Geological observation in southeastern Zanskar and adjacent Lahul area (northern Himalaya).

The paper deals with the stratigraphic and structural setting of the sedimentary sequence cropping out in southeastern Zanskar and adjacent Lahul areas. The Tibetan Zone succession of southeastern Zanskar consists of about 6000 m of sediments, Late Precambrian~ ?Eocene in age, arranged in two superposed slabs (Pugh tal Unit, below, and Zangla Unit, above) tectonically resting upon the High Himalayan Crystalline. The Pughtal sequence, mostly terrigenous with carbonate units in the Cambrian, Silurian and Carboniferous, is about 2500 m thick. It was deposited from ?Late Precambrian to Carboniferous or ?Early Permian. The Permian Panjal Traps constitute the "sole" of the Zangla Unit, whose sedimentary sequence, about 3000 m thick, mainly carbonatic, spans from Late Permian (Kuling Formation) to Middle Jurassic (Kioto Limestone) in eastern Zanskar. In the Zangla area Late Jurassic/Cretaceous formations (Spiti Shales, Giumal Sandstone, Chikkim Limestone) are also present. Towards northwest, the sequence ranges up to Paleocene (Spanboth Formation) and ?Eocene (Chulung La Slates). Au nord de la Haute Chaine, dans la partie septentrionale de I'Himalaya, la marge continentale indienne a vu plus de 6000 m de sediments se deposer depuis I'Infracambrien jusqu'a I'Eocene. Lors de l'orogenese himalayenne, ces sediments ont ete decolles de leur substratum originel, dMormes et metamorphises de maniere differenciee suivant leur position. Ils reposent en contact tectonique sur la nappe cristalline du Haut-Himalaya. L'unite inferieure ou unite de Pughtal consiste, la ou elle est complete, en plus de 2500 m de sediments en partie detritiques terrigenes mais marque par l'edification de plates-formes carbonatees au Cambrien, Silurien et Carbonifere. Dans cette unite on releve deux grandes sequences sedimentaires separees par l'evenement epirogenique et magmatique tardi-Cambrien (500 rna), contrecoup de l'orogenese pan-africaine. Un niveau massif de vo1canites basaltiques permiennes ~ les Panjal Traps ~ forme la base ou sole de I'unite superieure (nappe de Zangla). Cette unite, plissee de maniere disharmonique, recouvre progressivement vers l'ouest des niveaux de plus en plus anciens de l'unite inferieure, niveaux eux-memes replisses en grands plis couches kilometriques a vergence nord. Dans la partie occidentale (Ringdom) l'unite superieure repose directement sur la nappe cristalline. Cette unite montre une serie sedimentaire avec des carbonates de plate-forme bien developpes au Trias superieur et au Lias puis des sediments surtout pelagiques et en partie detritiques terrigenes au Jurassique superieur et au Cretace. Des la fin du Cretace et jusqu'au Paleocene superieur s'edifie a nouveau une plate-forme peu profonde. La serie se termine par des couches continentales attribuees a l'Eocene. L'evolution geodynamique durant Ie Paleozoique et Ie Mesozoique est analysee. II en ressort que la sedimentation, a partir de I'Ordovicien, est regJee plus par des grands cycles eustatiques que par des mouvements tectoniques ou epirogeniques regionaux (les orogeneses caledoniennes, hercyniennes et cretacees des auteurs).

Modelling tourist itineraries in heritage cities: Routes around Old The District of Girona

Tourists do not follow random behavior in heritage cities, but they are consciously or unconsciously guided by socially constructed itineraries. This article studies the shaping of these itineraries in a heritage city (Girona), using the direct observation methodology during the visit (following the tourists from a prudent distance and gathering all the information about their visits) and the conventional questionnaire at the end of the visit. It also establishes which the sociodemographic, environmental and informative factors are that explain this behavior. The simultaneous use of the observation method and a questionnaire was found to be a useful technique for analyzing tourists' behavior and the factors that explain this behavior

Photographic rectification of the graphic documentation of historical and archaeological heritage: The case of the southern facade of the Praetorium tower in Tarragona (Tarraco, Hispania Citerior)

This article details the use of photographic rectification as support for the graphic documentation of historical and archaeological heritage and specifically the southern facade of the Torre del Pretori (Praetorium Tower) in Tarragona. The Praetorium Tower is part of a larger monumental complex and one of the towers that connected different parts of the Tarraco Provincial Forum, the politic-administrative centre of the ancient capital of Hispania Citerioris. It is therefore a valuable example of the evolution of Roman urban architecture. The aim of this project is to provide accurate graphic documentation of the structure to facilitate the restoration and conservation of the tower, as well as to provide a more profound architectural and archaeological understanding of the Roman forum. The use of photographic rectification enabled us to overcome the spatial and time difficulties involved in collecting data caused by the size and location of the building. Specific software made it easier to obtain accurate two-dimensional images. For this reason, in our case, photographic rectification helped us to make a direct analysis of the monument and facilitated interpretation of the architectural stratigraphy. We currently separate the line of research into two concepts: the construction processes and the architecture of the building. The documentation collected permitted various analyses: the characterisation of the building modules, identification of the tools used to work the building materials, etc. In conclusion, the use of orthoimages is a powerful tool that permits the systematic study of a Roman building that has evolved over the centuries and is now in a modern urban context.

Action Research : the first steps to start up a pilot experiment in heritage education

Peer-reviewed

Usability of Virtual Museums and the Diffusion of Cultural Heritage

Les prioritats per als museus canvien. La missió de la nova museologia és convertir els museus en llocs per a gaudir i aprendre, cosa que fa que hagin de dur a terme una gestió financera molt semblant a la d'una empresa social que competeixi en el sector del lleure. Amb el pas del temps, els museus han d'establir i aplicar els criteris necessaris per a la supervivència, aplanant el terreny perquè altres institucions públiques siguin més obertes en els seus esforços per comunicar i difondre el seu patrimoni. Ja podem començar a parlar d'algunes conclusions comunament acceptades sobre el comportament dels visitants, que són necessàries per a planificar exposicions futures que vegin l'aprenentatge com un procés constructiu, les col·leccions com a objectes amb significat i les mateixes exposicions com a mitjans de comunicació que haurien de transformar la manera de pensar de l'espectador i que estan al servei del mateix missatge. Sembla que internet representa un mitjà efectiu per a assolir aquests objectius, ja que és capaç (a) d'adaptar-se als interessos i les característiques intel·lectuals d'un públic divers; (b) de redescobrir els significats dels objectes i adquirir un reconeixement sociocultural del seu valor per mitjà del seu potencial interactiu, i (c) de fer ús d'elements atractius i estimulants perquè tothom en gaudeixi. Per a aquest propòsit, és bàsic fer-nos les preguntes següents: quins criteris ha de seguir un museu virtual per a optimar la difusió del seu patrimoni?; quins elements estimulen els usuaris a quedar-se en una pàgina web i fer visites virtuals que els siguin satisfactòries?; quin paper té la usabilitat de l'aplicació en tot això?

Géotourisme et utilisation de sites naturels d'intérêt pour les sciences de la Terre: les régions de Crans-Montana-Sierre (Valais, Alpes suisses) et Chamonix-Mont-Blanc (Haute-Savoie, Alpes françaises)

Résumé : Au travers de l'étude des régions de Crans-Montana-Sierre (Valais, Suisse) et de Chamonix-Mont-Blanc (Haute-Savoie, France), cette recherche considère les liens existants entre activités touristiques et sciences de la Terre. Ainsi, les sites géologiques et géomorphologiques pris en compte sont perçus comme ayant non seulement une valeur scientifique, mais aussi un intérêt scénique, culturel et économique. D'un point de vue (géo)touristique, différents modèles d'analyse sont proposés pour expliciter les composantes de l'offre et de la demande et comprendre le cycle de vie des objets étudiés. L'offre que constituent ces sites est tout d'abord présentée afin d'évaluer leurs différents potentiels, ainsi que l'utilisation spatio-temporelle, didactique et économique qui en est faite. Ensuite, les logiques d'acteurs sont analysées au travers des phases de valorisation, d'exploitation et de transformation, dans le but de comprendre les facteurs et les projets d'utilisation les concernant. Enfin, la demande des différents publics cibles, de même que leurs caractéristiques socio-touristiques et (géo)didactiques, sont discutées. Pour ce faire, des méthodes d'inventaire, d'évaluation, d'entretien et de questionnaire ont été utilisées, à différentes échelles d'analyse. On constate d'abord que le pôle des valeurs scénique et économique présente une plus forte mise à contribution, par rapport à l'utilisation didactique. De plus, le niveau de protection des sites ne restreint généralement pas leur exploitation, au contraire du facteur risque. Du point de vue des publics cibles, une forte demande d'explications didactiques est exprimée, s'orientant vers une approche multithématique des potentiels à mettre en valeur; des biens et services de base sont ainsi demandés. Enfin, force est de constater que seuls de grands projets peuvent rendre les activités (géo)touristiques rentables. A l'avenir, sachant que le géotourisme peut répondre à une demande touristique liée au rêve et à l'émotion, l'approche de l'offre devrait intégrer une réflexion en didactique des sciences de la Terre, d'autant que cette forme de tourisme tend à devenir une composante du développement économique régional, notamment en dehors de la saison d'hiver. Idéalement, l'utilisation touristique de la géodiversité devrait s'accompagner d'une politique de protection dynamique, combinant préservation et mise en valeur. A terme, le but ultime de cette entreprise est notamment d'élargir la notion de patrimoine culturel, pour favoriser une approche transdisciplinaire du paysage Abstract : Based on the study of the areas of Crans-Montana-Sierre (Valais, Switzerland) and Chamonix-Mont-Blanc (Haute-Savoie, France), this study considers the links between tourism activities and Earth science. Thus, the studied geological and geomorphological sites have not only a scientific va1ue, but also scenic, cultural and economic value. From a point of view of tourism, different models of analysis are examined in order to explain the components of the supply and the demand, and to understand the life cycles of the considered objects. The primary product of these sites is first presented, in order to assess their different potential as well as their didactic, economic, spatial and temporal use. The stakeholders' behaviour is then analysed to understand the factors and projected use, with the help of the optimisation, exploitation and transformation phases. Finally, the demand of the different target markets as well as their socio-tourist and (geo)didactic characteristics are discussed. To complete this study, methods of census, assessment, interviewing and questionnaire surveying are used, at different scales of analysis. The main results appear to demonstrate that the scenic and economic values present a higher value relative to the didactic use. Moreover, the required conservation measures for the studied sites do not generally restrict the use, on the contrary to the "risk" factor. From the point of view of the target market, a relevant requirement for explanatory commentary is expressed and tends towards an approach optimising different themes to utilise potential; basic popular goods and services are also requested. Finally, it is clearly demonstrated that only relevant projects are able to make this kind of activity profitable. For the future, geotourism may be marketed to a tourist demand for imagination and emotion. Consequently, the product approach should integrate a reflection on Earth science popularisation given that this branch of tourism tends to receive a component of the economic and regional development, notably during the summer period. However, the use of geodiversity should include a concept of dynamic management, taking into account conservation as well as tourism development. Thus, the final aim of this process is to r,r'iden the notion of cultural heritage, in order to stimulate a multidisciplinary approach to the landscape.

The coal bearing Cenozoic As Pontes Basin (NW Spain): Geological influence on its coal's characteristics

Lignite deposits in the Cenozoic As Pontes strike-slip basin (northwestern Spain)were formed as a function of specific paleoclimatic conditions and tectonic evolution of the basin.

3-D density structure and geological evolution of Stromboli volcano (Aeolian Islands, Italy) inferred from land-based and sea-surface gravity data

We present the first density model of Stromboli volcano (Aeolian Islands, Italy) obtained by simultaneously inverting land-based (543) and sea-surface (327) relative gravity data. Modern positioning technology, a 1 x 1 m digital elevation model, and a 15 x 15 m bathymetric model made it possible to obtain a detailed 3-D density model through an iteratively reweighted smoothness-constrained least-squares inversion that explained the land-based gravity data to 0.09 mGal and the sea-surface data to 5 mGal. Our inverse formulation avoids introducing any assumptions about density magnitudes. At 125 m depth from the land surface, the inferred mean density of the island is 2380 kg m(-3), with corresponding 2.5 and 97.5 percentiles of 2200 and 2530 kg m-3. This density range covers the rock densities of new and previously published samples of Paleostromboli I, Vancori, Neostromboli and San Bartolo lava flows. High-density anomalies in the central and southern part of the island can be related to two main degassing faults crossing the island (N41 and NM) that are interpreted as preferential regions of dyke intrusions. In addition, two low-density anomalies are found in the northeastern part and in the summit area of the island. These anomalies seem to be geographically related with past paroxysmal explosive phreato-magmatic events that have played important roles in the evolution of Stromboli Island by forming the Scari caldera and the Neostromboli crater, respectively. (C) 2014 Elsevier B.V. All rights reserved.

Improved predictive mapping of indoor radon concentrations using ensemble regression trees based on automatic clustering of geological units.

PURPOSE: According to estimations around 230 people die as a result of radon exposure in Switzerland. This public health concern makes reliable indoor radon prediction and mapping methods necessary in order to improve risk communication to the public. The aim of this study was to develop an automated method to classify lithological units according to their radon characteristics and to develop mapping and predictive tools in order to improve local radon prediction. METHOD: About 240 000 indoor radon concentration (IRC) measurements in about 150 000 buildings were available for our analysis. The automated classification of lithological units was based on k-medoids clustering via pair-wise Kolmogorov distances between IRC distributions of lithological units. For IRC mapping and prediction we used random forests and Bayesian additive regression trees (BART). RESULTS: The automated classification groups lithological units well in terms of their IRC characteristics. Especially the IRC differences in metamorphic rocks like gneiss are well revealed by this method. The maps produced by random forests soundly represent the regional difference of IRCs in Switzerland and improve the spatial detail compared to existing approaches. We could explain 33% of the variations in IRC data with random forests. Additionally, the influence of a variable evaluated by random forests shows that building characteristics are less important predictors for IRCs than spatial/geological influences. BART could explain 29% of IRC variability and produced maps that indicate the prediction uncertainty. CONCLUSION: Ensemble regression trees are a powerful tool to model and understand the multidimensional influences on IRCs. Automatic clustering of lithological units complements this method by facilitating the interpretation of radon properties of rock types. This study provides an important element for radon risk communication. Future approaches should consider taking into account further variables like soil gas radon measurements as well as more detailed geological information.

Rockfall susceptibility assessment and remote geological mapping with LiDAR point clouds

Characterizing the geological features and structures in three dimensions over inaccessible rock cliffs is needed to assess natural hazards such as rockfalls and rockslides and also to perform investigations aimed at mapping geological contacts and building stratigraphy and fold models. Indeed, the detailed 3D data, such as LiDAR point clouds, allow to study accurately the hazard processes and the structure of geologic features, in particular in vertical and overhanging rock slopes. Thus, 3D geological models have a great potential of being applied to a wide range of geological investigations both in research and applied geology projects, such as mines, tunnels and reservoirs. Recent development of ground-based remote sensing techniques (LiDAR, photogrammetry and multispectral / hyperspectral images) are revolutionizing the acquisition of morphological and geological information. As a consequence, there is a great potential for improving the modeling of geological bodies as well as failure mechanisms and stability conditions by integrating detailed remote data. During the past ten years several large rockfall events occurred along important transportation corridors where millions of people travel every year (Switzerland: Gotthard motorway and railway; Canada: Sea to sky highway between Vancouver and Whistler). These events show that there is still a lack of knowledge concerning the detection of potential rockfalls, making mountain residential settlements and roads highly risky. It is necessary to understand the main factors that destabilize rocky outcrops even if inventories are lacking and if no clear morphological evidences of rockfall activity are observed. In order to increase the possibilities of forecasting potential future landslides, it is crucial to understand the evolution of rock slope stability. Defining the areas theoretically most prone to rockfalls can be particularly useful to simulate trajectory profiles and to generate hazard maps, which are the basis for land use planning in mountainous regions. The most important questions to address in order to assess rockfall hazard are: Where are the most probable sources for future rockfalls located? What are the frequencies of occurrence of these rockfalls? I characterized the fracturing patterns in the field and with LiDAR point clouds. Afterwards, I developed a model to compute the failure mechanisms on terrestrial point clouds in order to assess the susceptibility to rockfalls at the cliff scale. Similar procedures were already available to evaluate the susceptibility to rockfalls based on aerial digital elevation models. This new model gives the possibility to detect the most susceptible rockfall sources with unprecented detail in the vertical and overhanging areas. The results of the computation of the most probable rockfall source areas in granitic cliffs of Yosemite Valley and Mont-Blanc massif were then compared to the inventoried rockfall events to validate the calculation methods. Yosemite Valley was chosen as a test area because it has a particularly strong rockfall activity (about one rockfall every week) which leads to a high rockfall hazard. The west face of the Dru was also chosen for the relevant rockfall activity and especially because it was affected by some of the largest rockfalls that occurred in the Alps during the last 10 years. Moreover, both areas were suitable because of their huge vertical and overhanging cliffs that are difficult to study with classical methods. Limit equilibrium models have been applied to several case studies to evaluate the effects of different parameters on the stability of rockslope areas. The impact of the degradation of rockbridges on the stability of large compartments in the west face of the Dru was assessed using finite element modeling. In particular I conducted a back-analysis of the large rockfall event of 2005 (265'000 m3) by integrating field observations of joint conditions, characteristics of fracturing pattern and results of geomechanical tests on the intact rock. These analyses improved our understanding of the factors that influence the stability of rock compartments and were used to define the most probable future rockfall volumes at the Dru. Terrestrial laser scanning point clouds were also successfully employed to perform geological mapping in 3D, using the intensity of the backscattered signal. Another technique to obtain vertical geological maps is combining triangulated TLS mesh with 2D geological maps. At El Capitan (Yosemite Valley) we built a georeferenced vertical map of the main plutonio rocks that was used to investigate the reasons for preferential rockwall retreat rate. Additional efforts to characterize the erosion rate were made at Monte Generoso (Ticino, southern Switzerland) where I attempted to improve the estimation of long term erosion by taking into account also the volumes of the unstable rock compartments. Eventually, the following points summarize the main out puts of my research: The new model to compute the failure mechanisms and the rockfall susceptibility with 3D point clouds allows to define accurately the most probable rockfall source areas at the cliff scale. The analysis of the rockbridges at the Dru shows the potential of integrating detailed measurements of the fractures in geomechanical models of rockmass stability. The correction of the LiDAR intensity signal gives the possibility to classify a point cloud according to the rock type and then use this information to model complex geologic structures. The integration of these results, on rockmass fracturing and composition, with existing methods can improve rockfall hazard assessments and enhance the interpretation of the evolution of steep rockslopes. -- La caractérisation de la géologie en 3D pour des parois rocheuses inaccessibles est une étape nécessaire pour évaluer les dangers naturels tels que chutes de blocs et glissements rocheux, mais aussi pour réaliser des modèles stratigraphiques ou de structures plissées. Les modèles géologiques 3D ont un grand potentiel pour être appliqués dans une vaste gamme de travaux géologiques dans le domaine de la recherche, mais aussi dans des projets appliqués comme les mines, les tunnels ou les réservoirs. Les développements récents des outils de télédétection terrestre (LiDAR, photogrammétrie et imagerie multispectrale / hyperspectrale) sont en train de révolutionner l'acquisition d'informations géomorphologiques et géologiques. Par conséquence, il y a un grand potentiel d'amélioration pour la modélisation d'objets géologiques, ainsi que des mécanismes de rupture et des conditions de stabilité, en intégrant des données détaillées acquises à distance. Pour augmenter les possibilités de prévoir les éboulements futurs, il est fondamental de comprendre l'évolution actuelle de la stabilité des parois rocheuses. Définir les zones qui sont théoriquement plus propices aux chutes de blocs peut être très utile pour simuler les trajectoires de propagation des blocs et pour réaliser des cartes de danger, qui constituent la base de l'aménagement du territoire dans les régions de montagne. Les questions plus importantes à résoudre pour estimer le danger de chutes de blocs sont : Où se situent les sources plus probables pour les chutes de blocs et éboulement futurs ? Avec quelle fréquence vont se produire ces événements ? Donc, j'ai caractérisé les réseaux de fractures sur le terrain et avec des nuages de points LiDAR. Ensuite, j'ai développé un modèle pour calculer les mécanismes de rupture directement sur les nuages de points pour pouvoir évaluer la susceptibilité au déclenchement de chutes de blocs à l'échelle de la paroi. Les zones sources de chutes de blocs les plus probables dans les parois granitiques de la vallée de Yosemite et du massif du Mont-Blanc ont été calculées et ensuite comparés aux inventaires des événements pour vérifier les méthodes. Des modèles d'équilibre limite ont été appliqués à plusieurs cas d'études pour évaluer les effets de différents paramètres sur la stabilité des parois. L'impact de la dégradation des ponts rocheux sur la stabilité de grands compartiments de roche dans la paroi ouest du Petit Dru a été évalué en utilisant la modélisation par éléments finis. En particulier j'ai analysé le grand éboulement de 2005 (265'000 m3), qui a emporté l'entier du pilier sud-ouest. Dans le modèle j'ai intégré des observations des conditions des joints, les caractéristiques du réseau de fractures et les résultats de tests géoméchaniques sur la roche intacte. Ces analyses ont amélioré l'estimation des paramètres qui influencent la stabilité des compartiments rocheux et ont servi pour définir des volumes probables pour des éboulements futurs. Les nuages de points obtenus avec le scanner laser terrestre ont été utilisés avec succès aussi pour produire des cartes géologiques en 3D, en utilisant l'intensité du signal réfléchi. Une autre technique pour obtenir des cartes géologiques des zones verticales consiste à combiner un maillage LiDAR avec une carte géologique en 2D. A El Capitan (Yosemite Valley) nous avons pu géoréferencer une carte verticale des principales roches plutoniques que j'ai utilisé ensuite pour étudier les raisons d'une érosion préférentielle de certaines zones de la paroi. D'autres efforts pour quantifier le taux d'érosion ont été effectués au Monte Generoso (Ticino, Suisse) où j'ai essayé d'améliorer l'estimation de l'érosion au long terme en prenant en compte les volumes des compartiments rocheux instables. L'intégration de ces résultats, sur la fracturation et la composition de l'amas rocheux, avec les méthodes existantes permet d'améliorer la prise en compte de l'aléa chute de pierres et éboulements et augmente les possibilités d'interprétation de l'évolution des parois rocheuses.

Emmy Noether: her heritage

Emmy Noether is my role model for the following reasons. She is one of the most important mathematician and physicists of the 20 century; She fought to be a scientist in times where women were not allowed to be one; She was a leader that gathered around her a large school of students and collaborators. In the lecture these reasons will be substantiated with historical facts. In addition, a general assessment of the significance of her ideas and works, from her times until today, will be advanced.