Le produzioni originali Netflix Italia e il loro impatto sul sistema produttivo italiano

L'avvento di Netflix nel mercato dell'audiovisivo è stato spesso descritto usando l'espressione “digital disruption” per sottolineare la radicale rottura con le pratiche precedenti. L'obiettivo di questa tesi è capire se sia effettivamente corretto utilizzare questa espressione e in particolare in quale misura Netflix abbia rivoluzionato il sistema produttivo italiano quando ha iniziato la propria produzione originale nel nostro paese. Netflix ha il merito di aver ribaltato il percorso produttivo tradizionale: il nuovo percorso produttivo inizia con quello che prima era l'ultimo anello della catena, ovvero l'utente. Le produzioni originali delle piattaforme vengono finanziate dagli utenti stessi, tramite la sottoscrizione dell'abbonamento mensile. Si giunge però alla conclusione che la cosiddetta “digital disruption” in realtà si tratti di un falso mito: rispetto al passato ci sono molti più elementi di continuità rispetto a quelli di rottura. Più che una rivoluzione, quello che è avvenuto è stato un rafforzamento di tendenze che erano già in atto. In particolare la crescente importanza della serialità è un processo iniziato già diversi anni prima dell'arrivo di Netflix e che in Italia aveva visto come protagonista Sky. Netflix ha però invertito il flusso di importazione del prodotto statunitense verso l'Europa e il resto del mondo permettendo alle narrazioni non americane di diffondersi facilmente in 190 paesi. Grazie a Netflix, quindi, i prodotti seriali italiani hanno un'inedita opportunità di competere a livello internazionale. Anche i broadcaster, per stare al passo, sottoscrivono accordi di co-produzione internazionale e pensano i loro prodotti fin da subito in un'ottica glocal. La serie Rai L'amica geniale, co-prodotta con HBO e girata in napoletano, dimostra come un certo tipo di serialità italiana stia riuscendo a competere a livello internazionale con ottimi risultati.

Sweet Basil (Ocimum basilicum) Extracts Obtained by Supercritical Fluid Extraction (SFE): Global Yields, Chemical Composition, Antioxidant Activity, and Estimation of the Cost of Manufacturing

In this work, supercritical technology was used to obtain extracts from Ocimum basilicum (sweet basil) with CO(2) and the cosolvent H(2)O at 1, 10, and 20% (w/w). The raw material was obtained from hydroponic cultivation. The extract`s global yield isotherms, chemical compositions, antioxidant activity, and cost of manufacturing were determined. The extraction assays were done for pressures of 10 to 30 MPa at 303 to 323 K. The identification of the compounds present in the extracts was made by GC-MS and ESI-MS. The antioxidant activity of extracts was determined using the coupled reaction of beta-carotene and linolenic acid. At 1% of cosolvent, the largest global yield was obtained at 10 MPa and 303 K (2%, dry basis-d.b.); at 10% of cosolvent the largest global yield was obtained at 10 and 15 MPa (11%, d.b.), and at 20% of cosolvent the largest global yield was detected at 30 MPa and 303 K (24%, d.b.). The main components identified in the extracts were eugenol, germacrene-D, epi-alpha-cadinol, malic acid, tartaric acid, ramnose, caffeic acid, quinic acid, kaempferol, caffeoylquinic acid, and kaempferol 3-O-glucoside. Sweet basil extracts exhibited high antioxidant activity compared to beta-carotene. Three types of SFE extracts from sweet basil were produced, for which the estimated cost of manufacturing (class 5 type) varied from US$ 47.96 to US$ 1,049.58 per kilogram of dry extract.

(-)-Hinokinin-loaded poly(d,l-lactide-co-glycolide) microparticles for Chagas disease

The (-)-hinokinin display high activity against Trypanosoma cruzi in vitro and in vivo. (-)-Hinokinin-loaded poly(d,l-lactide-co-glycolide) microparticles were prepared and characterized in order to protect (-)-hinokinin of biological interactions and promote its sustained release for treatment of Chagas disease. The microparticles contain (-)-hinokinin were prepared by the classical method of the emulsion/solvent evaporation. The scanning electron microscopy, light-scattering analyzer were used to study the morphology and particle size, respectively. The encapsulation efficiency was determined, drug release studies were kinetically evaluated, and the trypanocidal effect was evaluated in vivo. (-)-Hinokinin-loaded microparticles obtained showed a mean diameter of 0.862 A mu m with smooth surface and spherical shape. The encapsulation efficiency was 72.46 A +/- 2.92% and developed system maintained drug release with Higuchi kinetics. The preparation method showed to be suitable, since the morphological characteristics, encapsulation efficiency, and in vitro release profile were satisfactory. In vivo assays showed significant reduction of mice parasitaemia after administration of (-)-hinokinin-loaded microparticles. Thus, the developed microparticles seem to be a promising system for sustained release of (-)-hinokinin for treatment of Chagas disease.

L. (L.) chagasi in aids and visceral leishmaniasis (kala-azar) co-infection

Concomitant skin lesions in visceral leishmaniasis (VL) or kala-azar are rare, being more common the description of post-kala-azar dermal leishmaniasis occurring post treatment of kala-azar. Skin lesions caused by Leishmania donovani are frequently seen in the aids-VL co-infection. In Brazil cutaneous or mucosal forms of tegumentary leishmaniasis concomitant with aids are more commonly registered. Here we present a case of aids-VL co-infection, with unusual cutaneous and digestive compromising attributed to L. (L.) chagasi, with special attention to ecthymatous aspect of the lesion, allied to the absence of parasite on the histological skin biopsy.

Degradation of all-inkjet-printed organic thin-film transistors with TIPS-pentacene under processes applied in textile manufacturing

Printed electronics represent an alternative solution for the manufacturing of low-temperature and large area flexible electronics. The use of inkjet printing is showing major advantages when compared to other established printing technologies such as, gravure, screen or offset printing, allowing the reduction of manufacturing costs due to its efficient material usage and the direct-writing approach without requirement of any masks. However, several technological restrictions for printed electronics can hinder its application potential, e.g. the device stability under atmospheric or even more stringent conditions. Here, we study the influence of specific mechanical, chemical, and temperature treatments usually appearing in manufacturing processes for textiles on the electrical performance of all-inkjet-printed organic thin-film transistors (OTFTs). Therefore, OTFTs where manufactured with silver electrodes, a UV curable dielectric, and 6,13-bis(triisopropylsilylethynyl) pentance (TIPS-pentacene) as the active semiconductor layer. All the layers were deposited using inkjet printing. After electrical characterization of the printed OTFTs, a simple encapsulation method was applied followed by the degradation study allowing a comparison of the electrical performance of treated and not treated OTFTs. Industrial calendering, dyeing, washing and stentering were selected as typical textile processes and treatment methods for the printed OTFTs. It is shown that the all-inkjet-printed OTFTs fabricated in this work are functional after their submission to the textiles processes but with degradation in the electrical performance, exhibiting higher degradation in the OTFTs with shorter channel lengths (L=10 μm).

Cinéastes indépendants, politique fédérale du cinéma et co-production du 'Nouveau cinéma suisse', 1963-1970. Contribution à une sociologie de l'innovation artistique

Ce travail s'intéresse aux modalités d'émergence et d'institutionnalisation d'un nouveau régime de création artistique, plus connu sous le nom de «Nouveau cinéma suisse ».Dans les années 1960-1970, l'arrivée du Nouveau cinéma suisse a bouleversé les manières de faire du cinéma en Suisse et a attiré l'attention sur le septième art helvétique. Comment une innovation artistique parvient-elle à s'imposer ? Comment un consensus autour d'une nouvelle forme artistique et de son mode de production émerge et se stabilise-t-il ? Quel rôle jouent les acteurs et les institutions dans ce processus ? Enfin, quelles sont les relations entre cette situation en devenir et les oeuvres créées dans ces conditions ? Au delà dé ces interrogations, c'est un questionnement théorique, épistémologique qui a motivé cette recherche. A l'image de la sociologie elle-même, l'analyse sociologique de l'art a été traversée, ces dernières années, pas de nombreux débats. Trop souvent, la réflexion s'appuie - ou trébuche -sur des dichotomies convenues :analyse interne /externe de l'art, déterminisme /indétermination des acteurs, reflet /autonomie des oeuvres. Quels sont les outils et les approches que propose la discipline pour analyser un tel objet, quels enseignements peut-on titrer de leur mise à l'épreuve sur un cas concret ? Quel est le défi lancé par le Nouveau cinéma suisse à la sociologie de l'art ?Mais commençons par le début car le point initial de cette longue entreprise était en réalité tout autre.

Manufacturing and characterization of a recombinant adeno-associated virus type 8 reference standard material.

Gene therapy approaches using recombinant adeno-associated virus serotype 2 (rAAV2) and serotype 8 (rAAV8) have achieved significant clinical benefits. The generation of rAAV Reference Standard Materials (RSM) is key to providing points of reference for particle titer, vector genome titer, and infectious titer for gene transfer vectors. Following the example of the rAAV2RSM, here we have generated and characterized a novel RSM based on rAAV serotype 8. The rAAV8RSM was produced using transient transfection, and the purification was based on density gradient ultracentrifugation. The rAAV8RSM was distributed for characterization along with standard assay protocols to 16 laboratories worldwide. Mean titers and 95% confidence intervals were determined for capsid particles (mean, 5.50×10(11) pt/ml; CI, 4.26×10(11) to 6.75×10(11) pt/ml), vector genomes (mean, 5.75×10(11) vg/ml; CI, 3.05×10(11) to 1.09×10(12) vg/ml), and infectious units (mean, 1.26×10(9) IU/ml; CI, 6.46×10(8) to 2.51×10(9) IU/ml). Notably, there was a significant degree of variation between institutions for each assay despite the relatively tight correlation of assay results within an institution. This outcome emphasizes the need to use RSMs to calibrate the titers of rAAV vectors in preclinical and clinical studies at a time when the field is maturing rapidly. The rAAV8RSM has been deposited at the American Type Culture Collection (VR-1816) and is available to the scientific community.

Estudi i implantació del sistema Lean Manufacturing a una empresa convencional del sector de l'automòbil, per incrementar la competitivitat

El projecte es planteja la implantació de la metodologia LEAN en una de les plantes de producció d’una empresa del sector de la indústria de l’automòbil per aconseguir millorar la seva competitivitat. El projecte engloba l’anàlisi de les cadenes de valor de quatre dels productes més significatius que es fabriquen actualment a la planta, mitjançant la metodologia Value Stream Map (VSM), així com el desenvolupament de noves propostes per la millora de cadascuna de les cadenes