Knowledge-based systems and engineering software

The work described was carried out as part of a collaborative Alvey software engineering project (project number SE057). The project collaborators were the Inter-Disciplinary Higher Degrees Scheme of the University of Aston in Birmingham, BIS Applied Systems Ltd. (BIS) and the British Steel Corporation. The aim of the project was to investigate the potential application of knowledge-based systems (KBSs) to the design of commercial data processing (DP) systems. The work was primarily concerned with BIS's Structured Systems Design (SSD) methodology for DP systems development and how users of this methodology could be supported using KBS tools. The problems encountered by users of SSD are discussed and potential forms of computer-based support for inexpert designers are identified. The architecture for a support environment for SSD is proposed based on the integration of KBS and non-KBS tools for individual design tasks within SSD - The Intellipse system. The Intellipse system has two modes of operation - Advisor and Designer. The design, implementation and user-evaluation of Advisor are discussed. The results of a Designer feasibility study, the aim of which was to analyse major design tasks in SSD to assess their suitability for KBS support, are reported. The potential role of KBS tools in the domain of database design is discussed. The project involved extensive knowledge engineering sessions with expert DP systems designers. Some practical lessons in relation to KBS development are derived from this experience. The nature of the expertise possessed by expert designers is discussed. The need for operational KBSs to be built to the same standards as other commercial and industrial software is identified. A comparison between current KBS and conventional DP systems development is made. On the basis of this analysis, a structured development method for KBSs in proposed - the POLITE model. Some initial results of applying this method to KBS development are discussed. Several areas for further research and development are identified.

User interface design support for the development of knowledge-based systems

The present scarcity of operational knowledge-based systems (KBS) has been attributed, in part, to an inadequate consideration shown to user interface design during development. From a human factors perspective the problem has stemmed from an overall lack of user-centred design principles. Consequently the integration of human factors principles and techniques is seen as a necessary and important precursor to ensuring the implementation of KBS which are useful to, and usable by, the end-users for whom they are intended. Focussing upon KBS work taking place within commercial and industrial environments, this research set out to assess both the extent to which human factors support was presently being utilised within development, and the future path for human factors integration. The assessment consisted of interviews conducted with a number of commercial and industrial organisations involved in KBS development; and a set of three detailed case studies of individual KBS projects. Two of the studies were carried out within a collaborative Alvey project, involving the Interdisciplinary Higher Degrees Scheme (IHD) at the University of Aston in Birmingham, BIS Applied Systems Ltd (BIS), and the British Steel Corporation. This project, which had provided the initial basis and funding for the research, was concerned with the application of KBS to the design of commercial data processing (DP) systems. The third study stemmed from involvement on a KBS project being carried out by the Technology Division of the Trustees Saving Bank Group plc. The preliminary research highlighted poor human factors integration. In particular, there was a lack of early consideration of end-user requirements definition and user-centred evaluation. Instead concentration was given to the construction of the knowledge base and prototype evaluation with the expert(s). In response to this identified problem, a set of methods was developed that was aimed at encouraging developers to consider user interface requirements early on in a project. These methods were then applied in the two further projects, and their uptake within the overall development process was monitored. Experience from the two studies demonstrated that early consideration of user interface requirements was both feasible, and instructive for guiding future development work. In particular, it was shown a user interface prototype could be used as a basis for capturing requirements at the functional (task) level, and at the interface dialogue level. Extrapolating from this experience, a KBS life-cycle model is proposed which incorporates user interface design (and within that, user evaluation) as a largely parallel, rather than subsequent, activity to knowledge base construction. Further to this, there is a discussion of several key elements which can be seen as inhibiting the integration of human factors within KBS development. These elements stem from characteristics of present KBS development practice; from constraints within the commercial and industrial development environments; and from the state of existing human factors support.

A method for automatically eliciting node weights in a hierarchical knowledge-based structure for reasoning with uncertainty

Hierarchical knowledge structures are frequently used within clinical decision support systems as part of the model for generating intelligent advice. The nodes in the hierarchy inevitably have varying influence on the decisionmaking processes, which needs to be reflected by parameters. If the model has been elicited from human experts, it is not feasible to ask them to estimate the parameters because there will be so many in even moderately-sized structures. This paper describes how the parameters could be obtained from data instead, using only a small number of cases. The original method [1] is applied to a particular web-based clinical decision support system called GRiST, which uses its hierarchical knowledge to quantify the risks associated with mental-health problems. The knowledge was elicited from multidisciplinary mental-health practitioners but the tree has several thousand nodes, all requiring an estimation of their relative influence on the assessment process. The method described in the paper shows how they can be obtained from about 200 cases instead. It greatly reduces the experts’ elicitation tasks and has the potential for being generalised to similar knowledge-engineering domains where relative weightings of node siblings are part of the parameter space.

Knowledge-based development in leading regions across the globe:an exploratory analysis of the co-evolution of resources, capabilities, and outputs

It is widely observed that the global geography of innovation is rapidly evolving. This paper presents evidence concerning the contemporary evolution of the globe's most productive regions. The paper uncovers the underlying structure and co-evolution of knowledge-based resources, capabilities and outputs across these regions. The analysis identifies two key trends by which the economic evolution and growth patterns of these regions are differentiated-namely, knowledge-based growth and labour market growth. The knowledge-based growth factor represents the underlying commonality found between the growth of economic output, earnings and a range of knowledge-based resources. The labour market growth factor represents the capability of regions to draw on their human capital. Overall, spectacular knowledge-based growth of leading Chinese regions is evident, highlighting a continued shift of knowledge-based resources to Asia. It is concluded that regional growth in knowledge production investment and the capacity to draw on regional human capital reserves are neither necessarily traded-off nor complementary to each other. © 2012 Urban Studies Journal Limited.

Developing a knowledge-based perspective on coordination:the case of global software projects

We have attempted to bring together two areas which are challenging for both IS research and practice: forms of coordination and management of knowledge in the context of global, virtual software development projects. We developed a more comprehensive, knowledge-based model of how coordination can be achieved, and\illustrated the heuristic and explanatory power of the model when applied to global software projects experiencing different degrees of success. We first reviewed the literature on coordination and determined what is known about coordination of knowledge in global software projects. From this we developed a new, distinctive knowledge-based model of coordination, which was then employed to analyze two case studies of global software projects, at SAP and Baan, to illustrate the utility of the model.

Structural funds and the knowledge-based economy:a regional case-study (1999-2009)

The research presented in this thesis investigates the nature of the relationship between the development of the Knowledge-Based Economy (KBE) and Structural Funds (SF) in European regions. A particular focus is placed on the West Midlands (UK) and Silesia (Poland). The time-frame taken into account in this research is the years 1999 to 2009. This is methodologically addressed by firstly establishing a new way of calculating the General Index of the KBE for all of the EU regions; secondly, applying a number of statistical methods to measure the influence of the Funds on the changes in the regional KBE over time; and finally, by conducting a series of semi-structured stakeholder interviews in the two key case study regions: the West Midlands and Silesia. The three main findings of the thesis are: first, over the examined time-frame, the values of the KBE General Index increased in over 66% of the EU regions; furthermore, the number of the “new” EU regions in which the KBE increased over time is far higher than in the “old” EU. Second, any impact of Structural Funds on the regional KBE occurs only in the minority of the European regions and any form of functional dependency between the two can be observed only in 30% of the regions. Third, although the pattern of development of the regional KBE and the correlation coefficients differ in the cases of Silesia and the West Midlands, the analysis of variance carried out yields identical results for both regions. Furthermore, the qualitative analysis’ results show similarities in the approach towards the Structural Funds in the two key case-study regions.

Regional evolution and waves of growth:a knowledge-based perspective

The evolution of a regional economy and its competitiveness capacity may involve multiple independent trajectories, through which different sets of resources and capabilities evolve together. However, there is a dearth of evidence concerning how these trends are occurring across the globe. This paper seeks to present evidence in relation to the recent development of the globe’s most productive regions from the viewpoint of their growth trajectories, and the particular form of growth they are experiencing. The aim is to uncover the underlying structure of the changes in knowledge-based resources, capabilities and outputs across regions, and offer an analysis of these regions according to an uncovered set of key trends. The analysis identifies three key trends by which the economic evolution and growth patterns of these regions are differentiated—namely the Fifth Wave Growth, the Third & Fourth Wave Growth, and Government-led Third Wave Growth. Overall, spectacular knowledge-based growth of leading Chinese regions is evident, highlighting a continued shift of knowledge-based resources to Asia. In addition, a superstructure is observed at the global scale, consisting of two separate continuums that explicitly distinguish Chinese regions from the rest in terms of regional growth trajectories.

Study on synthetic and bio-based phenol-formaldehyde adhesives for the wood-based industry

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY AND INFORMATION SERVICES WITH PRIOR ARRANGEMENT

Knowledge-based system for casting process selection

Design of casting entails the knowledge of various interacting factors that are unique to casting process, and, quite often, product designers do not have the required foundry-specific knowledge. Casting designers normally have to liaise with casting experts in order to ensure the product designed is castable and the optimum casting method is selected. This two-way communication results in long design lead times, and lack of it can easily lead to incorrect casting design. A computer-based system at the discretion of a design engineer can, however, alleviate this problem and enhance the prospect of casting design for manufacture. This paper proposes a knowledge-based expert system approach to assist casting product designers in selecting the most suitable casting process for specified casting design requirements, during the design phase of product manufacture. A prototype expert system has been developed, based on production rules knowledge representation technique. The proposed system consists of a number of autonomous but interconnected levels, each dealing with a specific group of factors, namely, casting alloy, shape and complexity parameters, accuracy requirements and comparative costs, based on production quantity. The user interface has been so designed to allow the user to have a clear view of how casting design parameters affect the selection of various casting processes at each level; if necessary, the appropriate design changes can be made to facilitate the castability of the product being designed, or to suit the design to a preferred casting method.

Fuzzy knowledge-based approach to treating uncertainty in inventory control

Inventory control in complex manufacturing environments encounters various sources of uncertainity and imprecision. This paper presents one fuzzy knowledge-based approach to solving the problem of order quantity determination, in the presence of uncertain demand, lead time and actual inventory level. Uncertain data are represented by fuzzy numbers, and vaguely defined relations between them are modeled by fuzzy if-then rules. The proposed representation and inference mechanism are verified using a large numbers of examples. The results of three representative cases are summarized. Finally a comparison between the developed fuzzy knowledge-based and traditional, probabilistic approaches is discussed.

Regional evolution and waves of growth:a knowledge-based perspective

The evolution of a regional economy and its competitiveness capacity may involve multiple independent trajectories through which different sets of resources and capabilities evolve together. However, there is a dearth of evidence concerning how these trends are occurring across the globe. Based on the underlying tenets of the streams of research relating to regional competitiveness, knowledge cities/regions, and knowledge-based urban development, this paper seeks to present an empirical approach to establishing such evidence in relation to the recent development of the globe’s most productive regions from the viewpoint of their growth trajectories and the particular form of growth they are experiencing. The aim is to uncover the underlying structure of the changes in knowledge-based resources, capabilities and outputs across regions, and offer an analysis of these regions according to an uncovered set of key trends. The analysis identifies three key trends by which the economic evolution and growth patterns of these regions are differentiated – namely the Fifth Wave Growth, the Third & Fourth Wave Growth, and Government-led Third Wave Growth. Overall, spectacular knowledge-based growth of leading Chinese regions is evident, highlighting a continued shift of knowledge-based resources to Asia. In addition, a superstructure is observed at the global scale, consisting of two separate continuums that explicitly distinguish Chinese regions from the rest in terms of regional growth trajectories. © 2014 Elsevier Ltd. All rights reserved. © 2014 Elsevier Ltd. All rights reserved.

Knowledge-based Robot Control

The paper is related with the problem of developing autonomous intelligent robots for complex environments. In details it outlines a knowledge-based robot control architecture that combines several techniques in order to supply an ability to adapt and act autonomously in complex environments. The described architecture has been implemented as a robotic system that demonstrates its operation in dynamic environment. Although the robotic system demonstrates a certain level of autonomy, the experiments show that there are situation, in which the developed base architecture should be complemented with additional modules. The last few chapters of the paper describe the experimentation results and the current state of further research towards the developed architecture.

Systemological Knowledge-based Technology for Solving Complete Ill-structured Problems

Original method and technology of systemological «Unit-Function-Object» analysis for solving complete ill-structured problems is proposed. The given visual grapho-analytical UFO technology for the fist time combines capabilities and advantages of the system and object approaches and can be used for business reengineering and for information systems design. UFO- technology procedures are formalized by pattern-theory methods and developed by embedding systemological conceptual classification models into the system-object analysis and software tools. Technology is based on natural classification and helps to investigate deep semantic regularities of subject domain and to take proper account of system-classes essential properties the most objectively. Systemological knowledge models are based on method which for the first time synthesizes system and classification analysis. It allows creating CASE-toolkit of a new generation for organizational modelling for companies’ sustainable development and competitive advantages providing.

Knowledge-Based Approach to Document Analysis

The paper presents an approach to extraction of facts from texts of documents. This approach is based on using knowledge about the subject domain, specialized dictionary and the schemes of facts that describe fact structures taking into consideration both semantic and syntactic compatibility of elements of facts. Actually extracted facts combine into one structure the dictionary lexical objects found in the text and match them against concepts of subject domain ontology.