Its areas of responsibility include breathing, the CNS, vision, hearing, balance, olfaction, taste, swallowing, voice, endocrine and cosmesis. Cancers that occur in this area impact on these important human functions. Consequently, in treating cancers of the head and neck, the effects of the treatment on the functional outcome of the patient need the most serious consideration. In assessing the success of HNSCC treatment, consideration of both the survival and functional deficits that the patient may suffer as a consequence of their treatment are of paramount importance. For this reason, the modern-day management of head and neck patients should be carried out in a multidisciplinary head and neck clinic.

Mechanisms for triggering high-voltage breakdown in vacuum

The electrical and optical characteristics of a cylindrical alumina insulator (94% Al203) have been measured under ultra-high vacuum (P < 10-8 mBar) conditions. A high-resolution CCD camera was used to make real-time optical recordings of DC prebreakdown luminescence from the ceramic, under conditions where DC current magnitudes were limited to less than 50μA. Two concentric metallized rings formed a pair of co-axial electrodes, on the end-face of the alumina tube; a third 'transparent' electrode was employed to study the effect of an orthogonal electric field upon the radial conduction processes within the metallized alumina specimen. The wavelength-spectra of the emitted light was quantified using a high-speed scanning monochromator and photo-multiplier tube detector. Concurrent electrical measurements were made alongside the recording of optical-emission images. An observed time-dependence of the photon-emission is correlated with a time-variation observed in the DC current-voltage characteristics of the alumina. Optical images were also recorded of pulsed-field surface-flashover events on the alumina ceramic. An intensified high-speed video technique provided 1ms frames of surface-flashover events, whilst 100ns frames were achieved using an ultra high-speed fast-framing camera. By coupling this fast-frame camera to a digital storage oscilloscope, it was possible to establish a temporal correlation between the application of a voltage-pulse to the ceramic and the evolution of photonic emissions from the subsequent surface-flashover event. The electro-optical DC prebreakdown characteristics of the alumina are discussed in terms of solid-state photon-emission processes, that are believed to arise from radiative electron-recombination at vacancy-defects and substitutional impurity centres within the surface-layers of the ceramic. The physical nature of vacancy-defects within an alumina dielectric is extensively explored, with a particular focus placed upon the trapped electron energy-levels that may be present at these defect centres. Finally, consideration is given to the practical application of alumina in the trigger-ceramic of a sealed triggered vacuum gap (TVG) switch. For this purpose, a physical model describing the initiation of electrical breakdown within the TVG regime is proposed, and is based upon the explosive destabilisation of trapped charge within the alumina ceramic, triggering the onset of surface-flashover along the insulator. In the main-gap prebreakdown phase, it is suggested that the electrical-breakdown of the TVG is initiated by the low-field 'stripping' of prebreakdown electrons from vacancy-defects in the ceramic under the influence of an orthogonal main-gap electric field.

The use of treatment theories and procedures for postural control in adult with hemiplegia: A national survey

This study investigated the use of treatment theories and procedures for postural control training used by Occupational Therapists (OTs) when working with hemiplegic adults who have had cerebrovascular accident (CVA) or traumatic brain injury (TBI). The method of data collection was a national survey of 400 randomly selected physical disability OTs with 127 usable surveys returned. Results showed that the most common used treatment theory was neurodevelopmental treatment (NDT), followed by motor relearning program (MRP), proprioceptive neuromuscular facilitation (PNF), Brunnstrom's approach, and the approach of Rood. The most common treatment posture used was sitting, followed by standing, mat activity, equilibrium reaction training, and walking. The factors affecting the use of various treatment theories procedures were years certified, years of clinical experience, work situation and work status. Pearson correlation coefficient analyses found significant positive relationships between treatment theories and postures. There were significant high correlations between usage of all pairs of treatment procedures. ^

Concepções de mulheres com deficiência física sobre a maternidade

The study aimed to understand the concept of women with physical disabilities about their ability to gestate, give birth or care a child. This is an exploratory, descriptive study with qualitative approach developed in three non-governmental organizations in Natal, Rio Grande do Norte, Brazil. The data collection occurred in the period from April to June, 2014, through semi-structured interviews, using a script composed by sociodemographic questions and a guiding one. It was obtained a priori the permission from the association’s directors, the approval from the Research Ethics Committee, of the Federal University of Rio Grande do Norte, CAAE nº 27442814.7.0000.5537 and the assent n° 618.045, as well as the participant’s formal authorization by signing the Informed Consent Statement. Participated in the study 12 women, selected according to the following inclusion criteria: to have physical disability, to be aged 18 to 49 years old, and to affirm the existence of limiting characteristics from early childhood (0-3 years). The information obtained in the interviews were subjected to the precepts of Content Analysis according to Bardin, under the thematic analysis technique. From this process, three categories emerged: Conceiving motherhood in front of disability; Conceiving the capacity to be mother with disability; and Conceiving the support during pregnancy and puerperium period. As the theoretical framework we adopted the principles of symbolic interactionism proposed by Blumer. The discussion was supported by literature findings on women's health care in the context of reproduction. The interviewees conceive motherhood as an accomplishment and believe in their own ability to gestate, give birth and care a child. However, the desire for the maternal role tends to be influenced by adverse feelings and limitations raised by disability, social barriers and prejudices. They also referred the importance of support from partner, family and health professionals in the care of child. Upon these findings, it is understood that although there are barriers to the realization of their desire, these barriers were not enough to make them give up on becoming a mother. Therefore, it is necessary that health professionals, highlighted the nurse, be trained to care for women with disabilities in the context of reproductive health care in order to offer adequate support to their needs

Uso de resíduos de queima de casca de café e argila da região sul da Bahia na obtenção de isolador elétrico cerâmico

The electrical ceramic insulators industry, uses noble raw materials such as siliceous and aluminous clays of white burning, in order to provide plasticity of the mass and contribute to electrical and mechanical properties required of the product, and feldspar with the flux function In literature references the composition of the masses indicates that the clay participates in percentage between 20 and 32, and feldspar 8 to 35, these materials have significant cost. In this research was performed the total replacement of commercial clay, for white burning clay from Santa Luzia region in southern Bahia and partial replacement of feldspar by ash residue of husk conilon coffee burning, from extreme south of Bahia. The objective of replacement these raw materials is to aver its technical feasibility and call attention for the embryo pole of ceramic industry for the existing in the south and extreme south of Bahia, which has significant reserves of noble raw materials such as clay white burning, kaolin, quartz and feldspar, and generates significant volume of gray husk conilon coffee as alternate flux. Clay Santa Luzia is prima noble material whose current commercial application is the production of white roofing. The residue of coffee husk ash is discarded near of production sites and is harmful to the environment. Phase diagrams and statistic design of experiments, were used for optimization and cost savings in research. The results confirmed the expectations of obtaining electrical ceramic insulators, with white burning clay of Santa Luzia and partial replacement up to 35.4% of feldspar, by treaty residue of conilon ash coffee husk burning. The statistic design that showed best results was for formulation with percentages of: clay 26.4 to 30.4%; kaolin 14.85 to 17.1%; feldspar 12.92 to 16.96%; R2 residue 7.08 to 9.2% and Quartz 32.5 to 38.75%, relative to the total mass of the mixture. The best results indicated; 0.2 to 1.4% apparent porosity , water absorption 0.1 to 0.7%, flexural strength 35 to 45MPa , dielectric strength 35-41 kV/cm , the transverse resistivity 8x109 2.5x1010 Ω.cm and for the dielectric constant ε/ε0 7 to 10.4, specification parameters for manufacturing ceramic electrical insulators of low and medium voltage.

Incorporação do resíduo de cascalho de perfuração de poços de petróleo em formulações cerâmicas

During its operations, the oil industry generates a lot of waste, including gravel from drilling. Control of environmental impacts caused by this waste represents a major challenge. Such impacts can be minimized when it is given an appropriate management by being properly treated and properly disposed or recycled. The properties of these materials can be greatly influenced when a waste is added to its composition. This work aims to study the incorporation of gravel waste oil-well drilling in the standard body for production of red ceramic from a ceramic industry in São Gonçalo do Amarante / RN. The success of the incorporation can minimize costs in the production of ceramic pieces and reduce the environmental impacts caused by waste. The raw materials used were collected, characterized, and formulated with the percentages of 0%, 20% and 40% by weight of substitution of residue were synthesized at temperatures of 900, 1.010 and 1.120 °C using 30 minute firing intervals, 1 hour and 30min and 2 hours and 30 minutes, based on a factorial design 2³. Samples were then subjected to the tests of Water Absorption, Linear Retraction Firing, Flexural Rupture Strength, Apparent Porosity and Apparent Specific mass and Scanning Electron Microscopy (SEM) of break section. The results showed that the use of the residue for the manufacture of the ceramic products is possible (tiles, bricks and massive hollow bricks) replacing the clay to 40%, meeting the requirements of the standard and the literature for the technological properties of the final product.

Cognitive dysfunction in Duchenne muscular dystrophy: a possible role for neuromodulatory immune molecules

Duchenne muscular dystrophy (DMD) is an X chromosome-linked disease characterized by progressive physical disability, immobility, and premature death in affected boys. Underlying the devastating symptoms of DMD is the loss of dystrophin, a structural protein that connects the extracellular matrix to the cell cytoskeleton and provides protection against contraction-induced damage in muscle cells, leading to chronic peripheral inflammation. However, dystrophin is also expressed in neurons within specific brain regions, including the hippocampus, a structure associated with learning and memory formation. Linked to this, a subset of boys with DMD exhibit nonprogressing cognitive dysfunction, with deficits in verbal, short-term, and working memory. Furthermore, in the genetically comparable dystrophin-deficient mdx mouse model of DMD, some, but not all, types of learning and memory are deficient, and specific deficits in synaptogenesis and channel clustering at synapses has been noted. Little consideration has been devoted to the cognitive deficits associated with DMD compared with the research conducted into the peripheral effects of dystrophin deficiency. Therefore, this review focuses on what is known about the role of full-length dystrophin (Dp427) in hippocampal neurons. The importance of dystrophin in learning and memory is assessed, and the potential importance that inflammatory mediators, which are chronically elevated in dystrophinopathies, may have on hippocampal function is also evaluated.

Avaliação de risco ambiental na indústria em regime de responsabilidade ambiental

O presente relatório surgiu na sequência do estágio curricular realizado na empresa Envienergy - Ambiente e Energia, Lda. O tema do estágio resultou da necessidade de responsabilização das empresas pelos danos ambientais que possam surgir da sua atividade, segundo as disposições da Diretiva n.º 2004/35/CE, de 21 de Abril, transposta para o regime jurídico nacional pelo Decreto-Lei n.º 147/2008, de 29 de julho, também conhecido por Diploma da Responsabilidade Ambiental. No âmbito deste regime de responsabilidade, desenvolveu-se e aplicou-se a um caso de estudo, uma metodologia de avaliação de riscos ambientais, com posterior cálculo da garantia financeira. O caso de estudo foi uma empresa industrial da área da cerâmica, de médias dimensões, cliente da Envienergy. A metodologia consistiu numa apreciação do estado inicial do ambiente envolvente à empresa em estudo (designada como CERÂMICA), levantamento dos riscos da sua atividade, formulação de cenários de acidentes, avaliação da severidade e da probabilidade dos riscos de acidente e estimativa dos custos de reparação e compensação ambiental dos danos que a atividade possa provocar (a garantia financeira). Segundo esta metodologia, o caso de estudo requer uma garantia financeira no valor de 26.125€, correspondente ao valor financeiro necessário para assegurar que seja possível à indústria avaliada a responsabilização ambiental por danos provocados pela sua atividade. A metodologia também prevê a sugestão de medidas de redução de risco e, considerando a aplicação dessas medidas, a reavaliação dos riscos e da garantia financeira. Desta reavaliação resultou uma garantia financeira estimada em 5.403€. A avaliação de riscos ambientais feita à indústria cerâmica serviu para testar e comprovar a adaptabilidade da metodologia a um caso real. Os resultados obtidos foram satisfatórios, e a metodologia está apta a ser aplicada a casos de estudo de dimensão semelhantes ao caso de estudo avaliado neste relatório.

Análise energética a uma instalação produtiva de cerâmica de revestimento

O presente trabalho deriva do Projeto GALP 20–20-20 implementado na empresa Primus Vitória, em parceria com a Universidade de Aveiro. A empresa na qual foi efetuado o estágio produz azulejos para revestimento, estando situada na Zona Industrial de Taboeira. Este relatório expõe a caracterização energética da Primus Vitória, onde são apresentados consumos de energia elétrica e gás natural nos diversos sectores produtivos, relação entre consumos energéticos globais e a produção de azulejos e ainda os indicadores energéticos da mesma. Através deste estudo foi possível a criação de medidas de eficiência energética passíveis de implementação, aplicadas a equipamentos consumidores de energia elétrica, através da substituição do motor elétrico existente no setor da aspiração, e de gás natural, otimizando o funcionamento da plastificadora para sequencial, com o devido impacte no consumo final de energia. Como trabalho futuro propõe-se o desenvolvimento de um plano de monotorização de consumos energéticos com o intuito de obter um controle rigoroso dos mesmos reduzindo possíveis perdas e identificando possíveis defeitos no processo produtivo.

Patterns of rare earth and other trace elements in Paleogene and Miocene clayey sediments from the Mondego platform (Central Portugal)

In the present study the origin of clay deposits occurring in an inland platform, in central Portugal, was investigated by their mineralogical and chemical composition. The clay deposits, exploited for ceramic industry are composed of silt-clay facies, the Monteira Member and the Arroça Member, which are assigned to the Coja Formation (Paleogene) and the Campelo Formation (Miocene), respectively. These clayey facies show almost compositional homogeneity, especially concerning texture. The mineralogical composition of the Monteira Member displays slightly higher content in smectite and interstratified clay minerals, which is supported by the chemical composition of samples analyzed. Both members present similar REE patterns, displaying an intense weathering record and little variation in the source area composition. Minor element geochemistry suggests low content in heavy minerals and transition metals. REE patterns and ratios of geochemical parameters support the dominant metasedimentary provenance, with a granite source contribution and also mature recycled sediments of continental origin. The study results’ suggest that the clays of these two members have the same source in terms of lithology and recycled sediments from the Hesperian massif. During the deposition of the Arroça Member, a major remobilization of the Monteira Member is suggested, explaining the geochemical similarity of both facies.

Desenvolvimento de formulações para produção de grés porcelanato a partir de matérias-primas da região da bacia do Parnaíba

Brazil is a great ceramic raw materials productor because of the its big number of clay deposits, in various areas of the ceramic industry. Although, the majority of the natural reservations are unknown or not studied yet, so there is no scientific technical dates that can guide their usage and industrial application, as well as the racional and optimazed way of usage by the industrial sector. The state of Maranhão has a gigant mineral wealth as esmectite, bentonite, kaolin, clays, feldspates, marine salt, iron and others, but produce only products with small agregated value compared to the porcelanato, one of the most expensives ceramic cover tiles, the reason for that is the low water absorption (lower than 0,5%), beside present amazing tecnicals features, like mechanical resistence. The main objective of the work is to do the characterization of four clays, with the finallity of find an application by the results and develop formulations to produce porcelanato using these raw materials from Timon-MA. For this were made the raw materials characterization using X ray fluorecence; X ray diffraction; Differencial thermal analysis; Dilatometric analysis and Tecnological properties, planing three formulations that were sinterized at six different temperatures: 1150, 1170, 1190, 1210, 1230 and 1250ºC for 7 minutes. After the sinteratization, the samples were submitted to tension resistance analysis. Were attained two formulations with the requested properties to produce porcelanato

Influência da gipsita no surgimento de eflorescência em telhas cerâmicas

The red ceramic industry is recognized as of major importance in Piauí State. The State capital, Teresina, is the greatest producer of this material ( production about 18 million peaces), which is used mainly for masonry sealing blocks. One of the most frequent problems in this kind of products is the efflorescence. This work has the main objective of studying the influence of gypsum addition on non-glazed tiles, by using the local industry production standards. The raw materials were characterized by FRX, DRX, TGA, DTA and AD. Extruded test specimens were made with the addition of 1, 3 and 5% of gypsum in the ceramic paste, burned at 850oC, 950oC and 1050oC and submitted to further technological tests and microestrutural analysis by the scanning electron microscope. In order to accelerate the aging of bodies of evidence, they were immersed in successive water baths and posterior drying. The reference ceramic paste showed tendency to efflorescence formation after drying and consolidated efflorescence after burning, but no affecting the technological results

Estudo do comportamento plástico, mecânico, microestrutural e térmico do concreto produzido com resíduo de porcelanato

Population growth experienced in major cities, allied to society s need of infra-structure, especially ones related to habitational demands, increases the consumption of construction materials. As a consequence, consumption of natural resources itself. Thus, due to this process, concrete is one of the most produced materials in civil construction. This is also due to the great diversity of its application, easiness in its execution and adequate mechanical performance, as well as low production costs. Following the same tendencies in construction development, the ceramic industry has intensified the production of porcelain ceramic tiles and floors. These are achieved by a fine finishing and receive polishing at the end of the fabrication process. This work researched the use of porcelain residues in polishing for the production of concrete. All of which; due to economical and environmental issues. This process aims to prove adequate destiny for this type of residue, due to environmental issues, incorporating it to the concrete itself; all of which provides economy in consumption of the materials that constitute concrete. Thus, the main characteristics of concrete were investigated through the inclusion of different concentration of the porcelain residue as additional trait element. The residue rates incorporated to the trait varied from 10% to 50% in relation to the cement mass, in the traits with plastic additives and without plastic additives. It is observed that the inclusion of porcelain residue produced a meaningful alteration in the consistency of fresh concrete. This residue has a fine granulometry and it considerably absorbed the water used in the concrete spreading, influencing the way this material is dealt with. Thus, the value of cement striking decreases with the increase of residues present in trait. The maximal incorporation of the residue was of 50%, massively, for the same factor water/initial cement. The use of residues in concrete results in an 40% increase in the compression resistance. It is also proportional to residue concentration of porcelain in the trait. The microstructure was also favored once porosity and concrete absorption decreases with the use of this residue. The parameters demonstrate the quality and durability of the concrete produced with this residue. The use of porcelain residue in concrete composition has not produced meaningful thermal behavior changes. Thermal conductivity, heat capacity and thermal diffusivity have been maintained basically constant

Impact of dental caries on quality of life of adolescents according to access to oral health services: a cross sectional study

Aim: This study presents the prevalence of dental caries and its relation to the quality of life of adolescents according to the access to dental health services. Methods: Two hundred and fifty-six adolescents between 15 and 19 years of age participated in the study; they were all enrolled in public schools in a countryside municipality of the São Paulo State. Data related to dental caries were evaluated by the DMFT Index, and OHIP-14 was used for evaluating the quality of life. Mann Whitney and Spearmann correlation tests were also used (p<0.05). Results: A DMFT of 3.09 (±3.30) was found with a higher prevalence among the adolescents who used public dental services (3.43±3.34) compared with those who used private services (2.94±3.28). A statistically significant relationship between the decay component of DMFT with physical pain (0.020), physical disability (0.002) and quality of life (0.017) was verified. Conclusions: A low prevalence of dental caries was observed, and it was higher in adolescents who used public oral health services rather than private ones, evidencing the low influence of oral health on the quality of life of the participants.